Issues with deploying 802.1x (Sunray clients)

Hello all!
First of all, I am very unexperienced what comes to Sunrays (working mainly with networks ) so sorry if there are some very basic questions...
I am trying to implement PoC with 802.1x authentication with Sunray clients. It should be possible??
First problem that I encounter was I am not able to download CA certificate and client side key file via Sunray clients GUI. I was able to download clients own certificate easily. Is it even possible to download 802.1x certificates via GUI --> download certificate? What format should I use? I have tried regular .pem file format.
I also tried to use remote configuration file download option, but no luck either. It just failed. What parameters are minimum requirements in remote configuration file??
Is there any log files I should check?
Has any of you gents done 802.1X testing?
Any help will be welcome!!
Thank you in advance,
JJ

Well,
since nobody has answered nothing I'll happily can say that I solved this "problem" by myself. To be honest I'm not sure was the provided documentation wrote badly or was there problem to me to understand what I was reading
Anyway. I was not sure how one should make that remote configuration file and where to save it. After I studied IPSec configuration, there were little bit better explained how to make remote configuration file. After that I was able to save needed certificates to the Sun Ray thing client. It is however possible to direct download end devices own certificate through certificate menu on GUI, but you should download ca's certificate and private key via remote config.
What I understood it is mandatory to save remote configuration file under /tftpboot directory. And anything that is stated in that file should also locate in same directory. That way I was able to save badly needed files. Not sure is there some other way to do it...
There is not any minimum requirements for config file. I made just they stated in manual. Just make sure that when you try to download that file GUI just want to know servers IP or name and config file's name, not directory!!
Cheerio!
JJ

Similar Messages

Deployment issue: compatiblity issue with ODP, instant vs full client on PC

After a lot of deployment issues with full client, we thought we had the solution with Instant Client.
It worked great for a while, but now some of our users have full Oracle 11 client installed after installing our Instant Client because of other software that requires full client.
As soon as they install full client, our Instant Client breaks:
Exception has been thrown by the target of an invocation. (mscorlib)
The type initializer for 'Oracle.DataAccess.Client.OracleClientFactory' threw an exception.
The provider is not compatible with the version of Oracle client (Oracle Data Provider for .NET)
Our instant client is compiled with 2.111.6.20, the client is installing a different version (though I tried installing exactly same version does not seem to work either)
I've been experimenting to redirect the version to another assembly but no success.
How can I make Instant Client and Full client co-exist? The whole idea of using Instant was to be independent of other software who needs ODP.NET...
What do you do when 2 apps need different versions of ORacle ODP.NET (e.g. 2.111.6.0 vs. 2.112.1.0)?
Note that I don't have source code access to "our" app, so if it is at all possible through configuration, that is a prefered solution.
I also don't control our customers deployment strategy, they roll out apps over 1000's of PC's

According to documentation at [http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm]
>
Configuration File Support
For customers who have numerous applications on a computer that depends on a single version of ODP.NET, the Windows Registry settings for a given version of ODP.NET may not necessarily be applicable for all applications that use that version of ODP.NET. To provide more granular control, ODP.NET Configuration File Support allows developers to specify ODP.NET configuration settings in an application config, web.config, or a machine.config file.
If a computer does not require granular control beyond configuration settings at the ODP.NET version level, there is no need to specify ODP.NET configuration settings through configuration files.
The following is an example of a web.config file for .NET Framework 2.0 and higher:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<oracle.dataaccess.client>
<settings>
<add name="DllPath" value="C:\oracle\bin"/>
<add name="FetchSize" value="131072"/>
<add name="PromotableTransaction" value="promotable"/>
<add name="StatementCacheSize" value="10"/>
<add name="TraceFileName" value="C:\odpnet2.trc"/>
<add name="TraceLevel" value="63"/>
<add name="TraceOption" value="1"/>
</settings>
</oracle.dataaccess.client>
</configuration>

Issue with deploying in WLS 10.3, Jdev11g

I previously has issue with ClassNotFoundException on log4j.logger class and I was able to resolved it by following suggestion on this thread: Re: Question about dependent projects (and their libraries) in 11g and add the following to my WEB-INF/weblogic.xml:
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>
However, after I i have this added, I'm unable to deploy my application because of invalid cast exception:
java.lang.ClassCastException: com.ctc.wstx.stax.WstxInputFactory cannot be cast to javax.xml.stream.XMLInputFactory
     at javax.xml.stream.XMLInputFactory.newInstance(XMLInputFactory.java:137)
     at weblogic.servlet.internal.TldCacheHelper$TldIOHelper.parseXML(TldCacheHelper.java:124)
     at weblogic.descriptor.DescriptorCache.parseXML(DescriptorCache.java:380)
     at weblogic.servlet.internal.TldCacheHelper.parseTagLibraries(TldCacheHelper.java:65)
     at weblogic.servlet.internal.War.getTagInfo(War.java:891)
Any help would be greatly appreciated
Thanks
Tony

