Issues with Beta Tester Tools on Firefox mobile

I just downloaded Firefox Mobile Beta 1 on my Droid 2. I remember seeing the "Beta Tester Tools" in an earlier build of fennec so, I tried to install it and I'm running into some issues.
I first downloaded "fennec-4.0b1.source.tar.bz2" from http://releases.mozilla.org/pub/mozilla.org/mobile/releases/latest-beta/source/. I then located "[email protected]" in "mozilla-central/mobile/app/profile/extensions/".
I compiled the extension like I had for some of the one that I've worked on. I created a site using the guide https://developer.mozilla.org/en/Installing_Extensions_and_Themes_From_Web_Pages
and uploaded the files to my MobileMe iDisk. Everything showed up perfectly (don't mind the 2nd link, I was trying to install the Firebug beta as well).
http://web.me.com/celebi23/extensions/index.html
It installed & is showing up in my Add-ons menu. The Beta icon, however, is not showing up in the Toolbar. Any help would be greatly appreciated.

mbrubeck, thank you. I was just trying to figure out if Beta Tester Tools could be installed in Firefox 4 Beta 1. I guess the Beta Tester Tools were disabled in Beta 1. Thanks for the response though.

Similar Messages

  • I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

    I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

    artisttouch,
    If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
    To solve it, you may try the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save curent artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • BW hierarchies issue with BOBJ Reporting tools

    Hi All,
    Brief about the requirement:
    Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
    Initial Road map planned for implementation was
    o     to use Crystal for operational and formatted reporting
    o     to use WebI for Ad hoc and interactive reporting
    o     to use Xcelsius for Dashboards
    Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
    What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
    And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
    Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
    Thanks & Regards,
    Bala

    Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
    XI 4.x supposedly resolves mots issues but here again details are not known.
    I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

  • Ajax Testing issue with e-Tester

    I'm new to using Empirix and we are using it to work with a new site that uses Ajax. I have recorded the script fine but there is an issue with the Link that needs to be clicked on that it will either always change or the index will change. I've tried to use a wild card after the number in the link that always stays the same but when I run the tests it always shows "Used secondary attribute 'index' ". Is there a way to get this to stop showing every time or get it to always use this attribute?
    Thanks,

    Hi,
    <br>There are two different issues here:
    <ol style="margin-top:0px;">
    <li> The link that will be clicked will always change or the index will change.
    <li> e-Tester is always using the secondary attribute "index"
    </ol>
    Let me issue #2 first since its easier to explain.
    <h2 style="color:navy"> e-Tester is always using the secondary attribute "index"</h2>
    <h2 style="color:navy">* For scripts that are not created yet:</h2>
    In order to change the order that e-Tester records the use of attributes you can go to:
    <br> <font style='color:navy'>e-Tester &raquo; Options &raquo; Current Script</font>
    <br> Then on the left side of the Current Script Options window go to:
    <br> <font style='color:navy'>Recording &raquo; Object Identification</font>
    <br>The following image presents how the screen looks like:
    <br><img src="http://qazone.empirix.com/servlet/JiveServlet/download/25-518-1621-527/upanddown.jpg">
    <br>
    Notice the bottons with arrows that are on the right side of the window. Use those to determine which attribute should be used first when recording the script.
    <h2 style="color:navy">* For existing scripts:</h2>
    Go to the page where resides the action of clicking the script, expand the page, <font style='color:navy'>right click on the Address Node</font> and select properties(a new window will appear), double click on the action that is making the click to the link (a new window called Event Properties will appear). In this new window click on the Attributes tab. The following image presents how the Event Properties window looks like:
    <br><img src="http://qazone.empirix.com/servlet/JiveServlet/download/25-518-1621-528/upanddownattributestab.jpg">
    <br>Notice the bottons with arrows that are on the right side of the window. Use those to determine which attribute should be used first when playing back the script.
    <br><br>I will create another post in order to answer the other issue. I need to organize my ideas.
    <br><br>Regards,
    <br>Zuriel

  • Repeated issues with Adobe Flash and Facebook Firefox 6

    I have had repeated ongoing issues since upgrading to Firefox 6. Adobe Flash crashes repeatedly, even after installing the newest. In particular having a ton of issues with Facebook. It all works fine in IE, so have narrowed it down.
    I think I would just like to go back to Firefox 5. Is that available somewhere?

