Issues with Intel Rapid Start in Lenovo U310

I have a lenovo U310 with 500 GB HDD and 24 GB SSD. Both drive are working fine. However, when I boot my computer and reach to the desktop, I receive the error saying Intel Rapid Start Technology is not enabled. When I checked the BIOS, the Partition type for iRST appears to be INVALID. Also, I tried to download and install the driver for iRST from the Lenovo website. It installed properly, but at the end it said install the driver and finish. When I hit the finish button, I received the error saying the minimum requirements are not met.
So, I have 24 GB SSD installed. But why am I getting the error and how to fix it?
Help will be very much appreciated

The B85 supports Intel Rapid Start Technology, see one of the user guides on intel site, but it needs BIOS support.
The B85M gaming don't have it on specs page but looking at it's manual it has rapid start settings in BIOS.

Similar Messages

Thinkpad W530 and Intel Rapid Start Issue

Hi there, I have a Thinkpad W530 and am having an issue with Intel Rapid Start. When I enable it, it works fine. Once. When I bring the computer back from the S4 state everything is working just fine. But the Intel Rapid Start service disables itself. I have to re-enable it each time I want to use it. Any ideas? Thanks! Charlie Durand

This is happening for me too on my X1 Carbon, having wiped it and installed Windows 8 manually. Rapidstart will work fine the first time I turn it on, but then it'll pretty much say it's done with me until I switch it back to "on" again.
Having to check the manager each time is rather tedious, so I'm going to turn it off (edit:uninstall!) and use hibernation until a fix is published.

9470m Intel Rapid Start, Intel Rapid Storage. Is it working?

When we image our Elitebook Folio 9470m SSD notebooks with Windows 7, part of the imaging process is to install Intel Rapid Storage and Rapid Start on all these notebooks. We download the drivers from the support.hp.com driver download page for Windows 7 Profession 64-bit.
The software/drivers installs successfully with no errors, but as far as I can tell, the laptops are not booting or shutting down faster than other model laptops with SSDs that do not have this software installed. May even be slower, because it seems like the Rapid Start Technology is hanging and delaying the the shut down process when we shut down the laptops.
We have verbose status messages enabled, so when shutting down the laptops, we often see a message saying something that roughly says in other words "waiting for Intel Rapid Start Technology to shut down."
What is installing this software really accomplishing and is it effective on SSD disks and disks that have full disk encryption installed?
How can I tell if this software is doing the job it is supposed to be doing or maybe we should stop installing it on our notebooks all together?

Are these using regular 2.5 inch SSDs or mSATA mSSDs? I suspect the issue is with Intel Rapid Start. That is solely for the purpose of hibernating and recovering from hibernation faster. It really serves no other purpose and works optimally with an mSATA cache drive (which your model does not have) but does improve resume from sleep on any SSD. Intel Rapid Storage enables native command queing but that is in place anyway if the storage controller is set to ahci. I would also suspect that if your drives are encrypted fully, then Intel Rapid Start is having a problem trying to write startup information to the drive and that accounts for the hang at shutdown. Do you configure the laptops to use hibernation?
I would get two otherwise identical machines and configure one with and one without Intel Rapid Start and see if you notice any difference in bootup and shutdown time. Even on those where you have already installed Rapid Start, it can be turned off in the BIOS, thus disabling it. Personally I do not use hibernation so I do not enable Rapid Start in the BIOS and do not install the software. Rapid Storage should not cause a problem.

Lenovo IdeaPad U310 Intel Rapid Start Technology with WIndows 7 Ultimate

Hello,
I have upgraded my Windows 7 Home Premium to Ultimate. Got it in my domain and everything seems normal . But I wanted to check the options of that energy saving settings and can't find any information about, when does my computer go to hibernate. He does use the stand by, but for how long? Until the battery is low? That makes no sense.
The computer must go in hibernate or is this with ultrabooks going other ways?

