Issues with connection busy functionality

Here are a few things I've noticed with the busy connection functionality:
If I want to right click in a SQL worksheet window while a tab has a query running (current or different tab) I get the "connection busy" error. Don't know why this is b/c right clicking should not be contacting the DB so it's not like I'm trying to run another process or something.
I had one tab with a basic select statement and another that was running another script that was taking a while to execute. The tab running had a bunch of insert statements running but not in a pl/sql block. The script had 15,729 inserts. When I tried running a statement on the other tab, I recieved the "connection busy" error, and I clicked abort. Instead of not trying to connect, I kept recieving the "connection busy" error over and over. The second tab came back with results finally. When my other tab with the insert statements was done, I checked the number of rows in my table - 15,717! So it looks like when I was clicking abort the other script was skipping statements or something! Good thing I double checked b/c this nasty little bug would have caused me some grief in the future.

The connection-busy-abort-retry dialog is popped us when a JDBC operation is being performed on the connection and another such operation is requested.
SqlDeveloper uses single connection/session everywhere, so in your case, in the second worksheet, the same connection was being used which was busy through the operation in first worksheet.
Right click on the worksheet, does some JDBC operation, hence you got the dialog in second worksheet.
One workaround is to use unshared sql worksheet (ctrl-shif-n in a woeksheet).
A better solution for above issues is being worked on by the development team that should give you better concurrency and responsiveness.
This would be available in next major release of Sql Developer.
-Raghu
dev. team.

Similar Messages

Issue with executing Business Rules from Planning web

Hi,
We are using Hyperion Planning 9.3.0.1 and we keep getting an issue with the Business Rules. We get an error if we try to run the rules from Planning web. The same rules validates and executes fine if we run it from AAS. This issue gets resolved if we restart the Planning and RMI service. But this issue keeps happening randomly. Is there a permanent resolution to it? Is it a bug or I am missing something here?
Thanks and Regards,
Amol
Edited by: user638718 on Apr 7, 2009 5:20 PM

Hi,
Have you installed any of the patches for 9.3.0.1, I think it goes up to 9.3.0.1.09
One of the fixes was :-
8-665086601 (6588823) – When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
Though I know there has been more attention to fixing known issues on 9.3.1 than 9.3.0.1
Cheers
John
http://john-goodwin.blogspot.com/

JDev 10.1.3.3 - issues with imported Business Components

Hi,
I have got some issues with importing Business Components in JDev 10.1.3.3.
I cannot discover/use the imported components.
What I did is the folowing:
1. In a existing project I extended the default base-classes to create our own layer
2. created a project called ModelShared
2a. configured the project to use the base-classes I created in step 1
2b. created an entitybased-viewobject (RefCodesByDomain)
2c. created bc deployment-descriptors
3. created a project called RelatieModel in the same workspace as ModelShared
3a. added dependencies to the deployment-descriptors as well as the project created in step 2
3b. configured the project to use the base-classes I created in step 1
3c. imported business components
Although I did not recieve any errors during the import of business components, I am unable to add the vo (RefCodesByDomain) to a service.
I do see the package which contains the vo but is has no entries.
Importing the business components to a new BC Project in a seperate workspace did succeed (I could reuse the vo).
I tested a little further and the folowing occurred:
4. I created a new vo in the ModelShared Project
5. I deployed the ModelShared
6. Restarted JDeveloper
7. Got the folowing error message in the console window when expanding a service in my datacontrol pallette:
INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
1-sep-2008 13:23:27 oracle.adf.dt.controls.DataControlsTreeWillExpandListener treeWillExpand
FINER: THROW
java.lang.NullPointerException
 at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.init(JUDTViewReferenceAccessorDefinition.java:108)
 at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.<init>(JUDTViewReferenceAccessorDefinition.java:98)
 at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.createViewObjectDefinition(BC4JDataControlDefinition.java:228)
 at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.addViewObjects(BC4JDataControlDefinition.java:208)
 at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.loadStructure(BC4JDataControlDefinition.java:110)
 at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.getStructure(BC4JDataControlDefinition.java:407)
 at oracle.adf.dt.controls.treemodel.jsr227.JSR227DataControlTreeNode.loadChildNodes(JSR227DataControlTreeNode.java:129)
8. In my other "fresh" bc project I was able to use the newly created vo.
9. When I added a VO to my shared project, all projects that are refering to the shared project loose their vo's in the data-controlpannel
Do you have any suggestions?
Regards,
Romano

Hi,
since this appears to be a WebCenter related issue, I suggest to try the Webcenter forum WebCenter Portal or to log a bug
Frank

I'm having issues with connecting my iPhone 4 to iTunes?

