Issues with HR integration

Hi All
1) I am integrating SAP HR org structure with SRM 7.0. Our ECC system has thousands of users , however only a few hundred users will be using SRM.
I am setting the HRALX/ USRAC flag to X. So BP should be created even when userID is not present in SRM. Correct?
Tomorrow if a new user is to be on-boarded to SRM , we already have the CP and the BP alongwith user links created . So can the user be integrated into org without any additional efforts , just by creating the ID in SRM & portal ??
2) Initially I had set the OADRE switch as blank. So addresses for org units were not mandatory. However when I ran HRALXSYNC post the replication ,strangely all Employee BP were showing Red , with address missing. This inspite of the fact that address was seen in employee BP records. So I suppose Org address is mandatory to have??
3) After replication when I go to Personalization, SRM user settings, I get an error when in Edit mode.
The error is " User data incomplete. Pls. fill in all required fields". I don't see any mandatory fields blank.
Is it because Form of address and title are not correlated to HR data?
4) Once I run HRALXSYNC I see some phantom users with ID 00000000, 00000001 & so on & the error that "user 00000000 does not exist." Why is it so?
Thanks
Kedar

Hi All
I have found out some answers
1) Yes the BP is created even when no SU01 user exists in SRM. further this switch is irrelevant starting SRM 6.0. Even if the USRAC switch isn't there, BP is created.
2) SRM org unit BP needs to have an address, otherwise it is inconsistent.
3 and 4 still remain unaswered, but closing this thread
Thanks
Kedar

Similar Messages

Issues with Apache integration with Crystal Reports

Hi,
We are using Apache as a reverse proxy to Crystal reports.
Couple of our users are having an issue with the Re-direction or executing the Crystal reports. The apache logs show,
[Sun Mar 08 14:42:38 2009] [error] [client 10.13.34.3] proxy: error reading status line from remote server
I am sure this is to do with the Active X settings on the IE.
Has anyone seen this issue ?
Thanks, Nag

Hi,
If you are using ESS/MSS 1.0 then its poss thru MSS reports launchpad.
Here is the link for it :-
http://help.sap.com/saphelp_erp2005vp/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm
or you can do it from by publishing report first in BW andthen thru appintegrator/crystal iview you can put it into your portal.
Use following link to create your iView :-
http://help.sap.com/saphelp_nw04/helpdata/en/36/d4a94076b63713e10000000a155106/frameset.htm
Crystal Report User guide..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90db5db3-a6a7-2a10-bba1-a5ba583cb7a8
Regards,
Jigar Oza
Edited by: jigar oza on Sep 16, 2008 12:36 PM

Is collection detection for caldav in the works for the lightning extension? Issue with lightning integration with multiple collections.

Hello, i currently have a server running davical which serves my users' calendars, currently users which wish to use thunderbird and do not want to use the web interface for calendaring (and wish to use lightning instead) have to add each collection seperately, rather than just provide the base URL of their calendar info.
So instead on most calendar clients putting this as the calendar address:
davical_base_url/caldav.php/username/
and be done with it, they have to go through the new calendar wizard for each calendar/todo collection, and cannot easily create collections from within the lightning user interface, instead have to resort to either the calendar interface or the davical server interface to create/manage collections. They also have to figure out what the names of the collections are under davical, automatically generated collections have a large UID name instead of the example collection names. I.e. they have to add a bunch of URL's like this individually as calendars:
davical_base_url/caldav.php/username/work/
davical_base_url/caldav.php/username/personal/
davical_base_url/caldav.php/username/worktodo/
davical_base_url/caldav.php/username/personaltodo/
davical_base_url/caldav.php/username/8302E5D8-3630-419E-BCFC-A6A144D292C8/
Are there any workarounds for this or is it in the works? other calendaring applications in the ecosystem haven't had an issue, Android is fine, iOS is fine, CalDavZAP is fine.
Hopefully someone can help,
Cheers.