Hi
I have further investigated and found a solution for hibernation
In order to enable hibernate in Lenovo Machines SSD support models, you will need to restart and Enter into the BIOS Setting
1. Press Fn+ F2 to enter BIOS
2. Choose "Configuration > SATA controller working mode" as "RAID";
3. Select "Configuration>Intel Rapid Start Technology", choose " iRST Support" and "Entry on S3 critical battery event" as "Disable";
. It will then automatically return to an available Windows power options setting. However, iRST (Intel Rapid Start Technology) does not have the ability to wake a system from hibernate.
Now restart the system and you will find hibernation option is enabled under power option
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Intel Rapid Start (30 Day Standby) with 32 GB RAM

Recently I bought new W540 with 8 GB RAM. Intel Rapid Start operated normally in this configuration. But when I upgraded RAM to 32 GB it hangs the laptop on second resuming from S4. I've done all the procedures to set it up properly: hibernation partition (35 GB) with id=84, latest drivers and so on.
So first time it goes to S3 (sleep), then S4 (hibernation by Intel Rapid Start) and successfully resumes from S4. Second time it goes to S3 and S4 too, but on resuming I see just black screen and blinking power button. This goes infinitely so I have to power off the laptop pressing power button for about 5-10 seconds. In case "Automatically restart" option is enabled in "Startup and Recovery" options, the laptop is just turns off.
So it is a system failure. When I boot the laptop after the failure, I see something like this in the system event log:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000008, 0x0000000000000000). A dump was saved in: D:\MEMORY.DMP. Report Id: 080114-229025-01.
I reproduced this behaviour in the factory installation, installed all Windows updates, updated Lenovo Power Manager, updated BIOS firmware, disabled all non-Microsoft services in msconfig, uninstall Lenovo Power Manager and install original Intel Rapid Start software (to test pure Intel technology). I reproduced the bug after every change described above. Next, I try two another RAM configurations: 16 GB and 24 GB. With 16 GB it operates normally, with 24 GB the problem reproduces.
Model: 20BG0035RT
OS: Windows 7 Professional SP1
RAM: Kingston HyperX DDR-III SODIMM 16Gb KIT 2*8Gb PC3-12800 CL9 (KHX16LS9P1K2/16), successfully passed full test by F10

Sorry if this thread is too old, but this keeps bugging me so I'm bumping and responding. I have the same issue with 32GB of RAM where I can resume once after a reboot, then the system won't quite power on on the second resume cycle. I've noticed that if I hibernate the system, I can also use Rapid Start once again. So I can alternate between a (slightly slower) hibernate resume and a (slightly faster) Rapid Start resume Of course, it seems like a pretty silly use of HD space to maintain both a 16gb hiberfil.sys and a 32GB hibernation partition.
The problem doesn't exactly seem like it should be RAM related, but rather something about the system powering up again following a successful IRSRT resume cycle.
I can't figure out what's causing it but it keeps frustrating me! There do seem to be other systems that handle the 32GB of RAM so there must be something with the BIOS implementation in the W series. I don't think it's a limitation of the software.

(Re)activate Intel Rapid start technolgy (RST) & RAID @U310

Dear community,
I have been frustrated about this for long time. Got U310 with win8(24GB SSD+500GB HDD).
People says I should set RAID in BIOS. But I got only error and cannot do recovery. So I set back to ACHI mode and system restored. Then error: "Your system does not apear to have Intel Rapid Start technology enabled".
- Yes, I have tried to set BIOS ACHI to RAID, no start.
- SSD 24GB is in device manager, not paritioned.
- intel RAID software installed
- So the point is: I have to activate in BIOS ACHI to RAID, but then Pc will not start.
So whats is the problem?
Now the partitions looks as this:
Could anyone help me, how to reactivate the RAID/ fast caching technolgy of RST?
Another frustration is: how to backup my system(win8) to USB media, so that I could restore factory state?
appreciate any advices, thanks in advance!
Signature on work
Solved!
Go to Solution.

