Issues with cross-site CAS redirect of OWA users

Hi,
I am having an issue with our CAS servers, possibly since upgrading to SP3 (I am not 100% if the upgrade caused it). We are currently on Exchange 2010 SP3 RU4.
I have tested logging into OWA on each CAS server with a mailbox from the same site as the CAS, and it works fine.
But if I am using a mailbox from the opposing site, I get this scenario:
1. User reaches site 1 CAS server
2. User logs into site 1 CAS server with a site 2 mailbox
3. Site 1 CAS server redirects the user to another form authentication on a site 2 CAS with this URL:
https://Site2CAS.domain.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fSite2CAS.domain.com%2fowa%2fping.owa
4. User again fills out the form to log in
5. User gets a blank page with this URL:
https://Site2CAS.domain.com/owa/ping.owa
The workaround is that the user then can get their inbox page to load by deleting out the "ping.owa" from the URL. But obviously this is not the intended user experience.
The redirect would apparently work fine if it wasn't for the addition of this "ping.owa" to the URL. Although I would prefer the user only have to fill the forms authentication out once, the main problem is the blank page.
Thanks

Rule of the GAME
For scenario:
CAS Array in Internet Facing AD Site and CAS Array in non Internet facing AD site
It will be CAS Proxy and NOT Redirection
TO force exchange to use Redirection only, set external URL in non Internet facing site CAS as $Null
Internet Facing Site
Internal URL= CAS NLB internal FQDN for that site CAS Array
External URL= CAS NLB Alias published in external DNS
Authentication= Form Based with Basic Auth
Non Internet Facing Site
Internal URL= CAS NLB internal FQDN for that site CAS array
External URL= Null
Authentication= NON Form Based (Integrated Windows Auth)
Thats All
Understanding Proxying and Redirection
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Thanks,
Soumen
Soumen Ghosh

Similar Messages

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

Issue with Cross-Company code transactions and Extended Withholding tax

Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

Having issues with profile manager on 10.9 loosing users/device assignments.

I'm having issues with profile manager on 10.9 loosing users/device assignments. Luckly I only have arround 70 devices added so far. The first time it happened I thought it was just a freak thing, but it has just happened again. What I find weird is nothing on the server was changed, no devices added. So when this happens my users phones lose access to email, because I'm using variables, which rely on the user being assigned to the device. Anyone know how to fix this, and if not. Does anyone know how to backup and restore just profile manager in 10.9. Thanks.

I enabled all users in my AD "Domain Users" group access to "Profile Manager". I had also initially enabled "Profile Manager" access for a few individual users. Those users did not loss the device assignments. I'm not absolutely sure why/if allowing access for a group is causing this issue. Enabling access for each person would be very time consuming.... Maybe adding access to the individual users is importing that user into OD?

Having issues with sending attachments via iMail to PC users

Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?

You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
You can use my referral link http://db.tt/MXNpy62 to create an account.

I'm experiencing 2 issues with a site I'm working on that I can't figure out...

I'm developing a site for a local 5-star restaurant, and I'm almost done with the development. Unfortunately, I'm a lot better at design then coding, and I have a couple of problems that I have not found solutions to.
If you have a few minutes, I'd love some advice on how to fix these. They are confusing me a lot...
1) My pages have a footer that attached to the bottom of the content of the page. On pages that end with tables, there's space between the content and the footer. On pages without tables, it looks fine. Examples:
Broken:
[1] http://www.dorseygraphics.com/review/wclg/site_05/winelist.html
Not broken:
[2] http://www.dorseygraphics.com/review/wclg/site_05/contact.html
2) My background image contains some complex elements that overlap (like vines overlapping the content area just a bit on either side). the client LOVES this, so it's not an option to remove. My background is currently a large PNG that easily takes care of the overlapping issue with a simple BG image. But it runs out at the bottom of the page, and some of the pages have content that it too tall for the background.
Example:
[3] http://www.dorseygraphics.com/review/wclg/site_05/reviews.html
How would you go about solving this problem? I'm thinking the easiest way is to add a new containing DIV and use it to extend the content area down, but that would mess up the header (I think). I'm confused.

