Issues with intel ARD clients

Blithely installing ARD from disk to update the client on a new intel I seem to have hit a snag.
The machine is no longer accepting observe or control requests. Can see what's happening in the scanner window, chat and get reports etc but no control or observe.
Tedious issue. Any ideas?

That may be your problem. The native ARD client for Intel (2.2.1, I believe) is, to the best of my knowledge, only availble on the install disks that come with the iMac and MacBook Pro. I think perhaps your installation overwrote the Intel-native ARD client with the PPC version, which is trying to run under Rosetta and failing to run correctly. I'd suggest reinstalling the ARD client from the iMac's install disks. I'm not sure if Pacifist, a utility to extract particular packages from the install disks, will work with the Intel Macs or not. If not, then you may have to reinstall Mac OS X.
Hope this helps.

Similar Messages

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • Issue with  pl/sql client

    Hi All,
    I am getting issue with pl/sql client saying readonly access to DMPROD(database).
    could you help me out..what might be causing this problem or how to overcome it?
    Thanks a lot.

    tvenkatesh07 wrote:
    Hi All,
    I am getting issue with pl/sql client saying readonly access to DMPROD(database).
    could you help me out..what might be causing this problem or how to overcome it?Well, it could be possible that your user, with whom you are trying to connect, is having only read-only access to the db? Did you try to change the user?
    Aman....

  • Sign in issue with Lync Mobile client

    Hi guys,
    I'm trying to deploy a reverse proxy for mobile and external users, but I am having issues with the mobile client for android. It keeps saying "an unknown error occurred". Please try again.
    I've got the log zip file outputted by the client here if someone could have a look and point me in the right direction? I've set
    up server farms for the webservices, meet, and dialin.
    Desktop clients can log in without any issue btw.
    Cheers,
    Gareth L. Armstrong

    Verify from DNS Configuration and Check what is causing this issue from
    Lync Connectivity analyzer
    Also to troubleshooting Lync mobility, you can refer below link
    http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • SERIOUS lag issues with Intel iMac

    Hello everyone,
    I'm pretty frustrated right now. I've been having this serious lag issue with my new iMac for the past few days. I think it may have started after I ran the last security update.
    What happens:
    When switching between apps, the system will hang for 1-3 seconds between doing anything. This includes typing, mouse requests, etc. It's VERY frustrating. I have activity monitor open currently, and I am seeing both Safari and SystemUIServer hogging up the CPU resources like CRAZY. I've even seen Safari recently give a CPU usage of 120%, right before I loaded this webpage. tis isn't just centralized to Safari too.... I have the following apps running:
    Adium 0.89.1
    FoireFox 1.5.0.8
    Safari
    Activity Monitor
    My Memory stats currently are:
    175MB Wired
    708MB Active
    618MB Inactive
    1.47GB Used
    There should be no reason I'm getting these lags with just two web browsers and a chat client open.
    Has anyone else expierenced the lags?? Any suggestions? I'm almost ready to reinstall OS X and not run the last security update. Thanks
    iMac 1.83 GHz Core Duo   Mac OS X (10.4.8)   1.5GB RAM, Extermal LaCie 160GB FW Porsche Drive, Griffin iMate, iPod Min 4GB, JBL Creature Speakers

    Hello Matthew
    Are you running any maintenance scripts on a regular basis?
    http://www.thexlab.com/faqs/maintscripts.html
    I would manually run this script from The X Lab, and my load times would improve greatly. The problem was, I would forget to run them untill I noticed web pages loading slow or iTunes and iPhoto taking for ever. It wasn't untill someone here in discussions suggested Anacron that I saw the light. WOW what a difference Anacron has been making in my overall system speed. My iMac has not been shutdown for 11days 5hrs 34mins (sleep or use only) and opening new App's, switching App's and web pages load as fast or faster than after a fresh start up. If your system is operating properly and you are having only what seems to be a slow or sluggish issue Anacron will make a difference.
    http://members.cox.net/18james/anacron-tiger.html
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.8)   Maxtor 300GB FireWire 2G Nano

  • Driver issue with Intel ICH9M LPOC Inte. Controller post windows 7 upgrade

    Upgraded from vistahome premium to 7 proffesional and have hardware issue with this device
    on Intel(R) ICH9M LPC Interface Controller - 2919
    The drivers for this device are not installed. (Code 28)
    There is no driver selected for the device information set or element.
    To find a driver for this device, click Update Driver.
    Went to intels website and could not find driver for 7 (there were drivers for vista & xp)
    Any idea where to get driver for this

