Issues with iPod Touch and latest update (4.3.3)?

I recently updated my iPod Touch 3G to 4.3.3.  Before updating, I had absolutely no issues.  Since updating, the iPod will shut off at will, sometimes flickering, sometimes going straight to the "slide to shut down" screen.  Sometimes it will shut down in the middle of an app, I'll start it back up, and it will shut down again immediately.  Occasionally, when I start it up after crashing, it will make the camera shutter sound!  And there's no camera on this iPod!
Possible extenuating circumstance: I upgraded from a Power PC iMac to an Intel iMac at the same time I updated the software on the iPod.  I have read the suggestions and the troubleshooting guide, and nothing has helped so far.  I wiped the iPod clean and reinstalled and all that did was wipe out my settings (of course).  Resyncing the iPod worked (apps and music loaded fine), but still it shuts down without warning.  I tried installing a new free app, but that didn't work.
Usually I'm pretty good at figuring out these sorts of issues, but I'm at my wits end.  Is anyone else having these problems?  Am I screwed?

Okay, so now I have read that you have to install a free app through the phone, not through the computer.  I've done so and it looks like everything is good for now.  Keeping my fingers crossed.  My question now, is that if this is a common occurance with the 4.3.3 update, why did Apple imply that I needed to wipe my iPod clean when this was the much easier and less invasive answer?

Similar Messages

  • WRT400N connection issues with iPod Touch and MacBook

    I'm a newbie, so please bear with me.
    I recently upgraded to the WRT400N from a Linksys BEFW11S4. 
    Since the change, the connection to iPod Touches and MacBooks at the house have been shaky at best.  The connection frequently drops out completely on the iPod Touch even if it's right next to the router.
    I've tried resetting the router, changing settings on the iTouch and MacBooks, but the problem persists. I don't want to mess with the router settings as I'm not experienced in that area.
    Can anyone please help me?
    Thank you.

    You can try the below mentioned settings.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    On the set-up tab change the MTU Size to 1365 and click Save Settings...
    Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...
    This should fix the issue for you.

  • Issues with flickering iPod Touch and latest update (5.0)?

    I recently updated my iPod Touch 3G to 5.0.  Since updating, the iPod will shut off at will, sometimes flickering, sometimes going straight to the "slide to shut down" screen.  Sometimes it will shut down in the middle of an app, I'll start it back up, and it will shut down again immediately.  Occasionally, when I start it up after crashing, it will make the camera shutter sound!  And there's no camera on this iPod!
    This also happened when I upgraded to 4.3.3. but eventually (over several weeks) stopped happening at all.  I wiped the iPod clean and reinstalled and all that did was wipe out my settings (of course).  Resyncing the iPod worked (apps and music loaded fine), but still it shuts down without warning.  I tried installing a new free app, which I read would help, but that didn't work.
    Usually I'm pretty good at figuring out these sorts of issues, but I'm at my wits end.  My iPod is a little over 18 months old. Is anyone else having these problems?  Am I screwed?

    Okay, so now I have read that you have to install a free app through the phone, not through the computer.  I've done so and it looks like everything is good for now.  Keeping my fingers crossed.  My question now, is that if this is a common occurance with the 4.3.3 update, why did Apple imply that I needed to wipe my iPod clean when this was the much easier and less invasive answer?

  • I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

  • I have just tried to update my ipod touch and the update failed but it has locked my ipod.  All I get is a picture of the itunes logo and the usb lead

    I have just tried to update my ipod touch and the update failed but it has locked my ipod.  All I get is a picture of the itunes logo and the usb lead.  I am unable to get the ipod to move and I don't know what to do.  I think I should be recompenced by Apple if I have to pay to get it fixed!

    The logo is saying connect it to your computer with iTunes installed on the computer.  I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
    - Resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Place the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Place the iPod in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If the iPod appears in iTunes restore the iPOd.  If not I would make an appointment at the Genius Bar of an Apple store.

  • Outlook 2010 Syncing With iPod Touch and iPad

    I have a PC with Outlook 2003 that sync’s with iPod Touch and iPad. I plan to buy a new PC with Windows 7 and Outlook 2010. Comcast tells me they don’t support Outlook (They support Outlook Express) but Outlook 2003 currently works fine on my PC with Windows XP. I have the following questions:
    - . Is there an alternative to Outlook 2010 that will sync with my iPod Touch and iPad?
    - Will Outlook Express sync with my iPod Touch and iPad and is Outlook Express still available?
    - What is Microsoft Exchange?
    Thanks for your help. LCP

    Just look at page 26 of the new US) users guide. It specifically says that the iPad syncs with Outlook 2010 (as well as 2003 and 2007). However, Comcast's mail help page only lists OL 2000, 2002, 2003 and 2007.
    http://customer.comcast.com/Pages/FAQListViewer.aspx?topic=Internet&folder=b2aa4 a3a-53eb-4730-832f-89764b6a03b9

  • HT1926 I have an ipod touch and recently updated my itunes and now my ipod keeps saying it is in recovery and needs to be restored.  I keep attempting to do it (as it takes about 45 min.) and afterwards I get the same message.  The screen tells me to plug

    I have an ipod touch and recently performed the latest updates of itunes.  It said there were problems with my ipod and it need to be restored.  I did that and now it says it's in recovery mode and that I need to restore it.  It takes 45 minutes and I've tried it several times and keep getting same message.  My ipod is now unusable and it has a photo of a plug with an itunes icon telling me to plug it in.  It is plugged in???  I restarted the computer, tried another computer, reset my ipod and nothing.  Help!

