Issues with image centering when printing from CS5

I contacted EPSON tech support about this issue, they are putting the blame on the application used - in my case Photoshop CS5 printing with an EPSON R2880.
I am trying to figure out exact print tray margins to take into account when printing horizontal 13x19 images on EPSON's Hot Press 13x19 paper on the R2880 (via manual roll single feeder).
These are not borderless full frame images, 13x19 image files set on white with exact white frames around the image, so the shift in centering becomes quite obvious on the print.
Here are the two print settings I have tried, both do not center the image correctly:
Selected Scale to Fit Media & Center Image Top:0 Left 0.105
Selected Center Image: Top: -10,152 Left -0.118
(margin values are entered in the print window automatically)

u are probably not getting much help on this unless you post screenshot of your process (starting with File> Print window)
remember, Photoshop can print a document correct regardless of how it looks on the monitor (and vice versa: Photoshop can display a document correct regardless of how it prints)
i recommend getting a known target like the WhackedRGB.jpg and see where the problem is occuring (in Photoshop color management settings, on the monitor, on the printer or both)...

Similar Messages

Issue with Emoji icons when sent from iOS6 to iOS5

Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problem

Hi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker

Separator page prints out with wrong name when printing from Outlook 2010

Working with Windows 7 Enterprise, Outlook 2010. We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building. Printing from IE, Word, etc. all work fine, and it'll print
out the correct username on the separator page.
When anyone attempts to print an Outlook email, it instead prints out my username. We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

Hi
As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
To create a custom separator page file, use a text editor such as
Notepad. On the very first line, type one single character, and then press
Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
In the Print Manager, select the printer that you want to use the separator page file with, and then click
Choose Properties on the Printer menu.
Click
Details, specify the name of the desired separator page file in the
Separator File box, and then click OK.
Note:
Put the custom separator page file in one of the following locations:
In the %Windir%System32 folder.
In a folder whose path contains a SepFiles folder. For example:
Drive:\Folder\SepFiles\Subfolder
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

[none] on center of page when printing from CS5

All of the sudden a [none] is printing accross everything I print from CS5. There is no error message and the print goes through without a problem.
I can print from MS word and other programs without a problem. I'm printing to an HP3800 and my OS is Win7.
Any help would be appreciated!

I did the ctrl-alt-shift pressed while starting photoshop. I also uninstalled the only plugin I had installed.
Below is the last bit of information from the Help -> System Info....
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
   Access CS Live
   CS Review
   CS News and Resources
Installed TWAIN devices: NONE
Guess it could be a font issue. What do you reccomend for font validation (OS win7)? Found this info on MS website. http://www.microsoft.com/typography/fontvalidator.mspx
NOTE: The proof I am currently trying to print is flat....
UPDATE: I am able to print the same document from CS6 on a mac without issue.

Issues with colour management when printing since resetting cs5

I have recently reset my CS5 so that I could attempt to restore my auto color and auto tone options. Since doing this, my color management is very off when printing. The images are darker, and more saturated than usual, as well as significant colour shifting. I have tried various printer and computer settings and tests, recalibrating my monitor and printer, and attempting troubleshooting with articles online. I have also tried resetting photoshop again, thinking that I may have thrown off the settings when trying to fix my auto color options. I have also run nozzle and print head checks, and everything has come up fine. I am pretty sure there is something wrong with the photoshop side of the printing. I am kind of at my wits end as I am running out of ideas to resolve this issue. I am a windows user, and I am printing on a Canon ipf8100. Please help!

u are probably not getting much help on this unless you post screenshot of your process (starting with File> Print window)
remember, Photoshop can print a document correct regardless of how it looks on the monitor (and vice versa: Photoshop can display a document correct regardless of how it prints)
i recommend getting a known target like the WhackedRGB.jpg and see where the problem is occuring (in Photoshop color management settings, on the monitor, on the printer or both)...

Results are different when printing from CS5 and CS4

A file that printed fine with Photoshop CS 4 printed very dark when printed with CS5, with no changes made to the settings. Has anyone else had this problem?

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

Image moves when printed from SAP queue versus Adobe Reader.

I've got a form with a image embedded into it that serves as a background watermark.
This document is usually printed from Adobe Reader, however some users have requested the ability to print directly to a SAP printer without using Adobe Reader to print using windows drivers.
When the form is sent to a SAP printer the image watermark is for some reason moved about 3mm to the right which causes the watermark not to align with the Text Fields that also print on the form. The text fields do not move, they print in exactly the same spot with either print method. Only the image seems to be affected.
Has anyone run into this? The image is an embeded .png file that is set to Scale Image Poportionally in the sizing options.
Thanks for any input!

