Issues with deploying 6880-X in VSS Mode

Hi Everyone,
I wanted to query the support community to see if folks are encountering issues in deploying the 6880-X in VSS mode. We first looked at this soluition when it was running 15.1(2) SY2 as the recommened GA code. We ran into several issues:
1) VSL Link Timeout - Workaround:modify LMP timer or upgrade to 15.1(2)SY4
2) Port-member goes into suspendstate when using 1000BASE-SX - shut/no shut suspended interface
We ran into this and some other issues even with the eFSU upgrade process. So my question is have you run into similiar difficulties in running the 6880 in VSS mode. Did you go ahead and deploy? If so did you deploy with 15.1(2)SY4 (new Cisco GA code) or did you live with the state you are in?
Were there ways that you mitigated these issues?
Thanks,
Patnaik

Hi Reza,
Here you go. Just so you know I resolved the suspended port-member by OIR the optic that was displayed as a 10G interface.
lab6880#sh run inter te1/3/14
Building configuration...
Current configuration : 1546 bytes
interface TenGigabitEthernet1/3/14
no switchport
mtu 9216
no ip address
no ip proxy-arp
platform qos queue-mode mode-dscp
wrr-queue bandwidth 100 150 125 150 0 0 100
wrr-queue queue-limit 20 40 10 10 0 0 5
wrr-queue random-detect min-threshold 1 50 60 80 100
wrr-queue random-detect min-threshold 2 70 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100
wrr-queue cos-map 4 1 3
wrr-queue cos-map 5 1 4
wrr-queue dscp-map 1 1 1 2 3 4 5 6 7 8
wrr-queue dscp-map 1 1 9 11 13 15 16 17 19 21
wrr-queue dscp-map 1 1 23 25 27 29 31 33 35 37
wrr-queue dscp-map 1 1 39 41 42 43 44 45 47 49
wrr-queue dscp-map 1 1 50 51 52 53 54 55 57 58
wrr-queue dscp-map 1 1 59 60 61 62 63
wrr-queue dscp-map 1 2 0
wrr-queue dscp-map 2 1 10 12 14
wrr-queue dscp-map 3 1 18 20 22
wrr-queue dscp-map 3 2 26 28 30
wrr-queue dscp-map 4 1 24 32 34 36 38
wrr-queue dscp-map 7 1 48 56
rcv-queue dscp-map 1 1 1 2 3 4 5 6 7 8
rcv-queue dscp-map 1 1 9 11 13 15 17 19 21 23
rcv-queue dscp-map 1 1 25 27 29 31 33 35 37 39
rcv-queue dscp-map 1 1 41 42 43 44 45 47 49 50
rcv-queue dscp-map 1 1 51 52 53 54 55 57 58 59
rcv-queue dscp-map 1 1 60 61 62 63
rcv-queue dscp-map 1 2 0
rcv-queue dscp-map 1 3 16
rcv-queue dscp-map 2 1 10 12 14
rcv-queue dscp-map 3 1 18 20 22
rcv-queue dscp-map 3 2 26 28 30
rcv-queue dscp-map 4 1 24 32 34 36 38
rcv-queue dscp-map 7 1 48 56
macro description UPLINK
arp timeout 300
channel-group 100 mode active
end
lab6880#sh run inter te2/5/14
Building configuration...
Current configuration : 1546 bytes
interface TenGigabitEthernet2/5/14
no switchport
mtu 9216
no ip address
no ip proxy-arp
platform qos queue-mode mode-dscp
wrr-queue bandwidth 100 150 125 150 0 0 100
wrr-queue queue-limit 20 40 10 10 0 0 5
wrr-queue random-detect min-threshold 1 50 60 80 100
wrr-queue random-detect min-threshold 2 70 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100
wrr-queue cos-map 4 1 3
wrr-queue cos-map 5 1 4
wrr-queue dscp-map 1 1 1 2 3 4 5 6 7 8
wrr-queue dscp-map 1 1 9 11 13 15 16 17 19 21
wrr-queue dscp-map 1 1 23 25 27 29 31 33 35 37
wrr-queue dscp-map 1 1 39 41 42 43 44 45 47 49
wrr-queue dscp-map 1 1 50 51 52 53 54 55 57 58
wrr-queue dscp-map 1 1 59 60 61 62 63
wrr-queue dscp-map 1 2 0
wrr-queue dscp-map 2 1 10 12 14
wrr-queue dscp-map 3 1 18 20 22
wrr-queue dscp-map 3 2 26 28 30
wrr-queue dscp-map 4 1 24 32 34 36 38
wrr-queue dscp-map 7 1 48 56
rcv-queue dscp-map 1 1 1 2 3 4 5 6 7 8
rcv-queue dscp-map 1 1 9 11 13 15 17 19 21 23
rcv-queue dscp-map 1 1 25 27 29 31 33 35 37 39
rcv-queue dscp-map 1 1 41 42 43 44 45 47 49 50
rcv-queue dscp-map 1 1 51 52 53 54 55 57 58 59
rcv-queue dscp-map 1 1 60 61 62 63
rcv-queue dscp-map 1 2 0
rcv-queue dscp-map 1 3 16
rcv-queue dscp-map 2 1 10 12 14
rcv-queue dscp-map 3 1 18 20 22
rcv-queue dscp-map 3 2 26 28 30
rcv-queue dscp-map 4 1 24 32 34 36 38
rcv-queue dscp-map 7 1 48 56
macro description UPLINK
arp timeout 300
channel-group 100 mode active
end
interface Port-channel100
no switchport
dampening 20
mtu 9216
ip address 172.16.2.250 255.255.255.254
ip pim sparse-dense-mode
ip ospf network point-to-point
logging event link-status
logging event nfas-status
logging event bundle-status
load-interval 30
carrier-delay msec 0

