Issues with finder going out of sync with file images in cover flow.

Hi All,
I'm having issues with files going out of sync with images in cover flow since updating to Mavericks. Typically, if I had for example 10 pictures listed as 1 to 10, if i deleted images 6&7 the images remain in coverflow but the file listings are removed, then if i click on image 7 the file listing of image 8 is highlighted, then to make matters worse, if i click on the file listing for image 9 in shows image 8 in cover flow. To stop this I have to shut down finder and restart it, then the whole thing repeats itself if i delete more images. Its a nightmare when your working with 50 plus images at a time!!! Help!!
Thanks all.

com.apple.systemuiserver.plist and com.apple.finder.plist
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/. Move the .plists to your desktop.
Re-launch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.
If you look at the 'More Like This' box (top right) it seems the Cover Flow view is having problems.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Similar Messages

HT2729 I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well. What settings can I change to

I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch. What settings can I change to fix the problem.

Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR.

Video - dialog goes out of sync with video

When I play Movies or T.V. shows on my iTouch the dialog (or audio) gets out of sync with the video. It starts happening after about 5 minutes of play. I close out of the video, re-open it and it's back in sync again for about another 5 minutes.
I had a second generation iTouch and have just purchased a 3rd gen iTouch and it does it on both. It happens on every movie or t.v. show I watch.
Any suggestions?

I really appreciate your help. I tried it with the link you provided and it appears it's the wrong format type. The one I'm trying to convert is a .wmv file. I think that link was mainly for mpegs.
I did successfully convert a 3rd movie .wmv file using videora, so I have to think the problem lies with this one movie clip. What could it be? It plays fine on my computer! The video itself is fine after the conversion too, it's just moving too fast as if in fast forward mode. Then when the video ends (before the music, cuz it's not in sync), the video keeps backing up and continuing from later and later previous spots until the song ends.
If you're out of ideas, I guess I'll try to see if I can find the video somewhere else and download it again (I got this video free from a website). It's super cool.. An F-18 pilot video tapes himself performing aerial maneuvers to the song "magic carpet ride". Darn, I REALLY want that on my ipod!!

Teouble with audio becoming out of synce with video.

Hello, I'm using final cut to edit my videos but for some reason, FCP has been giving me some issues. In my work flow I often layout two long video track in the timeline, then I will chop up the top track to create transitions from the top to the bottom and vise versa. as soon I press play, it the video will start off in a slower speed almost as if the computer is overloaded, then it catches up to normal speed in about a second. This has really been driving my crazy. It also effects the way video syncronizes with audio. I can lay both video tracks on top of one another perfectly in sync with the audio, but as sometime once it get's to new scene or the video switches to another track the audio is no longer in sync with the video. sometimes I can stop the footage, then press space bar to copntine and the audio and video will be in sync. This is really weird and I was wondering if anyone has any answers for me. I'm pretty sure it's not an overload on the system because the projects are rather small, and I'm using a quad core 2.5, with 5 gig of ram. and this is my graphic card info
NVIDIA GeForce 7800GT:
Chipset Model: GeForce 7800GT
Type: Display
Bus: PCI
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0092
Revision ID: 0x00a1
ROM Revision: 2152.2
Displays:
Cinema HD:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
HWP D5259A:
Resolution: 1280 x 768 @ 75 Hz
Depth: 32-bit Color
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Thanks so much for you time.
Mike

Yes. Those that are designed to work with A/V files will work better.
Drives from G-tech and Granite Digital are worth a very close look.
However, if you have an empty drive bay in your G5, a second internal SATA drive is the better choice.
good luck.
x

When audio goes out of sync..

In FCP7, when audio goes out of sync with the video track it came from (even when they are unlinked), a red warning box is displayed on the audio track and tells you how far out of sync it is, which easily enables you to resync.
Well, in FCX my audio went out of synce, but i didn't know it until i played back a segment i was working on, where i spliced two audio tracks and video tracks together. Right now i'm trying to fix the one audio track so that is synced up with its parent video track, but so far i'm just guessing that it's a good sync rather than knowing FOR SURE whether or not it's truly synced back up.
Is there any kind of work around, which enables you to resync in a manner similar to before FCPX?
Thanks

I am not sure if your problem has been solved already but here is the way to do that:
select in the clip in the timeline the part were the audio should be return in sync. use the blade-tool to make that part a seperate clip.
Higlight this clip in the timeline and use shift-F to highlight this clip in the browser. There it wil show up partially of course.
Use only the audio and put that part under the selected clip in the timeline where you need the original audio. remove the original out-of-sync audio.

