Issues with classpath/no driver found

Hello. Currently i am running an application which is running perfectly fine within my IDE which is websphere, and after i export the jar for the app and presume to run it, the application works, however i keep getting a ' java.sql.SQLException: No suitable driver ' error. Here what my target command looks like right now... i am including db2java.zip and the current driver i am trying to register is ''COM.ibm.db2.jdbc.app.DB2Driver", however i keep getting this error. Not in my ide... but when i export the jar and run it as follows...
C:\WINDOWS\system32\java.exe -Xms512m -Xmx512m -cp AnalysisTool.jar;gnujaxp.jar;jcommon-0.9.1.jar;mssqlserver.jar;msutil.jar;msbase.jar;jfreechart_hw.jar;log4j-1.2.7.jar;db2java.zip;sqlj.zip ca.powerpay.utility.AccessLogAnalysis.AnalysisTool
The program runs fine, with the exception of this no suitable driver error? What is going on?

Ok, get this.
I have a folder with a pair of application. One called Chartz which generates a bunch of reports. Another called Analysis tool, which allows testing and blah blah blah.
Now, they both are using the exact same class to get a connection(class CreateConnection, method getConnection) which returns a connection to the caller. They are both also using DB2.
I run Chartz with
C:\WINDOWS\system32\java.exe -Xms512m -Xmx512m -cp chartz.jar;gnujaxp.jar;jcommon-0.9.1.jar;mssqlserver.jar;msutil.jar;msbase.jar;log4j-1.2.7.jar;db2java.zip;mysql-connector-java-3.1.10.zip;sqlj.zip ca.powerpay.utility.chart.ChartzDriver
and this works fine. In fact, its been running fine for years.
I run AnalysisTool with
C:\WINDOWS\system32\java.exe -Xms512m -Xmx512m -cp AnalysisTool.jar;gnujaxp.jar;jcommon-0.9.1.jar;mssqlserver.jar;msutil.jar;msbase.jar;log4j-1.2.7.jar;db2java.zip;mysql-connector-java-3.1.10.zip;sqlj.zip ca.powerpay.utility.AccessLogAnalysis.AnalysisTool
and this says, no suitable driver error.
How does that work???? All needed jars along with the 2 apps are in this folder. They both use the exact same class and information(driver, url, username, password) to connect to DB2. However, Chartz can find the COM.ibm.db2.jdbc.app.DB2Driver driver, and AnalysisTool cannot. How does that work?????????

Similar Messages

Issues with External Hard Drives

I hope this is the right forum for this one - please give me a steer if not! I've also posted it in 'Dock and Finder', but this forum seems equally appropriate, if not more so.
I'm getting repeated issues with External Hard Drives, including ones that I have been using successfully for months/years, suddenly failing to mount and then becoming 'unknown device' through the firewire branch of 'About This Mac'.
I've just bought a new hard drive on the grounds that the others had somehow failed, and the same problems are emerging. I decided to Repair Permissions on my iMac's internal drive, and am copying the results below, from repair runs conducted yesterday and today:
YESTERDAY'S REPAIR PERMISSIONS RESULTS
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Permissions differ on "Library/Preferences", should be drwxrwxr-x , they are drwxrwxrwx .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Warning: SUID file "bin/rcp" has been modified and will not be repaired.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
Permissions repair complete
TODAY'S PERMISSIONS REPAIR RESULTS
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Warning: SUID file "bin/rcp" has been modified and will not be repaired.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
Permissions repair complete
My concerns are:
* Some of the permissions repaired yesterday appear to have needed to be repaired again today
* There are several files which carry a warning that they won't be repaired as they have been 'modified', and some of these clearly relate to disk management.
Does anyone have any ideas what is going on???
Thanks!!

