Issues with configuring lookback adapter on vista

Hey people,
I installed the lookback adapter for a PC running vista business, and connected to my broadband router. The instructions on this site indicate that I should add a line to the: C:\Windows\system32\drivers\etc\hosts file.
Now I opened this file with notepad, added the new ip address, host and domain names, but the it wont let me save this extra information.
When i try saving, it says: cannot create the c:\windows .... etc\hosts file. ... make surethat the path and file name are correct.
I installed the Oracle 10g anyway, it didint show any warnings, but of course I cant connect to the enterprise manager, but most other products seem to be working.
please help ....

Hi there,
well just like you said, I couldnt connect to em after disconnecting the computer. I now tried the reconfigurations you suggested, but it apparently was not successful. Below are the steps and reports, please help ......
C:\>emca -deconfig dbcontrol db
STARTED EMCA at 06-Aug-2007 21:36:04
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: orcl
Do you wish to continue? [yes(Y)/no(N)]: y
06-Aug-2007 21:36:21 oracle.sysman.emcp.util.EMCALogManager addLogFileInternal
WARNING: Adding log file C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2007-08-06_09-36-21-PM.log failed. Messages will not be logged in this file.
06-Aug-2007 21:36:21 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2007-08-06_09-36-21-PM.log.
06-Aug-2007 21:36:23 oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be p
erformed.
Enterprise Manager configuration completed successfully
FINISHED EMCA at 06-Aug-2007 21:36:23
C:\>emca -repos drop
STARTED EMCA at 06-Aug-2007 21:37:22
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: orcl
Listener port number: 10.10.10.10.
Invalid port.
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
06-Aug-2007 22:02:31 oracle.sysman.emcp.util.EMCALogManager addLogFileInternal
WARNING: Adding log file C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2007-08-06_10-02-31-PM.log failed. Messages will not be logged in this file.
06-Aug-2007 22:02:31 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2007-08-06_10-02-31-PM.log.
06-Aug-2007 22:02:34 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
06-Aug-2007 22:02:35 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Enterprise Manager configuration completed successfully
FINISHED EMCA at 06-Aug-2007 22:02:35
C:\>emca -repos create
STARTED EMCA at 06-Aug-2007 22:03:06
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: orcl
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
06-Aug-2007 22:03:28 oracle.sysman.emcp.util.EMCALogManager addLogFileInternal
WARNING: Adding log file C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2007-08-06_10-03-28-PM.log failed. Messages will not be logged in this file.
06-Aug-2007 22:03:28 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2007-08-06_10-03-28-PM.log.
06-Aug-2007 22:03:31 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
06-Aug-2007 22:03:31 oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
06-Aug-2007 22:03:31 oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
06-Aug-2007 22:03:31 oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2007-08-06_10-03-28-PM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2007-08-06_10-03-28-PM.log for more deta
ils.
C:\>emca -config dbcontrol db
STARTED EMCA at 06-Aug-2007 22:08:21
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: orcl
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Invalid username/password.
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ C:\oracle\product\10.2.0\db_1
Database hostname ................ nwokedi-pc.practice.com
Listener port number ................ 1521
Database SID ................ orcl
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: y
06-Aug-2007 22:09:32 oracle.sysman.emcp.util.EMCALogManager addLogFileInternal
WARNING: Adding log file C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2007-08-06_10-09-32-PM.log failed. Messages will not be logged in this file.
06-Aug-2007 22:09:32 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2007-08-06_10-09-32-PM.log.
06-Aug-2007 22:09:39 oracle.sysman.emcp.util.FileUtil backupFile
WARNING: Could not backup file C:\oracle\product\10.2.0\db_1\sysman\config\emd.p
roperties
06-Aug-2007 22:09:39 oracle.sysman.emcp.util.FileUtil backupFile
WARNING: Could not backup file C:\oracle\product\10.2.0\db_1\sysman\config\emoms
.properties.emca
06-Aug-2007 22:09:39 oracle.sysman.emcp.util.FileUtil backupFile
WARNING: Could not backup file C:\oracle\product\10.2.0\db_1\sysman\emd\targets.
xml
06-Aug-2007 22:09:46 oracle.sysman.emcp.EMConfig perform
SEVERE: Error updating C:\oracle\product\10.2.0\db_1\sysman\config\emoms.propert
ies
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2007-08-06_10-09-32-PM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2007-08-06_10-09-32-PM.log for more deta
ils.
C:\>

