Issues with External Speakers

So I was playing with my iPhone today since there was a blackout in my area. I decided to listen to some music and play it off my external speakers since I didn't carry earphones with me. I listened carefully and it sounded like my sound was a bit..."off". So I covered the right speaker, and the music sounded fine. Then I put my finger over the left speaker, and there was the "off" sound I kept hearing. It seems the right speaker doesn't play the music as loud as the left one does because I covered the left speaker, and the music suddenly sounded muffled, though it sounded fine when I covered the right speaker. I wanted to know if somebody could address this problem with a solution before I decide to make an appointment with the Genius Bar about it.
On a side note, my battery life seems fine if I leave it on standby. but when I begin to use the phone, the battery life seems to be just a tad short of "normal". For example, if I were using an offline app (i.e. games), after 5 minutes, I could see that my battery has already dropped by 1%. Is this normal?
Thanks for listening, hope somebody could help me with these problems.
-Greg

The iphone has only one speaker:
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
The other is the mic.

Similar Messages

  • Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers and my iTunes wifi sync isn't working. Anyone else having the same problems?

    Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...

    Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.

  • Issues with External Hard Drives

    I hope this is the right forum for this one - please give me a steer if not! I've also posted it in 'Dock and Finder', but this forum seems equally appropriate, if not more so.
    I'm getting repeated issues with External Hard Drives, including ones that I have been using successfully for months/years, suddenly failing to mount and then becoming 'unknown device' through the firewire branch of 'About This Mac'.
    I've just bought a new hard drive on the grounds that the others had somehow failed, and the same problems are emerging. I decided to Repair Permissions on my iMac's internal drive, and am copying the results below, from repair runs conducted yesterday and today:
    YESTERDAY'S REPAIR PERMISSIONS RESULTS
    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Macintosh HD appears to be OK.
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
    Permissions differ on "Library/Preferences", should be drwxrwxr-x , they are drwxrwxrwx .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "sbin/umount" has been modified and will not be repaired.
    Warning: SUID file "bin/rcp" has been modified and will not be repaired.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
    Permissions repair complete
    TODAY'S PERMISSIONS REPAIR RESULTS
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "sbin/umount" has been modified and will not be repaired.
    Warning: SUID file "bin/rcp" has been modified and will not be repaired.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
    Permissions repair complete
    My concerns are:
    * Some of the permissions repaired yesterday appear to have needed to be repaired again today
    * There are several files which carry a warning that they won't be repaired as they have been 'modified', and some of these clearly relate to disk management.
    Does anyone have any ideas what is going on???
    Thanks!!

    Many problems with the 10.5.7 update have been fixed by a Restart.
    If that doesn't help, something may have gone wrong with the update. Download and install the "combo" update, from: http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
    If that doesn't help, try running the Apple Hardware Test, on the disc that came with your computer.
    1. Disconnect all external devices (including the Ethernet cable) except the keyboard and mouse.
    2. Insert the "Additional Software & Apple Hardware Test" disc that came with your computer.
    3. Restart while holding down the "C" key. When the list of available startup volumes appears, click Apple Hardware Test and the right arrow.
    4. When the Apple Hardware Test main screen comes up (after a moment), follow the on screen instructions.
    5. If it detects a problem, an error code will be displayed. Make a note of it.

  • How to use iPod Shuffle with external Speakers

    I tried using iPod Shuffle but its not working with external speakers.
    Please let me know if there is any way i can use it in External Speakers

    http://manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User _Guide.pdf

  • HP 4330s SRS Premium Sound not working with External Speakers

    And this is my second topic and rant!
    The SRS Premium sound driver doesn't work with USB Speakers.
    It doesn't work with Bluetooth speakers either!
    In other words it only works with the Laptop speakers.
    ARE YOU KIDDING ME!
    SRS Premium sound for Deeper Bass and Clear sound enhancement bla bla bla now in you HP Laptop
    but ONLY with your LAPTOP SPEAKERS!
    ARE YOU KIDDING ME!
    DEEP BASS on these cell phone speakers!!! Really???
    Why doesn't the SRS Premium Sound driver work with external speakers!
    I believe I have used SRS Sandbox before and ALL THE SOUND was directed to that driver and it worked with everything!
    WHY DOESN'T YOUR HP DRIVER WORK WITH EXTERNAL SPEAKERS!
    Is everyone in HP a bloody RETARD?
    FIX YOUR DRIVERS!
    End of rant!

