Issues with dropouts on A band on 1142 LWAPP
Having an issue where clients connecting to A radios on an 1142 drop off every 2 and a half minutes. Running off a WLC 4402 running code 5.2.178.0. Issue cannot be replicated on an 1131 or 1242 running A radios. Opened a TAC case but interested to know if this is a problem seen elsewhere.
OK, finally found this one in the Bug list. Bug CSCsw20879 covers exactly what we were seeing. Weird we were only getting it on the 1142AP's and not the 1131 or 1242 AP's. Either way, the fix of updating the channel scan under RRM->General on the a radios to be 'country channels' and not 'all channels' appears to have fixed the issue.
Not that TAC helped me find this though :).
Similar Messages
-
Hi. I am having an issue with music on my IPod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one with only Islands on the Coast, and the other having Islands on the Coast with 3 other songs. If I delete the album with only one song from my IPod, it deletes the song from the other "album" as well. If I go to "All Songs" by Band of Horses, it only shows one Islands on the Coast, so it is not a duplicate issue. Also, in Itunes, it only shows one album. I just recently updated to iOS5 on my 4th Gen IPod Touch, if that helps.
Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Sudden banding issue with Mac and new Canon printer, already called tech
Good morning fellow Elementites.
I have been using Photoshop Elements 12 on my MacBook Pro 13 inch, running Maverick OS, printing to HP Photosmart Premium all-in one with no banding issues, ever.
I did want to upgrade my printer and monitor so I purchased the Canon Pixma Pro 100 and a new external LG IPS monitor to view the PSE program.
I also purchased ColorMunki Display to calibrate the monitor. Everything is operational with the recommended settings for color etc.
I printed a .tiff image and a .jpg through the PSE print function. The images that looked perfect on the new monitor and Macbook monitor printed with banding. I called Canon tech support. The man had me perform a few tasks to make sure the printer was operating correctly. We printed test sheets from the printer and they were all as they should be.
He the said he NEVER prints from PSE. He edits in PSE but prints using Canon's EZ share or print or whatever it's called, doesn't matter cause I do NOT LIKE IT AT ALL. Not to mention it is just another step in the work flow. Not to mention that I paid good money for a photo editing program of high quality and I want to use ALL the features.
He said the problem isn't the printer but the printing software instructions TO the printer via the Mac OS printer system, or something like this is what he said. He also had me download some other updates and driver files. He then had me remove the printer from my printer list and then add it back.
He then had me print the .jpg image, (it only prints .jpg which is annoying as heck,) and it came out SO BEAUTIFUL I ALMOST CRIED
I want to print this quality THROUGH PSE. Does anyone have a clue as to what to do to resolve the issue? None of the suggestions in other threads from the past seem appropriate enough.
Eager to hear,
Regards.I have returned home and have copied down all the settings so that I may post them here before I do any more fiddling. Maybe something glaring will be spotted before I start changing things.
I opened an image in PSE 12.
I chose from the PSE menu at the top of the monitor, FILE >PRINT
A window appears with my photo and boxes and such: 1. Select Printer> CANON PRO 100-SERIES (The other printer isn't concern now).
Select Paper Size and Orientation, no problems with this or any of the other settings in this window.
I then select MORE OPTIONS button at bottom of window.
Another window opens.
There are 3 options listed on the left hand side PRINTING CHOICES which it is automatically on, CUSTOM PRINT SIZE which I haven't needed yet, and COLOR MANAGEMENT.
I select COLOR MANAGEMENT.
COLOR HANDLING is set to PRINTER MANAGES COLOR.
IMAGE SPACE is listed, not in any box, as sRGB IEC61966-2.1
PRINTER PROFILE is listed in a box that is grayed out and not selectable, as CANON IJ COLOR PRINTE...
RENDERING INTENT is set in a selectable box as RELATIVE COLORMETRIC.
(There is a little mssg below all this that reminds me to remember to enable color management in the printer preferences dialog. I was never able to find this action and after doing some research I read that this mssg is a boo boo as the function is automatic in MAC running Maverick, supposedly).
I then click OK and the box goes away.