Similar Messages

Issue with Receiver SOAP adapter for synchronous scenario

Hello All,
We are facing a strange issue with the SOAP adapter in the interface we have setup. This is the 1st time we are using SOAP adapter in our system (PI 7.11 SP7). We are making a synchronous HTTP call to the web service exposed by another system in our landscape. The payload is send with SOAP envelope and there are no credentials to be maintained in PI settings.
The issue is that we are always getting timeout exception in PI audit logs after sending the request (3 minutes - standard timeout value, no additional config for this). But target system has confirmed that they are sending the response back. We tested from our server OS level and have received the response back in the same screen (to verify there is no firewall/port issue in between the systems). But when tried from RWB, it is always giving the timeout exception and we are not able to see any other log.
We have tried checking in the NWA logs as well after increasing the logging level to ALL for com.sap.aii.adapter.soap. But surprisingly, we didn't get any logs at all for the outgoing SOAP call or incoming response and hence we are unable to trace the issue.
We have setup another synchronous inbound SOAP interface (PI exposing the webservice) and it is working fine. We are also able to trace the logs in both audit log and NWA logs.
Is there anywhere else we can check for the logs? Audit logs is showing timeout error and we are not able to see anything in NWA logs.
Does the target system need to maintain PI credentials in the header when they send the synchronous response back?
Are there any specific settings which should be checked to enable the sync communication? (this should not be the case since the inbound interface is working fine)
Please help.
Thanks
Justin

Hi Amit,
Thanks for the reply.
Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
Thanks
Justin

Issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005

Hello Experts,
One of my customer has an issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005.
"We are trying to configure the SQL server 2005 database with Hyperion hub and we are unable to get the cofiguration completed. We suspect the driver class (hyperion.jdbc.sqlserver.SQLServerDriver) used in the domain.xml (path \Hyperion\HyperionHub\7.2.1\deployments\Tomcat\4.1.30\) is not helping to connect with sql server 2005. We would appreciate if you can provide new driver class which we can included while deploying the app under the web server."
Please suggest. Thanks in advance
Regards,
Sonu

Hi
Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

Issue with JMS inbound Adapter and Asynchronous BPEL

Hi Gurus,
I am facing the below issue with JMS inbound Adapter and Asynchronous BPEL .
I have 2 JMS Queues one inbound and one outbound . The Composite has multiple BPEL Components around 4 on an average and i have 4 composites similar to that .
Totally 4 Composites * 4 BPEL Components = 16 Services
Propoesd Solution :
I have used MessageSelector in the JMS Adapter for selecting the incoming message. The BPEL gets invoked if the message selector is true and proceses the Message and writes the response to the other Queue.
Initially i had no problems but intermittantly the BPEL processes are getting invoked but they are not processing the data ( Bpel process is supposed to invoke an external service and get the response in a sync call) and each BPEL processe instance is in running state for ever . This remains even if i restart the servers .
The message gets read by the JMS Adapter , BPEL instace gets created but it wont proceed futher and remains in the runnign state for ever.
If i redeploy the Composite then messages get processed but the issue creeps up again ( i tried to checl the logs but ino cluea about the issue .
Getting frustrated day by day tried the bpel.config.transaction, increased the JMS Adapter threads , inreased the worker threads but all in vein..
please let me know if any one has faced similar issue .
Anticipating a quick response from the gurus.
Lakshmi.

We are also facing this issue in 11.1.1.5.
Breifly the issue is : The BPEL process which polls an inbound JMSAdater ( consume_message) either stays in running state forever ( whatever we do) or go to the recovery queue. It doesnt recover even if i try to recover it. This happens intermittently. Redeploying the application / restarting servers sometime solve the issue but as know we cant do that on prod systems .
Can some one look into this on priority and help us giving a solution/workaround.