    If not successful try:
    - Placing the iPod in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try installing using the manual install method described here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • Problem with iPod Touch and Nissan Car Interface

    I have an '09 Nissan Murano with the built in iPod interface. Previous to upgrading to the 3.0 update, the iPod touch and car got along great and everything worked well with the car being able to control the ipod and play music with only the dock connection (not needing to use the headphone jack). However, since the 3.0 update, the car will no longer see the iPod. The iPod shows the Connected to Accessory screen (as it did in the past) however every few seconds, the iPod will flash a quick screen of the iPods normal music screen, then go back to the Connected to Accessory screen. The car just says iPod Not Connected.
    Like I said, it worked perfect before I upgraded to 3.0, and to further that, my brother has his touch still on 2.0 software, and it works fine, leading me to be sure that its a problem with the 3.0 update and not the car. I've seen posts like this with other vehicles, but no one seems to have an answer. Wondering who else is having problems like this and if there is ANY solution (besides rolling back my software).
    The fact that an update disables iPod branded interfaces seems ridiculous to me. Thanks for any help!

    I recently purchased an infiniti FX35 with the ipod integration. After visiting the local apple store "Genius Bar" and speaking on the phone with an "apple expert"; neither the genius bar or the apple expert heard of such an integration option in new cars being sold. They wanted more information from me about how it work rather than them assisting me with my problem.
    Anyway, after alot of experimenting I got my ipod touch 2G running firmware 3.1 to work somewhat consistently.
    Turn off wi-fi on the touch, power off then back on, go the ipod menu and select playlist. Attach the touch to the infiniti supplied cable through the dock connector. Select the ipod option from dash board. Playlist, songs, artists, etc will appear on the dash display and begin playing.

  • WRT54GC Wireless router problem with iPod touch and Ipad

    Hi
    I have a WRT54GC wireless router and both my ipod touch and ipad can connect to the network. They can both use the internet for like one minute and then the internet becomes very slow, and dies. Network connections are lost and I'm getting messages like 'can't connect to itunes' or 'lost connection with youtube'. The wireless router works fine for the laptops in the house (all windows). In the house where I live in the week (closer to my school) there is another router and i don't have the problem over there, also no problem to connect to my schools wireless network... So I think it's a combination problem of apple products and that router. I've tried a lot, like resetting network configuration, updating firmware, changing from wpa to wep1,... Anyone an idea?
    Thank you
    Bert

    oh and the connection to the router isn't lost.
    Thank you

  • Why does my Windows Vista computer say the wrong iPod Touch name? I have multiple iPod Touches and after updating one of them, Windows Explorer says they are all the same name now.

    Sorry for the exceedingly long title...
    I have multiple iPod touches, and I just updated one of them to the newest iOS (5.0.1). Now whenever I plug in any of the others, the name of the one I updated appears in Windows explorer. How can I make Windows able to determine which iPod is which again?
    64 bit vista home premium.

    iPod Classic are high drain USB devices, I hope you are not trying to connnect them simultaneously to iTunes, which will definitely hang your USB Host controller, thereby freeze iTunes.
    But here is an Apple Support Article on using multiple iPods for iTunes.
    http://support.apple.com/kb/HT1495?viewlocale=en_US
    Have nice day!

  • Problem with Ipod Touch and new software (2.2.1)

    After upgrading to the 2.2.1 I have been unable to listen to it using my car stereo. It will only recognize my ipod sometimes and when it does a majority of the time there will be no sound at all. On my car stereo it shows my playlists and everything but no sound. I never once had a problem with my ipod or stereo until I did this upgrade. I tried switching out the usb cord but that did not help. I then restored my Ipod. I also tried to wipe out the battery completely and then charge (heard on a different message board that that could possibly help). Still having the problem though. I have an Ipod touch and a Pioneer stereo with the USB cable hook up.

    yeah i'm having the same problem i have a pioneer navigation system and it will not play my ipod touch after upgrading to 2.2 i called apple to try to find a way to downgrade and they never gave me an answer

  • I am using new laptop with ipod touch and have downloaded i.tunes.  in the past i.tunes showed all the tracks on my old i.pod.  I can't seem to find the i.touch library to change or delete music. What am I not doing?