Hi all,
Just curious if anyone was able to solve this.
We experienced the same issue in both NW2004 (SP 20) and NW2004s (SP11).
Through trial and error, I disabled the portal integration flag, and the InputHelpV2 started working perfectly. Decided to search SDN this morning to see if anyone else had run across this, and this post was right on the same issue.
When the portal integration flag is enabled, and you perform the F4 dropdown...your browser seems to hang, and no popup window is displayed until you click in the browser window with your mouse. Once you click in the window, a tiny small InputHelpV2 window pops up, but it isn't functional (i.e. you can't highlight a row, and click on the check mark without getting an IE error (Access is denied)).
Best Regards,
Chris Cassidy

Issue with Referential Integrity check in Oracle VPD Policy

Hi,
Lets assume I have two tables - Customer and Order, with cust_id in Order table referring to primary key of Customer table.
Example Data;
Customer
cust_id Name
1 abc
2 def
3 ghi
Order
Order_id cust_id Order_type
1 1 A
2 2 A
3 1 B
Now I have policies defined on both the tables;
- for "Select, Insert, Update" queries on Customer table.
- for "Select" queries on Order Table.
Policy 1 on Order Table;
Irrespective of the user, predicate = 'Order_type = ''A'''
Policy 2 on Customer Table;
Irrespective of the user, predicate = '(select count(1) from order o where o.cust_id = customer.cust_id and o.order_type = ''B'') > 0'
My intention is to show only those customers who have atleast one order of type 'B'. And this policy works fine in case a user tries to read data from customer table. (for example, record for cust_id = 2 will not be returned as it don't have any orders of type "B")
However, when a user tries to insert record in Order Table, because of the existing referential integrity constraint, the Policy on Customer table is also getting triggered. And an exception is being raised "ORA-28113: policy predicate has error".
Could someone please explain why this is happening ?

I'm afraid, there is no such a mean.
At least I do not know about it.

Issues with portal integration of Web dynpro for ABAP application

Hi,
I have the following issues when i integrate a Web Dynpro for ABAP application with portal.
1. the iview does not contain some images, such as table scroll button images, maximize and close buttons of popups etc.
2. the iview loads properly, but there is an error in the status bar that says "Access denied"
3. is it possible to do absolute navigation from
   role1->folder1->iview1 to role1->folder2->iview2?
   when i fire this navigation from the webdynpro
   application, the navigation does not happen in the
   portal.
thanks,
Kavitha

>
sridhar vadaga wrote:
> Hi Experts,
>
>
> CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
>   EXPORTING
>     text           = url
> IMPORTING
>    BUFFER         = content .
>
>
> Thanks & Regards
> Sridhar
I think you are overestimating the power of the SCM_STRING_TO_XSTRING function module. By supplying a URL as the value of the input text, it isn't going to magically go read the content from the remote location and convert that to a binary string. It is going to take whatever value you supply in th importing TEXT parameter convert that to binary. In other words it is literally converting the string http://xxx/test.xls to binary. You will need some other mechanism to read the content from the remote location into ABAP memory before you can process it. You will need to use the CL_HTTP_CLIENT class or call some sort of web service to retrive the content.

Issue with SAP Integration Kit 3.0 to access Query BW on Crystal Reports

Hi All,
I've got an problem with my setup of Crystal Reports Server 2008.
I've install Crystal Reports Server 2008 and Crystal Reports 2008 on my Windows 2003 server.
My SAP Client is 7.1.
When i trie to connect my Reports on CR 2008, the connection doesn't work.
I have install SAP Integration Kit but it doesn't work because an error message says me that i've already install a Webserver for Crystal Reports Server 2008.
My Webserver is on IIS 6
My Database for CRS 2008 is SQL Server 2000.
Do you have any idea why it doesn't work ?
I have to install first my SAP Integration Kit 3.0 before install Crystal Reports Server 2008 ?
Thanks a lot for your help.
Regards.