Similar Messages

Issue with deploying in WLS 10.3, Jdev11g

I previously has issue with ClassNotFoundException on log4j.logger class and I was able to resolved it by following suggestion on this thread: Re: Question about dependent projects (and their libraries) in 11g and add the following to my WEB-INF/weblogic.xml:
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>
However, after I i have this added, I'm unable to deploy my application because of invalid cast exception:
java.lang.ClassCastException: com.ctc.wstx.stax.WstxInputFactory cannot be cast to javax.xml.stream.XMLInputFactory
     at javax.xml.stream.XMLInputFactory.newInstance(XMLInputFactory.java:137)
     at weblogic.servlet.internal.TldCacheHelper$TldIOHelper.parseXML(TldCacheHelper.java:124)
     at weblogic.descriptor.DescriptorCache.parseXML(DescriptorCache.java:380)
     at weblogic.servlet.internal.TldCacheHelper.parseTagLibraries(TldCacheHelper.java:65)
     at weblogic.servlet.internal.War.getTagInfo(War.java:891)
Any help would be greatly appreciated
Thanks
Tony

WLS 10.3 supports two options for adding application wide libraries in the EAR file. You can add them either to the APP-INF/lib or a library directory of your choice.
- Select the application in the Application Navigator drop down.
- Open the Context Menu and select Application Properties.
- In Deployment create a Deployment Profile
- In the Application Assembly select all the libraries and enter a directory name for each (eg. APP-INF/lib)
If you like to have a library directory of your choice do all the steps above plus:
- Expand the Application Resources accordion
- Expand the Deployment Descriptors
- Add the application.xml Deployment Descriptor version 5.0
- Add the <library-directory>libname</library-directory>
Will blog this later today.
--olaf

Issue with deploying EAR to Weblogic 10.3.4 from STS

Hi,
I am using Spring Source Tool 2.6 as the IDE. While publishing the EAR to weblogic from STS, it is not happening. It doesnt give any error too. When I check from the admin console under deployments it will not be found. However, I am able to deploy the same ear file from admin console without any issue. Am I missing some thing while configuring the domain? Is there any work around for this? (Note: I am creating the domain by selecting the default options in dev environment).
Thanks,
Vishnu

There appears to be an issue with tooling versions for Oracle tools and underlying eclispe. see following
http://forum.springsource.org/showthread.php?104597-STS-2.6.0-M2-does-not-allow-adding-Weblogic-Servers

Search issue with Outlook 2010 SP2 in Online mode

We are dealing with a weird issue that started after a routine maintenance window this past week. We took our Exchange 2010 server down while we performed maintenance on our SANs. After bring the servers back up we have developed an issue in
Outlook with searching. When a user searches for emails only those that are before the outage are returned in the resultant set even if an email from after the outage matches the search. However, if you search from OWA all the expected results
are returned. Please remember that we are in Online mode with Outlook and not cached mode.
I can say that I have checked Exchange and it appears that all indexes are fine and the fact that OWA returns the correct result would prove that.
One other thing to note. If you do an Advanced Find in Outlook and select frequently-used text fields it give weird search results, but it will include the emails from this week.
What am I missing? I can't think of anything else to look for.