Many problems with the 10.5.7 update have been fixed by a Restart.
If that doesn't help, something may have gone wrong with the update. Download and install the "combo" update, from: http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
If that doesn't help, try running the Apple Hardware Test, on the disc that came with your computer.
1. Disconnect all external devices (including the Ethernet cable) except the keyboard and mouse.
2. Insert the "Additional Software & Apple Hardware Test" disc that came with your computer.
3. Restart while holding down the "C" key. When the list of available startup volumes appears, click Apple Hardware Test and the right arrow.
4. When the Apple Hardware Test main screen comes up (after a moment), follow the on screen instructions.
5. If it detects a problem, an error code will be displayed. Make a note of it.

Issues with multiple hard drives (no luck searching)

Hi!
I've bought a 5th gen. Airport Extreme, and I have some issues with connecting multiple drives to it.
We've got multiple Macs in the house, and they have all been backed up on separate external hard drives.
One of these drives has been split into two partitions, one for backup and one for data. They are both formatted as GUID HFS+.
I've bought a powered USB-hub, and tried connecting the drives, but it doesn't work.
I get the following results:
- The AEBS only sees one of the drives.
- The AEBS sees neither of the drives.
- Everything seems to work, until I try using Time Machine on one of the drives, and everything stops working.
I've tried unplugging the AEBS, but I get nothing else than these issues.
This is my setup:
The AEBS:
The hub with the drives:
The hub:
I've tried searching numerous sites, but I haven't found an answer.
Some people have had luck downgrading to a previous firmware, but I can't for some reason.
Have any of you got some ideas how to fix it? I think I've tried almost everything.

The drives have been password protected.
I tried adding user accounts for access, but the password setting seemed to work better.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Known issues with the Super Drive on an iMac 2.7 Ghz

Are there any known issues with the Super Drive on an iMac 2.7 that would result in speed issues and a grinding sound?

Vertically installed super slim DVD drives are not as reliable as a plain desktop burner. I've had one fail in two of three iMacs and have always had an external which I use most of the time. Other than that, the brand new iMacs do not have a Super Drive, so if that is what you are inquiring about, the point is moot. You need to buy an external anyway. As far as speed, I have never used a burner at high speed - unless you have a professional model, you can easily get burn errors when burning at a fast speed; sometimes consumer models do well burning with high speeds , other times not.

FSCK and reboot issues with external USB drive

I'm having an issue with an external USB hard drive I'm using. I've always had issues with this drive cause my reboot to "freeze" when it's mounted. Basically the system message with be sent out, but it doesn't actually proceed with the reboot. No switch to init 6 or anything, but the shutdown process is still active. I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand. So I just got around this by unmounting the drive before I shutdown. However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser.
Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing. I tried running fsck on the drive, but didn't get much farther. I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't. Even with a kill -9.
I'm really confused as to what is going on. Has anyone else had this problem? Anyone have any ideas what could be causing all this or what I can do to stop this? Thanks in advance!
David
[email protected]

Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

App-V 5 SP2 install issue with Intel NIC Driver 11.16.96.0

When deploying App-V 5 SP2 using SCCM 2007 it will install with no problem on the machine. However, when the user reboots after the install the machine will blue screen. The user then reboots again and machine comes up to the desktop. However,
the App-V service is not running and is still set to automatic.
Looking at the Blue Screen dmp file the common theme looks to be a conflict with an Intel NIC driver version 11.16.96.0. Machines running an older version of the driver do not experience the issue with the blue screen after reboot and the App-V service
starts with no issues.
Has anyone seen this issue before?

Version 19 appears to be the latest: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18713&lang=eng&ProdId=3025
Have you tested with this version instead?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Issues with external hard drive enclosure

I've been having these issues with my external hard drive since I got it, it seems to be the enclosure
These issues sometimes occur if the hard drive is off but plugged in
-boot will stall after post, before grub
-usb mouse won't work unless I unplug it and plug it back in
-dmesg gives errors about failure to enumerate device
-stalling at other points during boot (continues as soon as I unplug enclosure)
And today, both windows and linux stopped detecting it properly
dmesg said something about a read error.
Then it started working again as suddenly as it started, when I unplugged it and plugged it back in.
Does this sound like a deffective enclosure?

