Issues with iOS 7 Text Input

Hi All!
I have come across a very interesting problem since upgrading my iPhone 5 and iPad Mini to iOS 7.
The problem, thankfully, is one that is easily replicated, and comes in two forms:
Scenario 1:
Open Messages
Create a Message
In the text input, type a word (any word will do)
Tap 'return' on the keyboard
attempt to bring up the 'Copy/Paste' context menu on the new line
This is where I run into the problem - I cannot under any circumstance invoke the 'Copy/Paste' menu
Scenario 2:
Similarly;
Open Messages
Create a Message
In the text input, type a word (any word will do)
Tap 'return' on the keyboard
type another word
Tap 'return' on the keyboard
type another word
You should have 3 lines of text - attempt to place the text cursor after the first or second word, as if you wanted to add another word to that line
You will find that the cursor will disappear, making it very hard to tell if you are on the end of the line you want to be on, or at the beginning of the following line.
Has anybody else come across this problem?
I was very excited to see iOS 7.0.2 hoping that the problem would be resolved, but it has not been addressed yet.
I find it quite annoying...

Hello there, HeavyJ251.
The following iPhone Troubleshooting assistant should help resolve performance issue you are describing as well as provide additional information:
Apple - Support - iPhone - iPhone Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/phone/
Keep in mind, that step "Close App" looks a little different now in iOS 7. For that, when closing apps, once you are in the multi-tasking display, swipe up on the window. I would also recommend closing all apps you see on this step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Similar Messages

  • When will these issues with iOS 8.0.2 be fixed?

    Admittedly, this problem has been going on since Apple released the core iOS 8 software, but it's glaring (worse) here. Let's go to the beginning.
    I own an iPhone 4S 8gb and upon release of the core iOS 8 software, I installed it like a fool and I didn't know that a lot of problems came with it, so the next morning, my iPhone's internet (connected to a WiFi network) was shotty as sin and I really needed it at the time because of a Transit thing I was doing until recently. The features that came with the iOS 8 is impressive, but I also was shocked when I couldn't even listen to my music for a whole day (I fixed that when I hooked up and synced in iTunes), despite my library having the same number of songs before the update on the iPhone. Now, I've heard of these problems from a friend who apparently works for the Apple tech department days after I discovered them myself, so I waited for the next update in hopes that it'd fix all of the core iOS 8's problems, but... short and to the point, this update is even worse than the core software. Problems include, but not limited to:
    Safari lags like crazy at times, especially when you're trying to type something. Also, Safari seems to not direct you to Google unless you searched for the topic again; I don't like doing that. I like typing in a research topic in Google's engine only once.
    Siri is much worse than the 7.1.2 software; the assistant can't tell what you're saying 69% of the time. I'm also not pleased with holding the home button to speak to the assistant and continue holding it until you finish speaking to her/him.
    Apps freeze and become unresponsive and in common cases, they crash in the middle of the night (a perfect example would be YouTube) while I'm sleeping (not 100% sure who's to blame for this, Apple or the app developers themselves).
    (refer to the lagging Safari bullet) The keyboard lags on you badly and I'm not just talking about Safari, this problem is every where you need the keyboard in, including basic texting in iMessage.
    The Music app apparently can't judge your selection at times, like, when you select a song from your library, it takes 3 hard pushes on the touchscreen to select it and sometimes, it randomly selects the next song under the one you want to listen to.
    Did I mention the constant lag?
    I'll probably find more problems as I scan though the iPhone tonight, but above are the main problems that I have with 8.0.2, not 8. I know what you're probably saying: "Why not just downgrade back to 7.1.2 where you didn't have barely any problems at all with your iPhone?" Well, apparently, Apple stopped signing the software when I tried to restore the iPhone in iTunes to that firmware, so I find it completely pointless to try to downgrade. My core question is "When will these issues with iOS 8.0.2 be fixed?" I know the iPhone 4S can work with the newest iOS, because, if it wasn't, iTunes wouldn't have notified me of the update. I was thinking of getting an iPhone 6 or 6 Plus June or July of next year, but if the software is still buggy at the time, I'll stick to my 4S until my contract ends at the end of 2015

    Also, I've noticed that the 4S' battery life is horrible even if there's just music going on in the background. Common battery life for the iPhone is 3 hours (just having music and data active) and most of the time, I'd have to carry my USB charging cable with wall socket so I don't have to worry about it shutting down on the go and I know it's the software that's the problem because it wasn't like this prior to iOS 8.0.2 or even the core iOS 8. Common battery life for the iPhone on iOS 7.1.2 was atleast 7-9 hours on the same conditions as listed above.

