Issues with cs5.0.03- cannot use CUDA, cannot find cuda support text file

Hi,
I am working with a big project and recently upgraded my video card to a GTX 570.
I cannot enable the CUDA engine in project settings, it is completely greyed out.. Doing some searches, everyone seems to point at a cuda support text file...
Kicker 2-
I go to the Root directory of where adobe is installed, see the CS5 folder- with NO Cuda supported list.... Do a complete search of the whole machine, nothing.
Updated adobe, no change
Most up to date video drivers from Nvidia are already installed.
Went through Nvidia control panel to manually set it to render using the GPU- no change...
I am at a loss here, any ideas or help would be much appreciated.

Hello,
Thank you for your time-
Ok, I remoted back into the machine and took a closer look again, Somehow half of the CS5 suite is on the C drive, and the other is on the storage- CS5 primarly. How I personally do not know, but from there was able to locate the needed folders, and created the text file. All is well now, I just told them to finish the project first, before we move it over where it belongs.
Joe Bloe P. Thank you very much.

Similar Messages

Compatibility issues with CS5.5 and Maverick 10.9

I'd like to know if there are any compatibility issues with CS5.5 and Maverick 10.9 before I upgrade from 10.6.8.

To be honest, I use the CS5 Premium Creative Suite and have had to upgrade all my app's to Mavericks because I have a new iMac, the other one just died.
I used the 'Time Machine' to backup and to transfer all the files, the Mac apps almost transferred 100% but not all successfully, especially iDVD, it was probably something that I did not click in the 'Time Machine preferences'.
If I had the choice, upgrade to 'Mountain Lion, I would revert back to Mountain Lion but not got the discs, I find Mavericks very clunky and slow and causing lots of issues with my Adobe applications.
So if it is not too late, I would wait a few months before upgrading to Mavericks.
Hope this info' has helped.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

Issue with PR conversion to PO using ME59 withqty of similar line items

Hi All,
I'm having an issue with PR conversion to PO using ME59
I have a PR with the following line items with all same details except quantity
ex 1
Mat Qty Unit Plant   St Loc
M1   1    EA   P1      S1
M1   29   EA   P1      S1
The PR brings in the Unit automatically
EA is Base Unit Of Measure -Material Master
BT is Order Unit           -Material Master
Conversion
30 EA = 1BT
When i convert this PR to PO using ME59N then i see 2 lines items
M1   1   BT
M2   1   BT
Its doubling the qty (2 BT = 60 EA)
ex 2
Mat Qty Unit Plant   St Loc
M1   1    EA   P1      S1
M1   2    EA   P1      S1
M1   27   EA   P1      S1
The PR brings in the Unit automatically
EA is Base Unit Of Measure -Material Master
BT is Order Unit           -Material Master
Conversion
30 EA = 1BT
When i convert this PR to PO using ME59N then i see 2 lines items
M1   1   BT
M1   1   BT
M1   1   BT
Its 3 times no
PR Qty = 30 EA
PO qty = 3 BT = 90 EA
I guess during conversion to PO
It sees PR Line item 1 and looks for another line items with similar fields ( in our case it sees line 2 in ex 1 and 2 and 3 in ex 2)
i adds the qty 1 and 29 in ex1 and converts the total 30 each to 1 BT and when it moves to 2 line it see item1 and again creates 1BT but the line item 2 was already considered and it should be ignored
Similarly if you see ex2 then it creates 3 limes with 1 BT each
Let me know how to resolve this issue
Thanks

As for std SAP ME59N - make sure there is not rounding value is activated in the Material master as well as info record
If this is not the case than check any custom code is activated for ME59N
becuase generally in many compnay when they use ME59n they don't want the same material from diff PR to create the diff line item in the PO so using the custom logic in the user exist they trick the code
it might be the case for you where you have issue.

I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....

What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

HT1766 i need to back up my iphone4s but now i cannot use becauce cannot functionwhat i do

i need to back up my iphone4s but now i cannot use becauce cannot functionwhat i do

It will back up to iCloud in sleep mode?
So I just need to turn the do not disturb on? -- sorry for the silly questions

Cannot use the Send to Soundtrack Pro Audio File Command

I cannot use the Send to Soundtrack Pro Audio File Command, only the Multitrack and it's starting to really get on my nerves. It is unhiglighted. If I unlink the clip and select only half of the audio, the option re-appears. I have no idea what is wrong.