    I am using a new laptop, windows 7, with ipod touch, hoping to listen to, whilst on line, edit and add music to my ipod library.  I have downloaded i.tunes but it does not show my library.  I know I have repeats to delete too but cant see anything, It does recognise that there is a body of music with the indication bar at the bottom., but does not list anything.  Help

    I attempted to back up my old iPod, but in File - Library - back up to disk, it's asking for 15 disks!  I can't just back up to the PC/ext HDD that I can see.
    That backing up your iTunes library, not your iPod. You can backup up your library by:
    iTunes: Back up your iTunes library by copying to an external hard drive
    First you have to get Itunes to see the iPod. See the following. Notupdating your iPod iOS has nothing to do with it.
    iOS: Device not recognized in iTunes for Windows
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    You can transfer iTune spurchases from the iPod to the computer by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    You can also redownload iTunes purchases by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer.
    For other music yo will need a thrid-party progtam like one of those discussed here:
    newer copy

  • Issues With Ipod Touch Memory

    Whenever I try to download more applications on my ipod I get the error that says the disk memory is low and that I should delete stuff before adding new applications. So I deleted a few apps, all my video and photos so I only have a few applications on my iPod touch and I still get the same error. I know there should be lots of memory left on my ipod, being that my friend and I have the same songs on our ipod touches and he has many more apps than I have, including the ones that I have on my iPod. I am running OS 4.0. Thank you.

    If the low-memory problem is with the memory (RAM) vice the flash storage, resetting or powering off and then back on will solve that problem. However, if the problem is with the flash storage then syncing may reclaim that memory but a reset may be required if the iPod behaves like an iPad. Users have reported that deleting items from the iPad does not always reclaim flash storage and that sometimes restoring is required.

  • Having issues with IPod Touch connecting

    I have the IPod touch and I just got the WRT110 wireless router, but everytime I try to connect the touch it says unable to join network. Does anyone know how to fix?

    How do I find what my WEP is, and where do I put that into the Ipod Touch - when it asks for the password?

  • Several issues with iPod touch. please help!

    Ok. So i have several issues going on with my iPod touch. i got it for Christmas in 2010, i have recently updated it. after the update these issues have happened.
    1. Screen won't rotate. Photos won't rotate. The screen won't rotate for horizontal keyboard use. Even for some apps that you have to rotate the screen, it just wont rotate. i have tried everything! i have read other discussions about this issue and they said there is a lock with an arrow around it in the top right corner, in my ipod there is not.
    2. After i updated my iPod i noticed about 20 of my songs went missing! they are no where to be found on my iPod AND my iTunes! I purchased all of those 20 songs and am kind of mad they randomly disappeared. i have looked in every place a song could be and they are not there.
    3. I have recently downloaded some apps and wheni went to try them, they would almost load and then crash and go back to the home screen. a bunch of my apps do that now. i have tried restarting my iPod and i have tried to open the apps like a million times and everytime they crash and goes to the home screen of my iPod. they are all free apps. some of the apps are: Impossible Test: summer, angry birds, angry birds: rio, angry birds: seasons. some of them i have been able to play a couple times, then they randomly stared crashing.
    someone please help me with these problems! thank you!

    For #1:
    - Have you restored the iPod from backup?
    - Have your restored the iPod to factoery defaults/new iPod?
    If restoring from backup does not solve a problem then your likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    For #2:
    If you are in the USA and using the latest iTunes then you can redownload music via the iCloud beta.  See:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise you can contact iTunes and they MAY allow a redownload.  See:
    Apple - Support - iTunes
    For #3:
    Try:
    iOS: Troubleshooting applications purchased from the App Store

Maybe you are looking for

  • How do I get my Hp scanner to work with Mavericks?

    I am running 10.9.4 and my wife uninstalled the software to our HP Scanjet 4370. I'm not sure what to do to get the scanner to operate because HP does not have a driver or software for Mavericks yet. Can anyone help?

  • Creation of index putting to_char in

    Hi Trying to create inxde on concatentated columns and it is putting to_char on by default trying to make index numeric column but even to_number in front not putting to_number on Using 11.2.03 Tried create index MEDIA_PLIS_HANDLED_IDX on MEDIA TO_NU

  • Printing text in text area in so10(standard text)

    Dear all, I need to print a text in text area.i mean i need a box in which i can fill text in standard text (tcode-so10).Using box command we will be doing in script. But is there any possibility that i can solve the issue in so10 itself as i am gene

  • TS1702 Some of my purchased apps are not showing in iTunes...

    I'm using the latest version of iTunes for Win8. 1 day after restoring a backup on my iPhone 5, some of the apps that was previously loaded in from the restoration disappeared somehow. Later on when I tried to download the apps from iTunes, they did

  • Real time replication

    I think my initial load finished and I have couple questions. 1. Checked data from both source and replicat, they are the same amount of data, is there a way to check from ggsci to ensure at the data is in-sync? 2. I checked the extract status and it