  • Is there an issue with iOS 8.2?

    It seems like there are a lot of people that are experiencing issues with iOS 8.2.  I guess it was just a coincidence that this happened to me when I unknowingly updated my iTouch out of the box.
    Missing songs and playlists after update
    Nothing has worked to fix this.  Is there an Certified Apple representative on this board that can address this with all of us?  If so, what is the timeframe for fixing these issues?

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Has anyone had app update issues with iOS 8.1?

    I'm running iOS 8.1 on a iPhone 6+.  If I try to update an app from the app store without being logged in, it will hang the process and the update will fail.
    Previously, with my iPhone 4 and iOS 7.1.2 the app store would ask me to log in when an app update was attempted without being logged in.
    The work around until apple fixes this bug is to ensure you are logged in BEFORE attempting an app update.  An honest techie at the local apple store admitted this is a bug (one of many) in iOS 8.1.  Has anyone else had this issue with iOS 8.1

    Nope, I'm able to update an app in iOS 8.1, even if I'm not first logged into the iTunes & App Store in Settings.  It prompts me to update the app, then I sign in with my password.
    Do you have Touch ID enabled for App Store or not?

  • Issue with displaying text in BEx

    Hi all,
    We are facing an issue with displaying text in the query output.
    We have a master data carrying charac ' 0MATERIAL'.When i do maintain master data ,I am able to see medium description in the output.
    Now when i drag 0MATERIAL in bex designer and in properties set display to key and text(medium text), it shows me only the key and it shows some wierd text which is in no way related to the medium description ( that was shown under maintain master data)
    can anyone pls tell me why i am not able to see the medium description when executing the query that too when the text is loaded.
    Pls help
    Regards,
    Suchitra

    But what i wouldlike to know is what about the master data which is present in 0MATERIAL now?
    Nothing will happen to your data.
    Its showing there ...dosent that mean its present and activated?
    They are present n in active version.
    If u change any records they will be in M version..by activating the data...u are converting it to A version.
    Regards,
    Ram.

  • Issues with IOS and WPA2 Enterprise

    Hi,
    Done a lot of searching on this, but can't find anything useful!
    I've got a network running WPA2 Enterprise using AES and PEAP/EAP-MSCHAP-V2
    For some reason, all our apple IOS devices connect to the network fine and are able to accept the server certificate, but can't seem to access anything over the network such as the internet once connected. I'm currently testing an iPad mini with IOS 7.0.4
    I have other devices such as laptops and a Windows Phone 8 devices, and everything works fine.
    Am I missing something here? What could be causing the IOS devices to stop accessing the network?
    Cheers,
    Carl.

    I just found this on the frontline support site, I believe my question has been answered:
    Important Notice
    iOS Devices
    Apple has made a change to the PushMagic or UnlockToken values in that they may differ in size to previous values. This can cause issues with iOS devices being able to connect to the Afaria server as the current database field size is not adequate to facilitate the variable length of this value.
    Apple has made a change to the PushMagic or UnlockToken values in that they may differ in size to previous values. This can cause issues with iOS devices being able to connect to the Afaria server as the current database field size is not adequate to facilitate the variable length of this value.
    There is an Apple issue that we have found in our testing that occurs when iOS devices are enrolled. This issue fails a check when the enrollment payload is inspected and the signing cannot be read. SAP believes Apple will fix this issue prior to iOS 7.1 being released but we are working on a patch that will address this issue shortly in case the fix does not make the iOS 7.1 GA release.
    Afaria will be providing a patch to address this issue that increases the size of the database column from 2K to 6K to accommodate this change.
    This issue is resolved in Service Pack 3 Hot Fix 39 and Service Pack 4 Hot Fix 3. Available now.