WLS 10.3 supports two options for adding application wide libraries in the EAR file. You can add them either to the APP-INF/lib or a library directory of your choice.
- Select the application in the Application Navigator drop down.
- Open the Context Menu and select Application Properties.
- In Deployment create a Deployment Profile
- In the Application Assembly select all the libraries and enter a directory name for each (eg. APP-INF/lib)
If you like to have a library directory of your choice do all the steps above plus:
- Expand the Application Resources accordion
- Expand the Deployment Descriptors
- Add the application.xml Deployment Descriptor version 5.0
- Add the <library-directory>libname</library-directory>
Will blog this later today.
--olaf

Issue with deploying EAR to Weblogic 10.3.4 from STS

Hi,
I am using Spring Source Tool 2.6 as the IDE. While publishing the EAR to weblogic from STS, it is not happening. It doesnt give any error too. When I check from the admin console under deployments it will not be found. However, I am able to deploy the same ear file from admin console without any issue. Am I missing some thing while configuring the domain? Is there any work around for this? (Note: I am creating the domain by selecting the default options in dev environment).
Thanks,
Vishnu

There appears to be an issue with tooling versions for Oracle tools and underlying eclispe. see following
http://forum.springsource.org/showthread.php?104597-STS-2.6.0-M2-does-not-allow-adding-Weblogic-Servers

Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
I am able to create the VPN connection but the connection will not allow data to be transferred.
Stats from a manual connection:
Cisco AnyConnect Secure Mobility Client Version 3.1.04072
VPN Stats
    Bytes Received: 14375
    Bytes Sent: 0
    Compressed Bytes Received: 0
    Compressed Bytes Sent: 0
    Compressed Packets Received: 0
    Compressed Packets Sent: 0
    Control Bytes Received: 0
    Control Bytes Sent: 0
    Control Packets Received: 0
    Control Packets Sent: 0
    Encrypted Bytes Received: 7820
    Encrypted Bytes Sent: 1207
    Encrypted Packets Received: 9
    Encrypted Packets Sent: 3
    Inbound Bypassed Packets: 0
    Inbound Discarded Packets: 0
    Outbound Bypassed Packets: 0
    Outbound Discarded Packets: 0
    Packets Received: 4
    Packets Sent: 0
    Time Connected: 00:03:01
Protocol Info
    Inactive Protocol
        Protocol Cipher: RSA_3DES_168_SHA1
        Protocol Compression: None
        Protocol State: Disconnected
        Protocol: DTLS
    Active Protocol
        Protocol Cipher: RSA_3DES_168_SHA1
        Protocol Compression: Deflate
        Protocol State: Connected
        Protocol: TLS
OS Version
    Windows 8 : WinNT 6.2.9200
Log from the data transmission software:
24/12/2013 12:51:13 - Application version = 1.11.28.0
24/12/2013 12:51:13 - Lodgement Library Version = 1.11.28.0
24/12/2013 12:51:13 - Connection Method = INTERNET
24/12/2013 12:51:13 - DIS Connection Type = Automatic
24/12/2013 12:51:13 - VPN Client = ACTIVE
24/12/2013 12:51:13 - Check Available Connections = NOT ACTIVE
24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
24/12/2013 12:51:13 - Language: English (Australia)
24/12/2013 12:51:13 -
24/12/2013 12:51:13 - Connected to ISP via LAN
24/12/2013 12:51:13 - Checking for presence of VPN client.
24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
24/12/2013 12:51:18 -
24/12/2013 12:51:18 - Checking Cisco AnyConnect version.
24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc. All Rights Reserved.
24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Initializing the VPN connection.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
24/12/2013 12:51:23 - Authenticating user.
24/12/2013 12:51:23 - Connected to VPN concentrator.
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Checking for profile updates...
24/12/2013 12:51:23 - Checking for product updates...
24/12/2013 12:51:23 - Checking for customization updates...
24/12/2013 12:51:23 - Performing any required updates...
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
24/12/2013 12:51:24 - Establishing VPN - Examining system...
24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
24/12/2013 12:51:24 - Establishing VPN - Configuring system...
24/12/2013 12:51:24 - Establishing VPN...
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connection to VPN client return code = 0.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
Connection timed out.
24/12/2013 12:51:46 -
24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
24/12/2013 12:51:46 - Disconnect in progress, please wait...
24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
24/12/2013 12:51:47 - Detached.
24/12/2013 12:51:47 - Disconnected from VPN concentrator.
24/12/2013 12:51:47 - *****************************************************
24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
24/12/2013 12:51:47 - *****************************************************
Issue history:
- Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
- Upgrade to Windows 8.1 stopped the VPN client working
- Refreshed system back to Windows 8 and reinstalled all software
- Cisco VPN client would not install on system
- Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
- Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
- Data transmission software returns error code #10060
Any assistance would be greatly appreciated.

anyone found the fix for this?