R00KIE wrote:
I'd say bad power supply (if it has an external power supply).
Two external enclosures have done that to me already (but one is almost certain to do it while the other just started to do it recently), if the HD I have in the enclosure is a bit older (and noisier) I can even hear the HD spin down a little and spin up again, of course that whatever I was doing explodes in the process.
Mind you that the HD is confirmed to be working properly by connecting it inside a desktop pc.
I have couple other power adapters I can try. I got the same enclosure for my dad. I have a brick for a LaCie drive too. (I bought the lacie drive a year ago, but the power supply buzzed loudly. I put in a support request, but ended up returning the drive, and they sent me a new power after that)

Having issues with Mounting older drive/time machine

Hey folks, I'm having issues with mounting a ex hard drive. It works, but there is a passcode for it, due to being my time machine drive, I dont remember the password, is there anything I can do to reset it? if not how do I wipe it clean? I went into disk disk Utilities and everythink looks fine.. Check out the pics Iput up

I dont remember the password, is there anything I can do to reset it?
No.
if not how do I wipe it clean?
If you can connect the drive to a computer running Windows or a version of OS X older than 10.7, erase the drive that way. Otherwise see the link below.
Hard disk bricked after using file vault with time machine

Image Ultra Builder 3.x issue with T61 Network Driver load

Hello,
I am having issues with a Network deployment of an image on a T61 (7659-12U) During the intial boot up phase with the Network Boot disk that was created from IUB, I receive and error 1231 - The Network Location cannot be reached.. I am currently using IUB for deployment of A31, T40/42 as well as the T60 model line. None of these loads are having the problem.
Any help on this would be very much appreciated.
Thank-you in advance.
Ed

Hi,
IUB 4.01 is using WINPE 2.0<Vista based> and IUB 3.1 was using WINPE 1.0/1.1<XP Based>.
This has nothing to do with the actual image deployment. It's just that the WINPE looks more like
Vista. And this is why the method changed after you updated from 3.0/3.1 to 4.00/4.01.
To answer your questions from before:
1) Does updating IUB to version 4.01 still allow me to deploy Windows XP ?
Yes, it's still supported and possible.
2) Where on the boot CD should the new driver files be located. I took this to be PREBOOT\DRIVERS ?
As the new IUB is using WINPE 2.0, the best location for the NIC drivers is the file :
tvtos\winpe.wim
However, this is my advice.!
For my Image deployment I'm no longer using the CD for network deployment. I'm using USB key which gives me more options for the image deployment and the automatization of the deployment process.
However, if you want to use CD for network deployment, then you can do it in following way.
!!!NOTE: this is not the offical way, nor the supported way, but trust me, that it's working like charm !!!
- go to your repository location %repositorylocation%\modules
- find the file called "Z633003A.TVT" and open it using your fav zip application
- after you open this file, go to following location: tvtos\
- extract the "winpe.wim" and using WAIK unmount this file and add the NIC drivers into this .wim file
- after all the drivers are in the winpe.wim file, just copy it back to the "Z633003A.TVT" file and create a new Deployment CD
How to add NIC driver using WAIK:
This is prety easy step, but for more info, check following link:
http://www.svrops.com/svrops/articles/winvistape2.htm
As I described earlier, I'm using USB key for Network image deployment, so I have not done it this way, but I have done it a bit simplier.
Here are my steps:
- created a Distribution USB key <suing the same method, that you are using when you create a Network deployment CD, but instead of a CD I select my USB key>
- once the USB key was created successfully I unmount the "tvtos\winpe.wim" file and add all the NIC dirvers into it
This is all that I have done.
Yes, of course there are couple other steps, that I do, like modifying the BCD file, adding other WINPE files, diagnostics and other deployment tools, however, this is not realy a part of IUB, I'm using it for my WDS server and other deployment tools, that I need to use. If you know, what I mean, then you surely understand, that it's a live safer to have everything on one USB key, then on multiple CD where I need to search throught all of then to find the correct CD.
Let me know, whether this method is more suitable for you.
As described above, this is not the realy official/supported way, but it's working for sure.
Rgrds

