Issues with installation

When I go to install software & after I enter the correct password for the installation, my computer does not start the installation but just stays on the installation screen.  Any idea on what is going on?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Similar Messages

  • Issues with Installation Oracle 10g over Vista Home premium

    Hi All,
    I was trying to install Oracle 10g over my laptop which has Vista Home Basic Edition.
    After the installation got completed, i got a prompt for Configuration of Net Services without which i was unable to connect to any of the database through the
    sql prompt.
    Can you just guide me through the steps for configuring the Net services so that i am able to login through sql prompt and connect to a database.
    When ever i try loggin in, i am getting back an error as " No TNS listeners could be found."
    Please guide me through the steps so that i am able to connect to the database.

    Did you created the database with installation? If not then first try to create database with database configuration assistant.

  • Abort issue with installation CS6 (payloads)

    Dear all,
    Since I wanted to find out if CS6 products would pay out I wanted to install the trial version of the CS6 (MC) but got the below mentioned error messages during insallation process of PremierPro, Aftereffects, Indesign, Illustrator.
    I thought it would come form permission issue in the registry but what makes me wonder is that the reg  key in brakets (I think that is the key name) is not found in my registry hive.
    I worked with CS5 since long time smoothly, never had such an issue.
    --> My system for the Trial: Win7  /64bit / AV and Firwall disarmed for installation/ working as Admin / Highend HW
    Any Idea what interrupts the installation of the payload units?
    What does these Payloads require to settle? What are they good for?
    Thanx
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
    MSI Error message:
    ----------- Payload: {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1 -----------
    ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
    ----------- Payload: {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148 -----------
    ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
    ----------- Payload: {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.1 -----------
    ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com
    ----------- Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 -----------
    ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR: DW050:  - Microsoft_VC80_CRT_x86: Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x86): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed

    Sorry - I missed to say that I had tried to install them manually but it failed the same way - what could be the reason? (And I also downloaded the once that where suggested for download)
    Which areas of Windows need to be accessed here for the installation?

  • Issues with installation and Error codes afterwards ...

    So this morning getting on my computer I was going to watch youtube videos, and it popped up saying that my adobe flash player was out of date.
    Fine and all, I went to update, and when the .exe finished downloading I launched it, and the Adobe Flash Player installer popped up, and its was blank, didnt do anything.
    I did some searching around and found that a way around it is downloading the offline installer, which a member of this board posted links to very often. But everytime I tried following these links it was giving me a 404, so I did some searching around, ended up a the download center Adobe Flash Player - Downloads and downloaded this one : Download the Windows Flash Player 15 Plugin content debugger (for Netscape-compatible browsers) (EXE, 16.84 MB)
    It installed just fine, my videos and .swf files loaded again.
    But now I've run into another issue, when I load a youtube video up, I get a couple error codes, here they are
    Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
    Now, I've googled these errors, and looked at the help section on this site, and both of these have nothing to do with the issue I'm having, they seemingly pop up for no reason, when I hit dismiss all or continue the video plays just fine. But I would really rather not have to deal with this popping up every single time I go to watch a video.
    I dont know if it has something to do with plugins I'm using or the browser, I'll do some more tests meantime but I'll list what Im running below :
    Windows 7 Ultimate 64 bit
    Using the Opera Web browser
    The only extension that I believe could be causing an issue, is Youtube Center, but the only thing that really changes is the way the video loads, I'll try disabling it and seeing if that changes it but I'm confident thats not the issue here.
    If someone could help me out with this I would really appreciate it.

    useduser wrote:
    Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
    You get this because you installed the debug player.  Uninstall it, and install the standard players from
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)

  • Viewmail for lotus notes - Issue with installation

    Hello there,
    We just did an upgrade from an older version of unity and call manager (4 to 9)
    There unity was tied to lotus notes. 
    We are having an issues configuring the Viewmail for lotus notes client.
    we are using the following installation guide
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/vmn/release/notes/851cucvmnrn.html
    on theCreating a ViewMail for Notes Account in Notes section
    step 2 (we are using notes 8.5)
    it says from the file menu select open then lotus notes application then Install VMN
    that menu option is not there at all.  Please help
    we have a menu under file then application.  however there is not Install VMN option
    we are on connection 9.1.1a however the issue seems to be with the client not matching up on the install instructions
    thanks

    Please check the below docs . Looks like the EOL for IBM lotus with cisco UC has
    ended a long time back. 
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps9830/end_of_life_notice_c51-546834.html
    http://www.cisco.com/en/US/products/sw/voicesw/prod_category_end_of_life.html
    The above is the reason why you probably do not see the install VMN option.
    Hope that helps!
    Regards,
    Karthik Sivaram

  • Issue with installation of ofm application adapter

    Hi,
    I'm new to application adapter for SAP in 11g.
    I was working on an integration scenario between oracle-ebs and sap using ofmw 11g (11.1.1.4).
    When I'm trying to install ofm_adapters_application_generic_11.1.1.4.0 (downloaded from OTN).
    When executing/running "iwora11gPS3_application-adapters_win.exe", getting following error:
    __"Error while checking for instances  an error occurred while trying to manage the selected instance"__
    configuration is as follows:
    Machine: windows virtual machine
    OS: Windows Server 2K3, Service Pack 2
    DB version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
    JDK Version: java version "1.6.0_21" ( installs default along with Weblogic)
    FMW: Oracle SOA Suite 11gR1 (11.1.1.4.0)
    Could someone please help here as to what could be the reason, why this error is coming and how we could resolve this.
    Regards,
    newbie.