Here's some information:
Apple product: iPhone 4
Computer: Windows 8 (originally) to Windows 8.1 (upgraded version)
Okay, I'm having issues with connecting my iPhone 4 to iTunes. I've connected it via U.S.B. and now everything's not working right the 10th time. Am I to redownload the iTunes software once again or will I never be able to add music anymore?

OffTime wrote:
What do you mean with logging?
Hans
Close any open applications.
Click the Apple icon top left of the screen.
Select the bottom option in the cascading menu: Log Out (your user name).
Log in a Guest.
This will dertermine if there is a problem with your Admin account.
Al

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.
I have contacted apple via email and tried all the steps they have recommended and it is still not working.
I have tried disabling my McAfee and that does not work either.
Anyone that the phone number to apple express so I don't have to keep waiting for them to email within 48 hours?
Thanks.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT STATE SERVICE VERSION80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT STATE SERVICE VERSION
80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open tcpwrapped
443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5: 9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open netbios-ssn
631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open tcpwrapped
7435/tcp open tcpwrapped
8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open jetdirect?
9220/tcp open hp-gsg HP Generic Scan Gateway 1.0
137/udp open netbios-ns Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open snmp SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
| Wifi0
| IP address: 192.168.1.211 Netmask: 255.255.255.0
| MAC address: a0:d3:c1:bd:c8:32 (Unknown)
| Type: ethernetCsmacd Speed: 10 Mbps
| Status: up
|_ Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
| TCP 0.0.0.0:7435 0.0.0.0:0
| TCP 192.168.1.211:56076 15.201.145.52:5222
| UDP 0.0.0.0:3702 *:*
| UDP 127.0.0.1:666 *:*
|_ UDP 192.168.223.1:67 *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
| NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
| Names
| HPA0D3C1BDC832<00> Flags: <unique><active><permanent>
| MSHOME<00> Flags: <group><active><permanent>
| HPA0D3C1BDC832<20> Flags: <unique><active><permanent>
| HPPS7525<00> Flags: <unique><active><permanent>
|_ HPPS7525<20> Flags: <unique><active><permanent>
| smb-security-mode:
| Account that was used for smb scripts: guest
| User-level authentication
| SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT ADDRESS
1 23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
 Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Issues with Small Business Switch config

Hi, I know that if I read the documentation I will come to the answers but I would really like some input from someone with more knowledge than me. I have an issue with Cisco SF300 , one of the Small Business Switches. I have a single interface on my router and I need to separate my internal networks , I thought that one way would be to use VLANs. On my two internal networks one network only has unmanaged D-Link switches, the other has the Cisco SF300 so I did as follows.
On the Cisco Switch, all ports default to Trunk ports. I have changed FE1-FE24 and GE1-2 to access ports.
Created two VLANS and placed FE1-FE24 in VLAN10 (also my management VLAN) , GE3 is a trunk Port for VLAN20 untagged, VLAN 20 uplinks to my DiLink Switches. This way traffic from my unmanaged switches comes in on a trunk port untagged on VLAN20.
GE4 is a trunk port and I have assigned VLAN1 untagged, VLAN10 tagged and VLAN20 tagged. VLAN 10 and VLAN 20 then forward to my Router.
The plan was to connect GE4 to my router however I had two things happen I can not explain.
Firstly as soon as I connected my D-Link to GE3 the LAN on VLAN20 went down, I could not ping Servers from PCs etc, all devices are connected to the unmanaged D-Links. Secondly the VLAN Assigment changed on GE3 and GE4 , VLANs 10 and 20 disappeared and only the default VLAN was assigned, also under VLAN Settings my VLAN interface state for VLAN20 shows Disabled. Also one of my access ports FE12 keeps changing VLAN.
Can anyone offer any suggestions as to what might have crashed the LAN and why my VLANs change. I did write my running config to the start up config by the way.
I added two screen shots.
I would seriously appreciate some help.
Thanks
Bob