[SOLVED] Having Issues with the Nouveau Driver and ACPI

Hello,
Trying to set up an old laptop I have with Arch and I'm having issues getting X up and running. My graphics chip is:
01:00.0 VGA compatable controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2)
I've installed xf86-video-nouveau and get the following error when starting X:
(EE) [drm] failed to open device
(EE) No devices detected.
From what I understand, I need the nouveau-drm package installed, which no longer exists in the repos. The nouveau-drm-lts package gives dependency errors:
warning: cannot resolve "kernel26-lts>=2.6.32", a dependency of "nouveau-drm-lts"
warning: cannot resolve "kernel26-lts<2.6.33", a dependency of "nouveau-drm-lts"
Seems this is because those packages are no longer named "kernel" but "linux" instead.
I've also tried using the proprietary nvidia driver, but I need the legacy 93xx driver, which the nvidia page in the Arch Wiki states it does not support Xorg 1.11.
Last edited by Pres (2012-02-05 03:31:14)

Went ahead and installed nouveau back to get an Xorg log. Here it is (though I'm getting a new error now):
[ 51.572]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 51.573] X Protocol Version 11, Revision 0
[ 51.573] Build Operating System: Linux 3.2.2-1-ARCH i686
[ 51.573] Current Operating System: Linux Arch-2650 3.2.2-1-ARCH #1 SMP PREEMPT Thu Jan 26 08:28:27 UTC 2012 i686
[ 51.574] Kernel command line: root=/dev/disk/by-uuid/1e766bce-dde5-4a31-9549-36b82bcd1157 acpi=off ro
[ 51.574] Build Date: 29 January 2012 03:41:53PM
[ 51.574]
[ 51.574] Current version of pixman: 0.24.2
[ 51.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 51.575] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 51.576] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 1 17:38:43 2012
[ 51.634] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 51.675] (==) No Layout section. Using the first Screen section.
[ 51.675] (==) No screen section available. Using defaults.
[ 51.675] (**) |-->Screen "Default Screen Section" (0)
[ 51.675] (**) | |-->Monitor "<default monitor>"
[ 51.696] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 51.696] (**) | |-->Device "nouveau"
[ 51.696] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 51.696] (==) Automatically adding devices
[ 51.696] (==) Automatically enabling devices
[ 51.757] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 51.757] Entry deleted from font path.
[ 51.757] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 51.757] Entry deleted from font path.
[ 51.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 51.757] Entry deleted from font path.
[ 51.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 51.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 51.757] Entry deleted from font path.
[ 51.757] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 51.757] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 51.757] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 51.757] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 51.768] (II) Loader magic: 0x8228580
[ 51.769] (II) Module ABI versions:
[ 51.769] X.Org ANSI C Emulation: 0.4
[ 51.769] X.Org Video Driver: 11.0
[ 51.769] X.Org XInput driver : 13.0
[ 51.769] X.Org Server Extension : 6.0
[ 51.770] (--) PCI:*(0:1:0:0) 10de:0112:1028:00f3 rev 178, Mem @ 0xe0000000/16777216, 0xf0000000/134217728, BIOS @ 0x????????/65536
[ 51.770] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 51.770] (II) Open APM successful
[ 51.770] (II) LoadModule: "extmod"
[ 51.797] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 51.809] (II) Module extmod: vendor="X.Org Foundation"
