Issues with hooking up an older kodak aio3 printer to a new hp windows 8 computer

I have a new HP p2-1343wb setup that came with a monitor. It is running Windows 8. I have an older Kodak aio3 printer that i used to use on both a Windows Vista and a Windows XP computer. When I tried to intall the software and drivers for the printer off of the Kodak website, when my computer restarted the screen was split in half, and had horizontal lines running across it and the picture was shaking. I removed the kodak software and it fixed the problem. I am not sure if this is a HP problem, a Windows 8 problem or a Kodak problem. I am going to try the other forums too. Thanks ahead of time for any help.
This question was solved.
View Solution.

Seren014, welcome to the forum.
If this is your printer you can click on the entry below the green check mark (Free download required) and download the software required to run the computer with Win 8.0 / 8.1.
Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Issue with BDC program used for FBZ5 (Check Print)

Hi all,
I am having one requirement in Check printing. as per that i have made one Z program which will accept multiple Payment documents. I am passing selected accounting documents to BDC routine for Transaction FBZ5. (As in FBZ5 we can take a print for one Payment document not for multiple)
We can have 3 scenarios in FBZ5
1. Fresh Check printing (First time check printing)
2. Old Check (printing for same Check no)
3. New Check (After voiding older check)
Category 1 and 2 are working fine but i am facing problem in category 3.
For Category 3 : BDC Screen flow is like this
A. Tcode FBZ5 Start program: SAPMFCHK Screen: 750 --> Click on 'Print'
B. Program: SAPLSPO2 Screen: 0100 --> Here specify option 'New Check'
C. Program: SAPMFCHK Screen: 0700
    - This program belongs to new Tcode FCH7
    - Here we have to give Void Reason code
Now issue with Category 3:
While executing BDC in online and background mode my control is terminating at step C mentioned above
Troubleshooting:
I have debugged standard program of FBZ5
1. in Include MFCHKFD0 we can see call to Tcode FCH7 (PERFORM AUFRUF_FCH7.)
2. in form AUFRUF_FCH7 i found code related to BDC
   also there one statement is getting triggered -->   CALL TRANSACTION 'FCH7' USING BDC MODE 'A'.
So there is a BDC call inside my Z BDC program, so is this a reason why my program is not working for above scenario ?
Or can't we handle above scenario in a way mentioned above?

Hi Sandra,
I was trying to upload customer master in fd01 using bdc. The screens were different while recording. So could not perform the upload. Thenone screen was skipped so that the bdc was working fine and the data was uploaded.
This is the flow of the recording.
'SAPMF02D' '0105'.
SAPMF02D' '7105'
SAPMF02D' '0111
SAPMF02D' '0120
SAPMF02D' '0130
SAPMF02D' '0210
SAPMF02D' '0215
SAPMF02D' '0220'
SAPMF02D' '0230'
SAPMF02D' '0610
After the second screen was deleted the bdc worked fine.

HT204409 I have a new iphone 5 and it won't connect to a wireless router that my old iphone 3GS would pick up. Is there a compatibility issue with some routers or is the antenna weaker in the new iphone 5?

I have a new iphone 5 and I can't pick up a wireless router that I could use with my old iphone 3GS. Is there an issue with the new iphone and is the antenna weaker than the 3GS?

Please read this :
https://discussions.apple.com/message/20053332?ac_cid=tw123456#20053332
Well I copyed it to you here.
Re: Anyone still having IOS 6 wifi issues?
created by mpa9366 in Using iPad - View the full discussion
Having done a lot of reading today and having found a very good online tablet magazine (will post link tomorrow) there seems to be a few tech bods onto the problem.
The magazine I was reading identified wifi problems within hours of the ios 6 release and have been analysing since then with almost daily updates - the story seems to be:
The apple authenthication transmission is normal, it should slip through event prior to a full handshake with the host network being completed - however if not authenthicated then apple will not permit the device to connect (kills the connection) this is designed to protect apple from counterfeiting. So thats problem 1 if you dont receive a token from apple.
Problem 2 is that ios 6 only supports ipv6 (the new ip protocol) whereas outside silicon valley a large proportion of routers modems etc are still ipv4 protocol.
So youre locked into ipv6 in a world where ipv4 devices are everywhere and apple have not allowed for the ability to handle both protocols. This is like GM telling you your car requires an upgrade, everything will improve etc and as part of the upgrade fits a fuel cell motor and stays silent when their upgraded vehicles are simply parked up because they cannot get fuel.
A very basic expectation would have been dual protocol handling - we know the HW supports ipv4 as all wad fine on ios5.
So its going to be hit and miss with networks - more hit than miss in techy areas like silicon valley, but more miss in places like where I am - a small town in rural Switzerland.
Only apple can fix this with a patch to enable ipv4 protocol handling.
There you go. you just need to buy a new router, I'm sure Apple has one for sale, cause it's not there fault for sure.
Wonder why people start to migrate to other devices ?