Hi,
Based on my knowledge, when Outlook is in Online Mode, the search is based on the Exchange Search Service. Although the search works on OWA, I still suggest you try re-indexing on Exchange Server to check the result.
Moreover, there are some steps we can perform to narrow down this issue:
1. Switch to Cached Exchange Mode, then the Index is based on the local computer, check if then the issue persists. If the issue persists, we can say it's not about the index, maybe something else stops Outlook from searching properly, such as an add-in.
Also, it can be a workaround if it works in Cached Mode.
2. Create a new Outlook Profile to setup the account, check if the problem persists. Please do not remove the previous profile as this is just a test, I want to know if the problem persists with a new profile.
Please feel free to post back with more details.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here.

Issues with video playback, messed up shuffle mode with playlist sharing

I have a Mac (10.4.7) and a PC (XP SP2)... both are running iTunes 7 downloaded on September 12. All of my media is on my PC, and I do playlist sharing with my PowerBook across mu home network. A few issues with iTunes 7 that didn't exist for me in iTunes 6.0.5:
- Video playback is like multicolored TV snow. This happens on my PC as well as when the video is shared to my Mac.
- When sharing the music to my Mac, and I'm listening in shuffle mode, many times the same song will play twice in a row.
- I've only had this happen once so far (in the last 24 hours), but again I was listening to music shared to my Mac. One song played, then started to play again for the second time in a row. The song played for about 15 seconds, then jumped into another song. After that song was over, it jumped back and played the last 15 seconds of the previous song, all while having a completely different song highlighted in iTunes with the track position set to 0:00. It was very, very odd.
Frankenstien PC/PowerBook G4 Mac OS X (10.4.7) Windows XP Pro SP2

The first issue is resolved by http://discussions.apple.com/thread.jspa?threadID=639597&tstart=0
Any other ideas?

Oracle Weblogic Server 12c, issue with deploying the war created from Wavemaker tool

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Issues with graphics ... force 'safe mode' graphics in normal mode?

Hi,
I have a late 2007 MBP with the ATI graphics chipset. Everything was working fine other than a few distorted screens at the very start... now I can only get in to safemode.
I can not get into the login window on normal and sometimes it flicks to a screwed up display with beachball (display b/w beachball is coloured) everything appears to work fine in safemode other than the obvious fact none of the other extensions are enabled (sound, wifi etc)
Is it possible to force the OS to load normally but without the accelerated graphics? When I turn on the computer it usually shows distored at the apple screen and then clears up to a grey screen and usually goes blue before failing at screwed screen + visible beachball.
I've reset the pram,
fixed permissions and everything else using applejack
removed refit
fsck -fy
I would try to do an archive and install but unfortunately the drive has died on this laptop. I did try to boot from a mac server using netboot / netinstall however I get the same issues as normal mode.
I just find it really frustrating that I can type here with net access in safeboot and use almost all I use this for anyway...
I also bought a external dvd drive with my mac mini server however the laptop does not seem to detect that.
Anyone with any thoughts? thanks

Is it possible to force the OS to load normally but without the accelerated graphics?
Not with this model. Some newer MBPs had both integrated graphics and a discreet graphics chipset, but not those having the NVIDEA 8600M GT chipset, which I suspect yours does.
There are defective NVIDEA 8600 chipsets in the Late 2007/Early 2008 MBPs and, if that it the source of your problems, there is no home remedy--the logic board must be replaced.
Fortunately, Apple has a program that covers this at no charge to you:
http://support.apple.com/kb/TS2377
I suggest you print out that page and take it with you; it seems some Apple Store employees and AASPs are not aware of the program. The techs have a special tester that quickly determines if the NVIDEA chipset has failed and the computer qualifies for the free logic board replacement. If that test fails to detect a bad graphics chipset, then something else is afoot.
The point is that, with your model, you need to eliminate the NVIDEA curse first before trying further diagnosis.
I would try to do an archive and install but unfortunately the drive has died on this laptop.
Try a cleaning disk. It's amazing how meay people here report being told by a tech teht the optical drive was dead but resurrected it with a simple cleaning
Message was edited by: Allan Jones