Hi Garrett, thanks for your reply to my post, I hope you are well. I called Cisco support, they told me that they could not understand why this was happening and suggested a firmware upgrade, usually something I should have considered right from the beginning. This solved the issue for me.
Thanks
Bob

Issues with connection to Officejet Pro 8500

Hi folks,
I have a user at home with a Officejet 8500 connected to a BT home hub via wifi. it worked initially when we set it up a few months back however rarely and intermitantly since then. It notmally shows as offline in print properties and the HP app cant connect to it.
Some network basics
Router IP: 192.168.1.254
Printer IP: 192.168.1.66 (via DHCP)
Alt Printer IP: 192.168.1.100 (Static IP Attempt with no joy)
Other devices in network:
Desktop pc (Not work kit)
Iphone (his wifes)
Laptop PC (work kit)
We do have him connected via VPN however Im inclined not to believe that its aproblem witht hat as we have a dozen users with the same setup and the VPN dosent cause them headaces.
Pining the hostname of the printer results in a weird IP external IP address (87.239.20.209) not the local one. Ok so I put a change in the hostfile to point to the Printers IP. No joy there.
Tried a static IP.... you know just cos... (and in my mind best practice for a printer anyway!)
So Any ideas or any one experianced similar issues with this?
Cheers in advanced folks

We have been having offline issues with this same printer. I have tried to install all new software to a Win 7 64 bit computer but the full software cannot complete. It detects the printer on the network, goes through the network settings but when it gets to Installing Your Printer, it fails with this statement: 'Printer setup has failed to complete. Click retry to try installing the printer again or click next to continue installation without connecting to the printer now.'
Now, I am connected via the web to the printer and all is well on the status screen. I have updated the firmware too. I read through many blogs of others having the same issue with no real resolution. All those that were connected to it are now showing 'offline' even though they can ping it and access it directly on the web - but none can print. I have tried downloading and installing the HP Print and Scan Doctor but it needs the 'full' software installed in order to run.....but the full software cannot complete it's install because of the above.
I have always loved HP printers but this one deserves to be in the land fill!

Performance issues with pipelined table functions

I am testing pipelined table functions to be able to re-use the base_query function. Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? The processor function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
 TYPE resultset_typ IS REF CURSOR;
 TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
 TYPE table_typ IS TABLE OF row_typ;
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ;
 c_default_limit CONSTANT PLS_INTEGER := 100;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ
 IS
 o_resultset resultset_typ;
 BEGIN
 OPEN o_resultset FOR
 SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB;
 RETURN o_resultset;
 END base_query;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
 IS
 aa_source_data table_typ;-- := table_typ ();
 BEGIN
 LOOP
 FETCH p_source_data
 BULK COLLECT INTO aa_source_data
 LIMIT p_limit_size;
 EXIT WHEN aa_source_data.COUNT = 0;
 /* Process the batch of (p_limit_size) records... */
 FOR i IN 1 .. aa_source_data.COUNT
 LOOP
 PIPE ROW (aa_source_data (i));
 END LOOP;
 END LOOP;
 CLOSE p_source_data;
 RETURN;
 END processor;
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT /*+ PARALLEL(t, 5) */ colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM TABLE (processor (base_query (argA, argB),100)) t
 GROUP BY colC
 ORDER BY colC
 END with_pipeline;
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM (SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB)
 GROUP BY colC
 ORDER BY colC;
 END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PM