    Anyone able to help please?
    Thanks.

  • WIN10 issues with HP Protect Tools Security Manager

    WIN10 won`t install on PC´s with  HP Protect Tools Security Manager (WIN7), as it is incompatible with WIN10 install. program reuires that HP Protect Tools will be uninstalled before proceeding with installation of WIN10. However, this seems to be quite impossible. Just disabling the program with the stemps described earlier does not work. Has anyone info how to UNINSTALL completely the HP Protect Tools Security Manager? I guess HP will notice this issue soon because there are many HP PC owners with WIN7 (probably even WIN8) that are unable to install WIN10,  and  make steps to create a new with WIN10  compatible version  of the Tools Sec. manager, but it will probably take some time.

    Try update your system with HP SoftPaq Download Manager and reinstall Win10.The problem was my old version of HPPTSM. With 8.3.3.... works.My HP 6470b, Win7 64.

  • UI issues with beta 8

    First off, let me confirm that the correct way to upgrade from beta 7 to beta 8 was just to install beta 8 on top on beta 7. Is that correct or should I have deleted beta 7 first?
    If that's correct, then I am having a whole bunch of issues.
    First issue: My basic Tab Bar Controller application does not display (in the simulator) the UIView the first time you visit the tab but does display it the second time you visit a tab. Anyone every seen this and if so any ideas on the root cause?
    Second issue: Once the view does display, I am having some issues with controls. When I try to add "IBOutlet NSTextField* distanceLabel;" to my interface for the view controller (subclassed from UIViewController), the compiler flags this with "syntax error before NSTextField". Am I missing some special syntax sugar for the iPhone here?
    Third issue: I have hooked up a button "touch up" event to a method in my controller with this signature: "- (IBAction) start:(id)sender;" This hooks up all nice and good but when the button is pressed, the app crashes in GDB with a selector not found error.
    Anyone seen this with beta 8 or otherwise?
    Thanks,
    Tim

    Actually, i just notice this in GDB. This looks like a problem -- has anyone ever seen this before?
    This GDB was configured as "i386-apple-darwin".warning: Unable to read symbols for "/System/Library/Frameworks/UIKit.framework/UIKit" (file not found).
    warning: Unable to read symbols from "UIKit" (not yet mapped into memory).
    Program loaded.
    I also reformated my dev machine and clean installed beta 8 so I am pretty sure that is not the issue now...
    Tim

  • Are there any known issues with the epub plugin causing firefox to revert search engine back to yahoo and then disabling the ability to change search settings?

    My wife recently added a plugin, epub reader. Upon starting up Firefox the next day she noticed that the default search engine was changed back to Yahoo after we previously fixed this. Furthermore the ability to change search settings was grayed out. After epub reader was removed the problem was solved. I am surprised that I am unable to find anything written to this end about epub reader. Is this a tool promoted and distributed by Yahoo?
    Incidentally, how much would each user need to contribute to get mozilla away from Yahoo? Yahoo is, in my opinion, little more than an advertising vehicle, and not a real search engine.

    I went to Costco today and asked long known VZW Kiosk rep re what phone would he recommend...DX, DI or Fascinate.
    Not to my surprise, I was told that DX is the best of those three. Given the fact that all three is the same price $199, it indicates that is has nothing to do with price.
    When I acquired him about how Fascinate sales going, rep told me that since that phone went for sale this Thursday, local Costco only sold 10 Fascinate but that not all...7 of them were returned back to Costco by Saturday. That is a 70% return rate which seems to be way too high for the high level smartphone.
    At the same time, local Costo VZW kiosk can't keep up with demand of the DX, they are being sold out as soon as they are getting them. I am not advertising for DX here as I am myself briefly owned DX as soon as it was released and its problem with reboot forced me to return it as I didn't want to deal with replacement as I had bad experience in the past two years with VZW replacing my phones every two to three month with replacement phone being worse then the one that is being replaced.
    There is no such a thing as a perfect smartphone (sorry to all iPhone fans) but VZW should take a special "achievement" award for screwing up such a wonderful phone as Galaxy S.
    I can only hope that either DX with 2.2 will be better than the one with 2.1 or I will wait for what is coming up with HTC in November. 