Issues with 64 bit win 7 clients printing from 2008 R2 print server

Hello All,
I have a Windows 2008 R2 SP1 64 bit server built with a print server role. My issue is 64 bit win 7 clients cannot add a new printer. The clients see the printer in the list, starts the printer installation, get to the point of downloading the
driver & then fails ' Windows cannot connect to the printer. ' the error is 0x0000012 or 0x000003ee. Any way I try to add the new printer I get the same result. The only way I can get the printer added is to do a local printer with the full path \\servername\printer_name
and then "have disk" and point to the driver folder on the print server to get the printer added.
Anyone have any thoughts on why the 64 bit clients will not add a new printer from a 64 bit print server ?
Thanks,
Steve

Hi Steve,
Please check if you can ping the print server successfully from this Windows 7 client computer. Did you encounter
the same issue when add other printers? Or just for this one printer?
Please type
regedit on Run to open Registry Editor and follow the path:
HKEY_CURRENT_USER\Printers\Connections and check if there has existent printer connection on the registry key.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Oracle Weblogic Server 12c, issue with deploying the war created from Wavemaker tool

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Issues with Java 1.6.0_29 client side

Has anybody encountered any issues with the applet display after upgrading the client JRE to 1.6.0_29?
On my station, the console logger says the following
ConsoleLogger::Creating NEW instance...
ERROR - Error loading session properties, com.sap.xmii.protocol.ProtocolReaderException: Error reading Header.
appletReadInputData [ERROR] - Error reading Header.
appletReadInputData [ERROR] - Error: Error reading Header.
ERROR - Error loading session properties, com.sap.xmii.protocol.ProtocolReaderException: Error reading Header.
appletReadCalcData [ERROR] - Error reading Header.
appletReadCalcData [ERROR] - Error: Error reading Header.
ERROR - Error loading session properties, com.sap.xmii.protocol.ProtocolReaderException: Error reading Header.
appletReadConsumable [ERROR] - Error reading Header.
appletReadConsumable [ERROR] - Error: Error reading Header.
What would be the required JRE setting to get past these errors in the console and make the three applets above display the required data?
Many thanks,
Paul.

Hi Mike,
There is no link in your message but if Oracle will provide a fix, I'll downgrade to 1.6.0_26
http://www.oracle.com/technetwork/java/javase/downloads/jre-6u26-download-400751.html
Thanks
paul.

Issues with deploying 6880-X in VSS Mode

Hi Everyone,
I wanted to query the support community to see if folks are encountering issues in deploying the 6880-X in VSS mode. We first looked at this soluition when it was running 15.1(2) SY2 as the recommened GA code. We ran into several issues:
1) VSL Link Timeout - Workaround:modify LMP timer or upgrade to 15.1(2)SY4
2) Port-member goes into suspendstate when using 1000BASE-SX - shut/no shut suspended interface
We ran into this and some other issues even with the eFSU upgrade process. So my question is have you run into similiar difficulties in running the 6880 in VSS mode. Did you go ahead and deploy? If so did you deploy with 15.1(2)SY4 (new Cisco GA code) or did you live with the state you are in?
Were there ways that you mitigated these issues?
Thanks,
Patnaik