Earthlink wrote:
Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

Dell Laptops E7440 & E7240 - Issues with connecting to MDT 2012 deployment share

Hi,
Good afternoon.Need help on this please
-Test laptops Iam using are 2 * E7440 and 1*E7240. One laptop of model E7440 has our image installed and other two (1*E7440 & 1*E7240) are shipped from Dell with default Win 7 64 bit OS.
-Test desktops Iam using are Dell Optiplex 3020 & Dell 3010 . Both models have our own images of Win 7 64 Bit.
-Laptops and desktops are on same network .
-For OS deployments we have MDT 2012.
-While there are no issues with desktops, all the laptops mentioned above don’t connect to MDT deployments share . The detailed error message I get when I run a litetouch ISO is ‘A connection to the deployment share could not be made. Connection OJ.Possible
cause:invalid credentials. Retry : Try again to connect to the deployment share.’
-Have injected all possible network & storage drivers mentioned by Dell & Intel into MDT boot image but the problem still persists. Still WinPE doesn’t detect network adapter wherein IPaddresses are not picked in WinPE mode.
-Have been testing each and every driver by manually loading them into Winpe mode to see if they pick up the IP addresses and I finally found one driver by name ‘e1d63x64.inf ‘ which I downloaded directly from Intel website. This one is picking IP Address
in WinPE mode when loaded manually. Also have tested the connectivity to MDT server in WinPE mode with net use command and it was successful.
Have injected this driver into MDT Laptop deployment share, regenerated the ISO and tried again however Iam still unable to connect to the deployment share with litetouch ISO.
The above driver is very much part of set of network drivers on Dell website too.But it doesn’t work.
-Have also tried combination of network & storage drivers from Dell website (along with the above one mentioned ) injecting them into the MDT laptop boot image but no luck.
-Every time I make changes to drivers in boot image,I update deployment share & recreate boot image .
-This very litetouch iso connects to MDT deployments share for Dell desktop models 3010 & 3020 but have issues with laptop models E7440 & E7240. This means any connectivity or access issues can be ruled out. Also no problem with our image cause
this happens even with brand new shipped laptops with your inbuild win 7 OS.
-Have tried all options suggested on internet,tested all the drivers suggested but no luck.
-For example I tried latest E7440 netwrok & storage drivers ,Dell Win PE drivers,drivers from Intel website,etc individually as well as in combinations but the issue persists.
-If you google many express similar issues with these laptop models.
Though I used the drivers suggested by various bloggers,nothing worked for me.
Any help on this is appreciated.Thanks in advance.

Hi,
I have several E6420, O3010 and since a week also some E7440 and E7240 on site.
I never had issues using the current Dell PE package for MDT.
At the moment my PE contains only the drivers from the Dell PE 3.0 package (WinPE3.0-Drivers-A13-D67JC)
and all my systems mentioned abobe have no issues connecting to the deployment share.
(btw: I have also some older E6400, E6410 and O390 I do no longer support, they
are supported by the pack Dell-WinPE-Drivers-A05.CAB according
to the Dell site, but I just started a deplymenst on a E6410 and is is also workign with just the latest PE pack)
I'd
suggest you start over with your deplyoment share using at least MDT2012 Update 1.
Create a folder "PE" under "Out-of-Box Drivers" and extract latest Dell PE pack and import he drivers there
Create a selection profile e.g. "PE Drivers" and include just the "PE" folder created above
When configuring the Windows PE settings of your deployment share select "PE
Drivers" selection profile for the driver injection in the "Drivers and Patches" to keep the PE image free of not needed drives.

