Issues with battery and home button replacement programme

Hi!
I've just found out I'm eligible for iPhone 5 battery and home button replacement programme. I have replaced screen after it broke, 2 months ago in an unauthorised service. Every single authorised service I've called refuses to replace them for free with an explanation that my phone is no longer eligible for free batt. and home button replacement due to unauthorised screen replacement that leads to warrantee loss .
My iPhone's warrantee has expired long time ago, since I've bought it in 2013. , but this mistake was made in a factory, prior to my screen replacement. What shall I do?

EpilepticaEnterBlitzman wrote:
Every single authorised service I've called refuses to replace them for free with an explanation that my phone is no longer eligible for free batt. and home button replacement due to unauthorised screen replacement that leads to warrantee loss .
Yes, that is correct. You can try asking if you can pay to replace the screen and see if they will then handle the other issues. But, I doubt they'll agree.

Similar Messages

Battery replacement and home button replacement?

how can i get my battery and home button replaced? because the home button does not work for long time, and battery is not very good now. and how much will it cost in total

Apple does not repair devices, they replace them.
For pricing information, go here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Select your country from the drop down list.
Select Express Replacement Service then "My iPhone is not Under Warranty".

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

Anyone else having issues with white iphone4 home button?

so i have come across this stuff here and there but i am pointing more towards people from India..
You all know how Pathetic apple is at India because of not having major share holding...
My White iPhone 4 purchased in july on the same date as launch in India has issues with the home button.. It sometimes becomes unresponsive.. Stays like that for 5-15 seconds as it varies and then starts working..
I don't understand if it is hardware or software issue.. Sometimes for weeks it doesn't happen and then it could happen way too much... i went to the iStore guys and they told me to restore it as its a software issue..
I wanted to know if any of you faced that and what did you do? did you get a replacement? since it happens occasionally i cant show the store guys that it is happening so they won't replace.

My experience with home button:
Mine did not work sometimes also; but I found this was due to "how" i was pressing the button. There must have been some dust under it because if you pressed it in a certain place; the button would press in but this would not register until you pressed really quite hard.
Pressing in any other place and the click seemed to register.
Try it and see if it is the same for you? Can you press your button in a place and it doesnt register (mine was at the top of the white square on the button)...
I had mine replaced under warranty from my Apple Store.

My ipad battery and home button are broken but I have no insurance

I got a keyboard for my ipad and since using it the battery has gone. It takes around 8 hours to charge and the drains in 1 hour. You can't use it whilst it is charging either. Also the button has stopped working so I can't use that. Does anyone have a rough idea on how much this will cost as I have no insurance on it? Thanks

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

Issues with 'next' and 'previous' buttons grayed out in 'Preview'

First off.. HELLO MAC FORUM!! Woo hoo!!
I just got a MacBook Pro and I'm LOVING it.. I'm having one small issue that I can't find help with after googling.. when I'm in 'Preview' viewing pics my 'next' and 'previous' buttons are grayed out and I've looked in preferences and don't see where to change this so that I can click through the pics in a folder.. it's pretty annoying and there absolutely HAS to be a way to get this going.. help please!!

WHEN 'NEXT'.
      PERFORM scroll_end.
WHEN 'PREVIOUS'.
     PERFORM scroll_left.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_7100 INPUT
*&      Form scroll_end
      text
     -->RT_COLUMNS text
form scroll_end tables rt_columns type kkblo_t_columns.
ENDFORM.
*&      Form scroll_left
      text
     -->RT_COLUMNS text
form scroll_left tables rt_columns type kkblo_t_columns.
ENDFORM.
i've tried this....the previous error gone..but now i have another error said " the type kkblo_t_columns. is unknown ".
really exhausting :P

