Issues with Cox Cable and mail server?

I need an accurate port to send mail. I have never been able to use my mac mail (send or receive) and my cox mail (worked for both at one point) on entourage (cox) my outgoing mail does not work, however, it will receive mail? I am using the latest version of Leopard and I disabled my firewall? Cox wouldn't help me they said to just contact apple? I have the correct pop server (pop.east.cox.net) and SMTP server (smtp.east.cox.net). This is really bothering me so if someone could help I would appreciate it. I currently have my mail set on port 110 for both outgoing and incoming.

strawberrydress wrote:
I currently have my mail set on port 110 for both outgoing and incoming.
And you changed the SMTP port from the default of 25 because...?

Similar Messages

Multiple issues with Mavericks update and Mail

I have a MacBook Pro mid 2009 2,53 GHz 13-inch. It has 4GB of RAM and a Hitachi 500GB 5400 rpm disk with about 200GB of free space. After working on 10.6.8 for a long time I have upgraded to 10.9.2. I formatted the internal disk, made a clean install of the new system and rebuilt from a Time Machine backup I had made before. The system has slowed down to snail speed (even the simplest actions like opening a new window in the Finder take at times 10 to 15 seconds with the spinning beach ball appearing. Also (and maybe even more serious) my emails became completely messed up. First, all headers and mails got mixed up and several mails didn’t appear, after rebuilding the mailboxes about 60% of my emails were completely lost. I would like to recover my mails from Time Machine but it’s impossible to access emails from before the system upgrade. Am I doing something wrong? Is my computer really too old? How can I give a second try at importing all my mails from the old system? This is the crappiest update I have ever had (been working on Apple since 1994).

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

Cox cable and smtp

Hi! I am trying to get smtp to work with cox cable. I am using the smpt.east.cox.net server. Apparently, Cox will not support any Mac OS-X email clients.
I have tried using ports 25 & 587 with and without the various authentication. Also, turned on and off the firewall.
I have also tried using entourage to see if this is Mail specific, but no luck.
I can browse and receive mail, but cannot send mail. In reviewing the archives, it seems that this has been a problem in the past, but no resolution was posted.
Anybody got this to work?
Mac mini duo intel Mac OS X (10.4.10) 1.0 GB ram
iMac G5 20" Mac OS X (10.4.4) 1.5GB ram

I am using the smpt.east.cox.net server
Is this a typo with your post only since it should be smtp and not smpt?
Did Cox technical support at least confirm the SMTP server you are using is correct - smtp.east.cox.net?
The required account settings - the incoming mail server and outgoing mail server and if the SMTP server requires authentication and the server port for the SMTP server, etc. is platform (OS X or Winblows) and email client independent.
Keep the built-in firewall included with OS X enabled which has no effect on this.
Since you cannot send messages with Entourage or Mail using the identical SMTP server settings, this seems to indicate you are not using the correct SMTP server settings and a simple typo can be the cause.
Any error message provided and if so what?

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

SAPCONNECT - RFC between SAP BW system and Mail Server

Hello Everybody,
Iam trying to enable <b>Information Broadcasting</b> feature in SAP BW System i.e; i want the queries to be send to users from BW system to their Email Ids for which i have made configurations for SMTP node in SICF and SCOT transactions.My problem is that do i need to create an RFC between BW system and Mail Server ,if yes iam not getting the way to do this and wt all parameters need to be set there .If somebody can plz guide me with the parameters that need to be set for SAPCONNECT or send me some good guide which details the creation of RFC ,I shall be highly obliged.Iam struggling with this issue since many days,You can send the guide to me on my email Id [email protected] .Your help shall be of gr8 support.Kindly revert at earliest.
regards,
Saumya

Hi,
My understanding is -
you need to following setting to send mails-
http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
Need this, if planning to use fax, SMs etc-
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/content.htm
hope it helps
regards
Vikash

Issue with Anonymous Authentication and updating or starting new projects

So 2 weeks ago I had a post about Anonymous Authentication found here:
https://social.technet.microsoft.com/Forums/office/en-US/9b0e6eec-190a-4b48-a280-6adef441659a/issue-with-anonymous-authentication-and-people-picker-and-reports?forum=sharepointgeneral&prof=required
That issue has been resolved but has created a new issue. We have Anonymous Authentication disabled but when one of our users tries to make a new project she gets the following:
Unexpected response from server. The status code of response is '0'. The status text of response is ''.
When she tries to edit an existing project, she gets the following:
The server was unable to save the form at this time. Please try again.
If I re-enable the Anonymous Auth. everything works for her again, but then we face the issue from the original post with reports not publishing.
Any ideas on how to make everything get along?

#apDiv2 {
    position: absolute;
    width: 698px;
    height: 299px;
    z-index: 1;
    left:50px;
    top: 117px;
    overflow: scroll;
Don't forget to fix your code errors. You're still missing a <body> tag in your markup.
Nancy O.

Is anyone else having issues with Lightening cables wearing out fast

Is anyone else having issues with Lightening cables wearing out fast

It does happen. Search Google and you will find many instances.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Why can i not connect apple tv to the new A&E app with cox cable?

Why can i not connect apple tv to the new A&E app with cox cable?

Currently users must be Verizon Fios, Direct TV, or Optimum customers to activate the A&E channel.

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Issues with Cox Cable and mail server?

Similar Messages

Maybe you are looking for