Audio sync problems with greenscreen I have replaced the camera audio with my zoom recorder audio and it is in sync. When I apply greenscreen the audio goes out of sync. What am i doing wrong?? So frustrating..Thanks, Peter

I have replaced the DSLR audio with audio from my Marantz recorder and it is in sync with the dialogue. I apply green screen and the audio goes out of sync. Cannot seem to make it work. what am I doing wrong? Thanks, Peter

Thanks for the reply. I don't have time for this. is it time to switch to a different editor?

Audio out of sync with video in timeline SOLVED

The audio and video are in sync when playing .MP4 video (but may apply to other video files) in the Premiere Pro viewer and Windows Media Player and VLC however, as soon as you drag the clip into the timeline it goes out of sync. Since it took so much time for me to figure out how to get around this problem I wanted to share this, ESPECIALLY For all the people who are semi Adobe Premiere noobs (with no disrespect, I fall into this category) at this and google isn't helping to figure out why this is happening I'll give you the easy fix. For all the people in this forum who are going to ask the detailed information, codecs, etc. I'll give that as well.
FOR THE NOOBS:
All the information I've read online all seems to point that the timeline sometimes doesn't like certain audio contained in the video. It conforms incorrectly, etc. Personally, it doesn't make any sense to me. Forget all that.. you just want to get on with your project.. to heck with the details, you're tired of googling. Here's the solution I found. Extracting the audio from the problematic video file outside of Adobe Premiere. I use avconv, because it's free, open source, and you won't lose audio quality. Then linking that audio with the video in Adobe Premiere.
First if you are using a windows 32 bit computer download avconv here: http://win32.libav.org/win32/
If you are using a windows 64 bit computer download avconv here: http://win32.libav.org/win64/
go to the bottom of the page and click on the newest date version. DISCLAIMER: This is open source software. It's free. I didn't make it so I'm not trying to sell you anything.
It's a zip file so you will need to use winzip or 7zip to uncompress it. You can't just click on the installer. You can uncompress and save the program wherever you want on your computer. Say you didn't pay attention and you automatically saved it in the default spot in your downloads folder. The place you'd find the program might look like this if you're on a 64 bit computer:
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 If you're on a 32 bit computer it will probably look like this C:\Users\youruseraccountname\Downloads\libav-9.7-win32
Just make sure you know where it is located and copy it down in notepad. If you can't find it, do a search on your C: drive for avconv .For this forum thread we will assume you have saved avconv in the downloads folder and you're on a 64 bit computer.
Click on the Windows key on your keyboard. Type in Run and then press enter. Type in CMD and press enter. This will open up windows command line. Don't worry, it's not as scary as you think.
Now hold down the Windows key and press E. This will open up a windows explorer window for you to find the video file you are having issues with in Adobe Premiere. Once you have found the file, copy the location of the file. So.. if your file was here: c:\Users\youruseraccount\videos\yourvideo.mp4 you would see that at the top of the windows explorer in what's called the address bar. Copy that. Paste it into your notepad.
Now switch back to the windows command line window. Now I'm going to have you type a command into the windows command line but before you do I want you to understand how to type it in.
#1. Do you know the exact path (location on your computer) where you installed avconv?
#2. Did you copy the exact path (location on your computer) where you have your video file?
If so.. type in the command below but change it with the information you have above
C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe -i "c:\Users\youruseraccount\videos\yourvideo.mp4" -vn -qscale 1 "c:\Users\youruseraccount\videos\yourvideo.wav"
So let's break it down so you understand and help troubleshoot any issues you may have.
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 this is the example location we said we installed avconv. The actual avconv.exe program is located inside that folder so the full path would be this: C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe
-i just tells avconv what the input file is.
"c:\Users\youruseraccount\videos\yourvideo.mp4" is the path (location on your computer) where your video file is.
-vn just tells avconv you only want to extract audio from the video
-qscale 1 just tells avconv you want the best quality
"c:\Users\youruseraccount\videos\yourvideo.wav" just tells avconv the path (location on your computer) and the name you want to give the audio file you're taking from the video. This will save the audio wav file to the path (location on your computer) where the problematic video file is saved.
Once you have the audio wav file import it into Adobe Premiere. In the timeline, unlink the audio from the mp4 (or whatever video file you have). Highlight the now unlinked mp4 audio and delete the audio. Then bring your audio wav file you created using avconv and bring it onto the timeline at the start of the video. Now link it. Hopefully that did the trick.
If you have any questions regarding the command line or installing avconv please feel free to comment and ask. I'm pretty good at windows command line and can probably help identify what the issue is.
FOR THE INFORMED PREMIERE PRO USERS:
Here are the details of the problematic video file that I had this issue with. This is from avconv:
Metadata:
    major_brand     : mp42
    minor_version   : 1
    compatible_brands: mp42mp41
    creation_time   : 2013-05-12 11:45:32
Duration: 01:58:28.24, start: 0.000000, bitrate: 3256 kb/s
    Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720, 2997 kb/s, 25 fps, 25 tbr, 25 tbn
    Metadata:
      creation_time   : 2013-05-12 11:45:32
    Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, fltp, 256 kb/s
    Metadata:
      creation_time   : 2013-05-12 11:45:32
I don't know the type make/model video camera that was used or if it was converted before being given to me. This is just what i had to work with and the solution I found to fix it.

