Issues with connecting and with listening

I just got a new ipod suffle 2G. i connected it to my computer and ran the setup and it worked fine. I then loaded some music onto the pod and left it to charge. after removing it and playing it i found that the volume in the left earphone was much less than the volume in the right earphone. i tried other earphones to see if that was the problem but it wasn't (and no im not going deaf in one ear!). i then tried to reconnect it to my computer and it wouldn't connect. im utterly confused. i've got the feeling it might be something to do with the jack in the ipod. maybe a hardware issue?
would appreciate any help on this. thanks.

It might be more efficient to post in the 2G forums instead of this 1G one.

Similar Messages

APEX Listener 1.1.4 install issue with listener configuration

Oracle XE 11gR2
APEX 4.1.1
APEX Listener 1.1.4
Glassfish 3.0.1
=============
Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
Any ideas?

Hi,
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
But perhaps the error disappears as soon as you also get a proper configuration page.
-Udo

Having issues when connecting and re-connecting back to a session.

When i am log-on to the MPS2012 through the thin client and let say there was a need to re-connect because of power issue or the network issue for that particular client was disconnected; So when the user connect back to it, it bounces back and fails for
re-login, after re-logging again, it still bounce back. And other client connect to the particular VM are still connected and running.
And also in the morning, when i connect, it fails at times and when i ping that particular VM, it times out"Request time out", until i restart it before it start replying and then the client systems will now be able to connect.
Its giving me concern because they are complaining and also its a school environment. I need resolve this so that even if i am not there they will be able to connect easily and re-connect easily if there was a disconnection from any thin client.
Please i will really appreciate if anyone can assist me resolve any of this issue or what the cause/problem is.
Thanks

cmuunswcanberra wrote:
It has happened once in another project but I was able to re-type into it and it worked.
So it sounds as though it may be the project.
Try this.
Delete preference files with Preference Manager.
Delete project ender files.
Create a new project.
Copy the problem project and paste into the new project.
Test a title.
Good luck.
Russ

TCP Connection Issues with OPC Server and GE Versamax

Hi there,
I have an installation of Lookout 6.0 coupled with the OPC Inductrial Automation servers. In my application, we are running two instances of the GE Versamaz Ethernet driver to communicate with two remote (over the internet) GE Fanuc Versamax PLCS.
Every few days, the two PLCs lose connectivity. It does not appear to be a LAN connectivity issue as I can still log into the PLCs using the GE software. To fix the issue, the Lookout software must be restarted.
Has this been seen by anybody else? This poses a significant problem as lookout is used to monitor the PLCS at sewage stations - each time the connections are lost we have to deploy technicians to the sites to ensure all is working.
-andrew

Hello Andrew,
When the connection is terminated are you getting any errors or alarms? If so what are they? Also you can try to replace the object that is connected to the PLC and make sure it has the correct settings. It may also be due intermittent networking issues, losing connection and not able to connect with the object again unless Lookout is restarted again. I have not heard about any such networking issues. The attached document can be used for reference.
Regards,
RMM
http://digital.ni.com/public.nsf/websearch/5ECD2AFA039B45C186256B1300621722?OpenDocument

