Issues with BW conn. while upgrading source system from R/3 4.6 to ECC 6.0

Hello
We are upgrading our existing R/3 4.6 system to an ECC 6.0 system. In this regard, I have a few questions concerning R/3 to BW extractions.
Question 1: If we have a PROD BW system PB1 mapped to a PROD 4.6 R/3 system PR1. And then we make a copy of PB1 and call it DB1. Will we get all the transfer rules mapped between DB1 and PR1 automatically.. or do we need to re-create all the transfer rules again?
Question 2: Lets say we now want to connect our ECC 6.0 DEV system ie DE1 to DB1, do we need to re-create all the transfer rules between these 2 clients?
Thanks.
Srinivas.

Hi Srinivas,
questions 1:
no need to create again...they will link up that..it is nothing but Mirror concept...
question 2 :
This one laso no need to craeted....
So your issue is solved,post me if you have any furthur...
Regards
Srinivas

Similar Messages

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Facing issue with SSO communication after Upgrade to SAP EP7.31

Hi Experts,
This is happening post upgrade of system from 7.0 to 7.31. We are using SSO to connect ECC(back-end system) in two ways, logon Ticket and User-Mapping
Issue:
When we click on a tab, lets say "A tab/ User Administration Tab" which uses User-Mapping to communicate with back-end system and clicking on another tab say, "B tab / Content Administration Tab" in portal which uses Logon Ticket to communicate with back-end system.
When both the tabs are clicked one after the other the SSO communication should be different, but in our case it uses the same SSO communication for all the back-end communication, which does not delete the cookies / uses the different SSO mode of communication when clicked on the other tabs.
Kindly help to solve this issue.
Thanks,
Preetha Balan

Hello Preetha,
Go to SAP Service Marketplace - Home -> Services and Support (from the menu) -> Report a product error (on the right side under "Need technical assistance?")
In the meanwhile you can also search for a solution in the SAP notes in the same place but go to the link above "Search for SAP Notes and SAP Knowledge Base Articles.
Best regards,
Donka Dimitrova

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Crash issues with elements organizer while running Apple OS 10.9 Mavericks

Crash issues with elements organizer while running Apple OS 10.9 Mavericks. Crashes then ask if you want to reopen or not. Also when you are trying to manuver the page with your mouse things go crazy from a full page edit back to viewing all photos on the site and skipping around from picture to picture. Unsusable as it is today!

It is very critical to delete all preferences when you do a major OS X upgrade. You need to go to your username>library>preferences and delete everything pertaining to PSE. To see that library in 10.9, open a finder window, click your user account in the list on the left (the little house with your name), and then click the gear wheel at the top of the window and choose View Options. At the bottom of the list of checkboxes you'll see Library. Turn it on and then you can easily find the preferences folder.

Transfer Rules Deleted while recreating Source System

Hi:
We connected our QBW system to upgraded SAP ECC 6.0 QAT system. We needed to recreate the source system for ECC since that appeared inactive. After our Basis admin re-created the source system, all transfer rules were deleted. Now we can not extract data. We had done the same thing in BWD when the SAP Dev system was upgraded 3 weeks ago and we did not have this problem. Is it possible to activate all transfer rules in QAT again? Or do we have to restore a backup? Or do we have to collect them again from the Development and transport to QBW??
Thanks

Hi Sunil,
yes when you delet the source system and recreate it evey thing will be vanished
right click on the souce system click Replicate datasouce
Then try with
a) Right click on source system and click on Restore if it doesn't work
b) Transport from Development to Quality
and active all the transfer rules using the report RS_TRANSTRU_ACTIVATE_ALL
hope this information helps you
thanks
kishore

Error while activating source system

Dear friends,
I am getting Error ' Basic type does not exit' while activating source system in RSA1.
please give the solution .
Regards,
D.prabhu

Hello,
this is due to incomplete partner profiles;
When createing your source system you have to ensure that your source system is open for modifications (transaction SCC4) and that you have administrative rights in this system. Indeed the creation of a source system will create all partners profiles in both systems thus the source system needs to be open for modification.
ensure this and "restore" your source system from RSA1
hope this helps...
Olivier.