HT202213 I'm trying to set up "Home sharing" but i can not get into my old computer because of a virus. The old has Vista and an older version of iTunes. The new has Windows 7. Also this is my sons computer however I have made a new user account for me. H

I Have 2 issues;
1. I can't transfer my iTunes library from my old computer which I can't get into due to a virus. I'm trying to transfer my iTunes folder to my sons computer in which I now have a user account. Old is Vista and new is Windows 7. Therefore home sharing is impossible, right? Wrong?
2. I found my purchases from iTunes on my iPhone 4S. I can't seem to download them. There is no button to tap "download". Also, I'm unable to sync to iTunes because my phones default is to sync to my old computer which will not open!

Contact Apple customer support, they can reset your authorizations.
http://www.apple.com/contact

Issues with transferring files from older MacBook to new Macbook Pro

Hi there. I am trying to transfer my files from an older MacBook (OS 10.5) to my new MacBook Pro but there is no firewire and it didn't like the file sharing 'afp' address I tried. My Time Machine is saved on a HD with only firewire so that doesn't help. I have an ethernet cord but can't find how to use it to connect them..am so frustrated. I remember Migration Assistant being so smooth and easy in the past but this is not smooth nor easy. thanks in advance for your help!

It may mean to Snow Leopard, which is more in line with current systems though it's still older. Not sure a cable is going to do it for you if ethernet and wifi failed.
http://www.amazon.com/version-Leopard-computer-processor-required/dp/B001AMHWP8/ ref=sr_1_1?ie=UTF8&qid=1390515676&sr=8-1&keywords=snow+leopard

Print issue with 6.2.9, not able to print a document(Not greyscale)

I am now unable to print a document unless I change the text colour and print from the preview screen.( can print from other apps using my Canon Pixma 4000)
i.e. I cannot print a black text document. It runs through the printer as if it is printing but the page comes out blank.
If I change the colour of the text then it prints
Anyone know how to fix this please.
Thanks
Shirley

Hi Shirley,
I think you've (probably accidently) changed a printer setting. Canon Pixmas offer you the choice of printing with only the black cartridge or only the colour, which allows you to operate the printer even when one cartridge runs out of ink.
To get to the setting, open the Print Center, select your printer from the list, then click the tools icon (labelled Configure or Utility, depending on the Print Center version).
This will open Canon's Printer Utility application. Again, select your printer in the list, then click Maintenance.
In the Maintenance window, use the popup menu at the top to select Ink Cartridge Settings.
In the Settings window, select Both black and color using the popup menu.
Close the window and quit the Printer Utility and Print Center.
Regards,
Barry

Ipod sync issue with rhythmbox or banshee in linux - not able to view new songs in ipod

Ipod nano with version 1.0.2 PC with serial number DCYLLQWTF0GP with model MD477HN, cant be sync with rhythmbox or banshee in linux. I am not able to see new list of songs in ipod

My contact number is - 9999504380 (Delhi,India)

Issue with HelveticaNeue text not being included when printing to Adobe PDF?

I have a document (Word 2010 docx) with a section of HelveticaNeue text on the front page that when printing through Adobe PDF the text does not appear.
Using Acrobat 9.4.6
Tried the same document with:
Win2Pdf - Displays correctly
Converted to .doc - Displays correctly
File\Save as PDF - Dispalys correctly
Any ideas? I can post the document up here but I can't see an option to.