Issue with Delta in Function Module

Hi Team,
I have an issue with delta in Genric extraction using function module.Full load is working fine and i have taken post_date as delta field.plz chk the code if any delta related statements are missing.
FUNCTION ZRSAX_BIW_MANGEMENT_RAT .
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZQMBW_FUJ_MANAGEMENT OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table MANAGEMENT RATING
TABLES: ZQMBW_MANAGEMENT.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
 S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
 S_CURSOR TYPE CURSOR.
RANGES: POST_DATE FOR ZMMTVEND_RATING-POST_DATE,
 VENDOR FOR ZMMTVEND_RATING-VENDOR.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
 buffer input parameters
 prepare data selection
Check DataSource validity
 CASE I_DSOURCE.
 WHEN 'ZQMMANAGEMENT_DS'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
 LOG_WRITE 'E' "message type
 'R3' "message class
 '009' "message number
 I_DSOURCE "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDCASE.
 APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
 S_S_IF-REQUNR = I_REQUNR.
 S_S_IF-DSOURCE = I_DSOURCE.
 S_S_IF-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
 APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE. "Initialization mode or data extraction ?
 IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
 LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'VENDOR'.
 MOVE-CORRESPONDING L_S_SELECT TO VENDOR.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = VENDOR-LOW
 IMPORTING
 OUTPUT = VENDOR-LOW.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = VENDOR-HIGH
 IMPORTING
 OUTPUT = VENDOR-HIGH.
 APPEND VENDOR.
 ENDLOOP.
 LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'POST_DATE'.
 MOVE-CORRESPONDING L_S_SELECT TO POST_DATE.
 CONCATENATE L_S_SELECT-LOW6(4) L_S_SELECT-LOW3(2) L_S_SELECT-LOW+0(2) INTO POST_DATE-LOW.
 CONCATENATE L_S_SELECT-HIGH6(4) L_S_SELECT-HIGH3(2) L_S_SELECT-HIGH+0(2) INTO POST_DATE-HIGH.
 APPEND POST_DATE.
 ENDLOOP.
**Get Management rating details
 OPEN CURSOR WITH HOLD S_CURSOR FOR
 SELECT VENDOR POST_DATE OVERALL_MNGT_RAT OVERALL_DEV_RAT FROM ZMMTVEND_RATING WHERE VENDOR IN VENDOR AND POST_DATE IN POST_DATE .
 ENDIF.
Fetch records into interface table.
 FETCH NEXT CURSOR S_CURSOR
 APPENDING CORRESPONDING FIELDS
 OF TABLE E_T_DATA
 PACKAGE SIZE S_S_IF-MAXSIZE.
 S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
 IF SY-SUBRC <> 0.
 CLOSE CURSOR S_CURSOR.
 RAISE NO_MORE_DATA.
 ENDIF.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.

Hi
Check URLs:
How to populate the ranges using FM for the SELECTs
Re: Generic Delta Function Module

Issue with "firstRecord" Business Component method of JAVA Data bean API.

Hi,
Following is my use-case scenario:
I have to add or associate child MVG business component (CUT_Address)
with the parent business component (Account) using JAVA Data bean API.
My requirement is: first to check whether child business component(i.e. CUT_address) exists. If it exists then associate it with parent business component (Account)
otherwise create new CUT_address and associate it with account.
Code (using JAVA Data bean APIs) Goes as follows:
SiebelBusObject sBusObj = connBean.getBusObject("Account");
parentBusComp = sBusObj.getBusComp("Account");
SiebelBusComp parentBusComp;
SiebelBusComp childBusComp;
// retrieve required account.. Please assume Account1 exists
parentBusComp.activateField("Name");
parentBusComp.clearToQuery();
parentBusComp.setSearchSpec("Name", "Account1");
sBusComp.executeQuery2(true, true);
sBusComp.firstRecord();
Counter = 0;
while (counter < Number_Of_Child_Records_To_Insert)
childBusComp = parentBusComp.getMVGBusComp("City");
associatedChildBusComp = childBusComp.getAssocBusComp();
childBusComp.activateField("City");
childBusComp.clearToQuery();
childBusComp.setSearchSpec("City", Vector_of_city[counter]);
sBusComp.executeQuery2(true, true);
if( sBusComp.firstRecord() )
// Child already exist and do processing accordingly
else
// Child does not exist and do processing accordingly
childBusComp.release();
childBusComp = null;
associatedChildBusComp.release();
associatedChildBusComp=null;
Now the issue with this code is: For the first iteration, SbusComp.firstRecord returns 0 if records does not exist. However from the second iteration, SbusComp.firstRecord returns 1 even if there is no record matching the search specification.
Any input towards the issue is highly appreciable.
Thanks,
Rohit.