    From our experience, we decided to have our server re-imaged and re-installed all the necessary Oracle Suites. We believe something in the registry was preventing us from installing the application adapter. Once we cleaned out our box, everything went well and we were able to install the Application Adapter with no error. This may not be ideal if you are in a production environment, but for development this maybe quick and clean.

  • Issues with installation of adobe flesh player

    I'm unable to install latest version of adobe player or even install clean version of it (after uninstalling). I removed all the components and still have issues as it gets stuck at 30%. Is there any way of resolving it?thanks

    Get the offline flash player installer from this link
    https://get.adobe.com/it/flashplayer/download/?installer=FP_17_Mac_for_Safari_an d_Firefox_-_NPAPI&standalone=1

  • Issue with installation of a printer hp office jet 4620.

    I was installing a hp officejet 4620 printer and messed with the printer drives, and now it don't work properly, i need to restore my drives for this printer in macintosh HD/Library/Printers/PPDS/Contents/Resources ? maybe? I really don't what to do.

    Hello Leca, I'd try this first...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Issue with installation

    Installation is not completing even after a long time too.
    Elapsed Time is continuously increasing but no increment in installation progress.
    Image :- http://www.4shared.com/dir/DOaaTdJ6/Imageshare.html
    Thanks,
    Rajdeep

    Why did you post so many informations?

  • Issue with installation of Solaris 10 UFS in Ldoms

    Hi Guys, I'm trying to install Solaris 10 with UFS but not able to make more than one partition. My vdisk is a slice of physical server hard disk.
    When I try to modify the table partition of vdisk, it fails.
    I cheeked in documentation and saw that vdisk can only be use for one whole s0 partition. How can I create swap and other partition?
    Someone have try to install Solaris 10 UFS in Ldoms with success??

    Thank a lot Pascal,
    I Also use file container and it work fine!!

  • I am having issues with installation of Abobe Acrobat Pro XI and Adobe Flash CC 2014

    I am using Windows 8 system.  I have attempted to remove any pervious versions that may cause the installation to fail.  I have tried to install from Creative Cloud several times but it keeps telling me installation failed.  I have tried rebooting system and still get the same errors.  Any suggestions would be appreciated.
    Garry L Harding

    Went into control panel and tries uninstall for Adobe Acrobat and got the following error message.
    Garry

  • Issue with installation of Common schema of Oracle BI Sample

    Hi, I am trying to install the Common schema of Oracle Business Intelligence that provides all the sample data used by the Discoverer tutorials. I have an Oracle 10g XE installed on a Windows XP box. There is no "SH" schema shipped with the XE so I created the database schema.
    Once I followed the steps and ran the script install_rel.bat, I kept getting error "ORA-01031: insufficient privileges". I think the script aborted at the command "%ORACLE_HOME%\BIN\sqlplus -L -S "/ as sysdba" @user_exists.sql SH" inside the script. Any ideas?
    Mike.

    Hello Yatan,
    To start the nodemanager, you need to browse to C:\Oracle\MiddlewarePS4\wlserver_10.3\server\bin and execute "startNodeManager.cmd" (there is no such file like startNodeManager.bat).
    "nodemanager.properties" will get created under ""C:\Oracle\MiddlewarePS4\wlserver_10.3\common\nodemanager\" once you start the nodemanager.
    You can also check the status of nodemanager from weblogic console.
    a) Login to weblogic console.
    b) Browse to Environment -> Machines in the Domain Structure panel (located left side)
    c) Click on "LocalMachine".
    c) Click on "Monitoring" tab to know the status of nodemanager.
    Thanks,
    -Pavan

  • Issue with ARD 3.0 not pushing out Installs, Says its installing but not

    Issue with ARD 3.0 not pushing out Installs, Says its installing but not
    Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
    I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
    Push it to Macs I can connect to, observe and control.
    The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

    Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
    Maybe try a smaller package on those clients.

  • Multiple issues with new installation

    I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
    The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
    1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
    The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
    2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
    3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
    I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
    4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
    Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
    Thanks in advance.
    EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
    Last edited by ugugii (2009-06-14 00:57:37)

    People are probably going to want to know the make/model of the lappy before they can
    help.
    Deej

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

Maybe you are looking for