You can try disabling the “Rely on system fonts only: do not use document fonts” option in printer properties.
To do the same.In MS Word:
Goto File -> Print
Select Adobe PDF as printer.
Click on "Printer Properties".
Go to "Adobe PDF Settings" tab.
Uncheck the “Rely on system fonts only: do not use document fonts”
Click Ok and try printing the document
Also update your Acrobat to latest version 9.5.0.
You can download the patch form: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5330

Issues with installing Time zone patch for Oracle 10.1.0.4 in Windows

All,
I have a working Oracle 10.1.0.4 installation on Windows box, I successfully patched the time zone patches(5865568 and 5126270), OPatch successfully installed the patch. But when I verified if the patch was installed, it says the patch is not installed. I wonder if any one else had this issue.
The only difference in my installation was that my database does not use INIT.ORA but uses SPFILE.
The Post Installation steps called to make certain parameter changes in INIT.ORA and restart the database. In my case I did not do this.
Any ideas?
thx
SS

I'm about to install this patch also. If I'm using an spfile I'll need to create pfile from spfile and modify the parameters in the pfile. When I then restart the database in migrate mode I must then say that I'd like to start using the pfile. Am I correct in assuming this??
OR since I know that I'm using an spfile I could alter the spfile and use whats below. After I restart I can then take out these changes.
ALTER SYSTEM SET system_trig_enabled=FALSE, JOB_QUEUE_PROCESSES=0, AQ_TM_PROCESSES=0
COMMENT='Change To Take Effect After Jan 1 Reboot'
SCOPE=SPFILE;
thanks.
Message was edited by:
Bogey

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

TS1363 Once again having trouble with my 6th gen nano not being recognized in ITunes on my Windows 8 computer

Can't decide if the nightmare called Windows 8 is the culprit. I'm reinstalling ITunes (for the 2nd time on this PC) and re-downloading all of my music to my computer. Hopefully I can get the new songs I purchased to show up on my IPod. If not, time to go back to my 1997 discman.

This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Issue with self signed certificates on jetdirect J7949E

I'm having a baffling issue with certificates generated internally for use with some HP printers. I can create certificates and install them on J8003E model jetdirect cards and they work fine. When I try to install certs on any of the J7949E cards they fail with an invalid file message. This applies to the root cert as well.
I'm using the Microsoft cert. authority to generate the files.
The printers with the problematic jet direct cards are 4700 Color laserjets and the working models are 4015x monochrome laser printers. Has anyone had this problem and what was done to resolve it? I'm running the latest version of the firmware on the jetdirect cards but the problem existed with older versions as well.

Ok, I've validated my html and I'm getting a few errors related to Angular. They're all one of two types of errors
Error 1:
<div ng-controller="ExampleController">
Gets the following error:
Attribute ng-controller not allowed on element div at this point.
Error 2:
<my-directive></my-directive>
Gets the following error:
Element my-directive not allowed as child of element div in this context. (Suppressing further errors from this subtree.)
Error 1 is for any Angular related thing...ng-click, ng-controller, ng-show, etc.
Error 2 appears where all my custom directives are.
I did a comparison between the not-working extension and a working one that also uses Angular (without any custom elements). When I validated the working extension, it returned a bunch of Error 1's but no Error 2's (this is expected, seeing as there are no custom elements).
To your question about dynamic HTML - there is none. All of the files are static after they're installed. I double checked this by running a diff-merge between the extension before and after it has been run once. They are exactly the same, so no files are changing.
There are known issues with custom directives in older browsers like IE8 - http://www.befundoo.com/blog/angularjs-directives-in-ie8/
Out of curiosity, I tried adding elements in the head, as described in the above blog, inside my extension. This did not have any effect, and the extension still fails.
I'm considering rewriting my directives as attributes instead of elements, and seeing if that does it. That would take some time though, so if the above info helps narrow down the problem or raises other questions of yours, I'm all ears! Thanks again for all the replies!

Issue with self-signed Extensions

I am packaging my extension with self signed cert that is created with the ZXPSignCmd executable.
It functions correctly and the -verify command confirms the ZXP is good to go.
When a user install the extension, however, it only functions once the first time they open Illustrator after installing it. Every time after that, when Illustrator is opened, the panel is completely blank.
This issue can be resolved by enabling PlayerDebugMode on the end-user's .plist file (as outlined for developers in the blog) but obviously this is something I do not want the end user doing. Does anyone have insight as to why the extension panel only loads once, and then breaks? Enabling PlayerDebugMode addresses the issue, but I can't figure out why. I assume is has something to do with the the way it is signed, but I would like confirmation/clarification if anyone knows what is going on.

