Issues with Destination Selection in OS X 10.9.1 installer

To upgrade my Mac Book Pro (no retina display) from 10.9 Mavericks to 10.9.1, I downloaded OS X 10.9.1 from apple webpage "OS X Mavericks 10.9.1 Update". I opened the installer from downloads and followed the instructions indicated but at the "Select a Destination", it says OS X cannot be installed on Macintosh HD as it requires version 10.9 or later. Clearly, I had version 10.9 as checked in the "About this Mac" dialogue box. I would like someone to help troubleshoot this issue. Thanks in advance.

If you have 10.9 installed, it should be available under Updates in the App Store.
If not, try this link and click the blue View in Mac App Store button on the left:
https://itunes.apple.com/us/app/os-x-mavericks/id675248567?mt=12

Similar Messages

Issue with Exclude Selection in Bex

Hi all,
 I have created a query to display the Top 10 Customers.
Here I have excluded all the customers apart from the Top 10 since they differ
based on different regions. There are 4 different regions and the customers differ
for all of them. Here the issue being I dont get the exact percentage of Orders and
Sales because of these excluded values. Here I cant use include selection since i
need different top 10 customers for the 4 regions.
 How to compute percentage with Exclude Selection? Could anybody help?
Points would be surely assigned.
Regards,
Sunitha.R

Dear Anil,
 I have my Orders, Sales, percentage calculations in columns and the excluded
Top 10 customers in rows. I get the individual percentage values for each customer.
My scenario being :
Orders 06 : Values computed with Calculate Result as Summation - Properties.
Orders 07 : Values computed with Calculate Result as Summation - Properties.
Orders % : Here I have given Calculated Result as Nothing - properties.
 I get the individual percentages say :
 Orders 06 Orders 07 Percentage
Customer 1 : 12.1 91.2 75.5
Customer 2 : 7.6 7.9 104.3

Overall Result: 19.7 99.1 Wrong Value
 Considering the above example, total percantage is computed wrongly. The excluded value's total is not considered at all. Can you now give me your suggestion?
Regards,
Sunitha.R

Issue with Hierarchy selection in Filter area

Hi experts,
We have an issue with BEx query selection.
Structure of Quey
1. Filter Area
=> Characteristic Relations : Restriction condition with hierarchy
2. Rows
=> Display characteristic with hierarchy active
3.Columns
=> Formula with keyfigure using sign reverse of hierarchy (formula variance).
<symptom >
When I use context menu, "Keep filter value", with the displayed hierarchy node,
and drilldown with other characteristics, the result became wrong. Filter value I kept became inactive.
Workaround I found was like belows.
1. Remove sign reverse calculation in Formula.
2. Keep sign reverse calculation and move restriction condition with hierarchy in filter area TO default values.
I wonder this symptom was right technically or bug ocurred after version upgrade or something.
Thanks in advance.
BEx BI Addon 7.X(based on 710)/SP11 Revision 634

Hi
This depends on the logical database that the report is based on. Secondly I have experienced that the report variant overwrites the date selections and therefore it looks like that the dates are not parsed (which I think is your problem).
For e.g. logical PHP and PHPCE both the period and data dates are filled with the data selection from the portal. (check on the report attributes in SE38 which logical DB used) For e.g. PTRVP (travel) no date are passed at all in the call of the report!!
To make sure that the report variant isnu2019t overwriting I normally set the variant for the report to u201CSave field without valuesu201D for the date selection periods and then it isnu2019t filled by the variant.
Data selection period
Data selection period: Start
Data selection period: End
Employee selection period
Employee selection period: Start
Employee selection period: End
Regards,
Lars

Performance issue with view selection after migration from oracle to MaxDb

Hello,
After the migration from oracle to MaxDb we have serious performance issues with a lot of our tableview selections.
Does anybody know about this problem and how to solve it ??
Best regards !!!
Gert-Jan