    Oh BTW {Content Removed: rant} http://www.srslabs.com/landing.aspx?id=693#23
    23. Will the SRS Audio Sandbox work with my USB speakers or Bluetooth speakers?
    Yes, the current version, 1.6.6.0 will work. If you have a previous version that is not working with these speakers, please upgrade to this version.
    Do you have anything else to share with me {Content Removed: rant}

  • Can I use my computer as jukebox with external speakers?

    Can I use my computer as a jukebox with external speakers, and if so, how?

    This article should help.
    http://support.apple.com/kb/HT1215
    You won't get as good performance thought, it's recommended that you use one device for ins and outs. Get an adapter for your speakers so that the jack will fit into the headphone output of your guitarpod. But in the meantime aggregate will work.

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • Strange issue with external monitor, only working when external speakers plugged in

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Hello cgoldberg11
    Please go to the below link to test if you are having a speaker hardware failure.
    Testing for Hardware Failures (Windows 7)
    This will rule out hardware failure, let me know how that goes.
    Thanks
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
    Reguards,
    Mo

  • 4th gen Nano - only 1 channel plays when docked with external speakers

    * bought 4th gen Nano direct from Apple
    * Boynq iCube - music only comes out of right channel (iPod Video works fine though)
    * Jensen JiMS-185 - music barely audible from left channel (iPod Video works fine on this as well)
    * Insten cradle / supplied iPod cable - both channels work fine
    * headphones work fine
    Are there any known incompatibilities between 4th gen Nanos and some external speakers, or is does this sound more like a wonky refurb'd unit? Both problematic speaker systems were purchased new. If it was just one I'd think it was the speaker system. But given that similar issues are spanning 2 different speaker systems I'm not sure what the problem is now.

    Sounds like you have an issue with the pins on the dock connector of your Nano. There is a left and right outputs on two of the pins on the dock connector. It could very well be that one pin is bent and on one radio no connection at all while on the other barely touch causing bad sound.
    Alternatively it might be dirt, grime, oil, or other debris caught in the pins as well that simply need to be cleaned out.
    Get a good magnifying glass, eye loupe, etc. and inspect the dock connector on the nano for debris and for damaged pins.
    Patrick

  • ATV3 with external speakers via TV

    Hi,
    I have been using an Apple TV 3 for a fair while now with my TV and have had no issues. I am now sick of the low quality sound that my TV's internal speakers produce so I went and bought a cheap (but surprisngly good) set of 2.1 PC speakers and connected them via RCA cables to the TV.
    Normal TV programs are now played through the external speakers but audio from my Apple TV (connected to the TV via HDMI) does not play through the external speakers, only through the crappy internal ones. Any ideas on how to fix this? I had a look through the TV settings (very limited) but nothing seemed to be wrong there, and nothing stood out to me in the ATV settings.
    I was under the impression that if I plug external speakers into the TV via RCA any audio that the TV produces should be sent to the external speakers...

    Hello
    RCA-cables are used for analog signals.
    When connecting a device (for example ATV) via HDMI to TV, the sound sent is in digital format. The TV would have to convert this input signal to analog and output it to speakers, i.e it has to have a built in digital to analog converter for the sound output. I don't know how old your TV is, but the most TV sets should have this function.
    The reason why the speaker set works with programs from TV is probably because you have connected the TV to an antenna, and the signal is analog.
    Did you try to connect another unit with hdmi to TV and see if that works (DVD player)?
    Regards
    Jeton