if you are using a windows 32 bit computer
Then you won't be using anything above Premiere Pro CS4, and this thread would be in the wrong section.
By the way, the process is significantly easier using something like Xvid4PSP, which can strip out the audio using a fairly easy to understand GUI, as wel as convert those oddball videos into something PP can handle.
http://www.videohelp.com/tools/XviD4PSP (Use version 5.)

Exporting keynote to iDVD audio is out of sync with presentation

I am working in Keynotes '09 I have a presentation that is time perfectly when I run the slide show. I have a totally different problem when sending it to iDVD or to Quicktime the recorded audio is out of timing with the presentation. I tried everything but nothing seems to be working, Tech Support can't seem to help me out. The problem is not within Keynotes as far as I can tell. It plays fine in Keynotes. It is happening in the export via QuickTime or to iDVD. Does anybody have a clue as to how I can resolve this issue. Audio is checked when syncing there is sound in iDVD it is completely out of sync with the bullets point and overlapping spoken text from sentence to the next. I used an AAc Encoder on the spoken text synced into itune placed spoken text in to keynotes. should I have used MP3 encoding? that is the only thing I have not tried.

Hi Steve,
I'm having a similar, if not exactly the same problem. I often download files from my Beyonwiz PVR, convert them to mpeg and DV files using MPEG Streamclip (with Quicktime MPEG playback component), then burn a disc with iDVD. Since upgrading to Lion, I notice that the audio in these files, and the burnt DVD in particular, can be slightly out-of-sync with the video. Although the effect is slight, it's completely unacceptable in my book - its like trying to watch something that been badly dubbed. I find it to be a very jarring effect to watch voices and intonation out of sync with the picture.
I'm not sure where the problem lies - is it Quicktime, MPEG Streamclip, and/or iDVD ?
Fox

IDE suddenly gets out of sync with dbx

I recently have seen a few cases where, during debugging sesions, the IDE gets out of sync with dbx: while sitting at a breakpoint, the debugger toolbar buttons suddenly are greyed out with the exception of the "Pause" button, as if the inferior process were running. A message "Process state modified" is displayed briefly in the status line at the bottom. I suspect this may be due to a problem with balloon evaluation, because somehow it seems to be triggered by cursor motion.
It is possible to "rectify" the situation by issueing a "next" in the dbx console, after this, the debugger toolbar buttons revert to their normal state.
I will try to narrow this down further. Is there anything I can do which could help to find the problem?
This happened with Sunstudio Express 07/08 as well as with 11/08.

I finally managed to reproduce this reliably. This was confusing at first because it does not only involve certain C++ code, but also the dbxenv variable output_dynamic_type.
This is indeed a balloon evaluation issue: If the mouse pointer hovers over an expression which involves an overloaded "operator->()", I usually get a balloon saying "<contains function calls>, which is okay. If I set "dbxenv output_dynamic_type on", I get the same output, but the toolbar switches somehow to "running" when the balloon pops up.
I can reproduce this with just a dozen lines of self-contained C++ code.
I will report a bug at bugs.sun.com.
BTW: could anybody please set the timeout value for posts and replies in this forum to a reasonable value? This reply took me only a few minutes, but when i actually posted the message I got a timeout response...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

I too have the same problem. The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video. Apple needs to fix this!!!!!!!!!!!!!!!! its a joke, my iphone is all messed up after the last update as well. at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues. Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!, there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem.