Thank you for your replies.
I looked at the notes you suggested and it does seem related to the extra margin added to documents printed to PCL-5.
If I use LiveCycle to set an image field .5mm from the left edge of the page, and then print it from SAP directly and then from Adobe Reader I see two different things.
Adobe Reader (with page scaling option turned off) will simply omit anything that falls outside the printable range.
SAP will move the omitted content into the printable area. This is what is causing my image watermark not to align properly with the text in front of it. The image field was too close to the left margin and so in the process of printing, SAP has moved it over to fit in the printable area.
It seems I can fix this issue for my particular requirement by creating a new image field that has the extra white space removed so that I can keep the image field farther away from the left edge of the page.
Not sure if there is some way to change the way the drivers for device type HPLJ4 are handling these margins, but it will likely just be easier to change the images to move them further from the edge which seems to fix it.
Edited by: Clay Robinson on Feb 15, 2011 9:59 PM

Paper Type issue with Adobe Standard X printing from browser

I work in IT and have two users who suddenly started having a problem printing PDFs from a browser (IE9). We cannot upgrade the borwser to 10 or 11 because it becomes incompatible with a few of our in house websites. I uninstalled standard and installed Adobe Reader XI and did not experience the same problem, but they are in need of Standard X in order to do their job.
What happens is when the PDF opens in the browser and they go to printer, the default for paper type is High Gloss paper instead of plain or unspecified. This doesn't happen if we open a pdf from the desktop and print and the default for the driver is plain. Yes, we could save the document and then print it, but they feel that takes more time and I have to find out why this is happening. Any help would be very appreciated.
Windows 7 32 Bit PC
Internet Explorer 9

Probable issue with the Firefox is that in the documentation it is poorly worded poorly, JIDS only support FF 17.
What is the issue with IE if that does fix the FF issue?

Issue with Enter-PSSession when running from the shell and via script

Hello
Can someone please help me with the following issue
If I open the PowerShell console and do the following
Enter-PSSession -computername Server1
"This is a test" > C:\Log.txt
Exit-PSSession
It works e.g. the Log.txt file is create as expected on Server1
However if I put the exact same command in a script and execute the script.
./TestScript.ps1
The Log.txt file is created on my Client (e.g. PC) and not the Server1
I also tried using $Session = New-PSSession -ComputerName Server1 etc.....
then Enter-PSSession -Session $Session
I also tried Enter-PSSession etc....
Start-Sleep -seconds 60
"This is a test" > C:\Log.txt
Exit-PSSession
Again no luck when running from shell all OK, then executing as a script (again from the command line) files is created on client
Any ideas why this is happening please and how to resolve, I am using PowerShell v4 on the client and PowerShell v2 on the Server
Thanks
AAnotherUser__
AAnotherUser__

No, the command is explicitly designed for interactive use, not within a script. If you see
http://technet.microsoft.com/en-us/library/hh849707.aspx you'll even see it clearly state that it "Starts an interactive session with a remote computer".
There are quite a few threads elsewhere on the same subject, all of which say the same thing, for instance
http://powershell.com/cs/blogs/tips/archive/2010/11/15/enter-pssession-do-s-and-don-ts.aspx and
http://powershell.org/wp/forums/topic/running-multiple-remote-commands-with-enter-pssession/ and
http://blogs.technet.com/b/heyscriptingguy/archive/2009/10/29/hey-scripting-guy-october-29-2009.aspx and
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/7e89b957-ff5b-42c4-b107-d7e18752fcf1/enterpssession-within-a-script
So when you run it interactively, you've started the interactive connection to the remote computer and are now running the relevant commands on that machine. When you run it from the script it starts the remote connection, but crucially it doesn't use that
new connection, the script is still being run in the current local session.
When you think about it makes sense. Using the Invoke-command method you're connecting to a remote machine, sending the script block to the remote machine, and then running that block of code on the remote machine. The remote machine only knows about the
code you send it, not the rest of the script (which is why if you use variables you have to pass them to invoke-command otherwise they won't be available to the script block on the remote machine. Conversely, when you use the Enter-PSSession method, you've
connected to the remote machine, but you haven't passed any code to it. At that point you're on the remote machine, but it has no way to know what you want it to do since your script code is on the local machine. It can then either return to the local
machine and run the next line of code locally (which it does), or sit there connected to the remote machine waiting input that will never come (which would be even less useful).

Gradient Feather not appearing when printing from CS5

I've created a document in InDesign CS5 and placed a box with a gradient feather over an illustrator image (vector). For some reason, the box isn't printing with the feather, but rather as a solid image. I've experimented with importing the illustrator image and box into Photoshop and saving as a tif file, then reimporting into InDesign. The gradient then prints fine, but now there is a moire pattern. Does anyone have any ideas? Thanks!

Try applying the gradient feather to the frame that contains the graphic (don't make a separate frame).