  • SSL VPN (WebVPN) issues with IOS 15.0(1)M1

    Hello everyone... I need your help!
    I am having some weird issues with webvpn/anyconnect, please find the relevant information below;
    Symptoms:
    - AnyConnect Client prompts users with the following error:
    "The secure gateway has rejected the agent's VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists."
    Debug:
    Mar  5 13:09:45:
    Mar  5 13:09:45: WV-TUNL: Tunnel CSTP Version recv  use 1
    Mar  5 13:09:45: WV-TUNL: Allocating tunl_info
    Mar  5 13:09:45: WV-TUNL: Allocating stc_config
    Mar  5 13:09:45: Inserting static route: 172.25.130.126 255.255.255.255 SSLVPN-VIF36 to routing table
    Mar  5 13:09:45: WV-TUNL: Use frame IP addr (172.25.130.126) netmask (255.255.255.255)
    Mar  5 13:09:45: WV-TUNL: Tunnel entry create failed:IP= 172.25.130.126 vrf=77 session=0x67234340
    Mar  5 13:09:45: HTTP/1.1 401 Unauthorized
    Mar  5 13:09:45:
    Mar  5 13:09:45:
    Mar  5 13:09:45:
    Mar  5 13:09:45: Deleting static route: 172.25.130.126 255.255.255.255 SSLVPN-VIF36 from routing table
    Mar  5 13:09:45: WV-TUNL: Failed to install (addr 172.25.130.126, table_id 77) to TCP
    Mar  5 13:09:45: WV-TUNL*: Received server IP packet 0x6692EB08:
    Mar  5 13:09:45: WV-TUNL: CSTP Message frame received from user usr-test (172.25.130.126)
    WV-TUNL:      Severity ERROR Type USER_LOGOUT
    WV-TUNL:      Text: HTTP response contained an HTTP error code.
    Mar  5 13:09:45: WV-TUNL: Call user logout function
    Mar  5 13:09:45: WV-TUNL: Clean-up tunnel session (usr-test)
    When the error occurs, the "SVCIP install TCP failed" counter increments:
    VPN-Router1#  show webvpn stats detail context CUSTOMER-VPN
    [snip]
    Tunnel Statistics:
        Active connections       : 1       
        Peak connections         : 3          Peak time                : 19:09:04
        Connect succeed          : 9          Connect failed           : 5       
        Reconnect succeed        : 0          Reconnect failed         : 0       
        SVCIP install IOS succeed: 14         SVCIP install IOS failed : 0       
        SVCIP clear IOS succeed  : 18         SVCIP clear IOS failed   : 0       
        SVCIP install TCP succeed: 9          SVCIP install TCP failed : 5       
        DPD timeout              : 0        
    [snip]
    IOS Version Details:
    Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)
    System image file is "disk2:c7200-advipservicesk9-mz.150-1.M1.bin"
    The router also runs IPSEC remote access VPN in addition to the webvpn/anyconnect scheme.
    Config:
    webvpn context CUSTOMER-VPN
    title "SSL VPN for Customer"
    ssl authenticate verify all
    login-message "Enter username and passcode"
    policy group CUSTOMER-VPN
       functions svc-required
       svc keep-client-installed
       svc split include 10.1.16.0 255.255.240.0
       svc split include 10.1.2.0 255.255.254.0
    vrf-name CUSTOMER-VPN
    default-group-policy CUSTOMER-VPN
    aaa authentication list AAA-LIST
    aaa authentication auto
    aaa accounting list AAA-LIST
    gateway vpn virtual-host customer.xx.com
    logging enable
    inservice
    The error happens sporadically, at least once a week, and on different contexts. Does anyone have any clue on what can cause this issue? Any help is appreciated!

    Have you seen my post https://supportforums.cisco.com/message/2016069#2016069 ?
    At that point in time we were running with local pool definition.
    As the http 401 rc happens very sporadically we still gathering incident reports internally.
    Will open a case if you did not yet.
    cheers, Andy

  • Any issues with iOS 5.0.1 on iPad 2?

    Any known issues, thinking about upgrading?