Hello Gert-Jan,
most probably you need additional indexes to get better performance.
Using the command monitor you can identify the long running SQL statements and check the optimizer access strategy. Then you can decide which indexes might help.
If this is about an SAP system, you can find additional information about performance analysis in SAP notes 725489 and 819641.
SAP Hosting provides the so-called service 'MaxDB Migration Support' to help you in such cases. The service description can be found here:
http://www.saphosting.de/mediacenter/pdfs/solutionbriefs/MaxDB_de.pdf
http://www.saphosting.com/mediacenter/pdfs/solutionbriefs/maxDB-migration-support_en.pdf.
Best regards,
Melanie Handreck

RSA1 Document - Issue with "multiple selection" Characteristic

Hi,
I have the following issue with a web template showing monthly reporting results (act/plan/var) for a specific cost center broken down following a cost element hierarchy.
My purpose is to attach each month some comments and these comments are made at the query level, not for each individual cost element.
However, as explained in note 501593, when creating my document, I have to restrict my cost elements since they are regarded as "multiple selections".
I could go and limit from 6 to one single value through table RSODADMIN but I never know for sure that this single cost element would always show up in my query.
In RSA1 > document > properties of the comment, is there any way for me to go and input a range for my cost elements, instead of having to enter cost element by cost element ?
Thx
Stéphane

Hi,
I have the following issue with a web template showing monthly reporting results (act/plan/var) for a specific cost center broken down following a cost element hierarchy.
My purpose is to attach each month some comments and these comments are made at the query level, not for each individual cost element.
However, as explained in note 501593, when creating my document, I have to restrict my cost elements since they are regarded as "multiple selections".
I could go and limit from 6 to one single value through table RSODADMIN but I never know for sure that this single cost element would always show up in my query.
In RSA1 > document > properties of the comment, is there any way for me to go and input a range for my cost elements, instead of having to enter cost element by cost element ?
Thx
Stéphane

Performance issue with the Select query

Hi,
I have an issue with the performance with a seclet query.
In table AFRU - AUFNR is not a key field.
So i had selected the low and high values into s_reuck and used it in Where condition.
Still i have an issue with the Performance.
SELECT SINGLE RUECK
RMZHL
IEDD
AUFNR
STOKZ
STZHL
FROM AFRU INTO table t_AFRU
FOR ALL ENTRIES IN T_ZSCPRT100
WHERE RUECK IN S_RUECK AND
AUFNR = T_ZSCPRT100-AUFNR AND
STOKZ = SPACE AND
STZHL = 0.
I had also cheked by createing an index for AUFNR in the table AFRU...it does not help.
Is there anyway that we can declare Key field while declaring the Internal table....?
ANy suggestions to fix the performance issue is apprecaited!
Regards,
Kittu

Hi,
Thank you for your quick response!
Rui dantas, i have lill confusion...this is my code below :
data : t_zscprt type standard table of ty_zscprt,
 wa_zscprt type ty_zscprt.
types : BEGIN OF ty_zscprt100,
 aufnr type zscprt100-aufnr,
 posnr type zscprt100-posnr,
 ezclose type zscprt100-ezclose,
 serialnr type zscprt100-serialnr,
 lgort type zscprt100-lgort,
 END OF ty_zscprt100.
data : t_zscprt100 type standard table of ty_zscprt100,
 wa_zscprt100 type ty_zscprt100.
Types: begin of ty_afru,
 rueck type CO_RUECK,
 rmzhl type CO_RMZHL,
 iedd type RU_IEDD,
 aufnr type AUFNR,
 stokz type CO_STOKZ,
 stzhl type CO_STZHL,
 end of ty_afru.
data : t_afru type STANDARD TABLE OF ty_afru,
 WA_AFRU TYPE TY_AFRU.
SELECT AUFNR
 POSNR
 EZCLOSE
 SERIALNR
 LGORT
 FROM ZSCPRT100 INTO TABLE T_ZSCPRT100
 FOR ALL ENTRIES IN T_ZSCPRT
 WHERE AUFNR = T_ZSCPRT-PRTNUM
 AND SERIALNR IN S_SERIAL
 AND LGORT IN S_LGORT.
 IF sy-subrc <> 0.
 MESSAGE ID 'Z2' TYPE 'I' NUMBER '41'. "BDCG87
 stop."BDCG87
 ENDIF.
ENDIF.
SELECT RUECK
 RMZHL
 IEDD
 AUFNR
 STOKZ
 STZHL
 FROM AFRU INTO TABLE T_AFRU
 FOR ALL ENTRIES IN T_ZSCPRT100
 WHERE RUECK IN S_RUECK AND
 AUFNR = T_ZSCPRT100-AUFNR AND
 STOKZ = SPACE AND
 STZHL = 0.
Using AUFNR, get AUFPL from AFKO
Using AUFPL, get RUECK from AFVC
Using RUEKC, read AFRU
In other words, one select joining AFKO <-> AFVC <-> AFRU should get what you want.
This is my select query, would you want me to write another select query to meet this criteria..
From AUFNR> I will get AUFPL from AFKO> BAsed on AUFPL I will get RUECK, based on RUEKC i need to read AFRU..but i need to select few field from AFRu based on AUFNR....
ANy suggestions wil be appreciated!
Regards
Kittu