Issue with opening the Outline in Edit mode

Hello Gurus,
I am opening a huge outline in the Edit mode on EAS Console & it's giving me an error "not enough memory to perform this operation", while I am able to open the other small outlines on EAS Console/Same server in the edit mode.
Is this to do with freeing up Java memory. Will restart of EAS service work in this issue & free up Java memory?
Thanks in advance.

Hi RishiI've had problems with opening up the outline in edit mode before. Haven't come across this error no, and I can't find anything on the knowledge base. Try this though...- Check at the Analytic server level for Locks and Locked Objects. If there are any get rid.- "Update Mode" in the Spreadsheet Add-In will cause similar problems by locking data blocks.- All else fails! Reboot serverIf it's something else drop me a line back. I'll be interested to hear whats causing the problem.TaMark

Issue with deployment

We tried deploying the component through JSPM, but JSPM is not working properly, so we are trying to deploy the software components through SDM.
     We have started to deploy the all the component together it is getting stuck after some time.
     We have started to deploy the component one by one it is still getting stuck after some time.
Can anybody please help us out.
Below is the log.
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[G:\usr\sap\NWB\DVEBMGS00\SDM\program\log\sdmlog20090413.log]/>
<!PATTERN[sdmlog20090413.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Apr 13, 2009 3:02:25 PM Info:
Apr 13, 2009 3:02:25 PM Info: ===============================================
Apr 13, 2009 3:02:25 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:02:25 PM Info: ===============================================
Apr 13, 2009 3:02:27 PM Info: SDM started successfully.
Apr 13, 2009 3:06:12 PM Info:
Apr 13, 2009 3:06:12 PM Info: ===============================================
Apr 13, 2009 3:06:12 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:06:12 PM Info: ===============================================
Apr 13, 2009 3:06:14 PM Info: SDM started successfully.
Apr 13, 2009 3:06:48 PM Info:
Apr 13, 2009 3:06:48 PM Info: ============================================
Apr 13, 2009 3:06:48 PM Info: =   Starting to execute command 'server'   =
Apr 13, 2009 3:06:48 PM Info: ============================================
Apr 13, 2009 3:06:48 PM Info: Starting SDM - Software Deployment Manager...
Apr 13, 2009 3:06:48 PM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0009.20060817110748.0000
Apr 13, 2009 3:06:49 PM Info: ====================================
Apr 13, 2009 3:06:49 PM Info: JControl is shutting SDM Server down
Apr 13, 2009 3:06:49 PM Info: ====================================
Apr 13, 2009 3:06:49 PM Info: Server finished sending back the answer of the ShutdownRequest.
Apr 13, 2009 3:06:49 PM Info: Shutting dispatcher down
Apr 13, 2009 3:06:54 PM Info:
Apr 13, 2009 3:06:54 PM Info: ============================================
Apr 13, 2009 3:06:54 PM Info: =   Starting to execute command 'server'   =
Apr 13, 2009 3:06:54 PM Info: ============================================
Apr 13, 2009 3:06:54 PM Info: Starting SDM - Software Deployment Manager...
Apr 13, 2009 3:06:55 PM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0009.20060817110748.0000
Apr 13, 2009 3:06:57 PM Info: SDM operation mode successfully set to: Integrated
Apr 13, 2009 3:06:58 PM Info: JStartupFramework is requesting to start the SDM Server.
Apr 13, 2009 3:06:58 PM Info: Start the SDM Server integrated in the JStartupFramework.
Apr 13, 2009 3:06:58 PM Info: Initializing Network Manager (50017)
Apr 13, 2009 3:06:58 PM Info: Starting SDM Server listening on port 50018
Apr 13, 2009 3:06:58 PM Info: SDM started successfully.
Apr 13, 2009 3:08:44 PM Info:
Apr 13, 2009 3:08:44 PM Info: ===============================================