Oracle 10.2 issues with services and listener

Hi,
I have successfully installed ORACLE 10.2(SID= ANK) and uninstalled 10.1(SID= ANB) on same machine(Hostname INLD50057853A port 1521) .
but I am not able see listener services in windows service box for ANK I only see previous one, though I have uninstalled 10.1 with proper steps.
Below are only services I can see in my windows box
1) OracleANB101TNSListener (not able to start this service...it gives some error)
2) OracleANK102iSQL*Plus (not able to start this service also)
3) OracleOraDb10g_home1TNSListener (not able to start this also)
Could you please let me know what can I do in such case now.
If I do command lsnrctl it gives me successfull message
C:>lsnrctl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 01-JUN-2009 11:53
:10
Copyright © 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
If I do command tnsping ANK.WORLD it give me error message
C:>tnsping ANK.WORLD
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 01-JUN-2
009 11:52:03
Copyright © 1997, 2005, Oracle. All rights reserved.
Used parameter files:
c:oracleANK102
etworkadminsqlnet.ora
TNS-03505: Failed to resolve name
If I do commant sqlplus /nolog it says
C:>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jun 1 11:55:06 2009
Copyright © 1982, 2005, Oracle. All rights reserved.
SQL> conn sys/your_pass @ ank.world as sysdba
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
my lsnrctl.log says
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 01-JUN-2009 11:59:44
Copyright © 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
sending you listener.ora , namespace.ora and sqlnet.ora
C:oracleNetworkadmin
listener.ora
1. Filename......: listener.ora
2. Created.......: created by SAP AG, R/3 Rel. >= 6.10
3. Name..........:
4. Date..........:
5. @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#3 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = ANK.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = ANK)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = INLD50057853A)
(PORT = 1521)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SDU = 32768)
(SID_NAME = ANK)
(ORACLE_HOME = C:oracle)
tnsnames.ora
1. Filename......: tnsnames.ora
2. Created.......: created by SAP AG, R/3 Rel. >= 6.10
3. Name..........:
4. Date..........:
5. @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#3 $
ANK.WORLD=
(DESCRIPTION =
(SDU = 32768)
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = INLD50057853A)
(PORT = 1521)
(CONNECT_DATA =
(SID = ANK)
(GLOBAL_NAME = ANK.WORLD)
sqlnet.ora
1. Filename......: sqlnet.ora
2. Created.......: created by SAP AG, R/3 Rel. >= 6.10
3. Name..........:
4. Date..........:
5. @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#3 $
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
NAME.DEFAULT_ZONE = WORLD
SQLNET.EXPIRE_TIME = 0
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TCP.NODELAY=YES
I hope this information is enough for you to know what issue I am facing now. but if you need some more logs do let me know. Its very tricky situation and I am sure solution is very small which I dont know currently and need experts point of view
Kindly suggest.
Regards,
Ankit Baphna

will close this and open new as I am having some issue with editor

Issue JDBC connection pool with Glassfish 3.1.2.2 and Oracle XE 11gR2

Hello,
I am experiencing an issue with pinging a JDBC connection Pool.
I installed the following without any warnings or errors:
Operating System: Oracle Enterprise Linux 5
Oracle XE 11gR2 (11.2.0.2.0) database
Glassfish 3.1.2.2
I will refer to the steps I did after the installations
1) In the .profile file of the OS I add the following:
JRE_HOME=/usr/java/jre1.6.0_31; export JRE_HOME
JAVA_HOME=/usr/java/jdk1.6.0_31; export JAVA_HOME
GLASSFISH_DIR=/u01/glassfish3
GLASSFISH_HOME=/u01/glassfish3/glassfish
DERBY_HOME=$GLASSFISH_DIR/javadb
OPEN_MQ_HOME=$GLASSFISH_DIR/mq
PATH=:$JAVA_HOME/bin:$JRE_HOME/bin:$PATH:$HOME/bin:$GLASSFISH_HOME/bin:$DERBY_HOME/bin:$OPEN_MQ_HOME/bin
export GLASSFISH_HOME
export DERBY_HOME
export OPEN_MQ_HOME
export PATH
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/xe/lib; export LD_LIBRARY_PATH
. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh
2) I copied the ojdbc6.jar to the $GLASSFISH_HOME/domains/domain1/lib
3) I login to the Glassfish admin console and created a new JDBC Connection Pool.
Pool Name: ds_orasys
Resource Type: javax.sql.DataSource
Datasource Classname: oracle.jdbc.pool.OracleDataSource
User: [myschema]
Password: [myschema password]
URL: jdbc:oracle:thin:@localhost:1521:xe
When I ping the connection pool I get the following message in the server log:
[#|2012-10-23T12:14:37.069+0300|WARNING|glassfish3.1.2|javax.enterprise.resource.resourceadapter.com.sun.enterprise.connectors.service|_ThreadID=22;_ThreadName=Thread-2;|RAR8054: Exception while creating an unpooled [test] connection for pool [ ds_orasys ], Connection could not be allocated because: Invalid Oracle URL specified|#]
[#|2012-10-23T12:14:37.071+0300|SEVERE|glassfish3.1.2|org.glassfish.admingui|_ThreadID=19;_ThreadName=Thread-2;|RestResponse.getResponse() gives FAILURE. endpoint = 'http://212.205.62.217:4848/management/domain/resources/ping-connection-pool.json'; attrs = '{id=ds_orasys}'|#]
I tried to use different jar files. I used ojdbc6dms.jar and ojdbc14.jar.
I also copied the jar files in the $GLASSFISH_HOME/domains/domain1/lib/ext directory as some people suggested. Still no luck. I keep getting the same error messages in the server.log
Can anybody help me out or point me to the right direction.
Thank you in advance

The error is in the URL. It was in front of my eyes and I couldn't see the error. I skipped the ':' before the '@' when I created the pool. It is working fine now.