I then click the PAGE SET UP button.
A window titled PRINT opens.
The Printer selection box says CANON PRO=100 series.
The next box always confuses me because nothing in the list appears to pertain to me when I want to print my photos. It is the Presets box.
I believe FAST PRINTING ON PLAIN PAPER is always showing when I open this window. But I don't want that so I always look to see if there is something I should choose that applies. I don't know what they mean by DEFAULT SETTINGS in this case. LAST USED SETTINGS would be ok if that was what I wanted each time I printed. FAST and FINE on Plain Paper? I have been assuming they mean plain copy paper so I don't choose that. SAVE CURRENT SETTINGS AS PRESET, I don't choose that because I haven't been sure of the settings. And the SHOW PRESETS does me no good becuase you can't change anything in there.
PAPER SIZE, not an issue at the moment.
LAYOUT button is my next stop, by now I am exhausted
I look at COLOR MATCHING which shows CANON COLOR MATCHING as the selected method. (The other choice is COLOR SYNC but I don't know anything about that one and haven't been told to change it.)
PAPER HANDLING & COVER PAGE, N/A at this time.
QUALITY & MEDIUM. I choose my paper type, paper source, print quality which for my photos I select HIGH. I don't touch COLOR OPTIONS because that is scary looking. And BORDER and MARGIN I have no issue with.
I then hit SAVE and the window closes.
Then I select PRINT in the lower right of the window that has my photo in it and from which I acessed all these other things.
Phew. So, can anyone tell me if they see anything wrong here, PLEASE.
Regards,
P. -
Logic issue with MS Band Sleep Tracking
If I do a both ends of the candle night, so hit the sack at 2am on the 10th of the month, then try to make amends that night by turning in at 10pm then the Band tracker records this as no sleep at all on the 9th, but 2 sleeps on the 10th. Well that just
nonsense. The logic isn't hard and I can guarantee the dev team understand. So this is BUG and it would be rather nice to see it fixed before Azure ML gets confused about my sleep patterns and predicts my early demise.I have had the exact same problems, only I have not cycled so I can't relate to that complaint. I have had an issue with my units of Distance now displaying incorrectly. Prior to last week, my units were in Miles, and now they are in Kilometers. I don't see anywhere to change that in the Settings.
Also, I contacted Joe in Support yesterday, and he had me reset my SmartBand and my phone (equivalent of rebooting) to see if that fixed anything. It did not. Then he instructed me to uninstall the Sony Apps on my phone, and re-install them. I did that, and it worked temporarily. All my historical data was now displaying correctly, until this morning when I woke up, and my sleep is back to being > 100 hours for last night, but my historical data still seems to be fine. The problem seems to be during the initial capture of the data. When I am on my timeline and I move the time forward, at midnight, the increments increase exponentially, rather than normal speed. Prior to midnight, all is fine.
I have a Nike+ Fuel Band and got the Sony SWR10 primarily for Sleep Monitoring. Now I am unable to do anything with the data because it is not accurate. Also, I'm an avid runner and would appreciate the ability to change from KM back to Miles...this is a basic necessity.
Thanks,
Chad
Atlanta, GA -
I have had so many issues of late with both OS X Mavericks and iOS 8, that I am looking to change. Bluetooth dropouts that infuriate me despite swapping to brand new batteries, cleaning terminals, adding alfoil to hold the batteries more snuggly, etc; to FCP X constantly beach-balling (and I have 32GB RAM running with OS X running from an SSD); to itunes refusing to play any of my content on my new iPhone 6+. I have erased the phone twice and reloaded content after setting it up as a "new phone".
Is this April, and I have missed something?
Come on Apple, you have become an absolute JOKE. iCloud not working, iOS 8 not working, Bluetooth dropouts, I can't verify my new iPhone with iCloud Keychain for some unknown reason (wants me to reset and retry all the time).
If I wanted this cr@p, I would have stayed with W7....
Anyone else having issues with the new OSs?Hi Bob,
Thanks for taking the time to have a look - EtreCheck output:
EtreCheck version: 1.9.15 (52)
Report generated 5 October 2014 4:09:54 pm AEDT
Hardware Information: ?