Hi Reza,
Here you go. Just so you know I resolved the suspended port-member by OIR the optic that was displayed as a 10G interface.
lab6880#sh run inter te1/3/14
Building configuration...
Current configuration : 1546 bytes
interface TenGigabitEthernet1/3/14
no switchport
mtu 9216
no ip address
no ip proxy-arp
platform qos queue-mode mode-dscp
wrr-queue bandwidth 100 150 125 150 0 0 100
wrr-queue queue-limit 20 40 10 10 0 0 5
wrr-queue random-detect min-threshold 1 50 60 80 100
wrr-queue random-detect min-threshold 2 70 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100
wrr-queue cos-map 4 1 3
wrr-queue cos-map 5 1 4
wrr-queue dscp-map 1 1 1 2 3 4 5 6 7 8
wrr-queue dscp-map 1 1 9 11 13 15 16 17 19 21
wrr-queue dscp-map 1 1 23 25 27 29 31 33 35 37
wrr-queue dscp-map 1 1 39 41 42 43 44 45 47 49
wrr-queue dscp-map 1 1 50 51 52 53 54 55 57 58
wrr-queue dscp-map 1 1 59 60 61 62 63
wrr-queue dscp-map 1 2 0
wrr-queue dscp-map 2 1 10 12 14
wrr-queue dscp-map 3 1 18 20 22
wrr-queue dscp-map 3 2 26 28 30
wrr-queue dscp-map 4 1 24 32 34 36 38
wrr-queue dscp-map 7 1 48 56
rcv-queue dscp-map 1 1 1 2 3 4 5 6 7 8
rcv-queue dscp-map 1 1 9 11 13 15 17 19 21 23
rcv-queue dscp-map 1 1 25 27 29 31 33 35 37 39
rcv-queue dscp-map 1 1 41 42 43 44 45 47 49 50
rcv-queue dscp-map 1 1 51 52 53 54 55 57 58 59
rcv-queue dscp-map 1 1 60 61 62 63
rcv-queue dscp-map 1 2 0
rcv-queue dscp-map 1 3 16
rcv-queue dscp-map 2 1 10 12 14
rcv-queue dscp-map 3 1 18 20 22
rcv-queue dscp-map 3 2 26 28 30
rcv-queue dscp-map 4 1 24 32 34 36 38
rcv-queue dscp-map 7 1 48 56
macro description UPLINK
arp timeout 300
channel-group 100 mode active
end
lab6880#sh run inter te2/5/14
Building configuration...
Current configuration : 1546 bytes
interface TenGigabitEthernet2/5/14
no switchport
mtu 9216
no ip address
no ip proxy-arp
platform qos queue-mode mode-dscp
wrr-queue bandwidth 100 150 125 150 0 0 100
wrr-queue queue-limit 20 40 10 10 0 0 5
wrr-queue random-detect min-threshold 1 50 60 80 100
wrr-queue random-detect min-threshold 2 70 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100
wrr-queue cos-map 4 1 3
wrr-queue cos-map 5 1 4
wrr-queue dscp-map 1 1 1 2 3 4 5 6 7 8
wrr-queue dscp-map 1 1 9 11 13 15 16 17 19 21
wrr-queue dscp-map 1 1 23 25 27 29 31 33 35 37
wrr-queue dscp-map 1 1 39 41 42 43 44 45 47 49
wrr-queue dscp-map 1 1 50 51 52 53 54 55 57 58
wrr-queue dscp-map 1 1 59 60 61 62 63
wrr-queue dscp-map 1 2 0
wrr-queue dscp-map 2 1 10 12 14
wrr-queue dscp-map 3 1 18 20 22
wrr-queue dscp-map 3 2 26 28 30
wrr-queue dscp-map 4 1 24 32 34 36 38
wrr-queue dscp-map 7 1 48 56
rcv-queue dscp-map 1 1 1 2 3 4 5 6 7 8
rcv-queue dscp-map 1 1 9 11 13 15 17 19 21 23
rcv-queue dscp-map 1 1 25 27 29 31 33 35 37 39
rcv-queue dscp-map 1 1 41 42 43 44 45 47 49 50
rcv-queue dscp-map 1 1 51 52 53 54 55 57 58 59
rcv-queue dscp-map 1 1 60 61 62 63
rcv-queue dscp-map 1 2 0
rcv-queue dscp-map 1 3 16
rcv-queue dscp-map 2 1 10 12 14
rcv-queue dscp-map 3 1 18 20 22
rcv-queue dscp-map 3 2 26 28 30
rcv-queue dscp-map 4 1 24 32 34 36 38
rcv-queue dscp-map 7 1 48 56
macro description UPLINK
arp timeout 300
channel-group 100 mode active
end
interface Port-channel100
no switchport
dampening 20
mtu 9216
ip address 172.16.2.250 255.255.255.254
ip pim sparse-dense-mode
ip ospf network point-to-point
logging event link-status
logging event nfas-status
logging event bundle-status
load-interval 30
carrier-delay msec 0

Any Issues with Binding/Home Directories SnowLeopard Client to Tiger Xserve

Does anyone know if I can bind a Snow Leopard client to a Tiger Server?
Can I sync Home Directories of a Snow Leopard client to a Tiger Server?
Are there any major issues with Snow Leopard clients and Tiger Servers?
Thanks in advance.