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

Authorization for user in ECC while creating source system in RSA1 in BW

Hello All..
We are trying to create source system from BW(7.0) system using transaction code rsa1 to R/3 Production server.
After providing details in RSA1->Source system ; Remote logon screen of Production server pops up ...and ask to login thru admistrator Id..
To achieve the above task,, what authorization user should have in R/3 system..
Thanks

Hi,
Hope you are using the RFCUSER with these profile SAP_ALL , SAP_NEW , S_BI-WX_RFC in SAP ECC. Please create the RFCUSER with above profiles in ECC and BW (SAP_ALL , SAP_NEW and S_BI-WHM_RFC).
Pls follow the below steps for source system connection
In ECC side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system in ECC
3.) Assign a logical system in ECC
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WX_RFC
In SAP BI Side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system
3.) Assign a logical system
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WHM_RFC)
5.) Define RFC user as default (Click RSA1> Global Settings/Customizing dialog box> Glob. Settings)
Connection of SAP BI with ECC
RSA1> Source System>SAP>create>Enter the below entries
Target computer (server) Server of the SAP ECC
System ID System ID of the SAP ECC
System number System number of the SAP ECC
Background user in source system RFCUSER
Password for source system Password
Background user in BW RFCUSER (can not be changed in this activity)
Password for BW user Password
Select unicode in RFC destination and don't select the checkbox in logic screen.
On the dialog box Please log on as an basis administrator in the following screen choose Continue.
Log on to the Source System with your administrator user. Choose the correct client.
On the Replicate Metadata dialog box, choose Only Activate.
Make sure ECC client will allow changes in cross customizing client. It is one time activity once success then deselect the entry.
Hope this will help you to connect the system.
Rgs,
Ambuj Kathuria

I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!! No help link or anything!!?

I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!!

I don't know if you are still having the issue but if you are have you contacted your ISP? It sounds to me like it's more of a connectivity issue than a browser problem. I've dealt with similar things several times and in both cases it was something with the modem or an ISP setting.
I'm also wondering if it could be a Wi-Fi issue. Can you log in to your router? (It varies by brand but you would go to a site such as http://192.168.10.1. That is for Trendnet. The information for yours should be in the documentation that came with it.)
You should be able to get the router log in page to come up even if you can't connect to any websites. (Provided the network is set up correctly.)
I also would double check your connection settings (if you're connecting over Wi-Fi) or your ethernet connection. (If you're connected directly to the modem and router.)
Hopefully one of these suggestions will be helpful.

How to deal with time zone while upgrading the database?

Hi,
How to deal with time zone while upgrading the database?
Thanks
Edited by: user12135020 on Jul 4, 2011 3:06 AM

Hello,
I answered to a Wrong post.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Jul 4, 2011 12:15 PM

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. How can I retrieve my photos without buying iPhoto?

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.

I fail to remember if the installer gave me an option to keep my applications.
The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
Does your iPhoto icon in the Applications folder look like this?
Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site http://support.apple.com/kb/DL1650.
But if you have 8.x.x, you need to buy an upgrade.
Regards
Léonie

... upgrade Discovery system from V2 to V3 possible ??

Hi
Is it possible and feasible to upgrade Discovery System from V2 to V3?
If possible, is there any additional license or costs involved with the upgrade?
Cheers

Hi,
Since the Discovery system is an appliance - bundled hardware + software + content, it is not possible to upgrade from v2 to v3.0.
You are free to upgrade your v2.0 system's SAP components by downloading patches and service packs from the SAP Service MarketPlace and applying them to the V2 system if your main intention is to patch the V2 to a higher software release.
The only way to get the Discovery system V3 is to purchase it from one of the vendors and would include hardware , software and content.
Please check the SDN pages for how to order a new system:
http://www.sdn.sap.com/irj/sdn/discoverysystem
Take a look at this [blog|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0712810550DB00622245933431315245End?blog=/pub/wlg/7914] that includes a detailed list on the differences between the Discovery system V2 and V3
thanks,
Deepa

How to design EDW for source systems from different Time-Zones

How to design EDW for source systems from different Time-Zones?
Suppose IT landscape has a global BW in New York, and source systems in americas, europe and asia, then how the time-zones effect on time related things like delta selections on date or timestamp etc.

As you said BW is global in NY, your source system must be global too. People from various locations can connect to same source system and thus timestamps for delta is always maintained as 1 single time. We have same scenario in our project. Our R/3 system is used by users in US and Europe. So we run deltas twice in day to make sure we got deltas from both locations.
If scenarios was such that all locations connect to separate R/3 system, then obviously you have multiple queues. That is unique delta queue for each source system so deltas will be pulled as per data in respective queues.
Abhijit

How to Delete a Source System from BW System

Dear All,
I have a request to delete a UDC based source system from a BW system. Can you please let me know the steps to be followed to delete a UDC source system.
It would be helpful if you provide steps to delete a SAP Source system also from a BW system.
If there are any such documents for both the cases, please provide me the link.
Thanks to all.
Regards,
Karthik
Please search the forum before posting a thread
Edited by: Pravender on Mar 11, 2011 6:19 PM

Hi,
      Go to RSA1 T-code
      Click on source System on Left window
      select the Source System
      right click on it and Delete.
      click yes if you want to delete the PSA table as well
Best Regards
Obaid

Issues with BW conn. while upgrading source system from R/3 4.6 to ECC 6.0

Similar Messages

Maybe you are looking for