Issues with danish characters and sync

I am using a Nokia 5800, Nokia Ovi Suite 1.1 and synchronize through a cable from phone to PC.
I am using the Address Book from Outlook Express to synchonize between my Nokia phone and my PC. However, any special danish characters (æ, ø and å) are not correctly transferred from the phone to the PC, though the other way round does not cause any problems.
This is an issue when I set it up to synchronize both ways, as everytime I do this, all people in my Phone with either æ, ø or å in their name come in to my Outlook list as duplicates where the above-mentioned letters are replaced by some rubbish.
I assumed this was some language-settings but everywhere I can see my PC is set for danish and so is my phone.
What can I do to prevent this problem? Is there anywhere specific I have to change / modify some setting?

Hi richard116,
The BlackBerry Desktop Software requires a one time connection to the internet when configuring synchronization. Its possible this could be being blocked due to a firewall or anti-virus software. The following article should help you diagnose the cause and then resolve the issue so you can setup synchronization. http://bbry.lv/mfgghx
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

Issue with escaping characters and php

Greetings,
We are working on a web page using php and Oracle. We have troubles dealing with the diferent escaping characters when inserting/retrieving data (magic quotes is on but adding the backslash doesn't help :( ).
We would like to know the correct way of dealing with those characters ( ' " / /n ...).
Thank you in advance,
Sincerely,
Oriol Nonell

Do NOT use addslashes/stripslashes to escape your queries. I use this function to do the escaping:
function escapeSQL($string, $wildcard=false)
$result = str_replace("'","''",$string);
if ($wildcard == true) $result = str_replace("%","%%",$result);
return $result;
It basically replaces ' with ''.
If you set $wildcard to false, then '%' is considered to be an actual '%' (for 'like' expressions). If you set it to true, a % is escaped to %% too.

Having issues with purchased playlist and syncing

So, I'm really particular with the organization and appearance of all the music on my iPod (I'm someone that goes into the artist tab when looking for something to listen to, so the path is always artist > albums > songs), so often times after I purchase something, I'll edit the song or album titles to look nicer (so it doesn't say 'Deluxe Edition'), or to organized things into the specific albums I want (so there isn't a song missing from an album that I purchased when it was a 'single').
I've started syncing my iPod to update any songs I want to add manually (as in, ones that I've added from places other than the iTunes Store and therefore wouldn't just appear on my iPod) because iTunes stopped letting me click and drag songs I wanted to add for whatever reason. Anyway, I had to delete my Purchased Playlist from my iTunes library because when I synced my iPod, it would change all the song and album titles back to the original ones they had before I edited them, which would then change them on my iPod, and instead of having everything in neat, well organized places, I'd end up with like three different versions of the same album with the songs split up because of little differences in the labeling, and that drives me crazy.
But now, every single time I purchase something, the Purchase playlist reappears on my playlists on iTunes, and even though it just lists the thing I just bought (as opposed to my entire purchasing history), it still changes all the files I've ever purchased back to the original names and messes things up. And when it's over 200 songs, I'm really not in the mood to go back and manually edit every single song info every single time so that my iPod is organized when I sync it. And the thing is, when I right click and go to 'get info', the edits I made are still there, and I don't even have to erase or change things, it will just automatically fix itself, but only after I right click and go to 'get info', which is still a pain in the butt.
So, is there any way to either stop iTunes from changing all the info back, or to better yet, just not create a Purchased Playlist when I buy songs/albums?

The list of AirPrint supported printers is here:
AirPrint Basics
Netgear Genie is not on this supported list so it is probably best to contact Netgear.

Issue with French characters and Variables combined.

Using Captivate 4 and publishing to SWF, I discovered the behaviour shown below.
You can see a text caption
The text of the first line in Captivate is 'Modifier les paramètres Word - $$v_ScoreParam$$/10'
When published the è is changed into a Chinese character.
Is this a known issue? Or am I doing something wrong?
Thanks for any clues.

Hello,
This is a known issue in Captivate 4 (there are several threads in this forum about it), and sorry, it has not been solved in CP4 but is no issue in CP5 (doesn't help you of course).
I had quite a lot of problems with this. The only workaround is putting this variable in a separate Text Caption and try to put it in place in the other Text Caption. Personally I avoided using those variables when expecting combination characters (like é, à ü...).
Lilybiri

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Web Logic 10.3 upgrade causes issues with escaped characters in JSP.

We recently upgraded our application servers from Weblogic 9.2 to Weblogic 10.3 and we are having an issue with escaped characters in a JSP code. Here is an example of what we are seeing:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
This code works in Weblogic 9.2. In Weblogic 10.3 we have to make the following changes:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
Thanks, Tom

Hi:
I have resolved the issue with the following in the jspx page.
Put an
<jsp:scriptlet>
response.setContentType(“text/html; charset=UTF-8”);
</jsp:scriptlet>
Inside the <f:view> on the jspx file.
Please refer the link http://www.oracle.com/global/il/support/tip/nlss11061.html for more details. It is helpful.
Thanks & Regards
Sridhar Doki

Problems with danish characters in email

Hi,
I have created a mailform with danish characters. I have tried to use the following configuration:
charset=iso-8859-1
But when i save the mailform, CRM transforms it to:
charset=utf-8
And before the header line it inserts:
<?xml version="1.0" encoding="utf-8"?>
This is a problem because some of oure customers email clients, can't read this and garbles the danish special characters. The result is non readable emails.
How do i fix this?
Kind Regards
Michael
Edited by: Michael Knudsen on Oct 16, 2008 11:21 AM

Hi Michael,
pls create an OSS for this to allow SAP development to check this for you.
regards
martin

Issues with Car Bluetooth and the 9630

Hey guys,
Over at the crackberry forums there are many people reporting issues with the tour and car bluetooth. Basically, for people that are syncing the tour with the bluetooth in their cars, people can barely hear them. We can hear everyone just fine, but when talking the person on the other end reports that our voice is very low. This is happening on VZW, Sprint, Bell and Telus, which leads me to belive this is an issue with the OS itself. The link to the discussion at crackberry is http://forums.crackberry.com/f141/car-bluetooth-tour-issue-they-can-t-hear-me-well-267206/ I'm hoping someone from RIM cam comment on this or provide some help. This is a VERY frustrating issue to Tour owners especially with so many places having "hands free" laws.
Thanks!

Greetings from Charleston!
I was using a Verizon 8830 World Edition until I upgraded to the Verizon Blackberry Tour on launch day July 12. I never had any Bluetooth issues before and I'm not having any now. As a matter of fact, I would say the quality is a tad better. My volume is controlled by my car when the Blackberry is connected via Bluetooth and I've actually had to turn it down sometimes because it has been so loud. I drive a 2007 Toyota Landcruiser. I suspect it has less to do with the Blackberry than it does with the car. Perhaps there's a Bluetooth software/firmware update necessary for some of your vehicles?
All in all, I love this new Blackberry!!
Cheers!

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Issues with danish characters and sync

Similar Messages

Maybe you are looking for