Apr 13, 2009 3:08:44 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:08:44 PM Info: ===============================================
Apr 13, 2009 3:08:45 PM Info: SDM started successfully.
Apr 13, 2009 3:11:44 PM Info:
Apr 13, 2009 3:11:44 PM Info: ===============================================
Apr 13, 2009 3:11:44 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:11:44 PM Info: ===============================================
Apr 13, 2009 3:11:45 PM Info: SDM started successfully.
Apr 13, 2009 3:11:52 PM Info: Opened client connection to punitp02979 (IP address punitp02979/<ipaddress>, remote port 2561)
Apr 13, 2009 3:11:52 PM Error: Wrong password supplied - Request for Logon rejected. Remaining logon attempts until SDM server will be shut down: 2
Apr 13, 2009 3:11:55 PM Info: Close client connection to punitp02979/<ipaddress>, remote port 2561
Apr 13, 2009 3:12:04 PM Info:
Apr 13, 2009 3:12:04 PM Info: ===============================================
Apr 13, 2009 3:12:04 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:12:04 PM Info: ===============================================
Apr 13, 2009 3:12:05 PM Info: SDM started successfully.
Apr 13, 2009 3:15:02 PM Info:
Apr 13, 2009 3:15:02 PM Info: ===============================================
Apr 13, 2009 3:15:02 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:15:02 PM Info: ===============================================
Apr 13, 2009 3:15:04 PM Info: SDM started successfully.
Apr 13, 2009 3:15:11 PM Info: Opened client connection to punitp02979 (IP address punitp02979/<ipaddress>, remote port 2654)
Apr 13, 2009 3:15:11 PM Info: Request for Logon as admin accepted
Apr 13, 2009 3:16:14 PM Info: Loading archive 'G:\usr\sap\trans\EPS\in\BPMDMAPPLI06_4.sca'
Apr 13, 2009 3:16:27 PM Info: Actions per selected component:
Apr 13, 2009 3:16:27 PM Info: No action: Selected development component 'com.sap.mdm.uwl'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will not update currently deployed development component 'com.sap.mdm.uwl'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'0'.
Apr 13, 2009 3:16:27 PM Info: No action: Selected development component 'com.sap.mdm.uwl.config'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will not update currently deployed development component 'com.sap.mdm.uwl.config'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'0'.
Apr 13, 2009 3:16:27 PM Info: Initial deployment: Selected software component 'BP_MDM_APPLICATION'/'sap.com'/'SAP AG'/'1000.5.50.6.4.20090119093241''/'1' will be deployed.
Apr 13, 2009 3:16:27 PM Info: No action: Selected development component 'com.sap.pct.mdm.appl.masteriviews'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will not update currently deployed development component 'com.sap.pct.mdm.appl.masteriviews'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'0'.
Apr 13, 2009 3:16:27 PM Info: Initial deployment: Selected development component 'com.sap.pct.mdm.appl.packages.mdm_550'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will be deployed.
Apr 13, 2009 3:16:37 PM Info: Saved current Engine state.
Apr 13, 2009 3:16:39 PM Info: Starting: Initial deployment: Selected development component 'com.sap.pct.mdm.appl.packages.mdm_550'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will be deployed.
Apr 13, 2009 3:16:39 PM Info: SDA to be deployed: G:\usr\sap\NWB\DVEBMGS00\SDM\root\origin\sap.com\com.sap.pct.mdm.appl.packages.mdm_550\SAP AG\1\5.50.20090119083803.0000\com.sap.pct.mdm.appl.packages.mdm_550.epa
Apr 13, 2009 3:16:39 PM Info: Software type of SDA: single-module
Apr 13, 2009 3:16:39 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Module) *****

Hi,
You could check the most recent logs under the SDM log directory:
<drive>:\usr\sap\<sid>\JC00\SDM\program\log
esp ones like sdm_*.err. These normally contain information about issues related to memory while loading the archives for deployment. We had memory issue resulting in SDM getting hung.
Hope it helps.
Regards,
Srikishan