Porting issues with boost::regex when going from CS6 to CC2014 using Xcode

I have a working project in CS6 that uses the boost::regex framework that I'm having problems porting into CC2014.
I ported this project by using Dolly to create a new project, then coping the old source files across, finally updating the various out dated InDesign API calls that appeared when I compiled. For the use of regular expressions I added the debug and release builds of the boost_regex.framework to the respective targets.
Now, for the debug build the new CC2014 projects builds happily. But when I switch to the release build I get a few linker errors. They are all something like:
Undefined symbols for architecture x86_64:
"boost::re_detail::get_mem_block()", referenced from:
boost::re_details::perl_matcher<__gnu_cxx::__normal_iterator<char const *, std::string>, std::allocator<boost::sub_match<__gnu_cxx::__normal_iterator<char const *, std::string> > >, boost::regex::regex_traits<char, boost::cpp_regex_traits<char> > >::find_imp() in SbRegex.o
etc.
I did a bit of reading through the boost header files. The odd thing is that the "get_mem_block()" appears to be defined for the pre-processor option BOOST_REGEX_NON_RECURSIVE, while in the project settings for BOOST_PREPROCESSOR_DEFINITIONS contains BOOST_REGEX_RECURSIVE. These two settings are mutually exclusive and there's pre-processor logic that blocks having both cases defined at once.
This recursive option is used to control how memory is used while processing a regular expression, so seeing a get_mem_block() call (other link errors involve a call to put_mem_block) sort of makes sense being calls that look like something to do with memory.
I'm trying to figure out why debug builds, but release build fails. Does this problem look familiar to anyone? Anyone have any suggestions to try to fix it?

Thanks for the reply, Bartok, but those didn't seem to work for me. Maybe I applied them incorrectly as that thread was for the Win platform and not Xcode and I might have translated the solution poorly.
Basically I went to the "Release_Cocoa64" target, and scrolled down the "Build Settings" page. I then edited the BOOST_PREPROCESSOR_DEFINITIONS field.
First I tried just appending BOOST_SYSTEM_NO_DEPRECATED.
Second I thought that this might be a macro of some sort so I tried $(BOOST_SYSTEM_NO_DEPRECATED).
Finally, I deleted all the previous values and added "BOOST_ALL_DYN_LINK BOOST_REGEX_USE_CPP_LOCALE BOOST_REGEX_RECURSIVE BOOST_HAS_ICU=1 BOOST_ FILESYSTEM_VERSION=3 BOOST_CHRONO_HEADER_ONLY BOOST_SIGNALS_NO_DEPRECATION_WARNING".
As you might guess from the experimentation I got none of these to work. The error that I was getting has remained exactly the same.
One difference that I assumed between the Win and Xcode version is that Win separates the values with a semi-colon whereas Xcode separates with a space.
My only other thought is maybe I edited the wrong field. Is BOOST_PREPROCESSOR_DEFINITIONS the one?
As a final comment, the thread you gave me and my issue really comparable? I have other projects that don't use the boost::regex libraries and they build and run without issue. It's only when I try to use boost's regular expressions in a release build that I get problems when linking (debug build is still fine).
Also the link error looks different. The thread that you gave me points at "boost::system::error_category" as not being resolved, while I have problems resolving "boost::re_detail::get_mem_block".
I don't seem to have problems with basic boost - just the regular expression stuff.

Issues with timecode remapping when transcoding from 24fps to 23.976fps

I'm trying to transcode a RedCode reference QuickTime at 24FPS into a DVCProHD QuickTime at 23.976FPS. I've enabled "Frame Controls" and "Set duration to: so source frames play at 23.98 fps", and I get a one to one mapping of frames from the original R3D reference QuickTime to the DVCProHD QuickTime, which is what I want. The problem is that compressor is applying a 1000/1001 conversion to the start timecode for the original QuickTime: for instance, if the start timecode of my 24fps clip is 01:26:10:14, the start timecode of my transcoded clip becomes 01:26:05:10, which corresponds to applying a 1000/1001 conversion to the timecode. That's definitely not what you want, as it makes it very difficult to go back to the original media based if you edit in Final Cut Pro with the new media.
So the question is: is there a magic setting which tells Compressor not to mess with the start timecode of a clip and just copy it from the source to the destination?
On a related note: RedCode reference QuickTimes appear to have two timecode tracks: the first one seems to be "run" timecode (increments as long as the camera is capturing), the second one is "time of day" timecode (or I'm guessing that it can be synced to an external timecode source). Compressor seems to pick the first timecode track as the one it copies to the destination QuickTime: is there a way to tell it which timecode track it should read from?

Any luck altering the layout of the Timecode tracks in QT Pro? Having never done this myself for a RED-sourced file, that would mean either setting one above the other other via the layer number (the small box under Visual Settings) and/or toggling tracks On/Off.
Also, to go in a different direction, any luck with Cinema Tools' Conform feature? You should be able to open up your 24fps QT clip and conform it to 23.98fps. Or do you still get the 1000/1001 remap there?

Poor Image Quality when Printing PDF from Office 07 using Acrobat 9 Pro Ext

Hi there,
Hoping to figure out why my images (jpegs, gifs, pngs, etc) seem to print in very poor quality when printing from Powerpoint and Word 2007?
When I actually print out the pdf onto paper, the images seem fine. The image quality is also good in Word and Excel
I did not have this problem using Office 2003 products.
Is this a common problem? I realize that the problem maybe Office related but any help or information appreciated.
Thanks

If the images' file format is PNG or TIFF you could play with the compression settings available in Acrobat's Preferences.
Edit > Preferences > select the Category "Convert to PDF".
In the"Converting To PDF" pane, select PNG or TIFF.
Then, click on the Edit Settings" button.
For either image format you could try one of the Lossless compression routines.
Be well...

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

Issues with image centering when printing from CS5

Similar Messages

Maybe you are looking for