Issues with CWLMS 3.2 RME 4.3.1 cannot fetch vlan.dat off a VSS and 4510.

Hi,
I am having a major headache with RME collecting the vlan.dat from a VSS and 4510, the device and credentials work fine, however when archiving the config i get partial success due to vlan failing. You can see in the IC_Services log that it attempts to TFTP the .dat file off which it fails with, i believe vlan fetch is only supported by SSH or telnet
when you do a CDA test both devices pass on everything..

managed to log on and please see below, tftp on one device works fine but from the 4510 or vss still fails
GRA_CHUB_CR_01#copy cat4000_flash: tftp:
Source filename []? vlan.dat
Address or name of remote host []? 172.20.220.10
Destination filename [vlan.dat]?
%Error opening tftp://172.20.220.10/vlan.dat (Timed out)
GRA_CHUB_CR_01#
DAR_R002_AS_01#
DAR_R002_AS_01#copy flash:vlan.dat tftp:
Address or name of remote host []? 172.20.220.10
Destination filename [vlan.dat]?
616 bytes copied in 0.009 secs (68444 bytes/sec)
DAR_R002_AS_01#

Similar Messages

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

Hi BC,
I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
This is causing us mayhem.
We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
Jo

Hi there,
The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

TS2756 I have issue with Internet tethering on my iPad 4 that cannot be filed . I try many time and I update to latest vergin 6.1.2

I have issue with Internet tethering on my iPad 4 that cannot be filed . I try many time and I update to latest vergin 6.1.2

I'm always when I enter the detailes for user name and password automatically cleared

Is anyone else having an issue with Muse 2014.2 Freezing/Crashing at launch? It worked perfectly up until tonight and nothing has changed on my computer. I'm running windows 8.1. I've tried logging in and out of CC, I've uninstalled and reinstalled Muse t

Is anyone else having an issue with Muse 2014.2 Freezing/Crashing at launch? It worked perfectly up until tonight and nothing has changed on my computer. I'm running windows 8.1. I've tried logging in and out of CC, I've uninstalled and reinstalled Muse twice with no change. Please advise. Thanks!

Are you getting any error when Muse crashes? what's the one function it lets you do before it freezes?

Having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

Hi
in this scenarion control is not going inside the condition
if (vo.getRowCount() == 0) and therefore VO is not getting initialized
why u are counting the row of VO to initialize the VO ,if possible pls remove this condition check ,problem will be solved .pls let me know in case of any issues.
thanx
Pratap

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

I am a new user with i pad, I have an i phone with the app account tracker on it, I cannot get the information off my phone onto my i pad why?

I am a new user with i pad, I have an i phone with the app account tracker on it, I cannot get the information off my phone onto my i pad why?

iTunes: About iOS backups - Support - Apple

Issues with CWLMS 3.2 Install Server 2008

Hi,
I am trying to install CWLMS 3.2 on Server 2008 SP2 - I have installed succesfully but when i try and login it asks for username and password which i fill out correctly and then just hangs and does nothing, it seems to be an issue with port 443 or redirection.
Please help
Thanks
Rich

Sounds like CSCtb17186 http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb17186
that Joe mentioned in https://supportforums.cisco.com/message/676256#676256

Issues with using my iPhoto library on my external hard drive. Very slow to open and pictures disappear in thumbnail view.

I have recently transferred my iPhoto Library to my external hard drive (WD MyBook Live) and have some questions. Since I have done this and used the "alt + option" to select it as my default library I have been having some issues. When using the library on the external drive as my default drive it takes a very long time to load compared to when it was on my macbook's hard drive. Is this normal? Also, once it does load the thumbnails are only viewable when scrolling quickly through the photos and they are very blurry. However, if I were to select one randomly (because of this problem I have no way of knowing which one I'm selecting) it brings it up in the edit view and it is a crystal clear picture.
Is there a way to fix these issues? I'd love to be able to use the iPhoto Library off the external drive to free up space on my macbook but if it isn't going to work as streamlined as it would on my macbook hard drive. I have not yet deleted the original iPhoto Library from my macbook because I did not want to do so until I knew the new iPhoto library on the external drive was working properly. Does this make a difference?
Please help!