  • Issues with nokia configuration tool 5.0 - E72

    I wanted to install a new profile and save the old one for a few people.
    Since typing on the PC is much easier, I hoped I could use the configuration tool
    After reading the data it lost contact and couldn't find my phone again.
    A new try after running PC-Suite 7.1 first:
    it finds my phone (with latest firmware) but cannot import / read any data
    Any ideas?
    By the way: the change language options doesn't work (only English has been installed)

    Hi,
    I am experiencing similar issue: from PC Suite v 7.1.40.6 I can see the Nokia E72-1 mobile phone, from the Nokia Configuration Tool v 5 I can also see the Nokia E72-1 but from the Configuration Tool I cannot Edit Online the mobile phone and I cannot push a configuration either. This is weird !
    Also, wether the phone is connected through USB or Bluettooht, I get the same results.
    Anyone has an idea why this happens and how to solve the situation ?
    Regards,
    Bluea.

  • Issue with FileReference.load() on Mac/Firefox 3.6/FlashPlayer 10.0.45.2

    Hey there,
    After several days of banging my head against my desk trying to figure out what my application is doing wrong, I think I stumbled across a problem that either I'm not handling correctly in my code or that is a bug in the Flash Player plugin for Firefox on the Mac (and on Linux).
    Here are my specs:
    MacBook Pro with Snow Leopard 10.6.3
    Firefox 3.6.3 w/ Flash Plugin 10.0.45.2
    Safari 4.0.5 w/ Flash Plugin 10.0.45.2
    FlashBuilder 4.0 (272416)
    Flex 3.5 SDK
    I can't post the code I've been working on as it's for a work project; however, I found something on Adobe's site that manifests this problem:
    http://www.adobe.com/devnet/flash/quickstart/filereference_class_as3/
    If you open up this page in Firefox 3.6 on the Mac, you may notice that the crop box doesn't work properly (or at least I noticed this behavior).  What I would see is that the crop box would immediately fill to the lower right hand corner.
    Open up the same link in Safari and it works properly.
    The following is what I've noticed in my debugging efforts on my own application:
    After completing a FileReference.load call, the Flash application appears to lose focus (perhaps to the operating system?)
    Moving the cursor (both in my case and I think in the example on the site) results in getting undefined (and astronomical) values back when you poll for the mouse cursor's position.
    Clicking outside of Firefox and clicking back in seems to resolve this.  It seems like leaving the window and returning solves the problem.
    To provide another example of this behavior, I've altered some code that does a similar function to the example on Adobe's site to produce some statistics about where the mouse cursor is:
    The code example:
    http://blog.flexexamples.com/2008/08/25/previewing-an-image-before-uploading-it-using-the- filereference-class-in-flash-player-10/#more-766
    My code (my changes are bolded):
    <?xml version="1.0" encoding="utf-8"?>
    <!-- http://blog.flexexamples.com/2008/08/25/previewing-an-image-before-uploading-it-using-the- filereference-class-in-flash-player-10/ -->
    <s:Application name="FileReference_load_test"
                   xmlns:fx="http://ns.adobe.com/mxml/2009"
                   xmlns:s="library://ns.adobe.com/flex/spark"
                   xmlns:mx="library://ns.adobe.com/flex/halo"
                   xmlns:net="flash.net.*" xmlns:mx1="library://ns.adobe.com/flex/mx"
                   creationComplete="init()">
      <fx:Script>
        <![CDATA[
          import mx.controls.Alert;
          import mx.utils.ObjectUtil;
          [Bindable]
          private var appX:Number;
          [Bindable]
          private var appY:Number;
          private function init():void {
            addEventListener(MouseEvent.MOUSE_MOVE, handleMove);
          private function handleMove(event:MouseEvent):void {
            appX = event.localX;
            appY = event.localY;
          private function btn_click(evt:MouseEvent):void {
            var arr:Array = [];
            arr.push(new FileFilter("Images", ".gif;*.jpeg;*.jpg;*.png"));
            fileReference.browse(arr);
          private function fileReference_select(evt:Event):void {
            fileReference.load();
          private function fileReference_complete(evt:Event):void {
            img.source = fileReference.data;
            Alert.show(ObjectUtil.toString(fileReference));
        ]]>
      </fx:Script>
      <fx:Declarations>
        <net:FileReference id="fileReference"
                           select="fileReference_select(event);"
                           complete="fileReference_complete(event);" />
      </fx:Declarations>
      <s:Panel id="panel"
                horizontalCenter="0"
                verticalCenter="0"
                width="500">
        <s:layout>
          <s:VerticalLayout />
        </s:layout>
        <mx1:Image id="img"
                  verticalCenter="0"
                  horizontalCenter="0"
                  maxWidth="200"
                  maxHeight="200" />
        <mx1:ControlBar>
          <s:Button id="btn"
                     label="Browse and preview..."
                     click="btn_click(event);" />
          <s:Button label="Upload..."
                     enabled="false" />
          <s:Label text="MouseX:" />
          <mx1:Text text="{appX}" />
          <s:Label text="MouseY:" />
          <mx1:Text text="{appY}" />
        </mx1:ControlBar>
      </s:Panel>
    </s:Application>
    If you compile and run this application in Firefox, you should see that the X and Y values for the mouse stop updating after the file is loaded.  On Safari they continue to update.
    I couldn't find any reference to this problem searching on Google (perhaps not the right keywords?).
    Anyone have any input on this issue?  Any help is appreciated