Qsort issue with CVI 2012 in 64 bit mode

Possible CVI 2012 64 bit bug.
Qsort returns very slowly in CVI2012 in 64 bit release mode. Not sure if there are memory leaks or if function actually returns the correct answer as I fixed the problem before going back and isolating the issue to the code supplied. The issue seems to be resolved in CVI 2013.
In the example provided, an array is created, seeded, and sorted. Approximate timing results (with a chi by eye averaging) are given below for an array of 1e6 double values.
CVI 2012
32 bit debug                        32 bit release                                       64 bit debug                                    64 bit release
4.5 seconds                         0.32 seconds                                       4.3 seconds                                     44.0 seconds
CVI 2013
32 bit debug                        32 bit release                                       64 bit debug                                    64 bit release
2.8 seconds                          0.22 seconds                                      2.0 seconds                                     0.18 seconds
Attachments:
qsort test.zip ‏3 KB

Hey,
Thank you for your feedback, I compiled your code and you are right. In CVI 2013 the problem seems to be solved. Unfortunately, I can't place a CAR (correction action request) for CVI 2012 because the problem has been addressed by our R&D department.
Thanks again for your feedback.

Issues with Deployment to WLS Running on Virtual Box

Hi
JDeveloper 11.1.1.6, BPM 11.1.1.6, WLS 10.3.6
I just installed the SOA & BPM Development VM 11.1.1.6 available at http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html
Domain selected : dev_bpm_spaces
My Host OS is : Windows 7 Prof 64bit (Total 16GB Ram)
Memory allocated to VM : 8GB, Processors : 4
I am able to install everything, start the servers and access the consoles.
Everything looks fine.
But when I am trying to Deploy a BPM Application to the WLS in the VM, I am getting the below Exception. (Tried to Deploy from Local JDeveloper)
When I see the WLS Console -> Servers, I see the following servers.
AdminServer, bam_server1, UCM_server1, WC_Collaboration, WC_Spaces, IBR_server1
First, I started only the AdminServer and tried to Deploy the BPM Application, and I was getting the errors shown at the end.
Then I started the bam_server1, UCM_server1, WC_Collaboration, WC_Spaces servers on the VM and tried to deploy again. Then I got the error only for IBR_server1.
I cannot see the server IBR_server1 in the 'VM Control Center', but it is only shown in the WLS Console Servers.
So I tried to start the IBR_server1 from the WLS Console. I got the following errors
------For server IBR_server1, the Node Manager associated with machine LocalMachine is not reachable.
------All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
So my doubts are as follows
1. Only AdminServer is not enough to Deploy the BPM Applications? Why is it trying to connect to other servers while deploying?
When I created a separate Domain manually (local machine - not the VM), only with AdminServer I was able to deploy BPM Applications.
2. If IBR_server1 is also required, how can I start it?
3. I could not see the Node Manager start script in the VM (in the same folder where the start scripts for WLS are present : /home/oracle/bin)
Deployment Exception Logs
[03:51:51 PM] Deploying Application...
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'UCM_server1'. Deployment is deferred until 'UCM_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'UCM_server1'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'IBR_server1'. Deployment is deferred until 'IBR_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'IBR_server1'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'WC_Collaboration'. Deployment is deferred until 'WC_Collaboration' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'WC_Collaboration'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'WC_Spaces'. Deployment is deferred until 'WC_Spaces' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'WC_Spaces'.
[03:51:54 PM] [Deployer:149193]Operation 'deploy' on application 'BookRequest' has failed on 'AdminServer'
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: .
[03:51:54 PM] Weblogic Server Exception: weblogic.application.ModuleException:
[03:51:54 PM] Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
[03:51:54 PM] See server logs or server console for more details.
[03:51:54 PM] weblogic.application.ModuleException:
[03:51:54 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
[03:51:54 PM] #### Deployment incomplete. ####
[03:51:54 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Thanks for any help
Regards
Sameer