Issues with Seeburger FTP adapter

Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
2. In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this subject...what to expect from this definition.
Thank you for all your replies,
Parimala

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

Issues with signal input adaptive filtering, it won't filter the added noise from the input waveform

Hello,
I have an issue with my adaptive noise cancellation program. Essentially I want to input a custom wav add noise to it and then filter the noise away in order to gain the custom wav again.
While doing so I want to read the learning curve and read the adaptive coefficients. Unfortunately I have an issue when it comes to the filtering of the custom wav+noise. It won't filter the signal at all.
It would be helpful if someone could have a look at it and possibly help me out.
Thanks!
Attachments:
Testing.vi ‏59 KB

Hey Jan,
Thanks for the reply. I am currently using the Adaptive Filter Toolkit in order to obtain those VIs. The VIs which are in use are the LMS Adaptive Filter ones.
I figured there might be an error with the input of the array. This VI requires a DBL Array but it seems like it can not process it.
The "Get Wavefirn Components" works better now but I still have an issue with a time. I put a 9s wav file in but it only computes it in a very short time and I can not play the file while it is computing.
I added the modified program to the attachments.
This program is ought to read a waveform file add noise to it and then use an adaptive filter in order to get the orginal waveform back again and if possible either store or play the final waveform.
Thanks for your help.
Attachments:
Testing.vi ‏62 KB

Issue with HAL essbase adapter

Hi Experts
I have an issue with HAL,I got the below error when I tried to use essbase adapter, the HAL version is 7
java.Lang.NoClassDefFoundError
I know this is known error ...most of the forums are telling this is error related to Environment Variables...but I dont know how to fix as I am unaware of this....java..... classes..bla bla bla..
I installed HAL in c drive, Can anyone help me ...how to fix this issue....
Thank You
M.S

Go to control panel->system->system properties->advance->environmental variables. You should have something like this "C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter" in your classpath variable. Check you installation on your "C:\" drive to get the correct path. Hope this helps.

Issue with Receiver MDM Adapter - Integrated Configuration

Hi Experts,
My scenario is I need to pick a file from PI Directory and push it into MDM Ready folder.
The source file structure is ~ delimiter text file and at the receiving end , I need to push the same file as it is.
At the receiving side I have used MDM Adapter.
The issue at receiving side is:
I am receiving file with .xml extension with the same content as of source file but my requirement is .txt file.
Please advise on this.
I am using SAP PI 7.31.
P.S.- I have not used FTP at the receiver side due to some other concerns.
Thanks,
Vivek Jain

Hi Amit,
Thanks for the reply.
Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
Thanks
Justin

Issue with Sender Mail Adapter Configuration

Hi All,
We are PI 7.1.1 version. We are unable to see the following parameters in the sender Mail adapter:-
Default XI Parameters : Default Interface Namespace and Default Interface Name.
Also, we are geeting a Nullpoinetr exeception in RWB.
Kindly provide your suggestions.
Thanks & Regards,
Navneeth K.

Hi.
I have faced the sane problem. My solution is to use DynamicConfigurationBean module:
AF_Modules/DynamicConfigurationBean Local Enterprise Bean
with
parameters:
message.interface=<Your Interface Name>
and
message.interfaceNamespac=<Your Interface Namespace>
Note that last parameter name is not interfaceNamespace but interfaceNamespac .
It would be great if anyone will explane were Default XI parameters gone and how we can get them back.

Issue with ide-usb adapter

Hello... I'm trying to connect the hard drive from a G4 via an ide-usb adapter to my Intel Macbook, and the Macbook can't see the drive. I've used this adapter to read Windows HDs on Windows machines without any trouble, any ideas on what issues could be my problem? According to the adapter's literature it is Mac compatible.

It's this one... http://inlandproduct.com/usb20toidesataadapterpartnumber08412.aspx
Admittedly not the most high end product, but always worked flawlessly before. I tried it with the drive configured as master, as slave, and as cable select... nothing.

Issue with Oracle Application Adapter (11g) for SAP

Hi,
I need to call a WSDL file that is generated through Oracle Application Adapter Application Explorer from a BPEL Composite in SOA 11g.
The wsdl files are stored under the path $SOA_HOME/soa/thirdparty/ApplicationAdapters/wsdls by default.
I’m not able to see the wsdls in the Resource Pallette while trying to invoke the adapter. Kindly let me know the workaround for the issue.
Regards,
CC