Having issues with longMessage and back button usage

Hello,
I have part of an app that consists of 2 pages. The first page is a set of checkboxes and an Analyze (submit) button. when the user hits Analyze, I commit the transaction and forward to the second page which displays the checkboxes they checked and some other information regarding those choices. If a user wants to change their answers, they use the browser's back button and change their choices, then click Analyze again. This is working fine.
I now want to add a longMessage to each checkbox above with some additional information about each choice. I've setup these up and they work fine; the dialog box launches just fine when they click the little (i) icon.
So that's the status quo; here's my problem:
Scenario
1. User clicks one of the longMessage icons
2. clears that box by clicking OK
3. then hits Analyze to progress to the second page
4. now user hits browser's Back button to go back to questions
5. PROBLEM
At this point, all my checkboxes are blank. If I try to re-check one and hit Analyze, I get an error stating "No current row for View (XXXLProcNavVO1)"
If I don't ever click a longMessage icon, everything works fine. I can only replicate this if I follow the exact steps in the scenario.
So what is wrong? Why am I losing my current row in my VO when I use the longMessage?
I've included my CO from page 1 for reference below.
Thanks!
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package lanl.oracle.apps.icx.por.req.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
//import oracle.apps.fnd.framework.webui.OADialogPage;
import oracle.jbo.domain.Number;
import oracle.jbo.Row;
import oracle.apps.fnd.framework.OARow;
* Controller for ...
public class LANLProcNavCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("XXXLProcNavVO1");
if (!pageContext.isBackNavigationFired(false))
// We indicate that we are starting the create transaction (this
// is used to ensure correct Back button behavior).
TransactionUnitHelper.startTransactionUnit(pageContext, "createProcNavForm");
// This test ensures that we don't try to create a new doc if
// we had a JVM failover, or if a recyled application module
// is activated after passivation. If these things happen, BC4J will
// be able to find the row that you created so the user can resume
// work.
if (!pageContext.isFormSubmission())
am.invokeMethod("initPVO");
String stringReqHeaderId = pageContext.getParameter("REQ_ID");
Number defaultReqHeaderId = null;
try
defaultReqHeaderId = new Number(stringReqHeaderId);
catch(Exception e)
throw new OAException("ICX", "XXXL_INVALID_NUMBER");
// set this value for subsequent form buttons pressed
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0,defaultReqHeaderId);
vo.executeQuery();
if (vo.getRowCount() == 0)
vo.insertRow(vo.createRow());
Row voRow = (Row)vo.first();
voRow.setNewRowState(Row.STATUS_INITIALIZED);
voRow.setAttribute("ReqHeaderId",defaultReqHeaderId);
OAViewObject pvo = (OAViewObject)am.findViewObject("LANL838cPVO1");
OARow prow = (OARow)pvo.first();
prow.setAttribute("lReqID",stringReqHeaderId);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("XXXLProcNavVO1");
// Pressing the "Apply" button means the transaction should be validated
// and committed.
if (pageContext.getParameter("Analyze") != null)
// Simply telling the transaction to commit will cause all the Entity Object validation
// to fire.
// Note: there's no reason for a developer to perform a rollback. This is handled by
// the framework if errors are encountered.
am.invokeMethod("apply");
// Assuming the "commit" succeeds, navigate back to the prev page with
// and display a "Confirmation" message at the top of the page.
TransactionUnitHelper.endTransactionUnit(pageContext, "createProcNavForm");
// OAException confirmMessage = new OAException("XXXL", "XXXL_PROCNAV_CREATE_CONFIRM", null, OAException.CONFIRMATION, null);
// Per the UI guidelines, we want to add the confirmation message at the
// top of the search/results page and we want the old search criteria and
// results to display.
// pageContext.putDialogMessage(confirmMessage);
vo.clearCache();
vo.reset();
pageContext.forwardImmediately("OA.jsp?page=/lanl/oracle/apps/icx/por/req/webui/LANLSupplDocSummaryPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
else if (pageContext.getParameter("Cancel") != null)
am.invokeMethod("rollbackDoc");
// Indicate that the Create transaction is complete.
TransactionUnitHelper.endTransactionUnit(pageContext, "createProcNavForm");
pageContext.forwardImmediately("OA.jsp?page=/oracle/apps/icx/por/req/webui/ShoppingCartPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
}

Hi
in this scenarion control is not going inside the condition
if (vo.getRowCount() == 0) and therefore VO is not getting initialized
why u are counting the row of VO to initialize the VO ,if possible pls remove this condition check ,problem will be solved .pls let me know in case of any issues.
thanx
Pratap

Pass/Fail issue with Quiz and Click Buttons

Got a complicated one for ya!
I have a project that has about 100 quiz questions. I want to add slides with an image for backgrownd, a voice over and a "Click Button" to be used like a Simulation. If the "Click Button" is not clicked on, I want the slide to act like a Quiz and be marked as wrong.
At the end of the Quiz I want the Pass/Fail function to be: If Pass: "Continue" then if Fail "Jump to Slide". This Failed Slide would jump to the last slide; the end of the project with a "Thank you". If Passed, the project continues to display more information on other slides.
The tests I have done the Pass/Fail seems to not be working. If failed, the project continues just like the Passed even though the "Pass/Fail" options are marked correctly.
What do you think?

Also check the options under Quiz > Settings > Required. It could be that you have it set to something other than Optional which might be restricting things.