1) My pages have a footer that attached to the bottom of the content of the page. On pages that end with tables, there's space between the content and the footer. On pages without tables, it looks fine. Examples:
Broken:
[1] http://www.dorseygraphics.com/review/wclg/site_05/winelist.html
Not broken:
[2] http://www.dorseygraphics.com/review/wclg/site_05/contact.html
The problem here is the background image. Do you have the image without the beige background in the center? If so what you need to do is leave the background of the body as the URL to the image (without the beige in the center), no-repeat, and leave the color as you have. Then move the lighter beige color background to the container with the navigation and content.
2) My background image contains some complex elements that overlap (like vines overlapping the content area just a bit on either side). the client LOVES this, so it's not an option to remove. My background is currently a large PNG that easily takes care of the overlapping issue with a simple BG image. But it runs out at the bottom of the page, and some of the pages have content that it too tall for the background.
Example:
[3] http://www.dorseygraphics.com/review/wclg/site_05/reviews.html
How would you go about solving this problem? I'm thinking the easiest way is to add a new containing DIV and use it to extend the content area down, but that would mess up the header (I think). I'm confused.
If you look at my above answer I don't think this is a huge problem. In CSS3 (Safari, Firefox, Chrome, IE9) you can have multiple background images, one static and one repeating in your case. However, older browsers will not see this, most notably IE 8 and earlier. You could put the initial image in one layer and make the body background a repeating image but you run the risk of the layers not aligning.
Another alternative is to set the max-height of the content container and then set the overflow attribute to scroll in the CSS (overflow: scroll;). That would make the content container scroll independantly from the page.
A final alternative would be to discuss the pages with the client again. For instance with the wine list there are different types of wines. You could have nested tabbed panels, or you could make a page for each wine type sparkling/white, red, etc. and then have tabbed panels underneath to make the lists shorter. Otherwise the "Significant Others" or "Riesling" get lost at the bottom of the page, regardless of your background, and users do not know those wines are offered.

Strange issue with iWeb site, please help

Hi everyone,
Until recently, I've been keeping an iWeb blog of my time in India. Nothing too complicated, just stories and photo albums. However, recently something strange has happened, and the website is no longer displaying correctly. It looks fine in iWeb, and when I publish it in a folder and open it locally, everything is fine. However, after uploading it to my hosting provider, it looks like this:
http://www.egbertopreis.nl/India/
(screenshot of what it looks like here: http://egbertopreis.nl/website_screenshot.PNG )
This is a screenshot from iWeb of what it should look like: http://www.egbertopreis.nl/iWeb_screenshot.png
I'm using the 'darkroom' theme, but as you can see, something is clearly wrong. It is not displaying the menu correctly, the layout looks strange and it isn't loading any of the articles. The other pages are accessible if you navigate there directly, but there you have the same problem.
It looks like, for some reason, the CSS and javascript elements cannot be loaded, although I have no idea why this might be the case. They are all just static files, and it worked fine until about a week ago.
Although I'm an IT professional, I have literally no idea what could cause a problem like this. I went with iWeb because I wanted to use an 'easy' solution and not over-engineer something for once
Usually what I'd do in a situation like this, is just purge the whole site and re-upload it. However, since I'm traveling around, I don't have fast internet access anywhere and the site is now so large that it would take forever to completely re-upload. This is also the reason why I can't troubleshoot it properly myself...
Any help (or even words of encouragement :-)) whatsoever would be extremely welcome. Thanks in advance!
Message was edited by: Heliode
Edit: Forgot to mention what I already tried myself;
- deleted the HTML and XML files and let iWeb do 'publish changes'. Everything was re-uploadeded, but issue remained.
- Deleted the 'Scripts' folder on the remote host, and manually re-uploaded from locally published folder. No effect.
- Tried randomly changing layout items in the hope that any potentially corrupted files might be overwritten after publishing. No effect.