Mac Pro (Mid 2010) (Verified)
Mac Pro - model: MacPro5,1
2 2.66 GHz 6-Core Intel Xeon CPUs: 12 cores
32 GB RAM
Video Information: ?
ATI Radeon HD 5870 - VRAM: 1024 MB
LED Cinema Display 1920 x 1200
DELL 1703FP 1280 x 1024 @ 60 Hz
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 5:47:40
Disk Information: ?
HL-DT-ST DVD-RW GH41N
M4-CT512M4SSD2 disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
OSX SSD (disk0s2) / [Startup]: 511.12 GB (146.33 GB free)
Recovery HD (disk0s3) <not mounted>: 784.2 MB
WDC WD1001FALS-41Y6A0 disk2 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted>: 209.7 MB
1TB Internal (disk2s2) /Volumes/1TB Internal: 999.86 GB (312.63 GB free)
Hitachi HDS722020ALA330 disk1 : (2 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
DRAFT (disk1s2) /Volumes/DRAFT: 1.29 TB (975.89 GB free)
Alt Backup (disk1s3) /Volumes/Alt Backup: 711.95 GB (52.38 GB free)
Recovery HD (disk1s4) <not mounted>: 650 MB
ST3000DM001-1CH166 disk4 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk4s1) <not mounted>: 209.7 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
ST3000DM001-1CH166 disk3 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted>: 209.7 MB
disk3s2 (disk3s2) <not mounted>: 3 TB
Boot OS X (disk3s3) <not mounted>: 134.2 MB
USB Information: ?
Wacom Co.,Ltd. Intuos5 touch M
Generic Mass Storage 4.03 GB
S.M.A.R.T. Status: Verified
EFI (disk7s1) <not mounted>: 209.7 MB
Mac 4GB (disk7s2) /Volumes/Mac 4GB: 3.68 GB (1.07 GB free)
Apple Inc. Display iSight
Apple Inc. Display Audio
Apple Inc. Apple LED Cinema Display
OWC Express USB2 160.04 GB
S.M.A.R.T. Status: Verified
EFI (disk6s1) <not mounted>: 209.7 MB
160GB HD (disk6s2) /Volumes/160GB HD: 159.7 GB (42.54 GB free)
Seagate External 3 TB
S.M.A.R.T. Status: Verified
EFI (disk9s1) <not mounted>: 314.6 MB
3TB Time Machine (disk9s2) /Volumes/3TB Time Machine: 3 TB (3 TB free)
Seagate FA GoFlex Desk 2 TB
S.M.A.R.T. Status: Verified
EFI (disk8s1) <not mounted>: 209.7 MB
FCP (disk8s2) /Volumes/FCP : 2 TB (1.52 TB free)
BUFFALO HD-LBU3
C-Media Electronics Inc. USB Microphone
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB-PS/2 Optical Mouse
Firewire Information: ?
LaCie 2big triple (button) 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk10s1) <not mounted>: 209.7 MB
FW 1TB (disk10s2) /Volumes/FW 1TB: 999.87 GB (701.87 GB free)
Configuration files: ?
/etc/sysctl.conf - Exists
/etc/hosts - Count: 37
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] at.obdev.nke.LittleSnitch (4212 - SDK 10.8) Support
[not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) Support
[not loaded] net.osx86.kexts.GenericUSBXHCI (1.2.7) Support
[loaded] net.osx86.kexts.NECUSBXHCI (2.2.7) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons: ?
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.bombich.ccc.plist Support
[failed] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.fxfactory.FxFactory.helper.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
[loaded] org.cindori.TEAuth.plist Support
Launch Agents: ?
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ReceiverHelper.plist Support
[running] com.citrix.ServiceRecords.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[running] com.wacom.wacomtablet.plist Support
[running] net.culater.SIMBL.Agent.plist Support
User Launch Agents: ?
[not loaded] com.digitalrebellion.PreferenceManagerAutoSave.plist Support
[not loaded] com.facebook.videochat.[redacted].plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] com.redgiantsoftware.updater.plist Support
[not loaded] com.Wondershare.TunesGoWatchDemo.plist Support
User Login Items: ?
iTunesHelper
TrimCheck
Avira
Internet Plug-ins: ?