Hi All,
I've got an problem with my setup of Crystal Reports Server 2008.
I've install Crystal Reports Server 2008 and Crystal Reports 2008 on my Windows 2003 server.
My SAP Client is 7.1.
When i trie to connect my Reports on CR 2008, the connection doesn't work.
I have install SAP Integration Kit but it doesn't work because an error message says me that i've already install a Webserver for Crystal Reports Server 2008.
My Webserver is on IIS 6
My Database for CRS 2008 is SQL Server 2000.
Do you have any idea why it doesn't work ?
I have to install first my SAP Integration Kit 3.0 before install Crystal Reports Server 2008 ?
Thanks a lot for your help.
Regards.

Issue with CIF Integration model for Transaction data

Hi Gurus,
I have activated the Integration model for PO & PReqs by location wise and i assumed that transaction data is online and we need not to re activate for any new Product / location combination got created in system.
But the issue is that every time a new material got created, we need to deactivate and activate the integration model for Transaction data to get the transaction data into APO.
Is there any way to avoid the following exercise as it is taking very long time for activation.
Please guide me as it is very urgent.
Thanks for help in advance...
Thanks & Regards,
Jagadeesh

I assume 1,60,000 location products are spread around different locations.
Rather than one Integration Model it is better to have multiple Integration Models.
For example: one for each region like North America, one for Europe, one for Asia (assuming you have countries spread across the world). Or create Intgeration Model by Country.
This way you reduce the number of Products in an Integration Model.
It is very important to have manageable set of Integration Models. Let me give an example - you have some problem hence the single Material Master Integration Model is down (inactive). At that time any PP or PDS transfer will not have the Header or COmponent products transferred to APO (in effect PDS/PPM cannot be transferred). If you are creating or converting Planned Orders they will not transfer to R/3 (as Header product is not part of active intgeration model).
But if you have country spefic or region specific Integration Model - only that country is affected not all.
In fact you should have other integration model (like PDS/PPM, Procurement Relationships, Planned / Production Orders, Sales Orders, Stocks) in same manner i.e. either Country(s) specific or group of countries by region. The risk of models getting inactive or taking too much time to activate after regeneration easily outweighs management of more number of Integration Models (compared to one Global integration model per object).
Hope this gives you some direction.
Somnath