As an audio file, you can only send one clip at a time. This is a feature, not a bug. See the book for more information.
Russ

Issue with SharePoint foundation 2010 to use Claims Based Auth with Certificate authentication method with ADFS 2.0

I would love some help with this issue. I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0 I have a test account set up with lab.acme.com to use the ACS.
When I log into my site using Windows Auth, everything is great. However when I log in and select my ACS token issuer, I get sent, to the logon page of the ADFS, after selected the ADFS method. My browser prompt me which Certificate identity I want
to use to log in and after 3-5 second
and return me the logon page with error message “Authentication failed”
I base my setup on the technet article
http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
I validated than all my certificate are valid and able to retrieve the crl
I got in eventlog id 300
The Federation Service failed to issue a token as a result of an error during processing of the WS-Trust request.
Request type: http://schemas.xmlsoap.org/ws/2005/02/trust/RST/Issue
Additional Data
Exception details:
Microsoft.IdentityModel.SecurityTokenService.FailedAuthenticationException: MSIS3019: Authentication failed. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
ID4070: The X.509 certificate 'CN=Me, OU=People, O=Acme., C=COM' chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed
correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
--- End of inner exception stack trace ---
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.BeginGetScope(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.BeginIssue(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.DispatchRequestAsyncResult..ctor(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginDispatchRequest(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.ProcessCoreAsyncResult..ctor(WSTrustServiceContract contract, DispatchContext dispatchContext, MessageVersion messageVersion, WSTrustResponseSerializer responseSerializer, WSTrustSerializationContext
serializationContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginProcessCore(Message requestMessage, WSTrustRequestSerializer requestSerializer, WSTrustResponseSerializer responseSerializer, String requestAction, String responseAction, String
trustNamespace, AsyncCallback callback, Object state)
System.IdentityModel.Tokens.SecurityTokenValidationException: ID4070: The X.509 certificate 'CN=Me, OU=People, O=acme., C=com' chain building
failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
thx
Stef71

This is perfectly correct on my case I was not adding the root properly you must add the CA and the ADFS as well, which is twice you can see below my results.
on my case was :
PS C:\Users\administrator.domain> $root = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ad0001.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "domain.ad0001" -Certificate $root
Certificate : [Subject]
CN=domain.AD0001CA, DC=domain, DC=com
[Issuer]
CN=domain.AD0001CA, DC=portal, DC=com
[Serial Number]
blablabla
[Not Before]
22/07/2014 11:32:05
[Not After]
22/07/2024 11:42:00
[Thumbprint]
blablabla
Name : domain.ad0001
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : domain.ad0001
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17164
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.domain> $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ADFS_Signing.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "Token Signing Cert" -Certificate $cert
Certificate : [Subject]
CN=ADFS Signing - adfs.domain
[Issuer]
CN=ADFS Signing - adfs.domain
[Serial Number]
blablabla
[Not Before]
23/07/2014 07:14:03
[Not After]
23/07/2015 07:14:03
[Thumbprint]
blablabla
Name : Token Signing Cert
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : Token Signing Cert
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17184
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.PORTAL>

Windows 7 Firewire Issues with CS5 and ADVC-700

I've got a Windows 7, 64 bit system with CS 5. In dubbing out for playback, I route a firewire cable from the PC to an Canopus/Grass Valley ADVC-700. Both units are less than a year old and are having issues with "black outs" during the dub out process. I've read different things about Windows 7 having issues with firewire drivers. After speaking to someone with Adobe, I've changed my firewire driver to Legacy. That hasn't helped.
The ADVC-700 has s-video out running to preview monitor and BNC out/XLR audio running to my playback system for ingest. When the video goes to black (usually for a 1/2 second), the audio drops out with it.
I've reset the settings on the ADVC-700 with no luck.
Any suggestions on a fix or something else to try?