Hi Vlad
Thank you for your response.
I did deploy the BPM Application to only AdminServer. Infact only AdminServer was shown in the JDeveloper Deployment Wizard.
Even then during the Deployment, I think it is somehow trying to connect to the other servers from AdminServer.
So I copied my BPM Application code from my local Windows to Linux in VM and deployed from JDeveloper in Linux with only AdminServer running.
It was still giving the same error.
Then I started all the Servers and Deployed the BPM Application from the JDeveloper in Linux, then it got Deployed Successfully.
Coming to the issue of the ORA-12505, I have Oracle DB Installed on my local system and is running on the same port 1521 as that of database in Linux in the VM.
I think that is that causing the issue. When I deploy from local JDeveloper, it is trying to connect to the local database which is on same port but different SID.
So it was giving that error.
So my learnings are
1. All the servers in the domain 'dev_bpm_spaces' should be running for deploying the applications.
2. We should deploy it from the Linux, expecially when we have local database server running.
3. I understand that the ports mapping between the linux and windows is already configured in the VM, but sometimes the BPM workspace is not accessible from the local windows.
So it is better to use the Linux for development, deployment and testing.
Thanks and Regards
Sameer

Urgent :- Issue with deploying application in Oracle Application server

Hello All,
Hope all of you are doing good ! I am facing an issue relating to deploying applications using the Enterprise manager. When i deploy the war file using Deploy WAR file option in the OEM, i get the following error -
Failed to deploy web application "gCube". Failed to deploy web application "gCube". . The configuration files for this OracleAS 10G instance are inconsistent with the
configuration stored in the repository. In order to protect the repository,
no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. The exception associated with this failed operation is:
{0}
. Please also check the logs located at
ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
the configuration files on disk. Some possible causes are:
* permissions on files
* file contention issues on Windows NT
* internal Oracle error
After resolving the problem that prevented DCM from updating the configuration
files, you may use the dcmctl resyncInstance command to resolve the problem.
Alternatively, you can stop and then restart the active dcmctl or EMD
process and resyncInstance will automatically be performed.
Root Cause: invalid stream header
Resolution: . invalid stream header
Please could you throw some light on this issue and also provide a resolution to fix this issue at the earliest ?
Your help in this , will be greatly appreciated.
Thanks and Regards,
Ramanan.

Hello All,
Could anyone assist me with a fix for the problem ?
Would appreciate it greatly.
Thanks.

Crashing issue with dual cards not in SLI mode

Running CS6 on a HPZ820 with 64GB RAM and TWO Nividia Quadro4000s... having some crashing issues - DisplaySurface.dll error. I am NOT running cards in SLI mode. Any ideas? I have some NewBlueFX plug-ins that I disabled the GPU - that helped. But now it started crashing again with same error. System was built up to specs.
Any advice?

Does it crash if you remove one of the cards?

Having issues with iMac not working after sleep mode

When waking up from sleep mode or turning machine on in the mornig computer will not recognize the mouse or track pad. I have a 3.06 GHZ Intel Core 2 Duo.

sudo nvram boot-args=”-p -r” should get the computer to reset the nvram. After words its a good idea, to go back into Apple Menu, System Preferneces, Startup Disk, and make sure your Hard Drive is selected.
Is the OS up to date? if not, why not try running software update?
have you tried repalcing the batteries?
Have you tested with a wired keyboard or mouse? (dose it have the same issue)
Have you tried a safeboot?