    Hi,
    It really helps us help you when you identify your notebook with its complete product name or product number and include it in a post in you thread..
    Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name (p/n). Post one or both of them (with all alphanumeric characters here). 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Windows 8.1 Data reordering issue with Intel Adaptors

    According to Intel, there is a data reordering issue with their adaptors and probably this dumb WIDI software. This is from Intel site. they say some are fixed, "A future Windows 8 fix will address this issue for other Intel wireless adapters." I
    have one Nope, still broke. I get drops all the time. Brand new Toshiba laptop I7 16 gigs of ram and a SSD and a 2 gig Vid card. Would be nice to be able to play games but I get dropped all the time. Now would Microsoft quit hiding
    about this, and fix the darn thing. Also i'm a system admin for 13 years. I have build over 1000 PCs and servers. I know bad software. Please fix this. PLEASE. Its not going to just go away and its not just Toshiba, I have seen other companies with the
    same problem. If there is a Fix PLEASE POST IT. Or even a workaround I have tried everything.
    http://www.intel.com/support/wireless/wlan/sb/CS-034535.htm
     

    Hi,
    Have your first tried the software fix under this link for your network adapter?
    http://www.intel.com/support/wireless/wtech/proset-ws/sb/CS-034041.htm
    Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
    Also, you can try to check if there is any driver update under Device manager from manufacture's website.
    Kate Li
    TechNet Community Support
    Yep didn't work. Still get drops all the time, had to run a Cat 5E cable to my laptop from my modem, because I have Atheros Gigabyte Lan adaptor. Works Great. The Wireless still drops all the time. Has Microsoft let out the patch to fix this or is it coming in
    April in the 8.1 patch that's coming. Funny thing is all for Widi, I don't even use widi, I got the software to do that from Samsung works better on my TV. Intel and Microsoft need to get this fixed. because their driving off gamers and that's the
    people that make sure they buy Microsoft so they can play games. With the wireless link dead and a great laptop worthless what's the point. Ive been in IT for 13 years building PCs  and Servers how I knew how to run a 60 FT Cat 5e line thru
    a 2 story house and terminate it. Most people don't. Fix the problem.  

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SL Server Permission Issues with Windows XP Clients

    I'm running into some permissions issues with Snow Leopard Server. I know it's specific to SL Server because I have two Leopard servers and neither one is affected. All servers are set up the same way.
    I'm using this SL server as a file server in the golden triangle approach: AD for Users, OD for Groups that supply AD User membership. I have one volume per OD group, and that group has read/write privileges to that volume via the default Server Admin read/write ACL. POSIX permissions are 770 on the top level directory, and ownership is set to the AD user who owns the volume, and the OD group the volume belongs to.
    The client is XP SP3. When the client accesses a share on the SL server, their access is correctly granted and they can browse the share and read any files inside the share. They can copy files to the share from wherever. They can open, edit, and save files. However, they cannot rename or delete files within the share. They cannot rename folders, but can delete them. This affects all AD users regardless of the OD group they're in.
    I have a few Windows 7 and Vista clients on the network, and these two OS's are not affected by this so the problem is limited to XP. If I create a user in OD, and auth to the sever from the XP client as that user, the problem goes away, so it's something to do with AD and SMB.
    I do have a ticket in with Apple support, which was escalated to Engineering. Still waiting on that.
    Things I have tried that have not worked/helped:
    -Modify the ACL to Full Privileges
    -Tried removing/re-adding user to OD group.
    -Remove darwin_streams from vfs_objects in smb.conf
    stream support = no
    ea support = yes/no (tried both ways)
    darwin_streams:brlm = no
    -Added nt acl support = no to smb.conf
    per http://bit.ly/6aYycW
    -Animal sacrifice..... ??
    Help?

    I need to do more testing, but I think the fix is to add "acl check permissions = no" to the bottom of /etc/smb.conf:
    ; Site-specific parameters can be added below this comment.
    [global]
    acl check permissions = no

  • App-V 5 SP2 install issue with Intel NIC Driver 11.16.96.0

    When deploying App-V 5 SP2 using SCCM 2007 it will install with no problem on the machine.  However, when the user reboots after the install the machine will blue screen.  The user then reboots again and machine comes up to the desktop.  However,
    the App-V service is not running and is still set to automatic.
    Looking at the Blue Screen dmp file the common theme looks to be a conflict with an Intel NIC driver version 11.16.96.0.  Machines running an older version of the driver do not experience the issue with the blue screen after reboot and the App-V service
    starts with no issues.
    Has anyone seen this issue before?