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

Satellite L500 and issues with wireless connection

Hello people
Ill just throw my problem out there.
First of all my details and info which may help you help me!
Satellite L500 running windows 7 (note: same issues when Vista was installed)
Latest wireless drivers as well as latest drivers for everything else.
My wireless router is a billion voip enabled router 7000 series its quite a good one for when I got it about 2 yrs ago and works fine.
Basically the problem is the wireless on my Satellite L500 keeps dropping out. Im no more than 20m away at most, right now Im 10m away with 1 wall in the way. I tried to get to a website and it says connection dropped out or unable to find host.
However the other laptops in the same room same spot at the same time has no issues at all. Never has.
As soon as I go into the same room as my router it works again. Sometimes works if I just stand on the opposite wall.
So basically Im thinking my wireless card in my laptop is either faulty or just no good?
Can u replace the wireless card with a different one? Maybe the Toshiba ones are just no good? Ive read so many problems with these wireless cards in Toshibas...
Anyone have any ideas? Have I missed any info u need? Ill repost again in a day or so with the types of wireless devices in each laptop.

Hi
At the moment I doubt that your WLAN card is faulty. Before you exchange it you should also update your BIOS and not only the WLAN card driver. Both updates you should download from the Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
I had a similar issue with my Toshiba notebook and WLAN connection. The problem was the WLAN power saving mode in Windows Power Management. There you can also choose a power saving mode for the WLAN card. Disable it and choose Maximum Performance.

IPhone Issues with USB Connection and Bluetooth in GM cars

I recently purchased a 2009 Chevy Cobalt SS/TC and it has a USB connection for an iPod. Prior to the 2.1 updated the USB connection worked flawless as well did my handsfree/bluetooth. I had the Apple Genius Bar check my iPhone for any issues due to a corrupt update but everything turned up fine. When i connect to my car I receive an error message (iPod Did Not Authenticate. Check iPod Version). Also my bluetooth will sync but when you answer the phone using hands free you get no audio from the iPhone or speakers in the car. I used a friends iPod and everything worked fine but when I connect with a new iPod it displays the same error. I have contacted GM but they said talk to Apple.
If anyone can help please let me know.
Thanks

Hey J,
Well you got me thinking about your question, and I guess I didn't get it the first time. Again, I own the same car - 09 Chevy Cobalt SS/TC, Black. A lot of fun! I plugged my iPhone into the radio USB connection and get the same error. The GM radio does not support the iPhone. It will not authenticate. The GM radios' firmware is looking for an iPod, not an iPhone. That is expected. As far as the iPhone and it's Bluetooth, again the iPhone's Bluetooth hands free works fine, except I cannot answer the iPhone during an incoming call without first unlocking the iPhone then pressing the mute button on the steering wheel. For what it's worth the iPhone will charge through the USB connection. I'm a little confused on what you are trying to connect. Bottom line, an iPod should always work, an iPhone, not at all. Lastly, I have purchased the GM Personal Audio Link (PAL) and hope to use it with my iPod so I can put the iPod in the glove compartment. Although I have heard a lot of negative comments and issues with it for being slow and sluggish. If so, I'll be sending it back and I'll stay with the USB connection. I'll let you know how that works.

I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

IPhone 6 and Bluetooth phone connectivity issues with my vehicle: this is how I fixed it.