Issues with deploying BC4J/JSP applications on OC4J

To everyone who's been having problems deploying BC4J/JSP applications to OC4J.
We are aware that you're having problems deploying to OC4J, and we're working on them. OC4J was not available in time for us to add support for OC4J deployment to the JDeveloper 3.2.3 release. In addition there are some bugs in the first release of OC4J that have an impact on BC4J applications. This note describes the issues, and how we plan to address them.
Issue 1: Classpath problems
People have been getting "class not found" or "properties file not found" errors when they try to run their JSP. The answer is to make sure that all relevant archives and your JSP's .properties file are in the OC4J classpath - there's a note addressing the .properties file problem at http://technet.oracle.com:89/ubb/Forum99/HTML/000028.html. In general though, setting up the classpath can be tricky.
Issue 2: JSP TAG NOT RELEASED ON END TAG. SAME TAG IS REUSED.
This issue affects JSP pages whose behaviour relies on a tag instance being cleaned up as a result of release() being called.
Your tag will not be released, and subsequent instances of the tag will reuse the first instance, rather than instantiating a new
one.
Issue 3:JSP SCRIPTABLE VARIABLE NULL
A scriptable variable set in a tag cannot be accessed by a scriptlet. For example, this JSP code will throw a
NullPointerException, because the scriptlet cannot access the value of resultRow:
<jbo:Row id="resultRow" action="CURRENT" datasource="customer_vo1" />
<%
session.putValue("FIRSTNAME", resultRow.getAttribute("Firstname").toString());
%>Workaround: Add a line of code at the beginning of the scriptlet to explicitly get the variable's value from the page context, for
example:
<jbo:Row id="resultRow" action="CURRENT" datasource="customer_vo1" />
<%
resultRow = (oracle.jbo.Row)pageContext.findAttribute("resultRow");
session.putValue("FIRSTNAME", resultRow.getAttribute("Firstname").toString());
%>
What we plan to do
To address issue 1, we're currently testing a utility that installs the BC4J runtime libraries to OC4J, and provides a script to start OC4J with the correct classpath. We plan to post this by the end of this week, along with instructions for deploying a BC4J application to OC4J; deployment will be a lot simpler after running the utility.
To address issues 2 and 3, we're working on a second utility that installs BC4J runtime and provides a fix to the JSP compiler. We plan to post this second utility by the end of next week.
We do apologise for the problems you're having; please bear with us as we work on making it easier for you to deploy BC4J applications to OC4J.
Thanks
Blaise

Hi, I have been trying desparately to deploy
a simple example JDeveloper application for months and months.
I HAVE NEVER BEEN SUCCESSFUL IN DEPLOYING ANYTHING.
I don't know much about webservers and I am relying
on the instructions from JDeveloper help and this website.
I have already tried Apache, and WebLogic
because there are instructions in the JDev help.
No luck.
Now I am trying to use OC4J on 9ias because there are instructions.
I have read the instructions about how to install a BC4J
app on OC4J about 25 times, but I can't get this thing to work.
It works fine inside of JDeveloper.
I create a BC4J project using the scott
schema (just the dept and emp tables).
Then I create an empty project for my JSP client.
I choose JSP Application from the web
objects and it connects to my BC4J project.
As I say, when I run it in JDeveloper, there is no problem.
In the instructions for installing BC4J
in OC4J, it first says install JDev 3.2.3 and OC4J.
This is done, and it tested fine.
Then it says to install the deployment software.
No problem.
But when I deploy the app according to the instructions,
it just hangs (like Rick Wang's program did).
The main.jsp page loads and displays correctly,
but when I click on the links to the DeptView.jsp
or EmpView.jsp it just hangs.
Here is the entire batch file I'm using
to start OC4J: cd c:\oracle_9ias\j2ee\home
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\default-web-app\lib
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\classes
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\classes12.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordim817.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jndi.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbodatum12.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\al_BC4J.jar
java -cp C:\oracle_9ias\j2ee\home\orion.jar;%CLASSPATH%
com.evermind.server.ApplicationServer
pause
The file al_BC4J.jar contains my application.properties file
and my connections.properties file, as well as my business components.
All of the files referenced in my classpath are
present in my c:\oracle_9ias\j2ee\home\lib directory.
I noticed that Raghu's classpath contains a file called jdev.jar
So does the classpath of another fellow who says
he was successful in deployment (his name is Jeffrey Jackson).
I searched my JDev_3.2.3 for this file and found it nowhere.
I also searched my OC4J home and my 9iAS for this file and
found it nowhere.
It is nowhere on my C:\.
Is this file necessary?
I will also try removing my application.properties file
and my connections.properties file from my BC4J .jar file
and put them in a separate .jar file at the root level (as Raghu did).
However, Jeffery Jackson did not do this and says he was
successfull in deployment.
***DO I NEED TO JAR UP ANY OF MY THE FILES FROM the JSP
FOLDER IN JDevHome\myhtml???***
***or place them in the classpath?***
I have read over all of the discussions at: http://technet.oracle.com:89/ubb/Forum2/HTML/008232.html
and http://technet.oracle.com:89/ubb/Forum99/HTML/000028.html
many, many times.
Can anyone help me?

Issues with deploying 6880-X in VSS Mode

Similar Messages

Maybe you are looking for