Hi Ron Yochum;
You might have more luck if you ask over in the Server Froum instead of here.
Allan

Issue with Citrix Business Objects full client

Hi ,
I have issue with my database pasword being expired. I ran a recovery and it works fine for me.
Since we are using the citirx installation the bomain.key is available on the citrix server which is copied across the user profile when they are login into citrix server via the logon script.
I still could not find whether the log on script is correct or not can any one of you let me know what I can use to copy the bomain.key using citrix usrlogon.cmd script.
Regards,
Ramesh

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek

Issues with deploying BC4J/JSP applications on OC4J

To everyone who's been having problems deploying BC4J/JSP applications to OC4J.
We are aware that you're having problems deploying to OC4J, and we're working on them. OC4J was not available in time for us to add support for OC4J deployment to the JDeveloper 3.2.3 release. In addition there are some bugs in the first release of OC4J that have an impact on BC4J applications. This note describes the issues, and how we plan to address them.
Issue 1: Classpath problems
People have been getting "class not found" or "properties file not found" errors when they try to run their JSP. The answer is to make sure that all relevant archives and your JSP's .properties file are in the OC4J classpath - there's a note addressing the .properties file problem at http://technet.oracle.com:89/ubb/Forum99/HTML/000028.html. In general though, setting up the classpath can be tricky.
Issue 2: JSP TAG NOT RELEASED ON END TAG. SAME TAG IS REUSED.
This issue affects JSP pages whose behaviour relies on a tag instance being cleaned up as a result of release() being called.
Your tag will not be released, and subsequent instances of the tag will reuse the first instance, rather than instantiating a new
one.
Issue 3:JSP SCRIPTABLE VARIABLE NULL
A scriptable variable set in a tag cannot be accessed by a scriptlet. For example, this JSP code will throw a
NullPointerException, because the scriptlet cannot access the value of resultRow:
<jbo:Row id="resultRow" action="CURRENT" datasource="customer_vo1" />
<%
session.putValue("FIRSTNAME", resultRow.getAttribute("Firstname").toString());
%>Workaround: Add a line of code at the beginning of the scriptlet to explicitly get the variable's value from the page context, for
example:
<jbo:Row id="resultRow" action="CURRENT" datasource="customer_vo1" />
<%
resultRow = (oracle.jbo.Row)pageContext.findAttribute("resultRow");
session.putValue("FIRSTNAME", resultRow.getAttribute("Firstname").toString());
%>
What we plan to do
To address issue 1, we're currently testing a utility that installs the BC4J runtime libraries to OC4J, and provides a script to start OC4J with the correct classpath. We plan to post this by the end of this week, along with instructions for deploying a BC4J application to OC4J; deployment will be a lot simpler after running the utility.
To address issues 2 and 3, we're working on a second utility that installs BC4J runtime and provides a fix to the JSP compiler. We plan to post this second utility by the end of next week.
We do apologise for the problems you're having; please bear with us as we work on making it easier for you to deploy BC4J applications to OC4J.
Thanks
Blaise

Hi, I have been trying desparately to deploy
a simple example JDeveloper application for months and months.
I HAVE NEVER BEEN SUCCESSFUL IN DEPLOYING ANYTHING.
I don't know much about webservers and I am relying
on the instructions from JDeveloper help and this website.
I have already tried Apache, and WebLogic
because there are instructions in the JDev help.
No luck.
Now I am trying to use OC4J on 9ias because there are instructions.
I have read the instructions about how to install a BC4J
app on OC4J about 25 times, but I can't get this thing to work.
It works fine inside of JDeveloper.
I create a BC4J project using the scott
schema (just the dept and emp tables).
Then I create an empty project for my JSP client.
I choose JSP Application from the web
objects and it connects to my BC4J project.
As I say, when I run it in JDeveloper, there is no problem.
In the instructions for installing BC4J
in OC4J, it first says install JDev 3.2.3 and OC4J.
This is done, and it tested fine.
Then it says to install the deployment software.
No problem.
But when I deploy the app according to the instructions,
it just hangs (like Rick Wang's program did).
The main.jsp page loads and displays correctly,
but when I click on the links to the DeptView.jsp
or EmpView.jsp it just hangs.
Here is the entire batch file I'm using
to start OC4J: cd c:\oracle_9ias\j2ee\home
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\default-web-app\lib
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\classes
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\classes12.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordim817.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jndi.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbodatum12.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\al_BC4J.jar
java -cp C:\oracle_9ias\j2ee\home\orion.jar;%CLASSPATH%
com.evermind.server.ApplicationServer
pause
The file al_BC4J.jar contains my application.properties file
and my connections.properties file, as well as my business components.
All of the files referenced in my classpath are
present in my c:\oracle_9ias\j2ee\home\lib directory.
I noticed that Raghu's classpath contains a file called jdev.jar
So does the classpath of another fellow who says
he was successful in deployment (his name is Jeffrey Jackson).
I searched my JDev_3.2.3 for this file and found it nowhere.
I also searched my OC4J home and my 9iAS for this file and
found it nowhere.
It is nowhere on my C:\.
Is this file necessary?
I will also try removing my application.properties file
and my connections.properties file from my BC4J .jar file
and put them in a separate .jar file at the root level (as Raghu did).
However, Jeffery Jackson did not do this and says he was
successfull in deployment.
***DO I NEED TO JAR UP ANY OF MY THE FILES FROM the JSP
FOLDER IN JDevHome\myhtml???***
***or place them in the classpath?***
I have read over all of the discussions at: http://technet.oracle.com:89/ubb/Forum2/HTML/008232.html
and http://technet.oracle.com:89/ubb/Forum99/HTML/000028.html
many, many times.
Can anyone help me?