    I am one of those whose mileage has varied.
    Lots of little annoying things - experiencing on even as I'm typing on the iPad. It is slower, I have keyboard delays - sometimes incredibly long delays, Safari crashes regularly, I can't get the Emoji keyboard to work anymore. It did work in iOS 4.3.5 as a third party app but does not work at all as a preinstalled keyboard, switching from app to app is much longer now than in iOS 4. Spell check no longer works in Safari - other apps yes - but not in Safari. Little issues with contacts app - can no longer custom title email addresses on new contacts.
    One of the absolutely most annoying things is that when I try to delete only one character as I am typing text, the delay is so long that I end up deleting two or three characters - even if I only hit the delete key one time.
    No issues that make the iPad unusable, certainly, but too many annoying little quirks that were not there in my perfectly operating iPad prior to the update.
    I am hoping for another update soon.

  • Issues with ios 8.3 update on iPhone 5

    After updating my iPhone 5 to ios 8.3, I am unable to stream purchased music and videos from iTunes or any podcasts. I also can not stream videos on YouTube, Netflix, or Safari. Nothing works on both Wi-Fi and my normal data. If I could I would try to turn off the phone and restart but unfortunately my iPhone 5 is one of the ones that has the faulty lock button that needs to be repaired. But besides that, has anybody else been having issues with streaming music and videos?

    i'm looking for people with problems on iphone 5 with 8.3 because i'm still on ios7 and considering to upgrade
    but if you have problem with turning off the phone,
    you can set up "assistive touch" from setting > general > accessibility > assistive touch (down the bottom)
    you can also set this on the accessibility shortcut for the triple click on the home button to show/hide the assitive touch
    you'll see a black circle floating on the screen somewhere. you can move this thing around if it blocks what you want to see/tap
    now to turn off your phone you can tap the assistive touch button > device > tap and hold the 'lock screen' icon until the power off slider comes up.
    so you don't really have to fix the lock button

  • Why are there no answers to the wifi issues with iOS 7.0.4

    Why isn't Apple addressing the issues with wifi connectivity, or lack there of, with iOS 7.0.4? Everyone is complaining, but no one is answering. Don't tell me about turning on and off of wifi and router...been there. Come on apple...give us some help here. And why will my iPad 2 connect to Apple but absolutely no where else?

    Why isn't Apple addressing the issues with wifi connectivity, or lack there of, with iOS 7.0.4? Everyone is complaining, but no one is answering. Don't tell me about turning on and off of wifi and router...been there. Come on apple...give us some help here. And why will my iPad 2 connect to Apple but absolutely no where else?

  • Issue with RFBIBL00 batch input processing

    Hello ABAP Experts,
    I am having issue with a speed of batch input session processing.  If you can please help me resolve the issue.
    I have a requirement to post liquidation document to clear open vendor down payment items and then to clear vendor invoice with liquidation.  I have created a custom program to address this requirement where it uses the SAP program and Call Transaction.
    For liquidation document posting, I am using the program RFBIBL00.  The custom program has steps:
    1.  Submit RFBIBL00 via job to create batch input session
    2.  Close job
    3.  Submit RSBDCSUB via job to process batch input session
    4.  Close job
    5.  Wait for 15 seconds
    6.  Read job log to get liquidation document number
    7.  If no document posted then display error
    The issue is when the job log is read it says u2018Session 10zrsbdcsubxxxxxxx is being processed by user   in mode   on serveru2019 and there is no error message or no document number with message number 312.  So the program displays error message, stops and cannot perform the second step. If I check in the system after a couple of minutes I find the document posted. I also increased the wait time.  But the first record processing always takes longer and the program finds as a failure.  The program can process next several records with success.
    I am looking for expert help if you please suggest how to resolve this.
    Thanks & Regards.
    Yashasvi

    Hi,
    Have you tried calling FM DEQUEUE_ALL before/after schedulling job?
    Gouri.

  • Issue with document text - converting from PDF to Word

    I have used Adobe Reader in the past with no issues.  Today, I tried to convert a PDF to a word document.  It worked, but the text all changed to wingdings font (even though it says it is Calibri).  Any suggestions?