Setting the view mode to "AllView" helped.
Thanks for the lead!
In the end, I also had to invoke the business component method SetAdminMode with "true" as the argument so that I could also modify the records from my script.

PI 7.1 upgrade related issue (With removeContexts node function)

Hi all,
We have upgrade from PI 7.0 to 7.1, there was no changes done to the maps...but when we execute the old maps it give no value in the queue error: (this occurs during run time)...
But when I test the payload it executes fine...I have found and issue with remove context (the queue display in 7.0 is different than in 7.1)
It doesn't end with SUPPRESS context change...we have observe that the maps which has removeContext are failing...
Is there any OSS note on this issue...anyone faced this issue?
Any suggestions?
Thanks,
Srini
Edited by: Srinivas Davuluri on Oct 2, 2009 6:55 PM

I have added the parameter to the init method of the Functions tab in our message mapping - retainlastValueofPreviousContext=true; according to the blog...but still the same error...
But, when I execute in the Test tab it works fine;
Any other suggestions or anyone who has faced this issue...we are on PI 7.1 SPS7
Thanks,
Srini
Edited by: Srinivas Davuluri on Oct 5, 2009 9:46 AM

Perf issues with Time series function in OBIEE

Attached is the SQL:
SELECT SUM (T256675.ACTIVITY_GLOBAL2_AMT) AS c1,
SUM (T256675.ACTIVITY_GLOBAL3_AMT) AS c2
FROM X_FINANCIAL_HIERARCHY_DH T610485 /* Dim_X_GLACCT_ALTVIEW_D */,
X_FINANCIAL_HIERARCHY_DH T610414 /* Dim_X_MGMT_ENTITY_D */,
W_GL_ACCOUNT_D T256463 /* Dim_W_GL_ACCOUNT_D */,
W_GL_BALANCE_F T256675 /* Fact_W_GL_BALANCE_F */,
SAWITH3,
SAWITH6
WHERE ( T256463.ROW_WID = T256675.GL_ACCOUNT_WID
AND T256463.X_FIN_HIER1_WID = T610485.ROW_WID
AND T256463.X_FIN_HIER5_WID = T610414.ROW_WID
AND T256675.BALANCE_DT_WID = SAWITH3.c3
AND SAWITH6.c1 = SAWITH3.c1
AND T610414.ACCOUNT_HIER8_NAME = 'Worldwide'
AND T610414.HIERARCHY_SOURCE = 'EntityMgmt'
AND T610485.ACCOUNT_HIER7_NAME = 'Controllable Expenses'
AND T610485.HIERARCHY_SOURCE = 'AltViews'
AND SAWITH6.c3 = '2009 / 11'
AND SAWITH6.c2 >= SAWITH3.c2
The SAWITH3 and SAWITH6 dimensions using time series fuctions are causing a full table scan on W_GL_BALANCE_F and W_GL_ACCOUNT_D . Though we are interested in just getting 2009/11 data; the queries generated by time series function TODATE is taking us against entire W_DAY_D data and is causing several performance issues.
W_GL_BALANCE_F table has index on GL_ACCOUNT_WID and BALANCE_DT_WID.
How can we force to use index on these columns for better performance.
Please advise us on the right approach to improve performance.
SQL for SAWITH3
===========
WITH SAWITH0 AS
SELECT T31328.ROW_WID AS c3, T31328.PER_NAME_FSCL_QTR AS c4,
ROW_NUMBER () OVER (PARTITION BY T31328.PER_NAME_FSCL_QTR ORDER BY T31328.PER_NAME_FSCL_QTR DESC)
AS c5,
T31328.PER_NAME_FSCL_MNTH AS c6,
ROW_NUMBER () OVER (PARTITION BY T31328.PER_NAME_FSCL_QTR, T31328.PER_NAME_FSCL_MNTH ORDER BY T31328.PER_NAME_FSCL_QTR DESC,