Issue with deployment

We tried deploying the component through JSPM, but JSPM is not working properly, so we are trying to deploy the software components through SDM.
     We have started to deploy the all the component together it is getting stuck after some time.
     We have started to deploy the component one by one it is still getting stuck after some time.
Can anybody please help us out.
Below is the log.
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[G:\usr\sap\NWB\DVEBMGS00\SDM\program\log\sdmlog20090413.log]/>
<!PATTERN[sdmlog20090413.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Apr 13, 2009 3:02:25 PM Info:
Apr 13, 2009 3:02:25 PM Info: ===============================================
Apr 13, 2009 3:02:25 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:02:25 PM Info: ===============================================
Apr 13, 2009 3:02:27 PM Info: SDM started successfully.
Apr 13, 2009 3:06:12 PM Info:
Apr 13, 2009 3:06:12 PM Info: ===============================================
Apr 13, 2009 3:06:12 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:06:12 PM Info: ===============================================
Apr 13, 2009 3:06:14 PM Info: SDM started successfully.
Apr 13, 2009 3:06:48 PM Info:
Apr 13, 2009 3:06:48 PM Info: ============================================
Apr 13, 2009 3:06:48 PM Info: =   Starting to execute command 'server'   =
Apr 13, 2009 3:06:48 PM Info: ============================================
Apr 13, 2009 3:06:48 PM Info: Starting SDM - Software Deployment Manager...
Apr 13, 2009 3:06:48 PM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0009.20060817110748.0000
Apr 13, 2009 3:06:49 PM Info: ====================================
Apr 13, 2009 3:06:49 PM Info: JControl is shutting SDM Server down
Apr 13, 2009 3:06:49 PM Info: ====================================
Apr 13, 2009 3:06:49 PM Info: Server finished sending back the answer of the ShutdownRequest.
Apr 13, 2009 3:06:49 PM Info: Shutting dispatcher down
Apr 13, 2009 3:06:54 PM Info:
Apr 13, 2009 3:06:54 PM Info: ============================================
Apr 13, 2009 3:06:54 PM Info: =   Starting to execute command 'server'   =
Apr 13, 2009 3:06:54 PM Info: ============================================
Apr 13, 2009 3:06:54 PM Info: Starting SDM - Software Deployment Manager...
Apr 13, 2009 3:06:55 PM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0009.20060817110748.0000
Apr 13, 2009 3:06:57 PM Info: SDM operation mode successfully set to: Integrated
Apr 13, 2009 3:06:58 PM Info: JStartupFramework is requesting to start the SDM Server.
Apr 13, 2009 3:06:58 PM Info: Start the SDM Server integrated in the JStartupFramework.
Apr 13, 2009 3:06:58 PM Info: Initializing Network Manager (50017)
Apr 13, 2009 3:06:58 PM Info: Starting SDM Server listening on port 50018
Apr 13, 2009 3:06:58 PM Info: SDM started successfully.
Apr 13, 2009 3:08:44 PM Info:
Apr 13, 2009 3:08:44 PM Info: ===============================================
Apr 13, 2009 3:08:44 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:08:44 PM Info: ===============================================
Apr 13, 2009 3:08:45 PM Info: SDM started successfully.
Apr 13, 2009 3:11:44 PM Info:
Apr 13, 2009 3:11:44 PM Info: ===============================================
Apr 13, 2009 3:11:44 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:11:44 PM Info: ===============================================
Apr 13, 2009 3:11:45 PM Info: SDM started successfully.