Issue with BEx selection screen

Hi Gurus,
We recently upgraded from BW 3.5 to 7.0. After the upgrade, while running the BEx queries the selection screen is not popping up and the query runs without the selections in it. Then the report errors out.... " Error Specify a value for variable XXXX".
Apparently, the query runs fine with selection when executed on WEB.
Did anyone of you come across with this issue..
Thanks
James.

Hi Guys
Run your query without the variable ,Try by removing the restrcition , if it is working fine without the variable then
I would suggest to check your variable once again like
      Check if 'Ready for input' check is checked for the respective variable,
       Remove the restriction ( drag out the variable )
      check your variable once again with all the setting and variable type
OR create a new varilable, if it is a customer exit type then check ABAP code written for populating values.
let me know if this helps,
cheers
sukhi

Issue with worksheet.Select(true) after hosting Excel window in WPF application

The issue is with Office 2013.
We are hosting excel workbook window in WPF application using HwndHost class. In overridden BuildWindowCore method of HwndHost class, we are creating a MDICLIENT Window and setting this MDICLIENT window handle as parent for Excel
main window handle and returning HandleRef object of MDICLIENT window handle from BuildWindowCore method.
Once HwndHost control is loaded, we are selecting sheet of excel in the loaded event of HwndHost control. The code for selection of sheet is given below.
dynamic workSheet =
this.excelApplication.Workbooks[1].Worksheets[sheetName];
this.excelApplication.Workbooks[1].Activate()
workSheet.Activate();
workSheet.Select(true);
The first time execution of
workSheet.Select(true)
halt for few seconds and then it throws exception “System.Runtime.InteropServices.ComException”
with message “The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))”.
But it executes successfully without delay on subsequent calls. Sometimes the execution halt for minutes on different Systems.
This absurd behaviour is seen only once in application instance life time and that too after excel window gets loaded in WPF application. If we execute
workSheet.Select(true)
before loading of window then it executes properly. Once
workSheet.Select(true)
executed for first time with exception, it executes successfully without delay on subsequent calls.

No, I dont have any macro in the sheet and it is happpening with all workbooks. The problem is consistent with all workbooks and also it throws exception only for first time in the application. If I execute it again in same application instance, it works
properly.

Animated GIF files, anyone had issues with the selected animation delay not saving as specified?

I am working on PSE 9 for Mac and have created my psd file with the layers.
Selected 'Save for Web' and chose GIF as the file format.
Ticked 'Animation', then from the bottom right hand corner under 'Animation' I have ticked 'loop' and in the 'delay' drop down selected 2.0 (so 2 seconds).
When I check the file in 'preview in' web it shows the file flashing faster than 2 seconds a frame. I also checked it by uploading it onto my website and it is flashing faster than 2 seconds.
I have saved the file several times to check. It appears that even though you are given a choice that is automatically saves the delay at the auto-populated delay speed of 0.2 seconds.
Thoughts anyone?