Hi Chandu
For SOA 11G, in order to access the BAPI WSDLs ,you need a third party adapter service which comes with Jdeveloper version 11.1.1.2.0 . I am not sure if this is available with Jdeveloper version 11.1.1.1.0. So make sure you have the correct version of Jdev for development.
Also in 11g when you generate the WSDL(outbound service) from AE, 4 files are generated.
XXXX_invoke.jca
XXXX_invoke_request.xsd
XXXX_invoke_response.xsd
XXXX_invoke.wsdl
You need to copy these 4 files to your Jdev project folder and configure the third party adapter service to invoke the SAP BAPIs. Hope this helps.
Thanks
Subhankar

Facing issues with JCA DB Adapter

Hi,
I have to create a DB Adapter in BPEL on Reporting Database of OSB.
I have a requirement to extract DATA_VALUE from WLI_QS_REPORT_DATA Table stored in BLOB datatype by passing parameters in WLI_QS_REPORT_ATTRIBUTE with a join condition of a common unique ID (MSG_GUID) in both tables.
This DB Adapter files will be imported in OSB to generate Biz Service, which will perform this function.
I have followed all steps as mentioned in this blog :
http://guidoschmutz.wordpress.com/2010/08/08/oracle-service-bus-11g-and-db-adapter-a-different-more-integrated-approach/
My query looks like this :
SELECT t0.MSG_GUID, XMLTYPE(t0.DATA_VALUE,nls_charset_id('AL32UTF8')) FROM osb_infra.WLI_QS_REPORT_DATA t0
LEFT OUTER JOIN osb_infra.WLI_QS_REPORT_ATTRIBUTE t1
ON (t0.MSG_GUID = t1.MSG_GUID)
WHERE t1.DB_TIMESTAMP >= ADD_MONTHS(SYSDATE,-1)
AND t1.DB_TIMESTAMP < SYSDATE AND
t1.INBOUND_SERVICE_NAME =#serviceName
AND (SUBSTR(t1.MSG_LABELS,22,10) =#keyValue OR SUBSTR(t1.MSG_LABELS,18,10)=#keyValue)
AND t1.STATE='REQUEST'
This query runs fine when run independently on DB. but gives no response when used in DB adapter generated Biz Service, while testing in OSB Test Console.
I have done trials for this tool by modifying query as following.
1.     Query on 1 table : Report Attribute – Success
2.     Query on 1 table : Report data – Success but no XML data
3.     Query on both tables with ServiceName Hardcoded – Failure
4.     Query on both tables with keyValue hardcoded – Failure
5.     Query on both tables with both params hardcoded – Failure
6.     Query on both tables without XML data, selecting MSG_GUID only - Failure
All the above queries give desired outputs with XML message converted as well when run independently on SQL woksheet.
1.     Query on multiple tables
2.     Fetching of data in XML format as response into OSB pipeline.
I am still trying hard to somehow get data from DATA Table with providing MSG_GUID as parameter, but no progress.
The query I used here is :
SELECT XMLTYPE(DATA_VALUE,nls_charset_id('AL32UTF8')).getClobVal FROM osb_infra.WLI_QS_REPORT_DATA
WHERE MSG_GUID = 'uuid:b2bf9a6e66ba73f5:-7d5e4cfc:13deecde95d:5434'
This query runs fine in SQL Worksheet of JDeveloper with no issue and also extracts XML out of BLOB data.
But no success in getting it inside OSB pipelines.
Output in OSB for dataValue is : <dataValue xsi:nil = "true"/>
Please guide on this.
Thanks
Cheena Malhotra

Are you sure your JAVA_HOME is set correctly? Usually it installs as jdk1.6.0_41 not jdk1.6.0-41. It's an underscore not a dash and there is usually no space between jdk and the version number. I'm basing this on my experience with Unix, Windows may be different.

Having issues with Microsoft ISATAP Adapter and Adapter #2, Teredo Tunneling Pseudo-Interface and PnP devices

I have gone through troubleshooting and says driver needs to be reinstalled. On the Adapter and Teredo I am getting an error code 10 cannot start. I have a disc for drivers and apps. Should I go in and uninstall them and then use the
legacy thing and then fix the problem with my disc? I have windows update to configure updates in drivers so what is going on?