The problem lies with occasional dropouts that can corrupt the library's database files if they are being written to as the time of dropout. It's the nature of wireless networks. If you have a very strong signal throughout and are willing to take a chance then go for it.
But as for the speed, it must be iPhoto 11 and it's complexity causing the slowness. I had tried using a library on an EHD connected to my iMac from my laptop wirelessly with iPhoto 7 or 8 and it was pretty fast. I think it was 7 before faces and places came into being.
Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to improve wireless performance, etc.
OT

Lockbox Issue with payment on exact day as Cash Discount Days 1 Due Date

Dear Gurus
We are running into an issue in as much as when we receive a payment against our Lockbox on the exact day as the Cash Discount Days 1 due date the system posts this as an on account posting as opposed to applying the cash against the open receivable and posting the difference to the Cash Discount Account.
E.g. Invoice 10000 Payment term 34 days 2% Net 35. I created the AR invoice today with invoice date and posting date of Oct 9, 2009 and posted the same. Received payment $ 9800 on Lockbox file today Nov 12 using the BAI2 format Lockbox file and found that the system did not even show the invoice # on the Lockbox reports but it recognized the customer based on the MICR # and posted an on account payment. It gave the error" F5 263 Difference too large for Clearing"
The users have prior complained that this situation arises in F-28 as well where they would have to force the discount instead of the system recognizing the same if cash was being applied on the same date as the Cash discount Days 1 due date.
Any help in this regards will be geratly appreciated and points awarded.
Regards
Satpal Narang

Hi Satpal,
Please check the net due date of the document which you are trying to do the payment. As it is critical information to calculate the cash discount.
I hope this helps.
Regards
Ravinagh Boni

Aperture 3.2.1 still issues with sorting images in albums, after making adjustments, cannot use arrow keys to go to next image. straightening tool auto turns image prior to straightening inconsistantly

Have updated aperture to 3.2.1, still having some issues during editing images.
1. Basic item is sorting images does not happen correctly, move some images in file, they don't move correctly, after trying to move several, then they almost randomly move around.
2. Straightening tool will automatically tilt images as soon as you touch the tool, turns them on about a 30 degree angle clockwise.
3. Arrows on right side of keyboard used to move images in browser from the editing position, they move them if no editing is done, once you edit an image, cannot move to the next image using the arrow keys.
tks, gmoney in ladner

Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim

HT3702 Please refund confirmation issue with Creation TM for iPhone, this app for iPad what app I've already bought and paid for, please check the amount of 14.99 €, Thx, Jordan Sent from cockney rebel iPad.

Please, stopped purchase ...

No one here can do anything.
We are all itunes users just like you.
Click Contact Us at the bottom of the page to contact Apple.

I have a rogue software issue with mozilla firefox every time i down load it how can I permently delete it and ensure there is no recurrence ?

every time i download mozilla firefox 3.6
get an unwanted pop up spam page that is
apparently impossible to delete unless i delete
firefox and use a totally different browser I have windows
XP and Hewlett Packard /Compaq hardware

FOUND A SOLUTION ! STOPZILLA ANTISPYWARE FOR $20 REMOVED IT STRAIGHT AWAY CHEERS MIKE PARER.

HT5858 In settings on my iphone 4 manage storage, anything to do with icloud, under accounts-icloud,gmail,add account,fetch new data is in gray and i cant access anything. Trying to upgrade to iso 7. Frustrated

Im not good with any of this so bare with me please. On my iphone 4 anything to do with ICloud to manage storage or under Accounts(icloud,gmail,add account,ferch neew data are all in gray and cant access. Even just under settings, icloud is in gray. Im trying to download ISO7. My phone has gotten exstreamly slow. So frustrated !!

Do you have any restrictions set in Settings > General > Restrictions?

Issues with CWLMS 3.2 RME 4.3.1 cannot fetch vlan.dat off a VSS and 4510.

Similar Messages

Maybe you are looking for