Issue with Integrated Weblogic Server in JDeveloper

Hi
I'm using JDeveloper version: 11.1.1.7
I'm facing issue with the Integrated Weblogic server in JDeveloper.
When I run the server, the log says as follows:
*** Using port 7101 ***
D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar
PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ADE\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin;C:\Program Files (x86)\Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_51"
Java(TM) SE Runtime Environment (build 1.6.0_51-b31)
Java HotSpot(TM) 64-Bit Server VM (build 20.51-b02, mixed mode)
Starting WLS with line:
D:\Java\JDK16~1.0_5\bin\java -client   -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy -agentlib:jdwp=transport=dt_socket,server=y,address=49879 -Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=www-proxy.idc.oracle.com -Dhttp.proxyPort=80 "-Dhttp.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Dhttps.proxyHost=www-proxy.idc.oracle.com -Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM -Dweblogic.log.Log4jLoggingEnabled_uim=true -Dlog4j.configuration_uim=loggingconfig.xml -Duim.logging.watchdog.timer=5000 -Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp -Dweblogic.management.discover.retries=6 -DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig -Dsun.lang.ClassLoader.allowArraySyntax=true -XX:-UseSSE42Intrinsics -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.authz=ACC -Xverify:none -da -Dplatform.home=D:\fmwps6\WLSERV~1.3 -Dwls.home=D:\fmwps6\WLSERV~1.3\server -Dweblogic.home=D:\fmwps6\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=D:\fmwps6\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1 -Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Listening for transport dt_socket at address: 49879
Debugger connected to local process.
<Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 16, 2013 7:19:44 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.51-b02 from Sun Microsystems Inc.>
<Aug 16, 2013 7:19:44 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for BUG13114768 Sat Jan 21 16:14:44 IST 2012
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Aug 16, 2013 7:19:47 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2013 7:19:47 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Aug 16, 2013 7:19:56 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log.>
Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
INFO: Notification sent for Mapping config object reloaded
Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
INFO: Notification sent for Mapping config object reloaded
<Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2013 7:20:20 PM IST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source InventoryTxDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Aug 16, 2013 7:20:22 PM IST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "mds-commsRepository". Connections will not be tested.>
<Aug 16, 2013 7:20:39 PM IST> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Aug 16, 2013 7:20:58 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application UIMCMWSAdapter is not versioned.>
<Aug 16, 2013 7:21:11 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application oracle.communications.inventory is not versioned.>
<TableBuilder> <_buildSchema> Metric table "webcache:request_filter_denied_stats" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Information" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Performance" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Response" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Servlet_Response" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Remote_Bridge_Elements" has no key column. It will not be collected.
<ConfigurationUtil> <getProperties> Could not load runtime-poms.properties
<Aug 16, 2013 7:21:52 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection www.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.Inet6AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:876)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)
at java.net.InetAddress.getAllByName0(InetAddress.java:1180)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
Truncated. see log file for complete stacktrace
>
<Aug 16, 2013 7:21:53 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection svn.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.InetAddress.getAllByName0(InetAddress.java:1184)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
at java.net.InetAddress.getAllByName(InetAddress.java:1046)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)
Truncated. see log file for complete stacktrace
>
<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.
<AdfDiagnosticsJarsVersionDumpImpl> <dumpVersionInfo> Path of the jars version dump :D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv
<FeatureUtils> <_resolveFeatures> Ignoring feature-dependency on feature "AdfDvtCommon". No such feature exists.
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 223
<Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Aug 16, 2013 7:22:08 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 14.96.8.250:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
But it doesn't list the server while deploying the application.
I don't see the issue in my office network. But I encounter this problem when I work at my home.
Ideally it should show the following lines after server is started:
DefaultServer startup time: 195467 ms.
DefaultServer started.
This is not happening if i run the server without network.
How can I fix this problem?
Thanks
Ravi

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

Issue with SIEBEL - XI Integration with SOAP

Hi,
I have an issue with the integration of SIEBEL and XI via SOAP.
In the scenario Siebel calls a synch Web Service on XI. The provided WSDL was implemented on Siebel and when Siebel calls the Web Service the message is received correctly by the XI SOAP Sender Adapter and I can see the message in the Message Monitoring (SXMB_MONI).
The issue is during the mapping as the payload does not seem to comply with the structure XI expects in the message interface. When I load the payload of the SOAP Request send by Siebel into the Message Mapping Test Tool, all fields below the Message Type are in red. I found out that the problem lies in the way the namespace is addressed.
The payload I receive from Siebel that is not working in the mapping looks like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <MT_KUNDE_CRM xmlns="http://www.xyz.de/ariva/Kunden" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <KUNDE>
- <Account>
<CRM_Account_ID>1-S3YU</CRM_Account_ID>
<Customer_Segment>Other Account</Customer_Segment>
<Target_Market>Other Markets</Target_Market>
<Currency>DEM</Currency>
<Inactive_Account>N</Inactive_Account>
<Country />
<Account_Name>ATK Test Company 1</Account_Name>
</Account>
- <Account_Address>
<Country>England</Country>
</Account_Address>
</KUNDE>
</MT_KUNDE_CRM>
The structure that works looks like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <kun:MT_KUNDE_CRM xmlns:kun="http://www.xyz.de/ariva/Kunden" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <KUNDE>
- <Account>
<CRM_Account_ID>1-S3YU</CRM_Account_ID>
<Customer_Segment>Other Account</Customer_Segment>
<Target_Market>Other Markets</Target_Market>
<Currency>DEM</Currency>
<Inactive_Account>N</Inactive_Account>
<Country />
<Account_Name>ATK Test Company 1</Account_Name>
</Account>
- <Account_Address>
<Country>England</Country>
</Account_Address>
</KUNDE>
</kun:MT_KUNDE_CRM>
The ony difference between the two is that the second messages uses a prefix (kun) for the namespace while the first does not use it, although it is correct from an XML syntax perspective.
Can anybody help?
Thanks in advance.
Alex