I have gone through troubleshooting and says driver needs to be reinstalled. On the Adapter and Teredo I am getting an error code 10 cannot start.
Hi,
Have you tried to enable IPV6 and then check if you can start Teredo?
Locate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\TCPIP6\Parameters
Check whether the "DisabledComponents" registry key exists. If so, please double click the "DisabledComponents"
registry key and modify the value to 0.
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
http://support.microsoft.com/kb/943104/en-us
Andy Altmann
TechNet Community Support

Issue with Third Party Adapter for custom JCA Connector in Oracle 11g.

Hi,
For a proof of concept, I have created my own JCA Connector. I have deployed this connector in Weblogic and it works as expected.
Now I am trying to call the JCA Connecter from the SOA Bus. For this I have create a SCA Composite with a simple Web Service to expose the composite, a Third Party Adaptor to wrap the JCA Connector and a Mediator to wire the Web Service and the Third Party Adapter together. For the Third Party Adapter I have created both the needed *.wsdl and _3P.jca file my self. The problem is that I could not find any documentation about the _3P.jca file, and it looks like it that this file is new for 11g.
After some puzzling and debugging I am able to deploy the SCA Composite with the Third Party Adapter. Though when I test the exposed Web Service with the Enterprise Manager I get errors and a stack trace. The problem is that the Record Converter I have created receives the default XMLRecord implementation (oracle.tip.adapter.fw.record.XMLRecordImpl) and not the implementation of the XMLRecord I have created my self.
So the question is does anybody know how to configure the Third Party Adapter so that it will use my custom implemenation of the XMLRecord interface (oracle.tip.adapter.api.record.XMLRecord) instead of the default implementation of the XMLRecord (oracle.tip.adapter.fw.record.XMLRecordImpl).
I would suspect that it should be configured in the _3P.jca file, though I don't know how. The following is the content of the current _3P.jca file I am using.
<adapter-config name="DiskAdapter" adapter="Disk Adapter" wsdlLocation="JCADiskConnector.wsdl"
                xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<record-converter className="com.osc.jcaadapter.convert.DiskRecordConverter"/>
<connection-factory location="jndi/diskcf" adapterRef=""/>
<endpoint-interaction operation="Send" portType="Send_ptt">
    <use-record-converter addonNamespace="http://somecomp.com/DiskAdapter"/>
    <interaction-spec className="com.osc.jcaadapter.impl.DiskInteractionSpecImpl">
      <property name="FunctionName" value="do-it"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>So I am hoping that some one knows how you should configure the Third Party Adapter so it uses my own implementation of the XMLRecord interface.

Hi Simeon,
That is a good suggestion, and I would certainly try to do that if I was not making a proof of concept. It would solve my problem of not getting the sub class of the XMLRecord.
Though for making my proof of concept I found a 10g example that used sub classes of the XMLRecord, and that is why I wanted to get the same example to work on 11g.
The alternative of passing a parameter through with InteractionSpecs, is an interesting though can not solve this problem. I don't have a problem with the javax.resource.cci.Record, I can determine the implementation of that in the conversion class it self.
The problem is the XMLRecord generated by the Oracle SOA Adapter Framework, some how I need a way to influence that to generate the correct implementation of the XMLRecord.
So your post is certainly helpfull if I was not trying to get this specific problem to work :).
But I am afraid that I will end up in implementing your sugestion.
Regards
Maikel.
Edited by: M. Dierdorp on 13-aug-2010 6:34

Issue with Database table adapter

Hi,
Iam working on OIM 9.1.0.1
I login as an end user & self request the DB table which is configured.
User can assign & the xelsysadm approves ..
The approval task is completed as seen in the End User page. In the Task Assignment History -->Task status is Pending
Can anyone help me out on this issue.
Error seen on console.
ERROR,19 Feb 2011 16:00:01,421,[XELLERATE.ACCOUNTMANAGEMENT],Class/Method: tcUse
rOperationsBean/updateUserData encounter some problems: maoErrors:An error occur
red while retrieving process information null
ERROR,19 Feb 2011 16:00:01,437,[XELLERATE.SCHEDULER.TASK],Class/Method: tcTskUsr
Provision/checkPolicyUpdateFlags encounter some problems: An error occurred whil
e retrieving process information null
Thor.API.Exceptions.tcAPIException: An error occurred while retrieving process i
nformation null
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unk
nown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown
Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown
Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(t
cUserOperations_voj9p2_EOImpl.java:4747)
at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
at sun.reflect.GeneratedMethodAccessor320.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Sou
rce)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy51.updateUser(Unknown Source)
at com.thortech.xl.schedule.tasks.tcTskUsrProvision.checkPolicyUpdateFla
gs(Unknown Source)
at com.thortech.xl.schedule.tasks.tcTskUsrProvision.execute(Unknown Sour
ce)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionActi
on.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Sou
rce)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:477)
Running GENERICADAPTER
Target Class = com.thortech.xl.gc.runtime.GCAdapterLibrary