Hi Roddy, thanks for your reply. It wasn't just me though; a lot of other people from back also reported the same issue. I was also getting the same thing from behind a wired connection. You can still see and experience the issue yourself if you look here.
I've since 'resolved' the issue by getting a .Mac trial account. A friend helped me move the whole blog over there, where the site works as it is supposed to:
http://web.me.com/eggmeister/India/
Therefore the issue has to be with the hosting. Right now I'm suspecting it might be some obscure configuration issue with the hosting company's server. Maybe something like too low a setting for Apache's 'MAX REQUESTS'. This might cause issues with all the javascript going on in the iWeb pages, loading elements back and forth. I'm in contact with the hosting provider, and will let you know what I find. Might be useful for future reference.

I am having issues with a site for work. it loads all the links on the left side of the screen. is there a way to fix this or get an older version of fire fox?

Its my office intraweb and I was told its not compatible with this upgrade

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Issue with normal page link redirecting to SSO page / forbidden page

Hi,
I am having an issue with a number of pages within my portal.
I have a 'List of Objects' that has been working for some time, each link in the list linked to another page.
Just lately a number of pages that are linked to within this list are not loading correctly.
When one of the items is selected, the correct page is initially displayed, but then after a couple of seconds the page is redirected to the 'Single Sign-On' page, or alternatively the page is redirected to a 'Forbidden' page with this error:
Forbidden
You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
(This page will also show up after the user tries to login when the page is redirected to the SSO page).
As well as this issue occuring at the front end, the same issue is happening when the pages are loaded from the back end, in the Navigator.
This issue is even happening when the page is opened up in 'edit' mode using the ORCLADMIN user.
Any help is greatly appreciated!!
Amanda.

Figured it out...

ISSUE WITH SUPPLIER SITE OPEN INTERFACE IMPORT PROGRAM in R12

I am facing issue while submitting supplier site open interface import program programmatically using fnd_request.
I am uploading the interface tables with the mandatory data and running the standard Request Set for Suppliers.The program is creating the Suppliers but is unable to create the Supplier Sites.It is getting completed with no rejections as well as imported records.
It is updating the Supplier Sites Interface table (ap_supplier_sites_int ) with status as rejected with no rejected records in ap_supplier_int_rejections table.
I am using the following code.
Step 1 - call set_request_set
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling set_request_set...');
success := fnd_submit.set_request_set ('SQLAP', 'FNDRSSUB852');--'FNDRSSUB1703');
IF (NOT success)
THEN
RAISE srs_failed;
ELSE
apps.fnd_file.put_line (apps.fnd_file.LOG,
'Calling submit program first time...'
END IF;
-- Step 2 - call submit program for each program in the set
success :=
fnd_submit.submit_program ('SQLAP',
'APXSUIMP',
'STAGE10',
'ALL',
1000,
'N',
'N',
'N',
CHR (0)
IF (NOT success)
THEN
RAISE submitprog_failed;
END IF;
apps.fnd_file.put_line (apps.fnd_file.LOG,
'Calling submit program second time...'
success :=
fnd_submit.submit_program ('SQLAP',
'APXSSIMP',
'STAGE20',
'ALL',
1000,
'N',
'N',
'N',
CHR (0)
IF (NOT success)
THEN
RAISE submitprog_failed;
END IF;
-- Step 3 - call submit_set
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling submit_set...');
req_id := fnd_submit.submit_set (NULL, TRUE);
IF (req_id = 0)
THEN
RAISE submitset_failed;
END IF;
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Finished.');
And in the interface table the record status is rejected and ther is no corresponding record in ap_supplier_int_rejections.
but the supplier is getting created succesfully.
### Steps to Reproduce ###
INSERT INTO ap_suppliers_int
(exclusive_payment_flag,
vendor_interface_id,
vendor_name,
segment1,
vendor_type_lookup_code,-- set_of_books_id,
status
VALUES ('N', --'N',
ap_suppliers_int_s.NEXTVAL,
'TEST_REC4',
4428813,
'VENDOR', --2041,
--rec_spl_site_bank_hdr.set_of_books_id,
'NEW'
INSERT INTO ap_supplier_sites_int
(vendor_site_interface_id,
vendor_interface_id,
vendor_site_code,
address_line1,
city,
state,
zip,
country,
operating_unit_name,
status --exclusive_payment_flag
VALUES (ap_supplier_sites_int_s.NEXTVAL,
-- VENDOR_SITES_INTERFACE_ID
ap_suppliers_int_s.CURRVAL,
-- VENDOR_INTERFACE_ID
'REC_VDR_SITE4',
-- VENDOR_SITE_CODE
'REC_ADDR4',
-- ADDRESS_LINE1,
'REC_CITY4', --CITY
'REC_STATE4', --STATE
3442121,
'US', -- COUNTRY,
' Test US Operating Unit',
'NEW'
);