Hi, bradlutz1
thanks for your reply! How do you identify it is defective? You have now a RAID enabled U310 or U410?
My SSD HD can be manually partitioned and use as a normal R/W HDD. Just it cannot set to RAID I think, which should be set to before install windows 8. checking into BIOS, the Intel Rapid Storage technolgy (iRST) is enabled. But I still have problem( see screenshot): How does it look like for yours?
On the other side, I use windows 8 recovery programm created a USB drive as recovery media. I want to use it to reset /recovery my PC to factory default with RAID eanbale.
First I set BOIS to RAID. Boot from HDD, but still failed, it says (I think AHCI could go thru):
Seeing from the partition picture in my first post, I think the last 20G partition is Lenovo recovery, but how to backup it and restore?
Very annoying also, the Lenovo program OneKey Recovery program 8.0(for win8) gives no option to create factory DVD/USB media, while its ver. 7 did:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT051300
http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT071791
BTW: my PC starts within 30s to login screen (w/o iRST), is it OK?
Signature on work

W530: Intel Rapid Start/Smart Response tech/Lenovo Enhanced Experience

I have W530 configured by Lenovo for RAID 0 with two HDDs. I was wanting to install a mSATA SSD. I've seen two Intel Technologies and the LEE 3 (listed in the subject) that you can utilize if you have an mSATA SSD. I want to know if the two Intel techs are actually different programs or just different names for the same thing. In this lenovo thread, they seem to be used synonymously. However, I have found to pdf files that contain different instructions on how to set them up: here and here. The ladder seems like it was intended for a specific motherboard; however, the intel programs downloaded are different in both pdfs. Can anyone shed some light on whether or not these are different technologies, and if so, what the differences are.
Lastly, the Lenovo Enhanced Experience looks like a combination of the Intel programs. It seems that they just slapped there name on Intels programs Anyone know anything on that?
Thinkpad W530, i7-3720QM, 1920x1080 screen, 12GB 1333Mhz RAM, RAID 0 2x 320GB 7200 RPM HDD, Quadro K2000M, 6-cell battery, Bluetooth 4.0, Intel Centrino Advanced-N 6205 AGN

Also, I was looking at the tabook.pdf and it shows the W530 uses the Mobile Intel QM77 Express Chipset. The first pdf I posted showed that the Intel Z68 Express Chipset was required for the Intel Rapid Start tech. is the W530 compatiable with either of the Intel Techs?
Thinkpad W530, i7-3720QM, 1920x1080 screen, 12GB 1333Mhz RAM, RAID 0 2x 320GB 7200 RPM HDD, Quadro K2000M, 6-cell battery, Bluetooth 4.0, Intel Centrino Advanced-N 6205 AGN

Iissue with Bios update 52 on yoga(intel rapid start disappear)

Hi all.
I updated bios on my yoga 13 today.
It seems like that "intel rapid start" is off by bios ,and the item of that is disappear from bios menu .
I can't turn on rapid start,and can't even install IRST software.
Bios default setting is no use for it.
any help appreciated. thx

why the hell would this all of a sudden dissapear.. i have tried to uninstall and reinstall IRST and used disk part to properly label the GUID partition.. it looks like the software installs and the service starts, but there are no icons present nor is there a system tray icon. if i located the manger in program file and try to execute nothing happens.. this is a joke.. you cant just take features away from us then expect no backlash.im out of my return period too .. so you cripple my computer and then leave us ? hurr the up and find a solution to this problem immediately
Moderator note; post edited to conform with the Forum Rules

Your system does not appear to have intel rapid start technology

I have a Lenovo U310 with windows 8 and wish I could take it back. Problem after problem with this computer, both hardware and software related. I started getting this message about the Intel rapid start a couple of days ago. I went into this forum and one of the specilists suggested going into BIOS and change the SATA controller working mode to RAID and to enable IRST which I did. Now the computer can not start. It tries to load and it says that the recovery system failed. I can get to the BIOS menu again but I wont let me get to configuration screen. Any help would be much appreciated. thanks
Solved!
Go to Solution.