Default Browser: Version: 537 - SDK 10.9
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 4.1.10329.0 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.1.0 Support
AdobePDFViewer: Version: 10.1.1 Support
EPPEX Plugin: Version: 3.0.5.0 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ?
ApplyLUTPane Support
CUDA Preferences Support
Flash Player Support
ProCutX Server Support
ArcanaStartupSound Support
WacomTablet Support
Time Machine: ?
Skip System Files: YES - System files not being backed up
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
OSX SSD: Disk size: 476.01 GB Disk used: 339.73 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 3 TB
Total number of backups: 1
Oldest backup: 2014-08-08 12:41:49 +0000
Last backup: 2014-08-08 12:41:49 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 476.01 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
1% WindowServer
0% fontd
0% softwareupdated
Top Processes by Memory: ?
590 MB mds_stores
524 MB com.apple.IconServicesAgent
229 MB com.apple.WebKit.WebContent
197 MB softwareupdated
164 MB Safari
Virtual Memory Information: ?
24.40 GB Free RAM
5.09 GB Active RAM
707 MB Inactive RAM
1.79 GB Wired RAM
429 MB Page-ins
0 B Page-outs -
I am having an issue keeping a good connection on the 5ghz channel with my new dual band airport extreme. Let me explain my current network. I just purchased a new APE. Airport utility shows it as AirPort Extreme Dual Band II with 7.5.1 firmware. I have it running a 2.4ghz G network and a 5ghz N network. In the basement I have my older APE which is a Airport Extreme N with gigabit ethernet (7.4.2 firmware). It is set to join 5ghz network from the dual band and then acts as a hub to my gaming Windows PC, ps3, and xbox. The 5ghz network is very spotty, it will work fine and I can browse away for about a minute and then it will just stop. My laptop and ipad will still show full signal strength, safari will just end up timing out while waiting. If I move them over to the 2.4ghz G network everything works fine, except of course file transfers which are slow because of being on the G network. Also should the older router be on a higher version number of firmware? I have tried checking for updates on both.
+Something seems off.+
Absolutely.
At 2.4 GHz, the high noise level indicates that you are experiencing interference from another wireless network (do you see other networks in iStumbler?), cordless phones (could be yours or your neighbors', a nearby wireless security system, microwave interference...lots of possibilities.
iStumber may not display "hidden" networks. Most modern routers (Apple included) allow users to "hide" their network, so it's possible that you may be experiencing interference from a wireless network that you cannot "see".
If you have cordless phones, you might want to pick a time when you can power them and their base stations completely down for a few hours to see if the wireless signal improves and noise drops on your network. Not much you can do about a neighbor's cordless phone or security system.
Experiment with different channel settings on your 2.4 GHz wireless as well.
Most cordless phone will not interfere with 5 GHz. I can't explain why your 5 GHz signal is so low..and the noise high..if you are close to the router and have line of sight between devices. Try a few different channel settings on 5 GHz as well.
Let us know what you find. -
Issues with cisco 1242 aironets
We are currently experiencing and issue with the 1242 AG Wireless Access Points. We have have them configured as 1 Root Access point and 3 Repeaters. The repeaters seem to be experiencing frequency interference issues. The Root AP is using antenna model 2506 and the repeaters 1728's.
What happens is when the repeaters are first started up, they see / communicate to the root access point fine, but within 5 minutes they stop communicating. If we manually set the channel to something different, they see each other for 5 - 10 minutes then eventually disappear and cannot be ping'd or seen with a sh cdp nei.
We have tried various combinations of settings so far. Have tried channel 1 - 13 and the least conjested frequency mode. It usually settles on channel 8 when we put it in that mode. But it is the same sceneario each time. All 3 repeaters show up almost instantly after a channel change, but slowly disappear in less than 10 minutes.