    Updates:
    I've opened a bug with Adobe regarding this issue:
    http://bugs.adobe.com/jira/browse/FP-4362
    Also, the Cancel operation on a FileReference causes the same issue to happen as does loading.  I really think it's an operating system focus issue.
    UPDATE:
    Looks like this has already been tracked and is scheduled to be fixed:
    https://bugs.adobe.com/jira/browse/FP-2785

  • Is anyone having issues with Windows 8 phones not loading mobile versions of websites?

    I was just wondering if anyone with a Windows phone is having problems loading the mobile site version of a Muse site when viewed on the phone? or if there is a known bug or incompatability?

    Hello, same issue for me.
    The site display whith the desktop version.

  • PC is blocked after doing a manual or automatic update of my anti-virus SW (VIPRE) when firefox is open. No issue with other browsers or is firefox is not active

    I just switched over to Mozilla Firefox letest version 3.6.13 (before I used Google Chrome). It's running fine BUT ....
    if firefox is open and at the same time there is an (automatic or manual) update of my anti-virus SW (I use VIPRE) the update is done but afterwards my PC is blocked. Looking to the running processes I see that "System Idle Process" takes 98%. I can't do anything else with my PC, it reacting VERY slowly. To stop it I have to END firefox using "ctl-alt-del". It makes me nervous.
    With other browsers (used IE and Google Chrome) or in case I dont use firefox there is no issue at all.

    I just switched over to Mozilla Firefox letest version 3.6.13 (before I used Google Chrome). It's running fine BUT ....
    if firefox is open and at the same time there is an (automatic or manual) update of my anti-virus SW (I use VIPRE) the update is done but afterwards my PC is blocked. Looking to the running processes I see that "System Idle Process" takes 98%. I can't do anything else with my PC, it reacting VERY slowly. To stop it I have to END firefox using "ctl-alt-del". It makes me nervous.
    With other browsers (used IE and Google Chrome) or in case I dont use firefox there is no issue at all.

  • Mysterious issues with the pen tool in flash (CS3 & CS4)

    i have searched tirelessly for the answer to this problem and still have no answer. when using the pen tool to create shapes, occasionanally when i click to add the next point the line segment jumps over to a previously added point. also, sometimes when i add a point, the point mysteriously starts moving on the screen all by itself. i have used illustrator for many years and it's pen tool is perfect in so many ways and it is counterproductive to have to jump to illustrator to do any pen tool work and then import it into flash
    anybody have this issue or know why this might be happening?