hi yzarate,
I'm sorry to hear what happened,
If the system is giving you a failed to start Option, Restarting it May sometime give you option Like Safe mode,
If you're getting that, select that option and it should be able to start you system while in RAID then restart the system again once booted back up.
If you're not getting that message I would suggest go back to BIOS
go to the Exit TAB, Select Load optimized default or press F9 to load defaults, F10 to save and Exit and hit enter,
Try loading BIOS again and see if the configuration tab will be available,
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to use Intel Rapid Start technology on my ThinkPad Edge 531 computer?

I have a Thinkpad Edge 531 (model 6885-73G) preloaded with Windows 7 64bit. According to the appropriate user guide (see Thinkpad E531 User Guide - page 108) and chipset specifications Mobile Intel® HM77 Express this ThinkPad model supports Intel Rapid Start Technology with a special partition on the SSD M.2.Such an SSD with the specification M.2 (see MyDigitalSSD Super Cache 2) I bought it and installed successfully on my ThinkPad, which can run a cache software FNet HybriDisk on.
However, even if I proceed exactly according to the installation script by Intel, see (Intel Rapid Start Technology User Guide) or by the installation script by Lenovo community, (see Edge E330 and Intel Rapid Start), I can not put into operation Intel Rapid Start Technology on my ThinkPad, although I use the installed SSD disk with an alone partition of appropriate type (with ID type 84 on MBR) with more allocated space than the size of RAM for my ThinkPad and with the currently deployed version of BIOS (1.29) and current drivers, such is Intel (R) Rapid Storage Technology Driver version 11.1.5.1001 downloaded from the webiste of Lenovo support for this model ThinkPad Edge 531.
Since, in my opinion, based on the above specifications declared by the manufacturer Lenovo and Intel, this ThinkPad model should support Intel Rapid Start Technology, I would like therefore to know how this technology on my ThinkPad to put into operation, because of which I also bought this ThinkPad model. Does exist for this model ThinkPad Edge 531 some specific deployment scenario of Intel Rapid Start Technology? Does anyone have any practical experience with the launch of this technology on those ThinkPad models? Can it be expected that the full support of Intel Rapid Start Technology for the ThinkPad Edge 531 will occur after the release of a new version of the BIOS or a new version of Solid State Drive Firmware Update Utility with support for MyDigitalSSD Super Cache 2 published on the website of Lenovo support?
Thanks in advance for any advice and guidance with the launch of Intel Rapid Start Technology on my ThinkPad Edge 531.

Hi @nmulji ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY TouchSmart 15t-j000 Notebook and issues with Raid technology. Here is a link that helps with the driver for your Notebook.
You might need this update for software and drivers with the Intel Management Engine Interface.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. If something is not updated this could be causing an issue.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can SSD which is configured for intel rapid start be used to store data files as a normal drive

Can SSD which is configured for intel rapid start(No Smart Response) be used to store data files as a normal drive
Lenovo ideapad u310 with 24 GB SSD Partition , only 4GB has been configured as Hibernate partition for Intel rapid start, rest of the 18.36 GB has been labelled as Healthy(Primary partition).Can this 18.36 GB of SSD be configured to store data files on it without affecting Intel rapid start.

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

Intel Rapid Start on Ideapad Yoga 13

Hi and thanks for reading my message:
i have a problem with the Intel Rapid Start Technology on my Lenovo IdeaPad Yoga 13:
The IRST is not automatically starting after Boot. The "Intel Rapid Start Technology Service" Service is installed and set to automatic start and it's running without problems but the IRST Manager is still not running (cant's see it in the system tray of the WIndows 8 Desktop Mode). When i run it manually by calling the "Intel Rapid Start Technology Manager" (configuration window pops up), it works fine.
What i try to achieve: because IRST is almost as fast as sleep mode, i would like to use it always instead of sleep mode, so i have set the Timer in the ISRT manager to enable and 0 Minutes. So with the IRST running in the background, it is working to go to IRST Hibernate directly after sleep mode. But when i restart my Yoga, its not working any more
What i tried to do:
Install the IRST 1000 times
Re-Create the hibernate partition (using this manual) (id=D3BFE2DE-3DAF-11DF-BA40-E3A556D89593)
Check ISRT is enabled in BIOS
Do you have any other idea what to do?
Thank you very much for your help and best regards!
Manuel

That limited thing has started happening to me as of a couple days ago too. No wifi issues before that.