Here is our config:
Version
Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 16-Sep-09 19:06 by prod_rel_team
ROM: Bootstrap program is C1240 boot loader
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
ROOTAP uptime is 2 days, 3 hours, 14 minutes
System returned to ROM by power-on
System image file is "flash:/c1240-k9w7-mx.124-21a.JA1/c1240-k9w7-mx.124-21a.JA1"
cisco AIR-AP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ112782K9
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1C:58:B1:72:2E
Part Number : 73-10256-06
PCA Assembly Number : 800-26918-05
PCA Revision Number : A0
PCB Serial Number : FOC11262N5Z
Top Assembly Part Number : 800-29233-01
Top Assembly Serial Number : FCZ112782K9
Top Revision Number : A0
Product/Model Number : AIR-AP1242AG-E-K9
Configuration register is 0xF
Root AP Config
Current configuration : 1987 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ROOTAP
no aaa new-model
dot11 syslog
dot11 activity-timeout client maximum 120
dot11 activity-timeout repeater maximum 300
dot11 ssid WIRELESS
authentication open
authentication key-management wpa
guest-mode
infrastructure-ssid
username user privilege 15 secret 5 password
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid WIRELESS
antenna gain 5
parent timeout 10000
channel 2417
station-role root access-point
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.2.10 255.255.255.0
no ip route-cache
ip default-gateway 192.168.2.1
ip http server
ip http authentication local
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
privilege level 15
logging synchronous
login local
stopbits 1
line vty 0 4
privilege level 15
logging synchronous
login local
stopbits 1
line vty 5 15
privilege level 15
logging synchronous
login local
stopbits 1
end
Repeater Config
Current configuration : 1764 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname REPEATER03
no aaa new-model
dot11 syslog
dot11 ssid WIRELESS
authentication open
authentication key-management wpa
guest-mode
infrastructure-ssid
username user privilege 15 secret 5 password
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid WIRELESS
antenna gain 5
parent timeout 10000
station-role repeater
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.2.13 255.255.255.0
no ip route-cache
ip default-gateway 192.168.2.1
ip http server
ip http authentication local
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
privilege level 15
logging synchronous
login local
stopbits 1
line vty 0 4
privilege level 15
logging synchronous
login local
stopbits 1
end
We are wondering if you have any tips to get around this.
Also, should these access points be able to handle ~200 clients? How close to the root access point should the repeaters be placed? I basically just go until my signal gets low and put a repeater within that range. Could vary from 30-60 meters away.
ThanksAlso, should these access points be able to handle ~200 clients?
APs, in theory, can handle >1,200 clients. In theory. In practice, Cisco recommends between 12-25 clients. Imagine if you have, say, 50 clients and they are trying to access the network on a 100 Mbps FastEthernet connection. That slows them down, right? But consider wireless as a broadcast. One talks and the rest listens. -
New HH3 - Issues with Kodak Printer and iPhone 3GS
Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase) -
Mini Display Port to VGA Adapter Having Issues with My Samsung 40" HDTV
So I ordered the brand new 15" i7 Macbook Pro along with the Apple wireless magic mouse and wireless keyboard after having bought my HDTV (went on a bit of a spree) with the intention of using the TV as a monitor for couch surfing. But, upon hooking up the adapter to the TV, my macbook's screen flickered between that blue transitionary screen and it's desktop screen. It did this for a few minutes. I jiggled the cable thinking that there was a loose connection somewhere as that was the problem with my previous mini DVI to VGA adapter from Apple. I did a little research and it turns out that they released a firmware update in 2009 for such a problem. I downloaded the update and attempted to install it but it did not determine that there was even an adapter connected. So, I proceeded to call Apple, they man was very calming to talk to and make all of my problems seem to melt away, but there were no solutions reached. He thought that maybe my TV either had a problem or was incompatible with the adapter (incompatible with a VGA connection? can you get any more analoge that that?). So, here I am, the adapter seems not to have a problem with regular monitors but I am still experiencing intermittent disconnects from my TV. I still, superstitiously jiggle the connection whenever I have dropouts but that really doesn't seem to be the issue here (or at least I hope not because that could mean port issues with my new laptop). Any suggestions? I noticed, after changing some settings on my TV, in an attempt to remedy this, that the TV was displaying the picture funny, I turned the TV off and then on again and it fixed the problem. That being said, perhaps I just need to turn my TV completely off when I'm not using it, as I have been just letting it go into standby. Maybe it needs a restart every so often much like my computer. I don't currently have data to support that theory as I just recently tried turning it off, but, since then have not had dropouts.