It's a new error now..
The Create User task is Rejected with the below error in console.
Running GENERICADAPTER
Target Class = com.thortech.xl.gc.runtime.GCAdapterLibrary
ERROR,21 Feb 2011 17:45:42,171,[XELLERATE.APIS],
java.lang.NullPointerException
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorD
efinition(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperations_do1ndy_EOImpl.lookup(GCOperati
ons_do1ndy_EOImpl.java:576)
at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Sou
rce)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy79.lookup(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unkn
own Source)
at sun.reflect.GeneratedMethodAccessor373.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMY_NEWTESTUSERS_GTC
.GENERICADAPTER(adpMY_NEWTESTUSERS_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMY_NEWTESTUSERS_GTC
.implementation(adpMY_NEWTESTUSERS_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Sour
ce)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(Unknown
Source)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(Unkno
wn Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(
Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(Unknown Sourc
e)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.autoDOBSave(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(Unknown Sour
ce)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(Unkn
own Source)
at com.thortech.xl.dataobj.tcOIU.provision(Unknown Source)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOBI.checkApproved(Unknown Source)
at com.thortech.xl.dataobj.tcOBI.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOBI.approve(Unknown Source)
at com.thortech.xl.dataobj.tcRequestObject.handleApprovalLaunch(Unknown
Source)
at com.thortech.xl.dataobj.tcREQ.launchObjectApprovals(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.checkRequestReceived(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.exec
ute(Unknown Source)
at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.exec
ute(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.proces
sMessage(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageHandlerMDB.onMessa
ge(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:46
6)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDL
istener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:
327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:505
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR,21 Feb 2011 17:45:42,250,[XELLERATE.APIS],An exception occurred while crea
ting the GenericConenctor Model from the Connector Definition file
ERROR,21 Feb 2011 17:45:42,250,[XELLERATE.APIS],An exception occurred while gene
rating Generic Connector model from the connector definition xml of the connecto
r 'MY_NEWTESTUSERS'
com.thortech.xl.gc.exception.ConnectorDefinitionOperationsException: An exceptio
n occurred while creating the GenericConenctor Model from the Connector Definiti
on file
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorD
efinition(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperations_do1ndy_EOImpl.lookup(GCOperati
ons_do1ndy_EOImpl.java:576)
at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Sou
rce)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy79.lookup(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unkn
own Source)
at sun.reflect.GeneratedMethodAccessor373.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMY_NEWTESTUSERS_GTC
.GENERICADAPTER(adpMY_NEWTESTUSERS_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMY_NEWTESTUSERS_GTC
.implementation(adpMY_NEWTESTUSERS_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Sour
ce)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(Unknown
Source)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(Unkno
wn Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(
Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(Unknown Sourc
e)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.autoDOBSave(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(Unknown Sour
ce)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(Unkn
own Source)
at com.thortech.xl.dataobj.tcOIU.provision(Unknown Source)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOBI.checkApproved(Unknown Source)
at com.thortech.xl.dataobj.tcOBI.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOBI.approve(Unknown Source)
at com.thortech.xl.dataobj.tcRequestObject.handleApprovalLaunch(Unknown
Source)
at com.thortech.xl.dataobj.tcREQ.launchObjectApprovals(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.checkRequestReceived(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.exec
ute(Unknown Source)
at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.exec
ute(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.proces
sMessage(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageHandlerMDB.onMessa
ge(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:46
6)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDL
istener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:
327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:505
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
... 76 more
ERROR,21 Feb 2011 17:45:42,312,[XELLERATE.GC.FRAMEWORKPROVISIONING],An exception
occurred while generating Generic Connector model from the connector definition
xml of the connector 'MY_NEWTESTUSERS'

Issues with configuring lookback adapter on vista

Similar Messages

Maybe you are looking for