Hi
I have the same issue with ap supplier sites interface program .. Did your problem got solved..I will be thankfull for any help
Thanks

Request management service issue with SSL Sites

Hi guys,
I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications), our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
sites over 80 port with no SSL works as expected.
I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
this post solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
I've already checked the
good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
says something about don't support path based site collection.
So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'. (Just starting the service Event viewer begis to have a bunch of this errors)
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q3
High Reached maximum number of failed machines based on ping results for this routing group
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q4
Medium Unavailable machines based on ping results: MACHINENAME
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.97 w3wp.exe (0x1184)
0x1C2C SharePoint Foundation
Request Management adc7u
Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
53c2819c-8217-20f3-68c0-cb2f392c388b
Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
I would appreciate some feedback about this. Another posts with similar issues:
http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html
http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316
Regards,

Hi,
According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
It’s a known issue that the request management service could not work with the SSL site.
We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
http://support.microsoft.com/kb/2817429/en-us
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

IE issue with iWeb site

1) Images don't load
2) in IE 8 : HTML email snippet does not show up
How can this be resolved?

Hi Roddy, thanks for your reply. It wasn't just me though; a lot of other people from back also reported the same issue. I was also getting the same thing from behind a wired connection. You can still see and experience the issue yourself if you look here.
I've since 'resolved' the issue by getting a .Mac trial account. A friend helped me move the whole blog over there, where the site works as it is supposed to:
http://web.me.com/eggmeister/India/
Therefore the issue has to be with the hosting. Right now I'm suspecting it might be some obscure configuration issue with the hosting company's server. Maybe something like too low a setting for Apache's 'MAX REQUESTS'. This might cause issues with all the javascript going on in the iWeb pages, loading elements back and forth. I'm in contact with the hosting provider, and will let you know what I find. Might be useful for future reference.

Download to excel on grid generates url with Cross Site Scripting Attack

When we try to download to exell on a grid (8.50.18). The webserver comes back with an automaticly generated url. This url now contains the characters "%0d%0a" (CR/LF
Our firewall/ proyserver detects this string in the url as a Cross Site Scripting Attack (XSS) and fails to shows the excell.
This happens in all our environments (so not dependend on the domain name).
Does anyone know a solution for this problem?

it seems a known bug, starting from 8.50.14 and solved with 8.50.19 (also in 8.51xx)
Unfortunately we are on 8.50.18. Its now a bad timing to update our environment.
It seems that psppr.dll is doing the job but replacing ours with the 8.50.19 one leaves our domains unstartable.
I guess we have to ask our network techies to make a exception rule in our internal network/ firewall to allow it.......
Detlev

"New" IE8 Issues with Apple Site?