With so many threads on this topic, I wanted to detail the steps I took to fix my iPhone 6 Bluetooth issues regarding connectivity to my vehicle and handsfree calling. My phone was pairing with my vehicle without a problem and syncing my contacts and call history but when I attempted to make a call (from either the phone or the vehicle screen) the audio went out and I could not hear the call either through the vehicle speakers or on the phone. The call was going through but I was unable to see it on my vehicle screen and/or hear it either the phone or the vehicle screen.
Based on my research and what I have learned so far, the people having problems are those who restored their new iPhone 6 from an iCloud backup from a previous phone, rather than setting up their iPhone 6 as a new phone. I did an iCloud restore from my previous 5s running iOS 8.
First, I am a Verizon customer and I enabled Advanced Calling on my line. After I requested that this feature be added to my line, under “Cellular” settings on my iPhone, I enabled LTE voice & data.
Next steps:
1) Unpair/remove iPhone from the vehicle;
2) Forget/remove the vehicle from the phone Bluetooth settings;
3) Soft reset the iPhone;
4) Reset network settings on the iPhone; and
5) Pair the phone to the vehicle again and attempt to make a call.
If that does not work…
6) Perform a factory reset, erasing EVERYTHING from your phone and set it up as a new iPhone rather than restoring from a backup.
Resetting the network settings seems to be working for some people. It did not work for me. I tried it a few times with no result. I did the dreaded factory reset, paired the phone with my vehicle and had all of my Bluetooth functionality back and was able to use the handsfree phone with zero issues.
I was on the phone yesterday multiple times with Apple, Toyota Entune, Verizon and my Toyota dealer. Verizon blamed Toyota Entune, Toyota Entune blamed Verizon and my Toyota dealer blamed Apple. Nobody had a clue how to fix this issue or what was causing it. I don’t know the exact reason why the previous iCloud backups are killing the Bluetooth connections, I just know what worked for me and I thought it was worth sharing.
Good luck.

The new 8.0.2 update DID NOT FIX THIS ISSUE AT ALL. After you power off and on with the phone, same issue as the 8.0, all 3 of my cars lost Bluetooth connection and shows no signal at all. Good job Apple, what a lousy update you guys did.
2011 Lexus ES350
2011 Subaru STI
2012 Mercedes E350.

CR2008 connectivity issue with BOE Universes(sap and non sap universes)

Hi Experts !!
Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
Thanks&Regards.
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PM

Hi Amit,
Moved to Universe Forum.
If you have a case logged then no point posting here also, this is a public site and not a case management tool.
Once you do get the solution from your case please post it here also to help others if they have the same problem.
Thank you
Don

I have an issue with my iPod touch gen. 5 connecting to my iTunes. iTunes says my device has an error, but it does not specify the error and I can't do nothing. I was transferring more music and editing my playlists. My songs and movies are gone.

What can I do to solve an issue with my iPod touch gen. 5 32 gb on connecting to iTunes on my computer? iTunes says there is an error with my iPod touch, which this was a result of deleting my songs and videos. I was only transferring more songs, videos and editing my playlists. I don't have that much of the songs left. What is the best solution?

And what is the wording of the error message?

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.

Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/

HT204409 I have a new iphone 5 and it won't connect to a wireless router that my old iphone 3GS would pick up. Is there a compatibility issue with some routers or is the antenna weaker in the new iphone 5?

I have a new iphone 5 and I can't pick up a wireless router that I could use with my old iphone 3GS. Is there an issue with the new iphone and is the antenna weaker than the 3GS?

Please read this :
https://discussions.apple.com/message/20053332?ac_cid=tw123456#20053332
Well I copyed it to you here.
Re: Anyone still having IOS 6 wifi issues?
created by mpa9366 in Using iPad - View the full discussion
Having done a lot of reading today and having found a very good online tablet magazine (will post link tomorrow) there seems to be a few tech bods onto the problem.
The magazine I was reading identified wifi problems within hours of the ios 6 release and have been analysing since then with almost daily updates - the story seems to be:
The apple authenthication transmission is normal, it should slip through event prior to a full handshake with the host network being completed - however if not authenthicated then apple will not permit the device to connect (kills the connection) this is designed to protect apple from counterfeiting. So thats problem 1 if you dont receive a token from apple.
Problem 2 is that ios 6 only supports ipv6 (the new ip protocol) whereas outside silicon valley a large proportion of routers modems etc are still ipv4 protocol.
So youre locked into ipv6 in a world where ipv4 devices are everywhere and apple have not allowed for the ability to handle both protocols. This is like GM telling you your car requires an upgrade, everything will improve etc and as part of the upgrade fits a fuel cell motor and stays silent when their upgraded vehicles are simply parked up because they cannot get fuel.
A very basic expectation would have been dual protocol handling - we know the HW supports ipv4 as all wad fine on ios5.
So its going to be hit and miss with networks - more hit than miss in techy areas like silicon valley, but more miss in places like where I am - a small town in rural Switzerland.
Only apple can fix this with a patch to enable ipv4 protocol handling.
There you go. you just need to buy a new router, I'm sure Apple has one for sale, cause it's not there fault for sure.
Wonder why people start to migrate to other devices ?

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

Issues with connecting and with listening

Similar Messages

Maybe you are looking for