Change of Video Frame One Sample Out of Sync with Correct Point on Timeline

Change of Video Frame One Sample Out of Sync with Correct Point on Timeline.
It has been found on the author's PC that, in Audition 3 in Multitrack View, a video file displayed in the video window will change its frame one sample later than it should do with respect to the correct point on the timeline. This has led to extra work having to be done by the author, as detailed later.
To demonstrate this issue:
Create a new multitrack session. Enable the Time and Video windows. Enable only 'Snap to Frames'.
Using an external program, render a two-frame video clip at 25fps. Let the first frame contain the letter 'A', and the second frame contain the letter 'B'. Making sure that the Display Time Format is set appropriately, in this case at 'SMPTE 25 fps (EBU)', lock this clip on the multitrack timeline, ensuring that the clip starts at time 00:00:00:00.
Create a mono audio clip of silence at 48kHz 32-bit that is two frames long. Lock it on an audio track, ensuring that the clip starts at time 00:00:00:00.
Place the cursor at time 00:00:00:01 and create a cue marker at this point by pressing F8.
Zoom into the timeline so that approximately twenty samples are visible, with the cursor lying on the cue marker in the middle of the screen. The Time window should display 00:00:00:01. The Video window should display the letter 'A'.
Move the cursor back in time (leftwards) by one sample. The Time window should change its display to 00:00:00:00, whilst the Video window should still show the letter 'A'.
Move the cursor forwards in time (rightwards) by one sample, so that it overlays the cue marker again. The Time window should change its display back to 00:00:00:01, whilst the Video window remains showing the letter 'A'.
Move the cursor forwards in time (rightwards) by one more sample. The Time window's display should remain at 00:00:00:01, but the Video window should now display the letter 'B'.
As can be seen from the above steps, the video's change of frame content occurs incorrectly one sample later than it should; the change of video frame content should occur simultaneously with the change of the frame number displayed in the Time window, which is at the point that the cue marker has been placed.
The practical effect of this issue is that it has caused the author a huge amount of extra work on an 89-minute long soundtrack-for-video timeline. There were over 1100 changes of shot which the author wished to mark by placing cue markers at the beginning of every shot. This should have been a quite simple process of enabling 'Snap to Frames', stepping through the video, and laying cue markers down by pressing F8 when the shot was seen to change.
Because currently the Video window (referencing the cursor laying over a cue marker
i that has been placed on the timeline using the 'Snap to Frames' option
) will actually display the end moments of the previous frame rather than the beginning moments of the current frame, laying down a cue marker when the shot is seen to change will actually place that marker at the beginning moments of the second frame of the new shot, not at the beginning moments of the first frame of the new shot, i.e. the cue marker placed will be one frame later in time than it should be. If it is wished for the cue marker to, as best it can, represent the beginning moments of the first frame of the new shot, it has to be manually repositioned so that it is at least a sample later in time than the time at which the shot has actually changed, in order for the Video window to correctly display the content.
The author had to manually reposition all 1100+ cue markers.
Ideally, the Video window should display a change of video frame in synchronization with the change of the frame display in the Time window, which occurs at the position of the 'Snap to Frames' point.
Part of the PC system's specification is detailed below:
Windows XP Professional Version 2002 SP3;
Adobe Audition 1.0 Build 3211.2;
Ad

obe Audition 2.0 Build 5306.2;
Adobe Audition 3.0 Build 7283.0;
ASRock 775dual-VSTA motherboard, BIOS Version P.3.00;
2.80 GHz Intel Pentium D Processor 915 2x2MB L2 Cache;
2GB DDRII 667 RAM;
Matrox G550 DualHead AGPx4 VGA card for Audition's two main work screens;
Matrox Productiva G100 MMS PCI VGA for two additional "static" information screens;
4 x PATA HDDs for OS & programs, swapfile & temp, project file sources, and guide audio;
Onboard Realtek ALC888 7.1 channel audio CODEC with High Definition audio;
Lite-On DVDRW LH-18A1P;
VIA OHCI Compliant IEEE 1394 Host Controller.
ASIO4ALL version 2.8;
Via Hyperion Drivers 5.16a - (VIA Chipsets INF Update Utility V3.00A, VIA PATA IDE Driver Package V1.90, VIA SATA IDE Driver Package V2.30A, AGP V4.60A);
Matrox PowerDesk-SE 11.10.400.03;
Matrox Millennium G550 Display Driver Version 5.99.005;
Realtek High Definition Audio System Software Version R1.91, Audio Driver Version 5.10.0.5605;
DirectX 9.0c March 2008;
Microsoft .NET frameworks 1.1, 2.0 and 3.0 with all service packs.

Video plays out of sync with Flash version 11.6.602.180 in Firefox

I've been receiving multiple reports that some videos plays out of sync with Vimeo's Flash player in Firefox, but not in other browsers (with the same version of Flash installed). Disabling/enabling hardware accelerated decoding does not seem to make a difference. Any ideas as to what might be causing this issue?