Apr 13, 2009 3:11:52 PM Info: Opened client connection to punitp02979 (IP address punitp02979/<ipaddress>, remote port 2561)
Apr 13, 2009 3:11:52 PM Error: Wrong password supplied - Request for Logon rejected. Remaining logon attempts until SDM server will be shut down: 2
Apr 13, 2009 3:11:55 PM Info: Close client connection to punitp02979/<ipaddress>, remote port 2561
Apr 13, 2009 3:12:04 PM Info:
Apr 13, 2009 3:12:04 PM Info: ===============================================
Apr 13, 2009 3:12:04 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:12:04 PM Info: ===============================================
Apr 13, 2009 3:12:05 PM Info: SDM started successfully.
Apr 13, 2009 3:15:02 PM Info:
Apr 13, 2009 3:15:02 PM Info: ===============================================
Apr 13, 2009 3:15:02 PM Info: =   Starting to execute command 'remotegui'   =
Apr 13, 2009 3:15:02 PM Info: ===============================================
Apr 13, 2009 3:15:04 PM Info: SDM started successfully.
Apr 13, 2009 3:15:11 PM Info: Opened client connection to punitp02979 (IP address punitp02979/<ipaddress>, remote port 2654)
Apr 13, 2009 3:15:11 PM Info: Request for Logon as admin accepted
Apr 13, 2009 3:16:14 PM Info: Loading archive 'G:\usr\sap\trans\EPS\in\BPMDMAPPLI06_4.sca'
Apr 13, 2009 3:16:27 PM Info: Actions per selected component:
Apr 13, 2009 3:16:27 PM Info: No action: Selected development component 'com.sap.mdm.uwl'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will not update currently deployed development component 'com.sap.mdm.uwl'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'0'.
Apr 13, 2009 3:16:27 PM Info: No action: Selected development component 'com.sap.mdm.uwl.config'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will not update currently deployed development component 'com.sap.mdm.uwl.config'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'0'.
Apr 13, 2009 3:16:27 PM Info: Initial deployment: Selected software component 'BP_MDM_APPLICATION'/'sap.com'/'SAP AG'/'1000.5.50.6.4.20090119093241''/'1' will be deployed.
Apr 13, 2009 3:16:27 PM Info: No action: Selected development component 'com.sap.pct.mdm.appl.masteriviews'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will not update currently deployed development component 'com.sap.pct.mdm.appl.masteriviews'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'0'.
Apr 13, 2009 3:16:27 PM Info: Initial deployment: Selected development component 'com.sap.pct.mdm.appl.packages.mdm_550'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will be deployed.
Apr 13, 2009 3:16:37 PM Info: Saved current Engine state.
Apr 13, 2009 3:16:39 PM Info: Starting: Initial deployment: Selected development component 'com.sap.pct.mdm.appl.packages.mdm_550'/'sap.com'/'SAP AG'/'5.50.20090119083803.0000'/'1' will be deployed.
Apr 13, 2009 3:16:39 PM Info: SDA to be deployed: G:\usr\sap\NWB\DVEBMGS00\SDM\root\origin\sap.com\com.sap.pct.mdm.appl.packages.mdm_550\SAP AG\1\5.50.20090119083803.0000\com.sap.pct.mdm.appl.packages.mdm_550.epa
Apr 13, 2009 3:16:39 PM Info: Software type of SDA: single-module
Apr 13, 2009 3:16:39 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Module) *****

Hi,
You could check the most recent logs under the SDM log directory:
<drive>:\usr\sap\<sid>\JC00\SDM\program\log
esp ones like sdm_*.err. These normally contain information about issues related to memory while loading the archives for deployment. We had memory issue resulting in SDM getting hung.
Hope it helps.
Regards,
Srikishan