You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits. -
Any suggestions on how to fix installation issues with iPhoto & iMovie on used Mac mini?
I bought a used, mid 2011, mac min. The selller deauthorized all his applications and resotred it to factory settings for me. When I received it, I added myself as an administrator and deleted the dummy user the seller had created after restoring the OS. The first thing I wanted to do was install applications I already have on my iMac (also running OSX Lion). It would not install iPhoto or iMovie. It said these applications were assigned to a different apple id, the previous owner. I decided to erase the hard drive and reinstall Lion myself. I ran into some snags (due to my internet connection) and had to use recovery thumb drive, but it worked.
I successfully re-installed Lion on the newly formatted hard drive.
I still cannot install iPhoto and iMovie. It just give me an error now. Couriously, it installed Garage Band just fine. I haven't had any other issues with other applications I purchased on my other iMac.
Anyone have any suggestions, besides purchasing iPhoto and iMovie on the mac mini?Ethernet cord connected to the router solved it. This is exactly what I had to do when I reinstalled the operating system. For some reason my wireless internet is highly inreliable. It drops out constantly. I've always had my iMac hard wired to the router, but I'll have to figure out a fix for this Mac mini. I can't have a 30ft ethernet cord running through the middle of my basement. Thanks.
-
Outlook 2013 Not Responding and Offline Address Book Issues with Office 365
Around 3 months ago I setup a small business with Office 365 for email. They have 10 PCs, all running newly installed Windows 7 Professional 64-bit, eight with Office 2013 and two with Office 2010. All are connected to a local domain (Server Essentials
2012) with a single internet connection through a new TP-LINK router. Each user logs into their own PC only.
The network runs perfectly, internet connection is good but there seems to be RANDOM, INTERMITTENT issues with email not being SENT from Outlook every so often. Email will sit in the outbox for up to an hour sometimes before, eventually, being sent. Incoming
email seems ok, although this is more difficult to tell. At others times, email will be sent instantly - the size of the message and any attachments makes no difference.
The issue has happened at some point on every one of the PCs but no particular PC/user seems worse than any other. When email is stuck on one user's PC it can still be sent ok by other users at the same time - so the internet connection is not down. Users can
can always login to the OWA service ok and iPhones etc. all sync ok even when email is stuck in the Outbox.
To debug the issue I have worked on one particular user's PC and carried out the following changes -
Changes that made no difference
I have checked the router. A SPI firewall is available on the router but this is switched off.
I have changed the MTU on the router with no effect.
There are no unsual add-ins to Outlook
Outgoing email virus scanning is disabled
Outlook is NOT integrated with Lync
The OST file is around 1.7 GBytes is size.
I have recreated the Outlook profile twice but this made no difference
Switched OFF "Cached Exchange Mode" - this made things worse !
The Outlook address book is set to \Offline Global Address List
I have disabled with Windows firewall on the client PC - no change
I have adjusted the KeepAliveTime for packets in the registry of the PC to 20 minutes
Changes that reduced the frequency of "Not Responding"
I have changed the Outlook automatic Send/Receive time from 30 to 10 minutes - this seemed to help
Possible Related Problem
I have attempted to download the offline address book manually - this hangs at "Copying offline address book template file" in the Send/Receive dialog and there a NO OAB files in the data file location on the PC.
So the only measure that has so far "helped" has been the Outlook Send/Receive time change - now set to 10 minutes. Even so, Outlook will occasionally go "Not Responding" for 30 minutes or more (no windows active - only option
is to close and reopen Outlook).
There does seem to be a problem with the Offline Address book. I can download this ok for this user on my home PC (Outlook 2010) but this will not download manually on the work pc with Outlook 2013 (despite following all the debug steps above).