This could be multiple issues, but the first thing that comes to mind is the protected mode feature in Flash Player for Firefox. We've made significant improvements in our 11.7 beta and I'd recommend giving this a try:
3/19/2013 - Flash Player 11.7.700.146 Beta
If that doesn't help, or you can't update to the beta version, try the steps outlined in this post:
How do I troubleshoot Flash Player's protected mode for Firefox?
In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue.
Thanks,
Chris

During editing on MacBook Pro 2.2GHz i7, audio goes out of sinc with video

I have been having a lot of trouble with audio going out of sinc after I have edited a 30 minute program. When I make a second cut, I find that the audio has jumped under the first cut about half an inch back, and this happens with every progressive cut. Then after "sharing" to dvd the audio is out of sinc with video throughout. I then have moved each one of these overlaps back into position and still have a problem with audio out of sinc.
HELP.

I was using a different laptop for post since the macbook was busy "sharing" to dvd, which, since I closely examined each cut at highest magnification to fix them ended up making video watchable. Not every cut came out of sinc, but several do.
It is both sides of the cut which come out of sinc, the right side laps over the left and then I noticed when I corrected them with greater magnification that the left side was moved left to cause a gap. I guess I just have to closely examine each cut when done with the whole video since also these overlaps are caused when I zoom out to view the whole length of the timeline, most of the cuts will overlap at that moment. Really strange. I had trouble fixing these but less trouble whe I turned off the snap in option.

IPhone Calendar wiped out after sync with an empty Outlook 2003 Calendar

I need some help.
iPhone Calendar wiped out after sync with an empty Outlook 2003 Calendar.
Unable to restore from backup as my iPhone was backed-up before I realised my calendar info was gone.
I found an old backup file in my old disk but was unable to move the old calendar data to the empty outlook after restore. It just keep wiping out after I sync.
Thanks.

I have managed to find an old back up to restore my iPhone. However even with at least one entry in my outlook, my calendar details on my iPhone was still wiped out and was not transferred to my outlook.

Audio out of sync with presentation (not using full motion)

When I preview or publish a project using Captivate 5, the audio is out of sync with the presentation. I am not using any full motion recording, which I know has caused audio/video sync issues in previous versions of Captivate. The audio is slide specific, with a separate audio file for each slide. (In other words, I'm not trying to break a large audio file over many slides.) When each slide is viewed individually -- in the workstation, in the preview window, or in the published version -- the audio is synced just fine. The problem arises only when I try to watch the entire presentation (approx. 10 minutes in length). The audio gradually lags behind the visual. By about half way through the project, the visual presentation is noticably ahead of the audio. By the end, the audio is nearly 4 seconds behind the video. I cannot detect a noticeable change in pitch or speed of the audio, so if the audio is being altered in any way, the alteration is slight.
However, if I use the playback controls to advance to a single slide, the audio is fine for that slide and those immediately after, although it does gradually get off again as the project progresses. (So, for example, if I start the playback in the middle of the project, the audio will only be off by about 2 seconds by the end, rather than 4.)
I have tried various publishing options (although I don't think publishing is the problem, since this happens when I preview the project as well). I have used 2 different computers and also tried viewing the published version locally and streaming. None of these alterations seem to make a difference. By the end of the presentation, regardless of how the project is published or viewed, the audio is several seconds behind the video.
My specs:
Captivate 5
Microsoft XP OS
2 GB RAM
Publishing to .swf
Suggestions?

Hi Mukul,
Thank you very much for your careful responses. Here are the answers to the questions.
First of all, the "slow video" behavior does appear only after adding the slides mentioned in previous post.
1.    I created a “software simulation” project. It IS a capture+audio recording.
2.    Since I recorded the audio while doing screen capture, almost every slide has audio, which is not convenient to edit at all. Is there any other better way that I missed so that we can keep the audio and video at the same step while editing them? As I know so far, either insert silence or delete a little audio to one slide, the audio becomes short, but the slide duration time is still the same as before unless we change that manually which normally is not precise enough to match the audio.
3.    I tried to add the blank slides at where there is a pause of speaking and where they are close to the problem slides. Otherwise, the speaking would sound weird.
4.    Published SWF file size is 20.6 MB.
5.    I do have two externalized video files for title and end.
6.    Unfortunately, it is still slow even if it played on a different system.
And another problem comes up these days. After publication, the screen resolution is not good (like some grey ink left on screen) wherever click or type something. It did not happen before even if worked on the same computer.
I am very sorry that there are so many problems. I have been working on this for long time. The project totally drove me nuts. Hopefully you have more ideas about that.
I really appreciate your help.
Sincerely,
Linda

Issues with finder going out of sync with file images in cover flow.

Similar Messages

Maybe you are looking for