Issues with embedding large HD video files within keynote

I posted something over at the FCP forum, but Keynote is starting to get problematic when I import and embed 1 to 2 GB HD video files that have background music.
1 time Keynote did a hard hang during a project save and lost 20 or so slides although the thumbnails were still showing.
Trying to save the project is starting to also become a real chore.
I am exporting 3-5 minute long HD video clips shot at 1080i and then deinterlaced in FCP.
HDV already reduces image sharpness it is. I want to keep the quality/footage sharpness up as high as possible. The selected video size ends up being about 1065 x 569, but that is a size, not a sharpness, one of the things I always found confusing when referring to it as "resolution".
So what settings would you suggest when outputting via FCP?
Any Keynote settings or workflows advised?

You could try uploading them to a joint dropbox account that they could then download them from....but how fast it is will depend on the internet connection available.

Similar Messages

Premiere Pro audio sync issues with 48khz audio on video file and 44.1khz audio on external audio

So, I recorded video and audio on my Canon 5D Mark II at 1080p, 23.976 fps, and 48khz, 16-bit Stereo audio. And I used a Zoom H4 to record an mp3 audio file at 44.1khz Compressed. When trying to sync the audio in Premiere Pro CC, the audio slowly loses sync over time. I already tried to convert the 44.1khz mp3 file to 48khz in Adobe Audition. But that didn't fix the problem. Any ideas?

There's always time-stretch changes to the audio file with "keep pitch unchanged" checked, I suppose. Mind you, I've heard of people doing it but haven't done it myself. There's other possible options I'm sure. There's been quite a few threads here on time-sync issues over time.

RC 8.6 Issues with Nikon D810 NEF RAW files

RC 8.6 does not correctly process Nikon D810 NEF RAW files. See the following blog article for some details:
Nikon D810 vs D800E ISO Comparison

This is very helpful. My current workflow, until ACR 8.6 and LR fully support the Nikon D810, are to use the DNG converter and import the resulting D810 DNG files into my LR catalog.
I have not yet tried this (traveling right now), but I assume I can still make a custom profile using the X-Rite ColorChecker Passport and it's associated software for my D810 using the RC 8.6 DNG files. This is my normal workflow for all of my other cameras in LR, but the process is direct from native RAW and not DNG (to produce the custom profile).
Sent from my iPad
On Jul 28, 2014, at 6:51 PM, "max.wendt" <[email protected]> wrote:
RC 8.6 Issues with Nikon D810 NEF RAW files
created by max.wendt in Adobe Camera Raw - View the full discussion
Until Lightroom gets D810 support, you will need to use the ACR plugin in order to see the profiles. The DNG Converter always uses Adobe Standard, and embeds it into the DNG. Lightroom 5.5 doesn't have the D810 profiles.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image athttps://forums.adobe.com/message/6592335#6592335
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: [https://forums.adobe.com/message/6592335#6592335]
To unsubscribe from this thread, please visit the message page at [https://forums.adobe.com/message/6592335#6592335]. In the Actions box on the right, click theStop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/thread/416458?tstart=0.

Weird issue with loading and playing videos externally - URGENT

I have a project I'm working on where I have an FLV Playback
component on the stage, with thumbnail buttons below to create sort
of a video gallery. When the user clicks on each of these buttons,
a different FLV file will load in the FLV Playback component, which
currently works GREAT when previewing in Flash.
I'm using the following code to link the button input with
the FLV component on the stage:
btn_Audi.onRelease = function() {
videoPlayer.contentPath = "Audi.flv";
btn_Bridgestone.onRelease = function() {
videoPlayer.contentPath = "Bridgestone.flv";
However, when I go to Publish to a folder to upload to the
web, I go to click on one of the thumbnails and the video never
loads. I get the controller bar sitting there scrolling the
barber-shop style colors, but no video loads. I've checked,
re-checked, and triple-checked to make sure ALL the necessary files
are in the directory (since it seems like it's having some issue
finding or loading the video file(s)). I'm completely out of ideas
and need to know if anyone has any thoughts as to what it could be.
Oh, and should it matter that I have this videoPlayer
component "buried" inside the project, as in Scene 1 > movieClip
> movieClip > videoPlayer ? I wouldn't think it would... but
maybe?
Thank you so much in advance -
Michael

Hello Michael,
Did you ever resolve why your videos weren't loading? I'm
having exactly the same problem right now, and it's driving me
nuts. The application runs fine on my development network, but only
displays my loader bar on the live web server. I've triple-checked
everything I can think of, but everything seems fine.
Any advice or anything you might remember would sure be
appreciated.
Best,
Paul

Large online video file (youtube) will freeze the lion

while loading the large online video file, the os x lion will freeze, only mouse pointer will move~~

In addition to file format, video codec matters. The iPhone can only play videos encoded with H.264. If you import the .mov or .mp4 file into iTunes, you can select the file then Advanced menu > Create iPod or iPhone Version, and try uploading the converted file to your FTP site.

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

I got the following for Adobe Reader that there was an issue with it. C:\Program Files (x86)\Adobe\Reader 11.0\Reader\NPSWF32.dll file How do I fix this? Thanks.