On work PC I can see literally hundreds of "Schannel" errors in the Windows System event logs -
Error - Event 36888 Schannel
The following fatal error was generated :10
The internal error state is 10
These errors occur every 2-4 minutes continually all the time Outlook is running. When Outlook is closed the "Schannel" errors stop !
Can anyone suggest what else to try, please ?
I have already investigated this issue on the Office 365 Community Forum, and the Outlook forum and they suggested that it was a client (i.e Outlook) issue and that I should post here for further information.
Thanks for reading !An update to this problem.
I brought one of the office PCs back to my home network and connected it up there. With no changes to the PC I was immediately able to download the Offline Address Book without errors.
This suggests to me that there must be some problem with the internet connection or router setup in the office environment.
The router is a TP-LINK W8970. The internet connection is PPPoA. I have seen some suggestion that an SPI firewall can cause issues. This router has an SPI firewall but this feature is disabled on the router.
While investigating this issue I have frequently been connected remotely to an office PC - sometimes for up to an hour or more. During these periods I have not experienced any connection dropouts so the actual internet connection seems to be ok (i.e. it is
not dropping out).
However, something seems to be preventing the Outlook client from connecting properly with the Office 365 Exchange server in the office environment - or something is dropping the connection to Outlook. Does anyone know of any router settings that might affect
this ?
I could try changing the office router but I do not have a spare available. Can anyone suggest a reasonably low cost, currenbtly available router that they know definitely works in the Office 365 environment so that I could buy this for test purposes ? -
Home Sharing issues with iPhone 6 Plus
Hi guys,
I'm having problems with streaming music and video on my iPhone 6 plus from my Macbook Pro (mid 2010 model) using iTunes' Home Sharing . I am able to stream without any issues using my iPhone 4S and my Apple TV, however.
I am using iTunes version 12.0.1.26, iOS 8.1.2, and OSX 10.9.5.
Using my 6 plus, I am able to connect to my iTunes library, both music and video. Album art shows up for music but no cover art for the videos. So, all in all, I am able to see the contents of my library.
However, when I try to play songs, a couple things may happen. First, nothing plays for about 10 seconds; then a second or two of the song plays followed by silence again, appearing as if it's buffering. Second thing that may happen is that a second or two plays immediately followed by silence. If I press next to play the next song, what usually happens is that nothing plays, although the song title does appear.
As seen in this video, I don't have any issues with my WIFI connection or internet speed, as demonstrated using the iPhone 4S and Apple TV.
I have no clue as to why this is happening.
Hopefully someone could shed some light with this issue. Please feel free to comment. I'm open to and appreciate any suggestions while Apple tries to find a solution. Thanks.UPDATE
So, after working with the guys at Apple, they we were to provide a solution. Now I have no problems using Home Sharing with my iPhone 6 Plus!!!
(I should add that I have the Linksys Advanced Dual-Band N Router (E2500))
The issue was fixed by giving one of the wi-fi channels a different name, thus splitting the channels into 2.4 GHz and 5 GHz. Then, I connected my iPhone to one channel (2.4 GHz) and my MacBook Pro to the other channel (5GHz). In this configuration, I have had no issues streaming my music and video.
It seems that the problem is some kind of interference between both devices when using the same channel (i.e., when both the 2.4 GHz and 5 GHz channel share the same name). -
Issues with iTunes Home Sharing using iPhone 6 Plus
Hi guys,
I'm having problems with streaming music and video on my iPhone 6 plus from my Macbook Pro (mid 2010 model) using iTunes' Home Sharing . I am able to stream without any issues using my iPhone 4S and my Apple TV, however.
I am using iTunes version 12.0.1.26, iOS 8.1.2, and OSX 10.9.5.
Using my 6 plus, I am able to connect to my iTunes library, both music and video. Album art shows up for music but no cover art for the videos. So, all in all, I am able to see the contents of my library.
However, when I try to play songs, a couple things may happen. First, nothing plays for about 10 seconds; then a second or two of the song plays followed by silence again, appearing as if it's buffering. Second thing that may happen is that a second or two plays immediately followed by silence. If I press next to play the next song, what usually happens is that nothing plays, although the song title does appear.