    Hello
    I have the same issue. I think it is a bug.
    Sometimes when I  delete points with <delete> key on keyboard, flash also deletes randomly frames on locked layers with all of its contents.
    You have to start tricking over these issues, if you do not want to be nervous. Like using a one key -shortcut substitute of Ctrl+Z
    Sometimes it's happening, because there are not perfectly overlapping shapes on each other on one layer, .
    Sometimes because there are a parenting issue, flash sometimes breaks, if you draw to deep under the "root" of the
    project.
    Or if you have a lot of vectrice on one layer. But I am just guessing too.

  • Issue with Beta Zone account

    I'm not sure if this is where I need to post this, but I am hitting a dead end trying to find help.
    I had to reset my BlackBerry ID due to to many PIN changes.  What I did was change the email address on the account that had too many changes, and recreate a new BlackBerry ID with my usual email.  This caused me to have to pay again for some downloaded apps and I lost my BBM contacts as well.
    I haven't logged into Beta Zone in quite some time, but decided to see if I could get BBM for Android.  I used to be able to login with a username and password, but now it requires a BBID (which is understandable) but when I try to login, it needs my BBID and when I try to go to https://beta.webapps.blackberry.com/defaults/bbidlink it has my email address in the username field and I can't change it.  I even tried to create a new Beta Zone ID and it says my email address is already in the system.
    I sent an email to [email protected] a week or two ago and got no response.  I also sent a tweet to @BlackBerryHelp this morning.  I really need to get this straightened out.  So if anyone can help me, I would really appreciate it.
    Thanks!
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    Massonite wrote:
    I used to be able to login with a username and password, but now it requires a BBID (which is understandable) but when I try to login, it needs my BBID and when I try to go to https://beta.webapps.blackberry.com/defaults/bbidlink it has my email address in the username field and I can't change it.
    That is not at all what I experience. When I go to that link, I have to first press the "Sign In" button, and then I'm presented with fields to enter for my BBID. Anything that is pre-populated to those fields is being done by your browser...by default, those fields are always empty, and the site is actually coded to prevent most standard ID/password saving methods from working. So, anything that is in those fields now is being done by your browser or some ID/password assistant you have installed...not by the site itself. Not being able to change it is even more of such an indicator that something local to you is in control here.
    Massonite wrote:
    I even tried to create a new Beta Zone ID and it says my email address is already in the system.
    Which would be logical if you previously created a BBID with that email address -- there can be only one BB ID account per email address.
    Massonite wrote:
    I sent an email to [email protected] a week or two ago and got no response.  I also sent a tweet to @BlackBerryHelp this morning.  I really need to get this straightened out.  So if anyone can help me, I would really appreciate it.
    The issue isn't with the site, it's with your BB ID as well as your local browser and whatever add-on ID/password helper you have installed. I've no idea what your browser is nor what your ID/password helper is...you'll need to figure those out locally. Or try installing a different browser that does not have such an add-on and, if you know your BB ID credentials, you should be able to access them.
    BB ID is sort of a "single sign on" for multiple BB-related products and services, so the core of your issue is with that rather than the specific site you were trying to access. And your local browser issue is I think really at the root of it all.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Issues with Rectangular Marquee Tool [was: I have a question]

    The problem is with the 'rectangular marquee tool'  ... after I select a box, the tool defaults to a marquee that eliminates a portion of the first selected box.  The curser changes to show the '+' curser with an 'x' in the lower right of the cursor ... how do I get rid of this?

    It sounds like you have Intersect with selection enabled in the tool options bar instead of the default of New selection.
    Though it sounds like you want to add to the prevous selection?
    I usually just leave the default of New selection and use the following keyboard shortcuts instead of clicking on different options in the tool options bar.
    http://help.adobe.com/en_US/photoshop/cs/using/WSD578BD7D-07BC-46f6-AAC2-6E491E8AD818a.htm l#WSB7273C71-12FE-4f05-8E2C-D4A571E0692Ba

Maybe you are looking for