    Version 19 appears to be the latest: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18713&lang=eng&ProdId=3025
    Have you tested with this version instead?
    Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
    answer your question). This can be beneficial to other community members reading the thread.
    This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
    Twitter:
    @stealthpuppy | Blog:
    stealthpuppy.com |
    The Definitive Guide to Delivering Microsoft Office with App-V

  • Inherent ground Loop/audio hum issue with Intel Core 2 duo?

    Has this ever been resolved? I can't find a definitive solution:
    We're a recording studio and have put a 2.16 Intel Core 2 Duo,
    667Mhz running OSX 10.4.11 into service for a second workstation.
    The audio I/O device is an Apogee Duet Firewire audio interface.
    The Mac delivers a continuous 60 hz hum to the audio signal on the
    output.
    Tried a ground lift which did not resolve it at all.
    Audio is clean on the headphone-out of the interface btw.
    Based on searches, discovered this is a known/reported issue with
    a number of Mac models - tho i've not found specific fix for this
    particular model if any exists.
    Apparently a Mac defect. Any suggestions?
    We are a pro audio facility and things like cables and external devices
    have been tested and ruled out. All definitely points to an internal
    issue w/ the machine.
    There are numerous old threads about CHUD developer tools(?)
    But, NO version I've downloaded (i think we installed/deinstalled
    'em all) has offered this "Nap" processor-adjustment option that is talked
    about as having "fixed" this hum issue for MDD G4 and Intel G5 model users.
    Love to hear from anyone who can help on this...Hate to have to dump a nice
    Imac for this. (Everything's perfectly quiet about it except the audio out -
    that kinda blows ; (

    Hi, checking back in on this. OK, running a Macbook in place of the IMac with the same Apogee Duet firewire audio interface, the hum is not apparent on the output.
    The iMac has a ground lift. All suggests that this is a known internal intel iMac problem and hope any fellow users could give me some idea of how to correct it before I must relegate this one from studio to office use. (we simply have to have clean hum-free audio monitoring...don't think that's asking too much eh?)
    Again, there've been posts going back over the years about some form of developer tool adjustment that enables putting intel machine processors into a "Nap" mode.
    Is there a version of the CHUD tools that will offer this option on this model?
    (intel 2.16 core duo - 10.4.11)
    Thanks for any other ideas
    Mike

  • [UNSOLVED] Graphics Card Issues with Intel 945GSE

    I have several issues and im not sure if they are related to the same reason. But I think it all has to do with my graphics card not being detected right.
    I have a Samsung N310 with 1,6 Ghz and 2Gb RAM and am using Gnome. If i go to "System settings --> System information" it shows me "Graphics: unknown".
    Since my new installation i dont have an xorg.conf anymore, and i did not experience any disadvantages yet, but before my graphics card was detected as following in the xorg.conf:
    "Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)"
    In the Gnome System information it was not listed though, like now.
    This is not really a problem, but it made me think that my other issues could be related to the card being not detected right.
    Here are my real problems:
    When i am watching a video on my external monitor i have slight lags, which are really annoying to me,
    because im a big fan of a good picture!
    It is explicitly visible during pan shots or when cars a moving from the one side of the picture to the other.
    And the larger the file is, the worse it gets... The lag with dvds or large mkv-files is even worse and not watchable anymore!
    My machine should be capable of running a film on fullscreen on an external monitor though, at least it does under XP on the same screen. Flawlessly!! And since arch is a minimal system, it should work! I am experiencing these problems with gnome2 and xfce as well, so it cant be related to gnome3!
    Im also experiencing lags with the Gnome shell, for example when i move my mouse to the activities button in the upper-left corner or when i am moving windows with the mouse.
    And last but not least firefox is very laggy while scrolling. But since even users with faster machines experience slight problems of that matter with firefox, i dont think that this problem is related to my card.
    I could stand the issues with the Gnome shell and firefox, but i at least want to be able to watch a film with my computer!
    I hope that my computer isnt simply to slow...
    Greets
    Last edited by gunjah292 (2011-12-21 20:09:44)