I did test with a JVC GY-HD200U and there weren't any performance issues which led me back to the PC or other on the PC.
The system is running Windows 7, 64 bit with CS5 Production Premium following an upgrade from the CS4 version.
I've got 12 GB of Ram, (2) Intel Xeon Quad Core E5560 -2.8 GHZ processoCrs.
(1) 500GB SATA2 hard drive, 7200 RPM, 32 MC (System Drive)
(3) 1 TB SATA2 Hard drives, 7200 RPM, 32 MC (3 TB, RAID0 Storage Drive)
Nvidia GeForce 9800GT graphics Card
Supermicro X8DAi motherboard, Intel 5520 Chipset, 2-PCIe X16, 1 PCIe x4, 3-PCI, 10-USB2 ports, 2-pro/1000 NIC, 8-channel HD audio, 6 SATA ports, RAID 0/1/5/10
I've got the legacy drivers for the firewire card. I've checked to make sure all of the power save options are off along with all screen saver options. I've cleaned my Adobe Cache out, deleted my Adobe Preferences, went from the 4pin/6pin cable to a 6pin/6pin cable to feed the ADVC-700 from the PC, reset the ADVC 700 back to factory specs...all of this with no luck.
The problem seems to be worse since the move from CS4 to CS5 but it's hard to tell.
I've also hooked up an older ADVC-500 unit with the same output results.
I think I noted in the first post that this is happening on two indentical systems with the same cabling and programs and the same ADVC-700 boxes.
I've been told by Adobe to clean my C; drive and reload the OS and Adobe CS5 as I should have done that when I upgraded instead of just upgrading the system from CS4 to CS5 using the discs. I haven't done this yet as I have to budget time/workflow to accomodate.

Color Profile issues with CS5

I´ve been having some issues with the color profiles since I´ve installed the CS5 on my laptop (Windows 7 ultimate).
To describe what I mean please see the images:
Every time I open Photoshop or Illustrator this message apppears:
so I hit ok, but I´m not sure if this affect the artworks that will be printed, I use the CMYK Mode but the colors does not match very well.
Hope you can help me
Thanks in advance,
Diana.

You have some serious reading up on color management to do... I strongly suggest you sift through the Illustrator/InDesign/Photoshop forums and the web in general. Short version: Using RGB profiles makes no sense whatsoever if you are working in CMYK but in reverse working in CMYK does not make sense if you are only printing at home/ displaying graphics on your own computer. Anyway, this is an infinitely complex topic, so realyl, do some reading and then ask more specific questions in the program-centric forums...
Mylenium

Issues with CS5 and video quality

Hi there,
New to this forum so I would just like to say hello first of all
Over the last 4 years or so I have been using CS3 even though I tried to upgrade to CS5 some time back when it first came out. I had a few codec issues and slow rendering times on my old system so I returned to CS3 and that is where I have been until I recieved my new system a couple of weeks back. This is the first project where I have come to use it in anger and the issue I have is with the quality of the video in the output window and this is reflected also in the rendered video file. Had a look at lots of settings and nothing seems to be screaming out at me. As you can see from the image below the text is bearly readable. I am working in PAL 4.3 aspect ratio and the white printer paper moves up the screen with a dot matrix noise in the background. However, the text is never really very clear when its moving or stationary. On my old system with CS3 it was 100% better. Can anybody make any suggestions?
Thanks in advance
Andy

In the info that Jim suggested, be sure to tell us all about the Image (assume that you have animated a Still Image with Keyframes?) that you are using - pixel x pixel dimension, format, everything you can, please.
Good luck,
Hunt

"Interactive Photomerge issue with CS5..."

          Hello,
                I've been attempting a 'merge with some photo's that I took over the weekend in New York... Some of them didn't have the apparent 40% overlap that's needed for a good 'Auto merge so I've been attempting to use the "Interactive Merge". When I was using CS4 I never had any problems with it doing its job... But I've found that with its use under CS5, that it doesn't just merge the images... "It actually drops the Scaling down by almost 50% each and every time I attempt using it.   If I start out with a "Height" of say 20inches, the merge will drop down to the 10inch +- area... If I attempt to use the "Merged" results of that attempt and merge it with another frame... the Height will then drop down to the 4 - 5inch range.
               Is this a known bug with the use of the "Interactive Merge" with CS5..? Because I'm at a loss as to why this would be happening. Is this perhaps "Why" you Adobe boys removed the "Interactive Merge" from Photomerge in the first place..?
               With all the hype that I've heard surrounding CS5's Photomerging capabilities its kind of, how shall I say it,... maybe, Drop The Ball'ish... to be polite about it. Photomerge is and Excellent part of Photoshop since its inception. But with the release of CS5 I was expecting actual Advances in the Photomerge process, not removal's of some of its features, such as the case of the Interactive Merge.   I was actually hoping that once CS5 had been released that the Interactive Merge would have actually been advanced itself... One of, actually, My Only grip with how its worked in the past... is with its "Zoom, or Magnification" limits... Its never made any sense to me that a Panoramic Stitching program that would be working on "Several" images at a time, some already merged, others needing to be adding to the project, would actually have a Limit on the Magnification aspect of the UI panel that your attempting to work on. Unless your working on only 2 frames at a time, it becomes useless with the more frames you have already merged...
          "Well, I believe that I was as polite about the, shall we say, lack of foresight, with Photomerge's advances... However, as for me, one of the main things I use Photoshop for, is my Photography believe it or not... and Panoramic's are what I'm usually working on."
.... just hoping for a little help is all...