As far as i know, the frame delay has been broken
for several versions on the mac pse.
Since version 4 maybe?
You can comment on this post and hopefully adobe will fix it in pse 10.
http://feedback.photoshop.com/photoshop_family/topics/photoshop_elements_9_mac_frame_delay _in_save_for_web
MTSTUNER

Issue with treetable selection listner in ADF

Hi Experts,
we are working on JDEV 11.1.1.2.
here we have a tree table.
Inorder to get the selected row data in a tree table we are using following code in backing bean.
public void qaTableSelectList(SelectionEvent selectionEvent) {
String selectedQaCode ="";
RichTreeTable treeTable = (RichTreeTable)getQaReasontreeTable();
RowKeySet _selectedRowData = treeTable.getSelectedRowKeys();
Iterator rksIterator = _selectedRowData.iterator();
while (rksIterator.hasNext()) {
List key = (List)rksIterator.next();
JUCtrlHierBinding treeTableBinding =
(JUCtrlHierBinding)((CollectionModel)treeTable.getValue()).getWrappedData();
JUCtrlHierNodeBinding nodeBinding =
treeTableBinding.findNodeByKeyPath(key);
selectedQaCode = nodeBinding.getAttribute(0);
//use this var "selectedQaCode".
Initailly this code are working fine for a long time
Now suddenly its stopped working.
some time its returning the selected value some times not.
What will be the issue can any one suggest alternate solution.
regards
Gayaz

It changed about 2-3 weeks ago.
I haven't done anything to it at all. I just drag an mp3/wav, chop it, save it and I'm done, so I'm not sure why it would all of the sudden change
It's also noteworth that I reinstalled it several times and it hasn't fixed it. Could it be left-over files from the initial install that weren't unistalled and remained, which affected the reinstall? If so, where would I find them?

Issue with table selection in popup window in oaf

Hi ALL,
I have a popup seach window in that i am displaying search data in table region below, from that i need to select the number of rows and clicking on a button the same selected rows should display in another page.
i tried with using RowSetIterator but not able to achive this , please help me out on this.
Thnaks

Can anyone please help me on this
Thnaks

Issue with table selection and display the seleted rows in another page as a table data

Dear ALL,
I have a requirement as below:
I have a custom OAF page having one button, on pressing the button it will open a popup window, in that i am doing search operation and data would populate in table region below.
Then from the table i am doing multiple selection of rows and i have a button, on pressing the button the seleted rows should display in the base page where i called this popup window and popup window should close.
so i am able to perform multiple selection of row from the table but how i can display the seleted rows in my base page and how i can close the poup window after the seleted rows displayed in the base page, please help me on this.
Thanks
Deb

Hi,
For navigation data from one page to another you can use a hashmap that contains the parameters.
// processFormRequest()
HashMap hsp = new HashMap(1);
hsp.put("myParam", "myParamVal");
pagecontext.setForwardURL("MY_FUNCTION", (byte)0, null, hsp,true, "N", (byte)0);
You can then retrieve this parameter in processRequest() via:
pagecontext.getParameter("myParam")
//Code for redirect to base page with commit
Refer to the setPostToCallingPage method, from OADialogPage Class how to make the dialog page action buttons submit back to the calling page. In the example, the OK button commits the changes on the dialog page and the NO button rolls back the changes.
OADialogPage dialogPage = new OADialogPage(OAException.*, mainMessage, null, "", "");
dialogPage.setOkButtonItemName("okButton");
           dialogPage.setOkButtonToPost(true);
           dialogPage.setNoButtonToPost(true);
           dialogPage.setPostToCallingPage(true);
           dialogPage.setOkButtonLabel(yes);
           dialogPage.setNoButtonLabel(no);
Thanks,
Dilip

Issue with variable selection

Hello friends
I have created a sample iView which has a BW query. I have attached a variable form to the input of the Query and a table view to its output. However when I am deploying the iView, I cannot see a selection list for the variable and neither any data in the table

So you have a form in which the user selects value from a drop-down list and once user submits the table should be populated with appropriate data.
Steps:
Start--FormDataServiceTable--
End
1.Place a form , next a Data Service and a Table which pulls data from this data service.
2.Add a Dop-Down control to the form and configure if its a Static or Dynamic as needed
3. Connect the Form OUT port to DataService IN port(drag and drop) , select the connector/line which was created and click configure.
4. Map the Drop-Down control to appropriate column (This is available in bottom right of the screen)
5.Click on the table and select the columns which you would like the Table to have.
6.Save and Run.
This should run as desired

Issue with AT SELECTION-SCREEN ON event

Hi Experts!!
In the below code, p_jan, p_feb are showing as blank though they are filled in. Is this how this event works?
PARAMETERS: p_categ TYPE zpycateg,
 p_jan TYPE sy-datum,
 p_feb TYPE sy-datum.
AT SELECTION-SCREEN ON p_categ.
IF NOT p_jan IS INITIAL.
ENDIF.
Please help me out.