Hold down sleep and home buttons to get power back to iPad 4 but nothing happens

My iPad 4 was purchased 11/2013. It's in pristine condition. A few weeks ago i opened a email from a known source. The screen vertical hold went loopy and then powered-off. I held the sleep and home buttons and restarted and everything good. Weeks later IOS 7.0.2 update loads. The next day I'm in my FaceBook sending a message and the iPad does the same crash. Screen flips out, goes to blue then black. When I try to reboot with sleep and home button, Apple logo appears, stays locked on screen. I end-up at Apple Store. They do a restore from a previous version. Go home and same sceanrio. Back to Apple Store. This time they restore to like new system. I'm going to have reload all apps and books, etc., - no big deal, but I have to charge battery to do. I put on charger. Few hours later when I take off the charger the iPad will not power on at all. Any ideas out there?

You could try restoring the device again on your own and see of that does any good, but Apple has the capability to restore software by more sophisticated means than we every day users have. My point is that if it were me, I would take it back to the same Apple Store, with the receipt, explain the situation and politely start pushing for a replacement device.
This one seems like it will just cause problems for you moving forward and while it's still well within warranty limits, return it.

My iphone won't switch on. I've tried holding the power and home button more than 30 seconds up to a few minutes but it didn't switch on and went straight to recovery mode. It died of a low battery and i already fully charged it i checked with my itunes.

i really need help here. I have only used my iphone for a month. my iphone won't switch on. it died of a low battery and i've already fully charged it and usually before it even fully charged, it will turn back on right but in my case nothing happened. i've tried holding the power and home button for 30 seconds and up to 2-3 minutes but no logo appear. it went straight to recovery mode. there's nothing wrong with my cable, i checked with itunes and this happened once a week ago but it did switch back on after i tried a few times but now it just won't switch on. i also have problems with my screen as there's some noises to the screen (i hope you get me) and when i turned the camera on, it was as if the whole screen is shaking. i'm currently studying in the middle east and there's no apple store here so i cannot use my warranty. i will only be back home in summer. please help me what should i do to at least switch my iphone on first.

I did a little bit of experimenting. I have an iPad original versions myself. I took it out of the box knowing that I haven used it in months and I expected the battery to be dead and sure enough the battery was as dead as I imagined it would be. For the first 30 minutes I experienced exactly what you are experiencing, but then the iPad suddenly powered up on its own (like it does when plugged into the charger) and I am using it now to type this response to you.
My point is that I am starting tothink that your battery has suddenly died on you for some reason or you have a hardware problem now. I would still try leaving the iPad charge for a while longer - maybe even overnight - and then try again in the morning. Unplug the iPad and try resetting with the home and sleep buttons. Try plugging the iPad in again. Unplug it, try restarting again. Let it charge for a while again.
After trying something like that, if it still will not start up, then I think it's time for a trip to an Apple Store and see what the Apple Techs think.

My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

i have the same problem...my ipod is 4th generation?uggghhhhh

My Ipad 1 doesn't charge even after 5 hours of charging. I tried pressing the power and home button to reset it (even tried toggling the mute button a few times), but It doesn't start up with the apple logo. Anyone has any ideas what else can I try

a have tried everyting now a dont have a clue what too do??

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good. If your computer/iTunes does not recognize the iPad, then the cable is probably bad.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
The Ultimate Guide to Solving iOS Battery Drain
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Poor battery life after installing iOS 7.1? Try these simple tips
http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Charging Tip - Switching to airplane mode turns off battery-draining wireless and cellular access, allowing your iPhone/iPad to recharge up to twice as fast.
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

What is going on with the Iphone4 home button. I see lots of people having issues, but not resolution. I am running 4.2, but based on what I have read, 4.3 does not help. Apple has to do something about this, as it is affecting lots of people.

What is going on with the Iphone4 home button locking up? I see lots of people having issues with the button becoming unresponsive, but no resolution.
Suggestions include:
Upgrade
Restrore
ReSync
Push harder,
etc.
I am running 4.2, but based on what I have read, 4.3 does not help. Apple has to do something about this, as it is affecting a large portion of the user community.

lfossier1 wrote:
Apple has to do something about this, as it is affecting a large portion of the user community.
No they do not and no it is not affecting a large portion of the user community.
If it is an actual hardware issue, the only fix is to repair or replace the hardware.
If it is a software issue, restoring as new will fix it.

My iphone 4s not turnong on...pluged the charger display shows red battery sts bar but after holding power and home button it doesnt reboot:(

Hi,,
Read post on this but tried holding power and home button the screen balckens out and then when pressed power button the display show red battery sts bar...need help as not used my gadget for the past two days and i m feeling lonely...pls pls reply to my mail id [email protected]
pls pls

What on earth do you mean by shattered? Can you post a picture?
It's always possible that the connector was damaged but not to the point that chargers wouldn't work. With continued use, the damage got worse until the connector could no longer feed electricity into the phone.
It sounds to me like you need to get your phone replaced but only the folks at an Apple store can say for sure.
~Lyssa

Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

Issues with battery and home button replacement programme

Similar Messages

Maybe you are looking for