[ 51.809] compiled for 1.11.4, module version = 1.0.0
[ 51.809] Module class: X.Org Server Extension
[ 51.809] ABI class: X.Org Server Extension, version 6.0
[ 51.809] (II) Loading extension MIT-SCREEN-SAVER
[ 51.809] (II) Loading extension XFree86-VidModeExtension
[ 51.809] (II) Loading extension XFree86-DGA
[ 51.809] (II) Loading extension DPMS
[ 51.809] (II) Loading extension XVideo
[ 51.809] (II) Loading extension XVideo-MotionCompensation
[ 51.809] (II) Loading extension X-Resource
[ 51.809] (II) LoadModule: "dbe"
[ 51.810] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 51.815] (II) Module dbe: vendor="X.Org Foundation"
[ 51.815] compiled for 1.11.4, module version = 1.0.0
[ 51.815] Module class: X.Org Server Extension
[ 51.815] ABI class: X.Org Server Extension, version 6.0
[ 51.815] (II) Loading extension DOUBLE-BUFFER
[ 51.815] (II) LoadModule: "glx"
[ 51.815] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 51.844] (II) Module glx: vendor="X.Org Foundation"
[ 51.844] compiled for 1.11.4, module version = 1.0.0
[ 51.844] ABI class: X.Org Server Extension, version 6.0
[ 51.845] (==) AIGLX enabled
[ 51.845] (II) Loading extension GLX
[ 51.845] (II) LoadModule: "record"
[ 51.845] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 51.846] (II) Module record: vendor="X.Org Foundation"
[ 51.846] compiled for 1.11.4, module version = 1.13.0
[ 51.846] Module class: X.Org Server Extension
[ 51.846] ABI class: X.Org Server Extension, version 6.0
[ 51.846] (II) Loading extension RECORD
[ 51.846] (II) LoadModule: "dri"
[ 51.847] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 51.857] (II) Module dri: vendor="X.Org Foundation"
[ 51.857] compiled for 1.11.4, module version = 1.0.0
[ 51.857] ABI class: X.Org Server Extension, version 6.0
[ 51.857] (II) Loading extension XFree86-DRI
[ 51.857] (II) LoadModule: "dri2"
[ 51.857] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 51.858] (II) Module dri2: vendor="X.Org Foundation"
[ 51.858] compiled for 1.11.4, module version = 1.2.0
[ 51.858] ABI class: X.Org Server Extension, version 6.0
[ 51.858] (II) Loading extension DRI2
[ 51.858] (II) LoadModule: "nouveau"
[ 51.859] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 51.875] (II) Module nouveau: vendor="X.Org Foundation"
[ 51.875] compiled for 1.11.3, module version = 0.0.16
[ 51.875] Module class: X.Org Video Driver
[ 51.875] ABI class: X.Org Video Driver, version 11.0
[ 51.875] (II) NOUVEAU driver
[ 51.875] (II) NOUVEAU driver for NVIDIA chipset families :
[ 51.875] RIVA TNT (NV04)
[ 51.875] RIVA TNT2 (NV05)
[ 51.875] GeForce 256 (NV10)
[ 51.875] GeForce 2 (NV11, NV15)
[ 51.875] GeForce 4MX (NV17, NV18)
[ 51.875] GeForce 3 (NV20)
[ 51.876] GeForce 4Ti (NV25, NV28)
[ 51.876] GeForce FX (NV3x)
[ 51.876] GeForce 6 (NV4x)
[ 51.876] GeForce 7 (G7x)
[ 51.876] GeForce 8 (G8x)
[ 51.876] GeForce GTX 200 (NVA0)
[ 51.876] GeForce GTX 400 (NVC0)
[ 51.876] (--) using VT number 7
[ 51.901] drmOpenDevice: node name is /dev/dri/card0
[ 52.076] [drm] failed to load kernel module "nouveau"
[ 52.076] (EE) [drm] failed to open device
[ 52.076] (EE) No devices detected.
[ 52.076]
Fatal server error:
[ 52.076] no screens found
[ 52.076]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 52.076] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 52.076]
Seems the important line here is:
[ 52.076] [drm] failed to load kernel module "nouveau"
"modprobe nouveau" gives:
ERROR: could not insert 'wmi': No such device
Don't remember getting that error before. Nouveau would load fine.