  • Issues with External Sound Devices & others - 13" Late 2011

    Good day community,
    Out of curiosity, I run Diablo 3 on OS X and its been unplayable since ROS expansion, massive fps drops and crashes, Blizzard claims Apple stopped improving hd3000 drivers on 10.8.3, is this true? Also when I run the game through windows via bootcamp it performs better and doesn't not crash, is this related to hd3000 driver support still being improved in windows?
    Other issues I'm experiencing, facetime most of the time fails if I try to pickup a call from the macbook, sometimes it notifies me of the incoming call (iphone 5s) sometimes it doesn't. Bluetooth doesn't work, not even with apple devices, I can't pair any of them. External sound devices such as m-audio fast track pro, native instruments audio 8 dj, allen & heath xone 4d, they all have latency issues and sound clips and pops, even with the onboard sound I experience this if I open a couple graphic editing software while playing itunes. Checked sample rate in audio/midi setup, drivers, firmware, everything seems up to date, I'm not using a USB hub, I updated to Yosemite from Mavericks, which was a terrible upgrade from Mountain Lion and it completely lagged the computer, so when I upgraded to Yosemite I ran disk utility from boot and apparently repaired the hard drive successfully. Performance is better but none of the above issues were solved.
    So I'm thinking about formatting from scratch but wanted to drop a line here and see if others have any of these issues and/or some tips.
    Thank you for your time.
    OS X 10.10.1
    hd3000 (512mb)
    8gb ram
    i5

    Hi Lyndon4321,
    I know that can be frustrating when using an external display, but take a look at the article below to continue troubleshooting. I would take a look at Reset the system and work you way down. 
    Apple computers: Troubleshooting issues with video on internal or external displays
    https://support.apple.com/en-us/HT201177
    Take it easy,
    -Norm G.  

  • FSCK and reboot issues with external USB drive

    I'm having an issue with an external USB hard drive I'm using.  I've always had issues with this drive cause my reboot to "freeze" when it's mounted.  Basically the system message with be sent out, but it doesn't actually proceed with the reboot.  No switch to init 6 or anything, but the shutdown process is still active.  I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand.  So I just got around this by unmounting the drive before I shutdown.  However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser. 
    Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing.  I tried running fsck on the drive, but didn't get much farther.  I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't.  Even with a kill -9. 
    I'm really confused as to what is going on.  Has anyone else had this problem?  Anyone have any ideas what could be causing all this or what I can do to stop this?  Thanks in advance!
    David
    [email protected]

    Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

  • Issue with external WSDL in own Outbound interface using SOAP UI

    Hello,
    this is the issue:
    a) Imported an external WSDL to PI as external definition
    b) Added external definition to a sync. Service interface
    c) Completed configuration and created a WSDL from the sender agreement in Directory (this is PI 7.1)
    d) imported the WSDL from c) to soap UI which we are using for testing interfaces
        (already successful with other sync interface where the WSDL from c) contains a message type created in PI
    e) testing this interface results in an error:
    Error message in MONI:
    SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_TestTrigger_Testm~</SAP:P1>
      <SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
      <SAP:P3>on: Cannot create target element /ns0:props. Value</SAP:P3>
      <SAP:P4>s missing in queue context. Target XSD requires a~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_Test_Testm; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:props. Values missing in queue context. Target XSD requires a</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    This is the message as it looks like in soapUI:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:com="http://jusit.hp.com/sys/common/">
       <soapenv:Header/>
       <soapenv:Body>
          <props>
             <com:Property>
                <com:PropertyName>A</com:PropertyName>
                <com:PropertyValue>1</com:PropertyValue>
             </com:Property>
          </props>
       </soapenv:Body>
    </soapenv:Envelope>
    This is the payload in MONI as it comes from SOAP UI (using http connection):
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Mapping der Request-Message -->
    <props xmlns:com='http://jusit.hp.com/sys/common/' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/'>
             <com:Property>
                <com:PropertyName>A</com:PropertyName>
                <com:PropertyValue>1</com:PropertyValue>
             </com:Property>
          </props>
    This is the payload as it looks like in Mapping Test in Enterprise Repos. from implemented ext.def.:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:props xmlns:ns0="http://jusit.hp.com/sys/common/">
       <ns0:Property>
          <ns0:PropertyName>A</ns0:PropertyName>
          <ns0:PropertyValue>1</ns0:PropertyValue>
       </ns0:Property>
    </ns0:props>
    Is there any restriction with external definitions to be used in PI which could be the reason for this strange behaviour?
    The implementation contained a message type created in PI earlier which was running successful!
    The problem came up with the external definition!
    Thank you for your help!
    Best regards
    Dirk