Issues with Deployment to WLS Running on Virtual Box

Hi
JDeveloper 11.1.1.6, BPM 11.1.1.6, WLS 10.3.6
I just installed the SOA & BPM Development VM 11.1.1.6 available at http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html
Domain selected : dev_bpm_spaces
My Host OS is : Windows 7 Prof 64bit (Total 16GB Ram)
Memory allocated to VM : 8GB, Processors : 4
I am able to install everything, start the servers and access the consoles.
Everything looks fine.
But when I am trying to Deploy a BPM Application to the WLS in the VM, I am getting the below Exception. (Tried to Deploy from Local JDeveloper)
When I see the WLS Console -> Servers, I see the following servers.
AdminServer, bam_server1, UCM_server1, WC_Collaboration, WC_Spaces, IBR_server1
First, I started only the AdminServer and tried to Deploy the BPM Application, and I was getting the errors shown at the end.
Then I started the bam_server1, UCM_server1, WC_Collaboration, WC_Spaces servers on the VM and tried to deploy again. Then I got the error only for IBR_server1.
I cannot see the server IBR_server1 in the 'VM Control Center', but it is only shown in the WLS Console Servers.
So I tried to start the IBR_server1 from the WLS Console. I got the following errors
------For server IBR_server1, the Node Manager associated with machine LocalMachine is not reachable.
------All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
So my doubts are as follows
1. Only AdminServer is not enough to Deploy the BPM Applications? Why is it trying to connect to other servers while deploying?
When I created a separate Domain manually (local machine - not the VM), only with AdminServer I was able to deploy BPM Applications.
2. If IBR_server1 is also required, how can I start it?
3. I could not see the Node Manager start script in the VM (in the same folder where the start scripts for WLS are present : /home/oracle/bin)
Deployment Exception Logs
[03:51:51 PM] Deploying Application...
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'UCM_server1'. Deployment is deferred until 'UCM_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'UCM_server1'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'IBR_server1'. Deployment is deferred until 'IBR_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'IBR_server1'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'WC_Collaboration'. Deployment is deferred until 'WC_Collaboration' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'WC_Collaboration'.
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: [Deployer:149145]Unable to contact 'WC_Spaces'. Deployment is deferred until 'WC_Spaces' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'WC_Spaces'.
[03:51:54 PM] [Deployer:149193]Operation 'deploy' on application 'BookRequest' has failed on 'AdminServer'
[03:51:54 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application BookRequest on AdminServer.: .
[03:51:54 PM] Weblogic Server Exception: weblogic.application.ModuleException:
[03:51:54 PM] Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
[03:51:54 PM] See server logs or server console for more details.
[03:51:54 PM] weblogic.application.ModuleException:
[03:51:54 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
[03:51:54 PM] #### Deployment incomplete. ####
[03:51:54 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Thanks for any help
Regards
Sameer

Hi Vlad
Thank you for your response.
I did deploy the BPM Application to only AdminServer. Infact only AdminServer was shown in the JDeveloper Deployment Wizard.
Even then during the Deployment, I think it is somehow trying to connect to the other servers from AdminServer.
So I copied my BPM Application code from my local Windows to Linux in VM and deployed from JDeveloper in Linux with only AdminServer running.
It was still giving the same error.
Then I started all the Servers and Deployed the BPM Application from the JDeveloper in Linux, then it got Deployed Successfully.
Coming to the issue of the ORA-12505, I have Oracle DB Installed on my local system and is running on the same port 1521 as that of database in Linux in the VM.
I think that is that causing the issue. When I deploy from local JDeveloper, it is trying to connect to the local database which is on same port but different SID.
So it was giving that error.
So my learnings are
1. All the servers in the domain 'dev_bpm_spaces' should be running for deploying the applications.
2. We should deploy it from the Linux, expecially when we have local database server running.
3. I understand that the ports mapping between the linux and windows is already configured in the VM, but sometimes the BPM workspace is not accessible from the local windows.
So it is better to use the Linux for development, deployment and testing.
Thanks and Regards
Sameer

Urgent :- Issue with deploying application in Oracle Application server

Hello All,
Hope all of you are doing good ! I am facing an issue relating to deploying applications using the Enterprise manager. When i deploy the war file using Deploy WAR file option in the OEM, i get the following error -
Failed to deploy web application "gCube". Failed to deploy web application "gCube". . The configuration files for this OracleAS 10G instance are inconsistent with the
configuration stored in the repository. In order to protect the repository,
no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. The exception associated with this failed operation is:
{0}
. Please also check the logs located at
ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
the configuration files on disk. Some possible causes are:
* permissions on files
* file contention issues on Windows NT
* internal Oracle error
After resolving the problem that prevented DCM from updating the configuration
files, you may use the dcmctl resyncInstance command to resolve the problem.
Alternatively, you can stop and then restart the active dcmctl or EMD
process and resyncInstance will automatically be performed.
Root Cause: invalid stream header
Resolution: . invalid stream header
Please could you throw some light on this issue and also provide a resolution to fix this issue at the earliest ?
Your help in this , will be greatly appreciated.
Thanks and Regards,
Ramanan.

Hello All,
Could anyone assist me with a fix for the problem ?
Would appreciate it greatly.
Thanks.

Issues with deploying 802.1x (Sunray clients)

Similar Messages

Maybe you are looking for