Issues With Deleting Printer Drivers

I'm currently using an Epson Stylus Photo 1400, and when I went to Epson.com to try and download the software that checks the ink levels, does diagnostics, etc, I accidently downloaded their EasyPrint which basically strips down the settings available from the print windows in applications to make it "easier" to print. As a serious photographer, I need to be able to alter all of the settings I'm used to, such as print quality, color settings, etc, which are not accessible now that EasyPrint is installed... I've tried installing the printer's normal drivers again, deleting it from my printer list and adding it back (and selecting the correct driver), but I still cannot access the more advanced controls. I tried looking in the Library>Printers folder, but there's only an icon for my printer's queue. Any ideas as to how I can uninstall this pesky software?

I'm not too familiar with Epson printers, but I know that HP printers have to be uninstalled using a special HP uninstaller. Perhaps Epson has something similar. You might see if the support section of the Epson website can tell you how to completely uninstall what you have now so you can do a fresh install of what you really need.
Good luck!

Similar Messages

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Find deleted printer drivers

Had a bit of a problem with my pc ... a software glitch , meaning i had to re install Leopard. In doing this , as i did not have room on my hard drive , i deleted Printer Drivers , Additional fonts and maybe something else. How can i get the Printer Drivers [2] back without having to reinstall them both again?

If you don't have enough room then try to install only the printer driver family you need instead of installing all of the printer drivers. If that's not going to work then you have to little free space on your hard drive which is a potential problem. You will need to delete files in your Home folder you no longer need or move them to an external hard drive. Long-term: replace the hard drive with a bigger one or start storing your files on external media.

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Urgent : Issue with deleting Line Item in ME22N

Hi all,
I have an issue with deleting line item in ME22N for some Purchase Orders.
When I try to delete the line item, a warning message comes up saying that " Quantity invoiced or delivered is less than the quantity ordered". And I am unable to proceed further and save the PO. Could anyone let me know as why this is happening?
Thanks in advance.
Regards,
Adapala.

Hi
there is no need of group key.
if any of these 3 are done, payment will be done in total.
1.In setup all company codes for payment transactions , DESELECT seperate payment per business area check box
2.In setup paying company codes for payment transactions , DESELECT seperate payment for each reference check box.
3.In the Vendor Master got to payment transactions tab and below the payment method , there will be individual payment checkbox. DESELECT that check box.
try again with first two with DESELECT options , i will check out with DME.
Cheers

Can SCCM delete print drivers?

Can SCCM remove print drivers from a deployed PC?
I may be in the wrong community. If so, please point me in the correct direction.
We have roughly 400 printers installed on Server 2012 R2. We are implementing a new Windows print solution due to our 2008 R2 cluster's erratic behavior.
We created a one node development box that is in place for now.
When we switched from the cluster to a stand alone solution, we had about 150 drivers that became corrupted and would not print until we performed a number of steps to remove the "broken" driver package and replace the driver of the same type from
our driver store by hand.
1. Select affected printer, go to local driver store to note location of the print driver files
2, Delete existing printer
3. Stop spooler
4. Delete driver files
5. Restart print spooler
6. Run GPUPDATE /FORCE to reapply the printer with a working driver.
Before we go live with our new solution we would like to remove the driver and package using SCCM if possible hoping to avoid the same situation.
Our current deployment method is using Security Groups (memberships) and separate GPOs to push the assigned printer to the proper Windows 7 32 bit OS PCs.
Any ideas?

The simple answer is If you can script those task then CM07 and deploy it out to either computers and/or user.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

New HH3 - Issues with Kodak Printer and iPhone 3GS

Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...

For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

Issues with Form printing using a 3rd party software!!!!!!!!!!!!!!!11

Hi All,
We are printing our month end AR statements using Xerox DP100 printers. We are using a SAP Script as the layout form. Everything works perfectly alright when a direct print is issued to the printer. But the scenario here is the statements are sent to a 3rd party software so that the statements can be saved in their repository and made available to be viewed and printed whenever necessary. Now the issue is when this 3rd Party Software(TPS) reads the SAP generated PCL from its report store on the unix host and generates a PDF File that it presents to the web client user for (re)printing via his/her PC it appears that the TPS or Websphere or Adobe is performing a font substituion - replacing the Univers font(used in R/3) which is not loaded on the unix host with a different font(with different sizing and/or behavior).
As a result the horizontal and vertical positioning generated by SAP(which is correct for the Univers font) is 'wrong' for the substituted font. The fixed size fields print OK but gradually move to the right. The varying size amount columns do not align correctly and fall off the right side of the page.
Can anyone give me pointers on what can be done to arrest this error.
Does the font need to be loaded on the unix host or the font used in the form be changed?
Regards,
Karthik

Karthik,
Sap script behaves differently for different printers. You will have to change margins when you change your printer/software accordingly.

