Issues with embedded report not recursively finding data in a sub folder

Hi:
Am stuck. Have an InfoPath form that is published to a SharePoint forms library. The users put completed forms in sub folders in this library: example
Library: my forms
folder1
folder2
Used a hyper link inside of the InfoPath form and the report will run when the form is in the root of the library but does NOT search folders beneath the root.
Have not been able to find a working example.
Anyone have any ideas?
Thank you
Chuck

Hi,
Could you please share your form with me ([email protected]) so that I can investigate this issue? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

Similar Messages

Issue with sharing icon not in Finder (1st gen MB & newest MBP)

I've searched the forums and am not sure what to look for.
Problem: unable to find my friend's late model MBP (Leopard) in my finder. i own a first gen MB with the Snow Leopard upgrade.
1. i've checked the file sharing access on both computers and we have it checked to be able to access (read & write) to both our drop boxes.
2. i have no issues connecting to the network, we are the only 2 computers sharing a network through the Airport Express. (i had no problems with OS 10.4 Tiger)
3. i use to open the finder window to connect to his MBP to put files into his dropbox but am now unable to find his computer in my shared section of my finder window. i went to "networks" to look also but found 0 items also.
i tried going to the terminal window in utilities and did the CMD + SHIFT + K but didn't see anything here either.
He is able to see me in his shared section of his finder and was able to access my drop box with no problems.
What am i doing wrong? how can i access his MBP computer or any other computer (PC based) if i am unable to connect or see anything in my finder side tab?
i read i can manually do it but am unsure how to obtain the other person's IP. or is there a simpler method to do this?
Thanks for everyone's help.

How would i find the other computer's IP address? Sorry I'm not familiar with how to look for that. thanks for the info i appreciate the help.
Hopefully Apple comes through with an update that fixes all the bugs in Snow Leopard.

Performance Issue with VL06O report

Hi,
We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
Thanks,
Surya

Sreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
     appending corresponding fields of table lt_select
     where     vbeln in ct_vbeln
     and     posnr eq posnr_initial
     and     parvw eq 'SP'
     and     lifnr in it_spdnr.
I don't see any issue with this query. I give more info later

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

Variable input values issue with Portal reports in WAD

Hi Gurus,
We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
Regards,
Yada

Hi Hari,
Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
Regards,
Yada

Has anyone had issues with their itunes not coming up?

Has anyone had issues with their itunes not coming up? I keep getting error message 13014. I just bought a new classic ipod and am not sure if this is the problem.

Hi
Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
http://www.apple.com/ipodclassic/specs.html
3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
HTH?
Tony

Issues with BEx Reports in SAP Enterprise Portal

Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
Vikash

HI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash

User issue with a report supply planning area today monthly

this is a support issue....the user has an issue with a report supply planning area today monthly. The user is getting wrong values in BW, it sums PLOs and POs under production (config). for eg: BW says we are producing 46T while in R/3 we have 4T.

The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Issues with photos/videos not uploading in chronological order..

I have been having issues with Adobe Bridge not uploading my photo/video files (from a CF card) in chronological order. When uploading I select to rename the files by shot date + 01.. etc. For photos the first image then becomes the last image after uploading, and for video files everything is out of order. Not sure why as the only other thing I have selected to add is copyright info. Also having issues with Bridge not converting raw files to DNG (which has led me to use Adobe DNG Converter - not terrible, but hopefully there is a reason?). I think it is a problem with Bridge, as photos uploaded to my website - something completely non-Adobe related are also then thrown out of order.. so it seems to be an issue with files that have come through Bridge at some point. Any advice is much appreciated.

I just noticed that iTunes is now accepting 'some' videos. They are all the same file type (mp4), but iTunes is just randomly choosing which videos it wants add to the Library & not.
I'm still not getting any results when it comes to the Photos.
... and one last thing ... only random songs are displaying the album art on the iPod. Yhey ALL appear in iTunes. If i restore my iPod & re-load everything, some of the songs that DID have artwork appearing on the screen now don't.
This is really messed up! Wonder if the eventual Vista-compatible iTunes will fix this problem ...

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Issue with Scheduled Reports

Having an issue with running reports. We have created the folder under C:\Program Files\Cisco CRS Historical Reports\reports ..to resolve a bug but now the user gets the attached error message every morning. Any ideas?
Thanks,
Joe

Hi Joe
No attachment?
Aaron

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

No problems here.
Edit...
My IOS-7 is on an iPod Touch.

We have been having some issues with Email notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay

Anyone have an issue withe airplay button not being available?

Anyone have an issue withe airplay button not being available?

Since the last pair of updates, my game camera won't pan around in any adventure level, leaving many sub levels off screen. This is happening in all community adventure levels as well as my own on my moon. Also can't seem to decorate my adventure levels without experiencing major glitches, especially with changing the materials. The updates fixed a lot of stuff, but it seems like they trashed some things too.

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Issues with embedded report not recursively finding data in a sub folder

Similar Messages

Maybe you are looking for