    Hi marleighp23001196,
    Are you facing this issue with a specific file or with other word files too?
    Regards,
    Rahul

  • Issue with Full Screen & Input languages (Mavericks 10.9.1)

    I have two issues with the latest (Version 8.0.24308) Microsoft Remote Desktop from the Mac App store:
    1. If I tick the connection entry "Start session in fullscreen" option, after connect the desktop slips upwards like on the screenshot (below on the link)
    2. The default input method switches to Latvian after connect (never used Latvian anywhere...).
    On my Mac:
    - System language: Hungarian
    - Input language: Hungarian
    On the server:
    - System language: English
    - Input language: Hungarian (default) + English
    +: the app doesn't supports Retina display resolution :(
    Screen Shot link:
    db.tt/yYKN0arM

    Hi,
    1. The version 8.0.24308 offers updated functionality for full screen mode to users of OS X 10.7+:
    OS X native: The native full screen feature for the Mac OS X version.
    Custom: The custom full screen mode enables the multi-monitor feature in order to provide a better experience for users of Mac OS X versions 10.7 and 10.8.
    Important information for users of 10.9: if you have disabled "Displays have separate Spaces" in Mavericks
    (System Preferences > Mission Control) go to Preferences > Resolution in the Microsoft Remote Desktop client and configure the setting using the same option.
    Please try the OS X native mode and see how it works.
    2. The OS keyboard locale, is suggested to the remote PC. Therefore, please check the keyboard locale.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Issues with dynamic text box formatting

    I'm running into issues with using HTML formatting for a dymanic text field. I know these are quirky and I cannot figure out how to get the formatting proper.
    I have on my stage a dynamic text box called "content_txt" inside of a movie clip instance "content_mc". When it enters the frame, I fade the "content_mc" from alpha 0 to 100 using a timeline animation. In order for this to work, I have to embed the font in my "content_txt" text field. However, the only way I get get the HTML formatting to work is if I do not embed the font.
    The dymanic text field is set to render as HTML. In my actions layer, I set the text:
    this.content_mc.content_txt.htmlText = "<b>Hello world,</b> it is me again."
    In summary:
    1. If I do not embed the font, the alpha fade does not work but the HTML formatting does.
    2. If I embed the font, the alpha fade works but the HTML formatting does not.
    How do I resolve this? It's driving me nuts!

    How do you embed just one style?
    I've tried typing three words in the text field and formatting each (regular, bold, italic) but the text field just defaults to whichever format is first.
    Also, I tried embeding the whole character list and did not have success.

  • Battery issue with iOS 8.2

    i have ipad 4 with retina display. Since my upgrade to newer version today to IOS 8.2 .
    I Have notice this more than anything my BATTERY IS DRAINING TOO MUCH FASTER NOW, n heating up faster too.
    before that I did had issue with battery since upgrade to IOS 8, but now typing this msg 1% is gone. Same for when playing games, watching movies n other work. The drawing time have increased a lot. And I am using my iPad without my cooler master cover too.
    please have this fix ASAP. And where is the health app ?

    Same here, i have a similar issue..
    My iPhone 32Gb 5s (ios 8.1.3) facing this issue too, the battery precentage jumps when using at 61%-59%, 55%-53%, 31%-29%.
    I also facing this issue too when it was 8.1.2..
    When the precentage shows 59% on the iPhone, i charges it to the iTunes on my MBP, then precentage on the itunes for a while shows yea, it is true 59%.,
    I'm waiting for about 3min, the battery precentage on iPhone shows it STILL at 59%, BUT the precentage showed on iTunes is 60% !! And the next 3 minute, the battery precentage on iTunes shows the battery up into 61%, AND when i look the battery precentage on the iPhone, it was JUMPS from 59% directly to 61% !! (that's not showing 60% on iphone)
    I assuming it just an iOS wrong battery precentage. (the battery actually isn't broke)
    Because when the iPhone unplugged and the battery precentage on the iPhone shows 61% for a while, ACTUALLY at the moment, the battery precentage is JUST PASS THROUGH 60% first, before it turn to 59%. And yea, there's the main trouble, the 60% battery precentage isn't show on the iPhone.
    I already do a hard restart the iPhone, calibrate the battery, and even restore the iPhone but it doesn't work.
    i Hope in the next 8.2, this issues can be solved.

Maybe you are looking for