    Hi,
    the problem is not the mapping as it is 1:1 with the same message on both sides.
    But when I replace the "com"s with "ns0" and "props" with "ns0:props" in the request in soap UI
    the payload will be accepted and mapping is successful!
    So the issue is about the modification soap UI is doing on the imported WSDL.
    a) Generated request in soap UI from imported WSDL:  FAILS in PI!!!!
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:com="http://test.ap.com/sys/common/">
       <soapenv:Header/>
       <soapenv:Body>
          <props>
             <com:Property>
                <!You may enter the following 2 items in any order>
                <com:PropertyName>?</com:PropertyName>
                <com:PropertyValue>?</com:PropertyValue>
             </com:Property>
          </props>
       </soapenv:Body>
    </soapenv:Envelope>
    b) Modified request in soap UI from imported WSDL: WILL BE PROCESSED IN PI
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://test.ap.com/sys/common/">
       <soapenv:Header/>
       <soapenv:Body>
          <ns0:props>
             <ns0:Property>
                <!You may enter the following 2 items in any order>
                <ns0:PropertyName>B</ns0:PropertyName>
                <ns0:PropertyValue>5</ns0:PropertyValue>
             </ns0:Property>
          </ns0:props>
       </soapenv:Body>
    </soapenv:Envelope>
    But is there any possibility to avoid this effect in soap UI?
    Regards
    Dirk

  • Issues with external hard drive enclosure

    I've been having these issues with my external hard drive since I got it, it seems to be the enclosure
    These issues sometimes occur if the hard drive is off but plugged in
    -boot will stall after post, before grub
    -usb mouse won't work unless I unplug it and plug it back in
    -dmesg gives errors about failure to enumerate device
    -stalling at other points during boot (continues as soon as I unplug enclosure)
    And today, both windows and linux stopped detecting it properly
    dmesg said something about a read error.
    Then it started working again as suddenly as it started, when I unplugged it and plugged it back in.
    Does this sound like a deffective enclosure?

    R00KIE wrote:
    I'd say bad power supply (if it has an external power supply).
    Two external enclosures have done that to me already (but one is almost certain to do it while the other just started to do it recently), if the HD I have in the enclosure is a bit older (and noisier) I can even hear the HD spin down a little and spin up again, of course that whatever I was doing explodes in the process.
    Mind you that the HD is confirmed to be working properly by connecting it inside a desktop pc.
    I have couple other power adapters I can try. I got the same enclosure for my dad. I have a brick for a LaCie drive too. (I bought the lacie drive a year ago, but the power supply buzzed loudly. I put in a support request, but ended up returning the drive, and they sent me a new power after that)

  • FireWire issues with external drive in Yosemite

    I have just upgraded to OS X Yosemite, and I have an annoying problem with my 500GB FireWire external drive (which I use for Time Machine backups).
    Basically, after updating the drive won't show up anymore, neither in the Finder nor in the Disk Utility. I also tried the "diskutil list" command in the Terminal, but it is nowhere to be found. Note that the drive does indeed receive power from the port - it spins - and when I look into System Report --> Hardware --> FireWire it does show up there (but I can't mount it). Furthermore, if I use a USB cable to connect the drive everything works fine, so the disk itself seems to be OK.
    The funny thing is that if I boot with the drive plugged in the FireWire port the system mounts it normally. But as soon as I eject the drive, I am unable to mount it again (unless I switch to the USB cable, as mentioned above).
    Prior to the update, everything worked flawlessly. For now, I backed up my Mac via USB 2.0, but it's very slow and I definitely don't want to resort to this workaround everytime. And it goes without saying that I don't like having issues with my primary backup device in general.
    I already did all the usual troubleshooting (rebooting, resetting NVRAM and SMC, ...), but the problem still persists.
    Any suggestion?

    I had the same issue on a rMBP 13'', brand new 2015 March.
    Two thunderbolt adapter connected: one for ethernet, one for firewire Lacie drive.
    and...
    even after taking the ext. Firewire on the Spotlight exclude list, and also after disabling sleeping hard drives, I always got the issue.
    Until I realized that touching the laptop or moving the screen was immediately leading to disconnection.
    Then I exchanged the thunderbolt connectors, and now it is stable and does not disconnect again.
    ??? Maybe one of the ports is more "delicate" than the other?
    Big hardware weakness here...

Maybe you are looking for