Hi
Why don't you try and create a schema (XSD) which will prefix kun to the input, instead of using the message type created by XI.
Just a suggestion.
regards
Sameer

Authentication issue with Xcelsius/Portal integration

I am facing an issue with the way we have integrated our Xcelsius dashboard with our corporate portal. I know this probably is more of a SDK question than Administration, but I figured I will ask it here anyway since Tim and some others are diverse enough in their knowledge base. This might be LONG post but please advise if anyone has any good pointers.
We have an Xcelsius dashboard that needs to be served up via our corporate intranet (based on MS Sharepoint 2007). Now we are NOT using the MS Sharepoint Portal Integration Kit, but just doing a basic integration of the SWF call within a web part on Sharepoint. All this means is that within a portlet (web-part) on Sharepoint, I am making a HTTP call to the openDocument URL to invoke the SWF file. So the SWF is actually served up from our Tomcat App Server, and displayed onto this frame within the portal. That is the basic idea.
To achieve this, what I did was write some custom code using the Java SDK to modify the openDocument a little bit. By doing so, I was able to insert some behind-the-scenes-login code wherein no matter who the portal user (Win AD-based) is, he is logged in to BOE as a generic "dashboard-user" and the dashboard is served up. This worked fine for the first dashboard where all we had was SWF and some WebI linking using openDocument (no full-InfoView access).
But in this second dashboard now, what we also have is a hyperlink for users to get to InfoView to do Ad-hoc reporting. What this does is open a child browser window from within the portal (dashboard) --- and it remembers the BOE session for the generic user id "dashboard-user" and logs the end-user in to InfoView using that. But what I actually want is that the end-users, on this new window, should only be prompted at the traditional InfoView logon screen where they can manually enter their Windows AD password and get in. Thus, I would like to keep the dashboard SWF page session separate from the InfoView ad-hoc session, which I cannot seem to do because of the browser relationship and session maintenance.
I am trying to find a way where I can simulate a single sign-on for dashboard viewers on the portal, but at the same time let them jump off to InfoView as themselves.
Any thoughts on how I can do this?
Notes:
We DO NOT have Single Sign-On enabled for InfoView
We are using Windows AD authentication (manual, no SSO)
We are on Tomcat

Sarang Deshpande wrote:
1) If the InfoView app on Tomcat (desktoplaunch) is configured with Vintela, openDocument calls from the portal with automatically work using behind the scenes SSO, correct?
in XIR2 everything that falls under infoview should SSO when infoview is setup for SSO (not the case in XI 3.x)
Sarang Deshpande wrote:
2) What is the best practice when it comes to the service accounts needed? I have implemented Windows AD manual auth already so I have a service account that use for that. Should I be using the same on and making vintela/SSO-specific changes to it...or should I have a separate vintela service account and deal with two different ones..each for a diff purpose?
There is no best practice per se but the less service account the lower your chances to duplicate an SPN, functionally everything seems to work just as well with multiple as it does with 1 (of course with 1 there is less management work) If you click the SSO link in my forum sticky post I have a section explaining this with some suggested methods of deploying a service account(s)
Sarang Deshpande wrote:
3) Other than some minor browser configurations that might be required, is there anything else that I should communicate to the team about what might be required to be "pushed" to users' PCs?
Using the default config nothing should be required on the client machine (unless SSO has been disabled in the browser or you intend to use a url that contains a period ..... (i.e. FQDN or IP) with hostname URL (the default) it should just work.
To note if you have XP SP2 or older there is a microsoft spnego bug you may need to apply a fix if you aren't patched to SP3 (about 5% of our customers run into this).
Regards,
Tim