T31328.PER_NAME_FSCL_MNTH DESC) AS c7
FROM W_DAY_D T31328 /* Dim_W_DAY_D_Common */),
SAWITH1 AS
SELECT CASE
WHEN CASE SAWITH0.c5
WHEN 1
THEN SAWITH0.c3
ELSE NULL
END IS NOT NULL
THEN RANK () OVER (ORDER BY CASE SAWITH0.c5
WHEN 1
THEN SAWITH0.c3
ELSE NULL
END ASC NULLS LAST)
END AS c1,
CASE
WHEN CASE SAWITH0.c7
WHEN 1
THEN SAWITH0.c3
ELSE NULL
END IS NOT NULL
THEN RANK () OVER (PARTITION BY SAWITH0.c4 ORDER BY CASE SAWITH0.c7
WHEN 1
THEN SAWITH0.c3
ELSE NULL
END ASC NULLS LAST)
END AS c2,
SAWITH0.c3 AS c3, SAWITH0.c4 AS c4, SAWITH0.c6 AS c5
FROM SAWITH0),
SAWITH2 AS
SELECT MIN (SAWITH1.c1) OVER (PARTITION BY SAWITH1.c4) AS c1,
MIN (SAWITH1.c2) OVER (PARTITION BY SAWITH1.c4, SAWITH1.c5)
AS c2,
SAWITH1.c3 AS c3
FROM SAWITH1),
SAWITH3 AS
SELECT DISTINCT SAWITH2.c1 + 5 AS c1, SAWITH2.c2 AS c2,
SAWITH2.c3 AS c3
FROM SAWITH2),
SQL for SAWITH6
===========
SAWITH4 AS
SELECT T31328.PER_NAME_FSCL_MNTH AS c3, T31328.ROW_WID AS c4,
T31328.PER_NAME_FSCL_QTR AS c5,
ROW_NUMBER () OVER (PARTITION BY T31328.PER_NAME_FSCL_QTR ORDER BY T31328.PER_NAME_FSCL_QTR DESC)
AS c6,
ROW_NUMBER () OVER (PARTITION BY T31328.PER_NAME_FSCL_QTR, T31328.PER_NAME_FSCL_MNTH ORDER BY T31328.PER_NAME_FSCL_QTR DESC,
T31328.PER_NAME_FSCL_MNTH DESC) AS c7
FROM W_DAY_D T31328 /* Dim_W_DAY_D_Common */),
SAWITH5 AS
SELECT CASE
WHEN CASE SAWITH4.c6
WHEN 1
THEN SAWITH4.c4
ELSE NULL
END IS NOT NULL
THEN RANK () OVER (ORDER BY CASE SAWITH4.c6
WHEN 1
THEN SAWITH4.c4
ELSE NULL
END ASC NULLS LAST)
END AS c1,
CASE
WHEN CASE SAWITH4.c7
WHEN 1
THEN SAWITH4.c4
ELSE NULL
END IS NOT NULL
THEN RANK () OVER (PARTITION BY SAWITH4.c5 ORDER BY CASE SAWITH4.c7
WHEN 1
THEN SAWITH4.c4
ELSE NULL
END ASC NULLS LAST)
END AS c2,
SAWITH4.c3 AS c3, SAWITH4.c5 AS c4
FROM SAWITH4),
Thanks
Srini Pendem

Hi Srini,
I've had quite a bit of performance issues with ToDate and Ago. I tended to create materialized views on my fact tables that would materialize those values as columns and that way I would avoid having to use the ToDate or Ago functions. Is there any chance you can implement a similar solution and bypass the time series functions entirely?
Just to check, those tables belong to BI Apps, right? If so, you can log an SR about the performance issue since it's an issue with the model that Oracle sold you.
Good luck!
-Joe

Issue with Citrix Business Objects full client

Hi ,
I have issue with my database pasword being expired. I ran a recovery and it works fine for me.
Since we are using the citirx installation the bomain.key is available on the citrix server which is copied across the user profile when they are login into citrix server via the logon script.
I still could not find whether the log on script is correct or not can any one of you let me know what I can use to copy the bomain.key using citrix usrlogon.cmd script.
Regards,
Ramesh

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek

Issues with connection busy functionality

Similar Messages

Maybe you are looking for