Ok, I've validated my html and I'm getting a few errors related to Angular. They're all one of two types of errors
Error 1:
<div ng-controller="ExampleController">
Gets the following error:
Attribute ng-controller not allowed on element div at this point.
Error 2:
<my-directive></my-directive>
Gets the following error:
Element my-directive not allowed as child of element div in this context. (Suppressing further errors from this subtree.)
Error 1 is for any Angular related thing...ng-click, ng-controller, ng-show, etc.
Error 2 appears where all my custom directives are.
I did a comparison between the not-working extension and a working one that also uses Angular (without any custom elements). When I validated the working extension, it returned a bunch of Error 1's but no Error 2's (this is expected, seeing as there are no custom elements).
To your question about dynamic HTML - there is none. All of the files are static after they're installed. I double checked this by running a diff-merge between the extension before and after it has been run once. They are exactly the same, so no files are changing.
There are known issues with custom directives in older browsers like IE8 - http://www.befundoo.com/blog/angularjs-directives-in-ie8/
Out of curiosity, I tried adding elements in the head, as described in the above blog, inside my extension. This did not have any effect, and the extension still fails.
I'm considering rewriting my directives as attributes instead of elements, and seeing if that does it. That would take some time though, so if the above info helps narrow down the problem or raises other questions of yours, I'm all ears! Thanks again for all the replies!

Confusing issues with ORM.

I am having some very confusing issues with ORM.
CF 9,0,0,251028 , developers edition locally hosted, Window XP 5.1
First I created a test in it's own directory using the book club database. Created a CFC called Books and everything ran fine.
But when I move the test to the root of one of my projects it gives a "Mapping for component Books not found."
I set the correct [this.ormenabled = "true"; and this.datasource = "cfbookclub"] in the application.cfc and the test cfm is in the same directory (project root) as the app.cfc and Books.cfc.
I can cfquery the books database from the test cfm just fine.
The main project is in Mach-ii, but the test does not invoke any mach-ii elements, index.cfm is not run - just the test cfm.
I have event commented down the application.cfc so that all is left is
this.name="myApplication";
this.ormenabled = "true";
this.datasource = "cfbookclub";
Also - as a "crazy try anything" I did:
this.ormsetting.cfclocation ="books.cfc";
and created an ORM directory and tried:
this.ormsetting.cfclocation ="orm";
and
this.ormsetting.cfclocation ="C:\ColdFusion9\wwwroot\eBusiness\books.cfc";
Further info:
My test.cfm is essentially:
<cfset books = EntityLoad("Books")>
The header on Books.cfc is:
<cfcomponent persistent="true" entityname="Books" table="books">
Any help would be appreciated.
Sam.

its important to use the same exact cameras on multi camera shoots. also important to take color meter and see what the lights give you. sodium vapor and tungsten and flourescent all need different " color correction" gels to make them equal 32k or 56k .. and its not just orange and blue correction ...its also green and magenta etc...
professionally , you cant do all that at the " lens " with cc filters..you need to actually get to the lights physically ( with scissor lifts or cranes ( manlifts ) and gel the lights too ).
Once you have your lights corrected and ready to shoot...all cameras need to shoot "color swatches - usually Kodak .. with a single light source that equals what your camera is set to ( color temp )...and that is used to get your balance correct in post.
That said it sounds like you are screwed...
To have someone try to correct that professionally would cost more than you can afford, or you would have used that " money " to correct your color etc in the beginning... in other words, if you could afford to send everything to a pro lab and try color correcting all that stuff, you wouldnt have this problem to begin with IMO.
My suggestion:
Since wrestling is a gritty sport and " manly " and full of emotion that is basically " tough " and " hard " ....trash the color altogether and make everything black and white... maybe increase your contrast a tiny bit ...or maybe add a slight " tone " to it....( not sepia which looks just " old " , but maybe slight blue tint ? ) ...something to make it look as gritty and hard as you can...
Then tell client you did it on purpose ! Is part of your concept to begin with... wow them with your creativity !

Issues with hooking up an older kodak aio3 printer to a new hp windows 8 computer

Similar Messages

Maybe you are looking for