Issue with Office 365 integration module

I have an issue with the Office 365 integration module on one of my customer's Windows Server 2012 Essentials servers.
Recently they switched to a new Office 365 plan, but the integration module still thinks the customer is on the old plan. This doesn't seem to affect functionality at all, so I think it's just cosmetic. On the Office 365 tab of the Windows Server Essentials
dashboard, under Subscription it lists the old plan and says the subscription has expired. Under Licenses it says "your subscription includes 0 licenses" and "0 licenses are assigned to user accounts."
Steps I've tried to resolve this issue:
Created a new Office 365 test user account (after switching plans) and then on the Windows Server 2012 Essentials dashboard clicked 'Change the Office 365 administrator account.' This made no difference.
Uninstalled and then reinstalled the Office 365 integration module. Again, this made no difference.
I suspected there might be an issue in the Office 365 back-end, where the customer's Office 365 account was somehow still associated with the old plan, but they said that wasn't the case.
I opened a service request with Office 365 support about the issue with the server dashboard, but this was their response: "As we are online service support team, we provide limited support on local application extension...you may need to contact the
Windows Server support team for further help."
As it seems to be just a cosmetic issue, I'm not going to open a paid service request with the Windows Server support team, but I'm interested to know if anyone on the forum has struck this issue before or has any suggestions.

Not seen this issue myself, you may be right in that it Is just a cosmetic issue, and I would be surprised if a fix was forthcoming even if you opened a case (or we opened a case for you) due to resources having shifted to the Windows 10.
You could grab the OIM logs from programdata\windowsserver\logs and we can see if there is anything obvious in there.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Tacacs+ access issue with ASA firewall after integrating with RSA SecureID

Hi,
In my earlier post, I raised the same question but let me rephrased it again. I have configured TACACS+ in cisco ASA firewall and able to access . But when I integrated it with RSA secure ID , I am not able to enter in enable mode. It is not accepting enable password nor RSA passcode. I have created enable_15 in ASA , ACS and RSA server but no luck.
Did any one face similar issue with ASA access ?
Rgds
Siddhesh

Hi Siddesh,
In order to help you here, I need to know few things:
1.] Show run | in aaa
2.] When you enter enable password on ASA CLI, what error do you see on ACS > Monitoring and reports > AAA protocols > tacacs authentication > "look for the error message"
3.] Turn on the debugs on ASA "debug tacacs" and "debug aaa authentication" before you duplicate the problem.
~BR
Jatin Katyal
**Do rate helpful posts**

EIM/WIM integration issue with UCCE

I have configured the ICM AW as per the document of deployment of CIM 9, all the MRD and application instances and skillgroups are created for each MRD and also added the agents in the member of the skillgroups, now I am running the integration wizard on EIM server everything goes fine till the agent addition window appears which appears to be blank now I don't know what am I missing in it, may be its something in the pg explorer MRD which I have tried with everything but the agent are not showing up, anybody have any idea, why the agents are not showing up,,????
One more thing we have a generic pg for agent and CVP and an MR pg for dialer and one pim for CIM..any issue with it??

When you run Integration wizard do you get Agent PG? and for selected Agent PG do you have any Agent Configured ?
Check Your Application Path list and Application Path, check correct Agent PG is configured.
once again walk through,
Cisco Unified Web and E-Mail Interaction Manager Deployment and Maintenance Guide and check all the configurations are in the place.
i think Generic PG is supported, and that how it is done in Package CCE where Generic PG and MR PG installed on same Machine.
regards
Chintan