Issue with any printer driver on 2008 R2

I have this issue, which is rather strange.
It all started when suddenly a few computers on our domain couldn't see printers in the catalogue on our old win 2003 print server when they did a search, that issue stopped by it self, but none the less, it was there. Then a few weeks later, when any
given end user wanted to add any given printer via the catalogue search it wouldn't install the driver we've provided and that had worked for so long before that, and when the installer would do is to start looking on Windows update for the driver to use,
but it would fail.
Due to that we have a Windows 2008 R2 server enviroment on our domain I took this oppertunity to upgrade the print server and manually (for a temporarly use only) add the printers via their IP add. for te users that need to print daily, which
has been no problem at all with installing/getting to print/Work.
Now the really strange thing is that now that I have added the new domain print server 2008 R2 this issue withstands!? I can clearly see the list of printers in the catalogue that I made, but I still get the issue where the installation tries to get the
driver via Windows Update.
On the Network we use Xerox 7665 with a PCL rev 2.0 driver, HP 2015n, HP 2020, 2025n printer that use Universial PCL 5.2 driver (tried with 6.0 as well, same issue). HP 4700 that has its correct driver as well.
Can anyone here tell me where the issue might be at? Remember this big issue is that it cannot install any given printer on any given end user and it always tries to get the driver from Windows Update.
Also, end users have Windows 7 x86 and x64 versions installed. No XP, No Windows 8.
I hope someone here can help me, because my Google search gives me nothing... And normally Google and I are so good friends resolving issues ><

Seems like a common issue please try this. Please take a registry backup first.
This
is a very common error found in environments that use Windows 2003 32bit print servers , HP printers and 64Bit clients .
This problem may occur because of the following factors :
1 ) The dll Print Processor configured for your printer is not in the Client or Server drivers folder 2
) The Print Processor that the printer uses only installed the 32bit files and does not install the 64Bit version
Resolution:
Microsoft
has released a fix to try to solve this problem (
http://support.microsoft.com/kb/982728/pt-br ) , however even with this
fix applied already came across the problem then to solve just follow the steps below :
On the print server , open regedit and navigate to the folder ;

Permission issues with new hard drive

Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
Suggestions???

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Issue with Blue tooth driver for Windows 10

The blue tooth device does not work on Win 10. 1. The laptop can pair with my Android phone... but I cannot upload photos from the Android phone 2. The message on my phone says connection failed. 3. Tested that Laptop (Prod #: E0M31UA#ABL) can send file to the phone though. 4. See below screen shot for driver details to the laptop.

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have looked into the issue you are having with Bluetooth and came across some documents that may help you resolve the Bluetooth issue. The first document I found is called Using Bluetooth Devices. This document may be helpful because it walks you through connecting devices. The second document I found is called Understanding and troubleshooting Bluetooth wireless technology. This document has other helpful information about drivers, making sure everything is bluetooth enabled, fixing bluetooth problems, etc. Have you tried to update the driver that is currently installed? Have you tried doing the updates in Safe Mode?Have you tried in the Device Manager to uninstall the driver that is currently installed? You could try to uninstall the driver you currently have, restart the Notebook and then reinstall the newer driver either from the HP ENVY 15-j084ca Notebook PC Driver's Page (although there is not a driver specified in the Windows 10 column, there is a Windows 8.1 Version of the Driver put out on July 31st, that should work) or you could use the HP Support Assistant. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. Here is a link from Microsoft called Connect to Bluetooth Devices. Please follow the troubleshooting provided and re-post with the results. Have a great day!

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

Issues with classpath/no driver found

Similar Messages

Maybe you are looking for