As a diehard PC user who just recently purchased an iPod Touch, I am spending a lot more time on the Apple site than in the past. I am having nothing but problems with the main Apple site when I access via IE8. The main page takes forever to load up, then mouse clicks go unnoticed or take forever to respond to. Once I get beyond the Apple home page, things start to improve but a couple of odd errors from time to time. For instance, I was accessing this forum via Firefox, then decided that I wanted to do the same side by side with IE8. Obviously, no issues with any Apple site and Firefox whatsoever. On IE8, when I went to "Login", even after logging out on Firefox, it said that the page didn't exist.
If I didn't know better, I would think that Microsoft and Apple don't get along All kidding aside, do I have to spend the rest of my life accessing Apple's Web site via Firefox, or can I use IE8 like I do for every other site that I access (yes, I have no other problems with any other sites that I access via IE8, except for Apple's).
Thanks.

mlb32704 wrote:
As a diehard PC user .... Obviously, no issues with any Apple site and Firefox whatsoever.
So now you get a feel for how the rest of us live, eh?
I understand how you feel, but Apple clearly doesn't give any consideration to all the hacks required to make Internet Explorer behave. They just code to the web standards that were published about 10 years ago. Having done a moderate amount of web development I can tell you that Firefox and Safari render and behave virtually identically. All version of Internet Explorer require some sort of hacking to make work. I have three separate CSS files I include with my web sites (ie6.css, ie7.css, and ie8.css) that contain distinct sets of hacks to make pages that look perfect in Safari and Firefox look somewhat decent in IE. You would think that the number of hacks would decrease as the IE version number increases, wouldn't you? Sorry. Each version has its own distinct bugs. If there is any web site in the world that shouldn't have to deal with that, it is apple.com. If you don't want to use Firefox, try Safari for Windows.

Compile issues with cross-mipsel-linux-gnu-gcc

I'm trying to set up some sort of cross-compilation environment in order to compile software for a MIPS device.
I installed cross-mipsel-linux-gnu-gcc (4.7.2-1) along with cross-mipsel-linux-gnu-binutils (2.22-1). Then I tried to compile a simple Hello World, and the result was as follows:
[mcmlxxxvi@deepspace1 hello-world]$ cat hello.c
#include <stdio.h>
int main()
printf("Hello World!\n");
return 0;
[mcmlxxxvi@deepspace1 hello-world]$ mipsel-linux-gnu-gcc hello.c
hello.c:1:19: fatal error: stdio.h: No such file or directory
compilation terminated.
[mcmlxxxvi@deepspace1 hello-world]$ mipsel-linux-gnu-gcc hello.c -I/usr/include
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find crt1.o: No such file or directory
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find crti.o: No such file or directory
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find crtbegin.o: No such file or directory
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find -lgcc
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find -lc
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find -lgcc
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find crtend.o: No such file or directory
/usr/lib/cross-mipsel-linux-gnu/lib/gcc/mipsel-linux-gnu/4.7.2/../../../../mipsel-linux-gnu/bin/ld: cannot find crtn.o: No such file or directory
collect2: error: ld returned 1 exit status
I know I generally need a compatible glibc build, but a) there isn't a package pre-built for MIPS as the compiler, and b) there is no mention of glibc in either gcc or binutils' AUR pages. So I thought that these two packages were somehow supposed to be sufficient - and they aren't.
I found a tutorial on setting up cross-compilation for MIPS and I tried to build libc, but as I used the gcc and bunutils AUR pacakges instead of going straight for the source, and, probably, as the tutorial is geared towards slightly older versions, I did not succeed. configure produced only a config.log and I wasn't able to make.
So, how are cross-mipsel-linux-gnu-gcc and cross-mipsel-linux-gnu-binutils supposed to be used? How do I need to set up my environment in order to be able to invoke the MIPS gcc the same way as my regular gcc?
Thanks in advance.

The problem is gone after going to Kernel 39 in testing.

Issues with cross-site CAS redirect of OWA users

Similar Messages

Maybe you are looking for