When you get a condition where it's not accepting a keystroke, check something:
Look carefully to see if some of the letters in the menus in the Photoshop main window have been given underlines. If so, this may indicate that you've invoked the menu key introducer (Alt key), and Photoshop is waiting for a menu key.
There is some subtle difference in the way Photoshop handles the Alt key combination with CS5 vs. earlier versions, and because of the way some folks press the keys on their keyboard they end up invoking it (which is easy to do: Just hit the Alt key once and you're there).
There have been some workarounds where folks have created software/scripts that translate keystrokes to lessen the problem. There was a thread on this forum active for a good part of last year which provided some download links...
http://forums.adobe.com/thread/670988?displayFullThread=true
-Noel

Issue with CS5 shortcuts

I am running Photoshop CS5 on my Vostro 230 desktop and have had a lot of issues with my shortcuts not popping up menus and switching tools.
The ones I have had the most problems with is switching the brush tool (B), gradient tool/fillbucket toggling (G), brush menu (F5) and opening history (F9). The brush and gradients won't switch unless I click on the canvas which usually means I have to undo then go on to what I was doing. The brush menu and history just won't come out at all unless I do it manually.
Is this a bug that is fixable? I switched over from CS3 and never had this issue and it is really interrupting my workflow.
Any input is appreciated. Thanks!

When you get a condition where it's not accepting a keystroke, check something:
Look carefully to see if some of the letters in the menus in the Photoshop main window have been given underlines. If so, this may indicate that you've invoked the menu key introducer (Alt key), and Photoshop is waiting for a menu key.
There is some subtle difference in the way Photoshop handles the Alt key combination with CS5 vs. earlier versions, and because of the way some folks press the keys on their keyboard they end up invoking it (which is easy to do: Just hit the Alt key once and you're there).
There have been some workarounds where folks have created software/scripts that translate keystrokes to lessen the problem. There was a thread on this forum active for a good part of last year which provided some download links...
http://forums.adobe.com/thread/670988?displayFullThread=true
-Noel

Issues with CS5 Illustrator .ai files

I just recently purchased CS5 Illustrator. After creating the file as an .ai file, I am having an issue with reopening the file. I get an error. Any suggestions?

Post in the general forum… Your question is at a very small audience here in the scripting forum… Thats all of us… not enough to throw a party…

Sateillite A200-1A9: Issue with sending/receiving E-mail using Windows Mail

Using Windows mail I have to close/open the programme to be able to send mails, they get stuck in the Outbox. By closing and reopening the programme the mail gets sent. Also the Blue figure 1 in brackets showning 1 unread mail in the Outbox is there all the time although there is no mails read or unread in the Outbox
Not a server problem as all mails are going/receiving fine on my desktop.
Pressing send and receive button does not help. although some of the time it will receive mails when pressing send/receive but will not send them
I do have Norton Internet security 2007 and am getting fed up with the continuing problems that this seems to cause over the period 2004-7.
Is there an issue with the Windows mail programme running with Vista that is known

I think I have found a solution
Please check this:
Windows Mail will not Send or Receive mails
http://support.toshiba-tro.de/kb0/TSB7701X30005R01.htm
It seems that the update of Software Desktop SMS to the newest version will help to sort out this problem.

Issues with cs5.0.03- cannot use CUDA, cannot find cuda support text file

Similar Messages

Maybe you are looking for