How can I fix this problem. I got the following for Adobe Reader that there was an issue with it. C:\Program Files (x86)\Adobe\Reader 11.0\Reader\NPSWF32.dll file

Try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then reinstall.

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.

Rtorrent: issue with DL large files ( 4GB) to NTFS

Using latest rtorrent/rutorrent: every time I DL a large >4GB file with rtorrent to the NTFS drive it shows it downloading the whole file MB by MB, but when I go to hash check (via rutorrent), there's only a partial percentage DLded. Say if I DL a 4.36 GB .mkv file, I hash check and only 10% is done ~400MB or about 6 minutes of the video.
Oddly:
If I do ls -l --block-size=MB, the file shows normal 4GB+ size.
If I do ls -s, file appears to be only a few hundred MB.
If I DL to my root ext4 drive, there's no issue unless I change the save path of the torrent in rutorrent and elect for the files to be moved to the NTFS drive.
I've transferred large files with 'cp' from another NTFS to this NTFS with no issue.
I thought the problem was rutorrent plugin autotools, but I removed it from my plugins folder and the problem persists.
Permissions:
I have all the relevant directories in /etc/php.ini open_basedir: the user/session, the mounted drive, and /srv/http/rutorrent
I did #chown -R http:http /srv/http/rutorrent
http is a member of the group with NTFS drive access
the rutorrent/tmp directory is changed to be within /srv/http/rutorrent
This is a pesky issue that I didn't have with my last arch install using the same general set up.
I DL to an NTFS formatted drive and mount it the same way I did before: ntfs-3g defaults,auto,uid=XXXX,gid=XXXX,dmask=027,fmask=037
My rtorrent user is the uid (owner) and is in the group that has access to the drive (along with my audio server user and http)
I run rtorrent in screen as the rtorrent user
I imagine this is an issue with rutorrent?
Any tips before I reformat the whole 4TB to ext4?
EDIT: the issue is definitely isolated to rtorrent. I manually added large size torrent using rtorrent, it completed. I then hash checked (in rtorrent) and again only ~10% was shown as complete.
EDIT2: It is most definitely not a permissions issue. Tried this again without mount permissions options and the same thing happens.
Last edited by beerhoof (2015-01-30 22:05:57)

I'm afraid I don't understand the question.
7.2 now correctly parses the Canon XF .CIF sidecar files to determine whether the media is supposed to be spanned or not. This has been a feature request that has been finally addressed to work correctly.
(It also was there in 7.1 & previous, but had limitations: the performance wasn't as good, there had been issues in the past with audio pops at cut points, and it required that the Canon XF folder structure remain intact, ie if you copied the media to a flattened folder structure, it would fail to do the spanning correctly.)
If you are looking for a means to disable the automatic spanning, simply removing the .CIF files will achieve that. Although i'm not sure I understand why you're looking to do that. Most people *want* spanning to happen automatically, otherwise you're forced to manually sync spanned media segments by hand.

Embedded audio and video files with Acrobat x Pro

Can an audio or video file be embedded in a document with Acrobat x Pro & opened with Adobe Reader xi?

You can place video or sound files onto the pages of a PDF file using the Multimedia button on the Tools Pane > Content Panel. The result is called a Rich Media Annotation, and will play back on the desktop versions of Adobe Acrobat and Adobe Reader.
The files have to be compatible with Flash Player, so videos need to be in H.264, FLV or F4V, and audio files in MP3.

Issue with generating large pdf file using cfdocument tags in CF9

We are in the process of upgrading our code to use cf9 and the cfdocument tag (from the old cfx_pdf tags). We have successfully gotten one piece of our code to work but the file size of the pdf that we are generating now is huge in comparison to what it was using the CFX_PDF tags. (I.E. with the new code the file is 885 KB in comparison to the old code generating only a 11KB file). We are not embedding fonts so the Fontembed = "no" didn't work for us. We do have all of our images as .jpgs but unfortunately due to the volume of images that we have we can not switch all these files into another format. Is there is way to shrink or optimize the pdf file size that we are generating?
Thanks so much for your help.
Claudia

We are in the process of upgrading our code to use cf9 and the cfdocument tag (from the old cfx_pdf tags). We have successfully gotten one piece of our code to work but the file size of the pdf that we are generating now is huge in comparison to what it was using the CFX_PDF tags. (I.E. with the new code the file is 885 KB in comparison to the old code generating only a 11KB file). We are not embedding fonts so the Fontembed = "no" didn't work for us. We do have all of our images as .jpgs but unfortunately due to the volume of images that we have we can not switch all these files into another format. Is there is way to shrink or optimize the pdf file size that we are generating?
Thanks so much for your help.
Claudia

Issue with deleting 0 byte video mp4 file from iphone 5S

The issue happens when I tried to sync my iPhone 5s photo to iPhone on my Mac. The two 0 byte video file just cannot be sync and iphoto will prompt the error. "Error downloading image. Photo cannot import your photos because there was a problem downloading an image."
I try to use "Image Capture" on the mac to delete it as suggested by many users, but it did not allow me to select the 2 files at all. Could any guru kindly render their kind assistance to this problem. Thanks.

in case you ended up on this thread via web search (as I did today),
I'll post how I solved it when it happened to me.
the issue was caused by importing 3 months of camera roll using Image Capture (I do not use iPhoto anymore).
after importing all the items, I selected them all in the Image Capture window and clicked on "delete".
a few ghost files (video only) were left behind, all of them 0 Bytes.
tried disconnecting/restarting the device but the issue persisted.
no way to delete the video references from the mac.
had to go in camera roll and manually delete them all.
using "select' on the top right you can tap them and delete after they are all checked.
hope this helps someone
u.