Yoga 13 Intel Rapid Start technology

Hi,
I've just got a Yoga 13 and on every time that I'm turn it on I'm getting an ERROR
"Your system does not appear to have Intel rapid start technology enable"
1.i didn't see a "Intel rapid start" in the bios
2. I've update my bios
3. When I've try reinstall the driver I got this error "this computer does not meet the min requirements for installing the software"
I need help.
tnx.
Solved!
Go to Solution.

hi O_hei,
If you're running on the 66cn52ww BIOS or above, I'm afraid the BIOS is limitting you from enabling the Intel Rapid Start Technology feature. For now, try to uninstall the Intel Rapid Start Technology under Control Panel (large icon view) > Programs and Features to get rid of the "Your system does not appear to have Intel rapid start technology enable" error on startup.
Upon checking, the Yoga 13 here in the lab runs on the 66cn51ww BIOS and has the Intel Rapid Start Technology feature.
Spoiler (Highlight to read)
I recommend you visit the lenovo website once an updated BIOS is released that enable this feature.
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Intel Rapid Start Technology - Error Message upon start-up

I have a fairly new Lenovo U310 that has been nothing but problems since I purchased it. Recently, it has been taking a long time to start up and when it finally hits the desktop, an error message pops up that says "Your system does not appear to have Intel Rapid Start Technology enabled." I hit 'OK' but there's not apparent way to fix this problem. I've tried downloading the IRST drivers from Intel, but trying to install them give me the error message saying that my system can't support the item. Help?

I'm afraid I don't know the layout of the BIOS options on Ideapads, only on Thinkpads - with the latter it is on something like the third screen of options and it is clearly labelled as Intel RapidStart.

Help Intel Rapid Start Problem U410

I've suddenly started having a problem with my U410 laptop. Everytime I put it on it shows a message that my system does not apear to have Intel Rapid Start Tecnology enabled. Ive checked the bios and it shows it being enabled but also that the IRST Partition status INVALID.
Can anyone pleas help me resolve this, I'm running Windows 8.1, the laptop is now out of warranty.

Hey everyone,
I registered just to at the very least post a possible solution to this problem. Was working on a U310 Touch unit tonight and came across the very same issue described in this post. Upon starting the unit in Windows 8, you get to the desktop and get a lovely message about Intel Rapid Start Technology not being enabled on the unit. Well, I went into the EFI BIOS and discovered that iRST was in an invalid state. Upon further investigation I noticed the 25GB partition (all within the same single hdd, as this unit did not have an ssd inside) was visible to the end user through Computer as a regular disk.
So the solution? Well, the partition somehow got unmarked as the hibernation partition! In my case, the fix was to use diskpart, select disk 0 (only hdd in machine), select the 25GB partition (was partition 7 I believe for my case) and ran this command (from the Rapid Start user guide and a microsoft forum post):
set id=D3BFE2DE-3DAF-11DF-BA40-E3A556D89593
This magical command sets the partition which we selected to be the hibernation partition. Once I rebooted, the error messages never came back, and I checked in the BIOS and now iRST says "Established", and everything is back to working order!
Hope this helps someone, took me a little while to figure this out.
** SMALL EDIT **
I used the default settings in the BIOS, set as AHCI in this case (no ssd, single hdd) when I checked after resetting to defaults.

Issues with Intel Rapid Start in Lenovo U310

Similar Messages

Maybe you are looking for