Issue with remote printing

Hello
we have an issue with printing from redirected printer
on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
on the local printer it was set to letter but on the remote the redirected printer is set to legal.
i try to switch it to letter but it was not kept it switch back to legal.
any adviced will be good ?
Thanks

Hi,
What's the operating system of remote PC we log onto? Here, I am not sure that this can help but we can give a try by disabling the following policy setting:
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Printer Redirection\Use Remote Desktop Easy Print printer driver first
Regarding this point, the following KB article can be referred to for more information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
https://support.microsoft.com/en-us/kb/980056
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Issue with deleting a group using Request APIs in OIM 11g R1

Hi,
I am facing an issue with Request Based provisioning in OIM 11g R1.
I am currently testing a scenario where i have imported a data set for 'Modify Provisioned Resource' and am able to add a group/entitlement to an already provisioned resource by using the following code :
        RequestBeneficiaryEntityAttribute childEntityAttribute= new RequestBeneficiaryEntityAttribute();
        childEntityAttribute.setName("AD User Group Details");
        childEntityAttribute.setType(TYPE.String);
        List<RequestBeneficiaryEntityAttribute> childEntityAttributeList=new ArrayList<RequestBeneficiaryEntityAttribute>();
        RequestBeneficiaryEntityAttribute attr = new RequestBeneficiaryEntityAttribute("Group Name", <group>,                                                                       RequestBeneficiaryEntityAttribute.TYPE.String);
        childEntityAttributeList.add(attr);
        childEntityAttribute.setChildAttributes(childEntityAttributeList);
        childEntityAttribute.setAction(RequestBeneficiaryEntityAttribute.ACTION.Add);
        beneficiaryEntityAttributeList = new ArrayList<RequestBeneficiaryEntityAttribute>();
        beneficiaryEntityAttributeList.add(childEntityAttribute);
        beneficiarytEntity.setEntityData(beneficiaryEntityAttributeList);
This works fine for adding a group but if i try to remove a group by changing the action to Delete in the same code, the request fails. The only change made is in the following line:
childEntityAttribute.setAction(RequestBeneficiaryEntityAttribute.ACTION.Delete);
Could you please suggest where can this possibly be wrong.
Thanks for your time and help

Hi BB,
I am trying to follow up your response.
You are suggestng to use prepopulate adapter for to populate respource object name, that means We have to just use an sql query from obj tabke to get the resource object name. right ?? it could be like below, what should I have entity-type value here ??
<AttributeReference name="Field1" attr-ref="act_key"
available-in-bulk="false" type="Long" length="20" widget="ENTITY" required="true"
entity-type="????"/>
<PrePopulationAdapter name="prepopulateResurceObject"
classname="my.sample.package.prepopulateResurceObject" />
</AttributeReference>
<AttributeReference name="Field2" attr-ref="Field2" type="String" length="256" widget="lookup-query"
available-in-bulk="true" required="true">
<lookupQuery lookup-query="select lkv_encoded as Value,lkv_decoded as Description from lkv lkv,lku lku
where lkv.lku_key=lku.lku_key and lku_type_string_key='Lookup.xxx.BO.Field2'
and instr(lkv_encoded,concat('$Form data.Field1', '~'))>0" display-field="Description" save-field="Value" />
</AttributeReference>
Then I need think about the 'Lookup.xxx.BO.Field2' format.
Could you please let me know if my understanding is correct?? What is the entity-type value of the first attribute reference value?
Thanks for your all help.

Oracle 10g - issue with "DELETE from TABLE WHERE ID in (1,2,3)" (cfqueryparam used)

Hello, everyone.
I am having issues with running a DELETE statement on an Oracle 10g database.
DELETE
FROM tableA
WHERE ID in (1,2,3)
If there is only one ID for the IN clause, it works. But if more than one ID is supplied, I get an "SQL command not properly ended" error message. Here is the query as CF:
DELETE
FROM TRAINING
WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
Anyone work with Oracle that can help me with this? I'm an experienced MS-SQL developer; Oracle is new to me.
Thanks,
^_^

Nevermind.. a co-worker just told me that I still have to use parenthesis around the values for the IN clause.

Issue with Delete Index in process chain

Hi All,
I have a situation with Delete Index in my process chain.
Delete Index step, before loading data to cube, is taking around 2Hr to complete but some times it completes within 5 mins.
Anyone faces such issue? If yes, how can I fix it?
Thanks and Regards,
Alok

Hi,
If Statistics are not maintained for the cube then also it might casue the high run time in index deletion.
if its urgent then, can u try doing it manually form performance tab....
or once process chain step is complete, create statistics for the cube. Next run should take less time
Please try.
Regards,
Gaurav

Deleting print drivers on Windows Server 2008 R2 without Print Role

Hi,
I'm using Windows Server 2008 R2 with Citrix Xenapp for published desktops meaning that i need to add a number of different printers to the server for the various users. Unfortunately i have some printer drivers that i think are conflicting and want to remove
these from the server.
How can i do this without adding the Print and Document Services role? Without this role i don't believe i can access 'Print Management' in the same way that i would with a Windows 7 client and then remove the driver package.
Is there another way that i can do this or should i be adding this role just to remove these drivers and then perhaps removing the role (if necessary), assuming that this is possible?
Thanks for any help.

add the tools for print management
in elevated cmd window
dism /online /enable-feature /featurename:Printing-AdminTools-Collection
If you already have local shared prints on the server, add the role. Adding the Role installs the tools and opens the File and print sharing firewall port which would have been achieved by adding a shared printer. You do not need to add the Print
role to setup a machine as a print server, it's not a requirement.
Alan Morris Windows Printing Team

Issues With Word Print Dialogue in Leopard

I have run accross an issue with the MS Word 2008 print dialogue. The window is discolored and its contents located in strange locations. This would appear to be an issue with the OS's rendering of the Print window, as it looks like what might happen to a badly written program for system such as Tiger that use the old aqua appearance. Any suggestions regarding this issue would be appreciated.

I don't have Word 2008, but is that the only App that does it?
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
Any change on reboot?

Issues With Deleting Printer Drivers

Similar Messages

Maybe you are looking for