As seen in this video, I don't have any issues with my WIFI connection or internet speed, as demonstrated using the iPhone 4S and Apple TV.
I have no clue as to why this is happening.
Hopefully someone could shed some light with this issue. Please feel free to comment. I'm open to and appreciate any suggestions while Apple tries to find a solution. Thanks.UPDATE
So, after working with the guys at Apple, they were able to provide a solution. Now I have no problems using Home Sharing with my iPhone 6 Plus!!!
(I should add that I have the Linksys Advanced Dual-Band N Router (E2500))
The issue was fixed by giving one of the wi-fi channels a different name, thus splitting the channels into 2.4 GHz and 5 GHz. Then, I connected my iPhone to one channel (2.4 GHz) and my MacBook Pro to the other channel (5GHz). In this configuration, I have had no issues streaming my music and video.
It seems that the problem is some kind of interference between both devices when using the same channel (i.e., when both the 2.4 GHz and 5 GHz channel share the same name). -
ADF Faces - issue with Portal and af table
I wonder if anybody could help me with a problem we are experiencing with running our ADF Faces app inside a portal (NOT Oracle Portal). We are using the af table tag with the rows attribute set as follows:
<af:table emptyText="No items found"
rows="10" banding="row"
bandingInterval="1"
binding="#{backing_ModuleSearchReg.table1}"
id="table1"
var="row">
What this does is if we have more than 10 rows to display it will display
a table header that has a label 'Previous 1-10 of nnn' Next 10. However, when you click on 'Next 10' it produces a Javascript error.
When we run the app outside of the portal we do not get this problem.
I believe this is related to known issues with JSF and Javascript inside a 'framed' web page. But if anybody help me with this or point me to a resource that can help it would be very much appreciated.
Many Thanks in advance.
ChrisHi,
I remember a similar issue with inner frames that should be fixed in JDeveloper 10.1.3.3. The problem was that the ADF Faces JavaScript did not get the correct document root.
Frank -
Apple TV Router 104bits encryption connection issues with laptop
Hi, we have set up a wep-104 encrypted office Wifi (AppleTV with TimeCapsule router) N-band network, WPA2-PSK (AES encryption). Although I set it up as WPA2-PSK, on a wifi sniffer I ran its identified as wep-104 for some reason (104bits, that is).
This wifi has a problem with one of our computers, which uses an external USB wifi adapter, TP-Link TL-WN7200ND USB adapter, and driver version TL-WN7200ND_WHQL_100730 (I also tried TL-WN7200ND_100513). This computer connects to all other wifis I can throw at it, 64 bit and 128 bit with no prpblems, so I know the adapter is not the issue. After inserting the password, the adapter just "thinks" for a while and then just goes back to showing "X" on its icon (the computer is using XP but that is irrelevat I think). The adapter has the latest firmware and drivers. Is it possible to switch AppleTV to a more often used 128bit security (it could be this adapter just can't work with 104bit).
ThanksUpdate: if I choose an 8 character password for WEP Transitional security network instead of a 13 character one for WEP/WPA2 Personal, it works. Why is that? thanks
Maybe you are looking for
-
Name of the Month not showing correctly in calendar
I m facing a strange problem with the calendar, on the home screen calendar icon date & day is showing correct but when i view the full month calendar then its not showing the right month --- it is showing all the days of the March 1st to 31st correc
-
Headless Pismo needing pre-login screens
Hi, I have a Pismo without a display that has an external monitor attached. With the help of forum members I am able to have full functionality of this machine once I log in. However, I am hoping to find if there is a way to get a displayed screen pr
-
Having issues with export of a table
Hi All, We have a very large table which we want the output as .txt or .csv.How should we use loadercli.Thanks.
-
RH8 HTML - WebHelp: Topic link in TOC goes to wrong topic
I just got my upgrade to RH8 today, and I must say it has NOT been a pleasant experience so far. This issue is just one of many I will probably be posting in the next few days. I have one RH file that I use to create two versions of help text, using
-
List of changes in Equipment and Functional Location
Dear Colleagues? Is there an easy way to get a list of all Functional Location and Equipments changed in the last week? Thanks and Regards