    gunjah292 wrote:
    HAHA!! The trick was not to enable VSync but to disable it!
    I just changed the SwapBuffersWait Option to "false".
    I have around 300 FPS now and my video lag problem is GONE!!! Thanks for the tips! I will mark this solved now!
    Well, that's a surprise for me.  I had to enable VSync to stop video tearing with my Intel HD 3000 GPU (Sandy Bridge).
    From the Intel xorg driver man page:
    Option "SwapbuffersWait" "boolean"
            This option controls the behavior of glXSwapBuffers and glXCopySubBufferMESA calls by GL
            applications. If enabled, the calls will avoid tearing by making sure the display scanline is
            outside of the area to be copied before the copy occurs. If disabled, no scanline
            synchronization is performed, meaning tearing will likely occur. Note that when enabled, this
            option can adversely affect the framerate of applications that render frames at less than
            refresh rate.
    Default: enabled.
    Glad you got it sorted!
    Last edited by David Batson (2011-12-14 23:21:57)

  • Issues with intel graphics

    Hello everybody.
    I recently installed arch on my new laptop (lenovo z460, core i3, intel graphics), and I'm facing issues with graphics: every time I execute some 3D application the X is crashing.
    I use kde4 as window manager, but did a test on gnome and faced the same issue there, so it does not look like a WM issue.
    The applications I tested so far are the video players using gl as video output and games like openarena. Video players using xv as video output with composite disabled runs well.
    Searching on the forum, I saw an old post with an issue similar to mine, saying that this is an issue introduced in ligbl 7.4.2, but I cannot even downgrade to this version since I cannot find it anymore.
    One more information that may help, I did a try with arch 32 and 64 and faced issues on both, but I also tried on kubuntu 10.04 LTS and this issue does not happen there. Unfortunately I am not that experient to understand the differences and find a solution
    Do you guys have any ideas on how to fix this issue? I really don't wanna use kubuntu...
    Thanks

    Kubuntu likely has older versions of Xorg and the intel driver. If you look into /var/log/Xorg.0.log on both Arch and Kubuntu, it should be possible to find out which version works and which don't. You can then see if you can find the working version in the repositories.

  • Linux NSS DB Issue with Personal User/Client Certificate Friendly Names.

    I have an issue with the NSSDB lib and my browsers in which client certificates I use for an application (Nessus Vulnerability Scanner) show up in the list with the same friendly name/nickname, making it very difficult to distinguish which certificate goes with which server.
    Each certificate is generated on a different server with a different hostname but the same username. Upon importing the certificate into my browser, or even the pk12util command, the first certificate will appear correctly. However, importing additional certificates will just reuse the nickname from the first certificate instead of the nickname I chose. I have tested many different scenarios, and it doesn't seem the problem is related at all to the content of the nickname, so I have no idea how to force it to work correctly. I've searched around and found some indications of "nickname conflicts" and things, but nothing that helps me resolve the issue. I'm not sure if it's a bug or if it's some weird condition I've encountered.

    Maybe try to ask on the mozilla.dev.tech.crypto news group.
    *https://developer.mozilla.org/en-US/docs/NSS
    *news://news.mozilla.org/mozilla.dev.tech.crypto
    *http://groups.google.com/group/mozilla.dev.tech.crypto

  • Does anyone else have display issues with Intel X3100 graphics and OS X Lion?

    I took the screenshot below to demonstrate one issue I have had with graphics since upgrading to OS X Lion. I use a Late 2007 MacBook with 2.0GHz Core 2 Duo and the Intel X3100 graphics chipset. I have 4GB RAM. Had to reboot to get this to correct itself. The problem is the menubar (obvious) and the desktop image is missing, replaced by the grey.
    I have an external monitor connected (second image) and everything displays properly there.
    Some other issues I've noticed are using Mission Control sometimes yields unpredictable results, graphically speaking, and the fullscreen apps don't always allow me to see the menubar. These all seem graphically related. Is this a hardware or software problem? Any solutions?

    Here is another display issue with my machine...perhaps software rather than hardware? The icon for the rtf file "Matt Passages" is missing entirely. There is a faint rectangle present instead. The same file has an icon in the first image posted above. No change to the file since then. And two other RTFs have the icon! Odd things with Lion.

Maybe you are looking for