Issue with embedding and usage of worklist TF in ADF app

In our application, we have embedded the worklist TF from "adflibTasklistTaskflow.jar" in our jspx page. Below is the page def binding for the TF
<taskFlow id="taskListtaskflowdefinition1"
taskFlowId="/WEB-INF/taskList-task-flow-definition.xml#taskList-task-flow-definition"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="federatedMode" value="false"/>
<parameter id="showActionDropdown" value="true"/>
<parameter id="showViewFilter" value="true"/>
<parameter id="showAssignmentFilter" value="true"/>
<parameter id="showStatusFilter" value="true"/>
<parameter id="showSearchControl" value="true"/>
<parameter id="showTaskTabs" value="false"/>
<parameter id="displayColumnsList"
value="title, state, creator, assignedDate"/>
</parameters>
</taskFlow>
Issue
When we try to re-assign the claimed task in the worklist, it opens up a re-assign popup - "Identity browser".
Within Reassign Screen:
- Select "All" value on the dropdown
- Enter a last name on the text field. I.e. "Kristoffersson"
Or enter an email address.
- SOA error will appear as mentioned below
"Search failed with an error. Service error.. Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services"
This issue is not seen for any other option in the drop down other than "All" (e.g. "users", "group", etc. it is displaying all corresponding search results of users from LDAP)
Below are the library which we have added in our UI project:
I. BPM worklist components
1) adflibTasklistTaskflow.jar
2) adflibWorklistComponents.jar
II. BPM Workflow
1) bpm-services.jar
2) bpm-infra.jar
III. BPM taskflow
1) bpm-workflow-datacontrol.jar
IV. BPM services
1) bpm-services.jar
Is there anything missing from the uptake? Please suggest.
Also, is there any uptake document for the same (embedding human worklist into a page)?

Hi,
I remember a similar issue with inner frames that should be fixed in JDeveloper 10.1.3.3. The problem was that the ADF Faces JavaScript did not get the correct document root.
Frank

Issues with attaching an Adobe Story File to a clip in PPCC

Hi,
I read through a lot of stuff and watched a couple videos but still have an issue with the attachment.
What I do is I go into the Metadata and assign my scene number (3.01). I export the script as a .astx. File/right click, attach story file-> select the file go back to metadata and it tells me nothing found. This is really frustrating what's wrong with it?

Worked this one out, I had the bullet set on file and not staging

Exporting to QT on Keynote with embedded narration or audio files doesn't work

When I create a Keynote presentation, I often publish them for viewing after the presenttion. I have been making presentations for a long time and never had luck with Keynote using narration. When you edit a narration, it first "appears" to erase everything from the point you choose to edit forward.   However, when you finalize the presentation and export to QT as a movie (yes the edits sound fine when you are using keynote itself) EVERY PREVIOUSLY RECORDED TAKE on each slide will playback at the same time making the audio incomprehensible. I'm using a 2013 2.3 GHz quad core i7 with 16 GB DDR3 and the newest Keynote 6.01 2013.   Narration has NEVER worked properly on any previous version, and still doesn't.
I had some advice to try recording QT audio and adding to the slide. Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
Keynote is simply a buggy inferior product for use in recording presentations as far as I am concerned, and I am very very disappointed in Apple for not figuring these issues out.   It's not a new product, and it's not as if most educators are not participating in on-line posting or sharing their work as movies for later viewing by students.
I'd appreciate hearing what others do to work around these issues before heading back to Powerpoint or having to make complex i Movies with slides as images and adding qt narration to the movies.   Keynote claims to do this... it just but I've never encountered an apple product with more bugs.

I had some advice to try recording QT audio and adding to the slide. Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
The problem Keynote has is that the sound and image content are not locked together which causes out of sync errors. This is why many users choose video editing applications when using sound in the presentations, as they have both image and audio tracks to sync sound properly together.
Start a new presentation to remove the previous sound recording, Keynote is holding onto the other sound files.
Add the graphic items to each slide and one sound file to each slide for the voice over
1 - In Inspector > Transitions; use start transitions automatically and set each transitions delay to the duration of the individual sound file.
2 - In QT export, set Fixed Timing and delete the value in the duration box, QT will then use the custom timings for each individual slide.
This procedure does work exactly as needed, Iv used this for nearly 6 years using 4 different versions of Keynote.

Issues with embedding large HD video files within keynote

Similar Messages

Maybe you are looking for