Issue with Opportunity schema contained in Opportunity.wsdl and Integration

There is Opportunity XML schema object defined for Siebel web-service with URI “urn:/crmondemand/xml/opportunity” in opportunity.wsdl and opportunity.xsd contained in integrationevent.zip. Please find attached the schema files.
If you check the diff, the opportunity schema is different, which is actually a conflict from Siebel side since it is the same object identified by URI “urn:/crmondemand/xml/opportunity”. Can we get some information about the discrepancy from Siebel OD team?
Following compiler error comes for the BPEL process, where both Opportunity wsdl and integration event being used:
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Global Type declaration/definition of name '{urn:/crmondemand/xml/opportunity}Opportunity' are duplicated at the following locations:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [line#: 89]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [line#: 12]
There are at least two of them looking different:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [difference starting at line#:635]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [difference starting at line#:558]
Global Type declaration/definition of name '{urn:/crmondemand/xml/opportunity}Team' are duplicated at the following locations:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [line#: 2602]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [line#: 2524]
There are at least two of them looking different:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [difference starting at line#:2602]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [difference starting at line#:2524]
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
Following is the difference between two schema:
New line in opportunity.wsdl
<xsd:element name="ListOfOpportunityContactRole" maxOccurs="1" minOccurs="0" type="xsdLocal1:ListOfOpportunityContactRole"></xsd:element>
Difference between the sequence of elements in both schema:
<xsd:complexType name="Team"><xsd:sequence><xsd:element name="OpportunityAccessId" maxOccurs="1" minOccurs="0" type="xsdLocal1:string30"></xsd:element>
<xsd:element name="OpportunityTeamId" maxOccurs="1" minOccurs="0" type="xsd:string"></xsd:element>
Thanks and regards,
Bhavnesh Patel.
Edited by: bhavnesh_p on Oct 9, 2008 1:24 PM

Hello Bhavnesh,
we just got into the same issue with the differing Opportunity-XSD/WSDL you have mentioned in your posting.
Following is the difference between two schema:
New line in opportunity.wsdl
<xsd:element name="ListOfOpportunityContactRole" maxOccurs="1" minOccurs="0" type="xsdLocal1:ListOfOpportunityContactRole"></xsd:element>
Difference between the sequence of elements in both schema:
<xsd:complexType name="Team"><xsd:sequence><xsd:element name="OpportunityAccessId" maxOccurs="1" minOccurs="0" type="xsdLocal1:string30"></xsd:element>
<xsd:element name="OpportunityTeamId" maxOccurs="1" minOccurs="0" type="xsd:string"></xsd:element>Did you get any update on this problem?
Thanks in adavance & Best regards..
Andre

Intel vPro AMT integration with SCCM 2012R2 - Issues with SCCM finding the "ConfigMgr AMT Web Server Certificate"

Good evening all,
I'm attempting to get Intel SCS integrated with SCCM 2012 R2 and I have both sides working, doing what they do best, however, I have issues when I try to mate the two. I started with a single server for the site and then tackled the Intel side with success,
then I added another site server to run the Out of Band service point and Enrollment point. Up until this point I've had no issues with certificate templates, or issuance of those certs.
I have re-read the TechNet documents a few times regarding the PKI setup, some Intel documentation and three step by step articles and non of them seem to differ so I can't understand why I'm unable to choose my "ConfigMgr AMT Web Server Certificate"
when configuring the Out of Band Management Component Properties page. The "AMT web server certificate template:" dialog shows my CA FQDN and CA name, but the certificate template list is always blank. I've tried this from both the remote
and local ConfigMgr consoles. The site servers have rights on the CA to manage and issue certs, is there something I'm missing that isn't in the documentation or buried somewhere that I missed? Is there a Application policy that should be on the
cert that isn't mentioned anywhere?
Thanks in advance!
Tesfaye

Hi Joyce,
Thanks for responding. I pretty much have this error repeating in the log file and not much else:
[28, PID:13388][05/21/2014 15:17:15] :System.DirectoryServices.DirectoryServicesCOMException\r\nThere is no such object on the server.
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne)
   at System.DirectoryServices.DirectorySearcher.FindAll()
   at Microsoft.ConfigurationManagement.AdminConsole.Common.ADUtils.EnumEnterpriseCACertificateTemplates(String domainEntryName, String certAuthorityFqdn, Boolean isServerAuthen)\r\n
I will look into this, but another hint would be greatly appreciated!
Thanks,
Tesfaye

Issues with HR integration

Similar Messages

Maybe you are looking for