Hi
That event works for P_CATEG, here other parameters of the screen can't been seen.
If you want to do a validation has to check several parameters of a selection-screen you should use the event AT SELECTION-SCREEN.
Anyway if you think it's better the event AT SELECTION-SCREEN ON <screen field>, the values of other fields can be picked up bu fm DYNP_VALUES_READ
AT SELECTION-SCREEN ON P_CATEG.
DATA: T_FIELDS TYPE STANDARD TABLE OF DYNPREAD WITH HEADER LINE.
T_FIELDS-FIELDNAME = 'P_JAN'. APPEND T_FIELDS.
T_FIELDS-FIELDNAME = 'P_FEB'. APPEND T_FIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = SY-REPID
 DYNUMB = SY-DYNNR
 TABLES
 DYNPFIELDS = T_FIELDS.
READ TABLE T_FIELDS WITH KEY FIELDNAME = 'P_JAN'.
IF NOT T_FIELDS-FIELDVALUE IS INITIAL.
ENDIF.
Max

Issue with At selection-screen output

Hi,
I tried in SDn to find suitable thread atlast i am creating query here.
My requirement is: i have two radiobuttons.
when i click first radiobutton it hasto show one selection screen it contains pernr and bukrs
when i click second radiobutton it has to show second selection screen . This screen includes personnel area and Wage type
Thanks,
Maheedhar

Use "AT SELECTION-SCREEN OUTPUT" and distinguish them with "MODIF ID"
Code flows like this:
PARAMETERS r_online RADIOBUTTON GROUP g1
                     USER-COMMAND ex DEFAULT 'X'.
PARAMETERS r_batch RADIOBUTTON GROUP g1.
PARAMETERS r_down RADIOBUTTON GROUP g1.
PARAMETER: p_bukrs LIKE t024e-bukrs OBLIGATORY
                   DEFAULT 'US60'.
SELECT-OPTIONS: s_werks FOR marc-werks.
PARAMETER: p_vari TYPE slis_vari MODIF ID md5.
PARAMETERS: p_a_file LIKE rlgrap-filename
                     DEFAULT '/transfer/us6/ZUS6MM04_MatPlt'
                     MODIF ID md2.
PARAMETERS: p_h_file LIKE rlgrap-filename
                     DEFAULT '/transfer/us6/ZUS6MM04_MatPlt_HDR'
                     MODIF ID md2.
PARAMETERS: p_hfile1 LIKE rlgrap-filename
                     DEFAULT '/transfer/us6/ZUS6MM04_MatPlt_HDR'
                     MODIF ID md3.
PARAMETERS: p_hfile2 LIKE rlgrap-filename
                     default 'C:\Transfer\US6\ZUS6MM04_MatPlt_HDR.txt'
                     MODIF ID md4.
* AT SELECTION-SCREEN EVENTS
AT SELECTION-SCREEN OUTPUT.
PERFORM modify_screen.
*&      Form MODIFY_SCREEN
FORM modify_screen .
LOOP AT SCREEN.
    IF r_online = 'X'.
      IF screen-group1 = 'MD3' OR
         screen-group1 = 'MD4' OR
         screen-group1 = 'MD2'.
        screen-active = '0'.
      ENDIF.
    ELSEIF r_batch = 'X'.
      IF screen-group1 = 'MD3' OR
         screen-group1 = 'MD4' OR
        screen-group1 = 'MD5'.
        screen-active = '0'.
      ENDIF.
    ELSEIF r_down = 'X'.
      IF screen-group1 = 'MD2' OR
        screen-group1 = 'MD5'.
        screen-active = '0'.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDFORM.                    " MODIFY_SCREEN

Issues with Destination Selection in OS X 10.9.1 installer

Similar Messages

Maybe you are looking for