Issues with ITunes on Lion Mac OS X 10.7

I succesfully upgraded to Lion and everything seemed to be fine until I started trying each of the programs. I had previously upgraded to Ilife  '11 (unless I did something wrong) but I can't get  IPhoto to open, though my photos can be seen if I set up the screensaver to Iphoto. Garageband and Imovie work properly.
My second issue is that when connecting my Iphone, it doesn't show on the Itunes Devices section. I updated Itunes already but the problem is istill there.
Anyone can help?
d.

This sounds like a compatibility issue with the software you are using. I recommend you contact the software vendor for a Lion-compatible update.

Similar Messages

  • Issues with iTunes Media Folder resetting to default location

    This is my 1st post to the Apple Support Community (the problem I have is with iTunes, but I believe it also has to do with the way OS X Lion is setup and the way Networked Drives are mounted in it) ...so I hope I've posted this to the correct place. Thank you in advance for any help I'm going to get here. I have no expirience with Mac OS X's (coming from a Windows background) so please bear with me, but I am a S/W Tester by trade so I'd like to think I'm resonably IT literate.
    ISSUE:
    I have a problem with iTunes and my Media Folder resetting constantly - my Setup is a MacBook Air, with an Apple Time Capsule 2TB which is providing my Wifi Network.
    I want to setup iTunes so that it will permenatly point to my Data Folder on the Apple Time Capsule, so that when I download purchases, synch iPhones, or rip Music it will end up on the Apple Time Capsule and not on the MacBook Air's SDD Drive
    I though I had managed to do this, but after I shut down the MacBook Air, and then logged back in to rip some music, iTunes had repointed to the MacBook Air's SDD, and all the CD's i ripped were saved there instead of the Apple Time Capsule. So far I have done the following;
    STEPS CARRIED OUT SO FAR:
    1) Connected the MacBook Air to the Wifi Network provided by the Apple Time Capsule - I can see the Time Capsule in the Finder app.
    2) Gone to GO MENU > LOCATE SERVERS and selected the top level DATA FOLDER on the Apple Time Capsule....I believe that I've managed to create an ALIAS (Shortcut?) that points to this, and it's on my Desktop.
    3) Next I went to SETTINGS > USERS > and made sure that ALIAS (Shorcut?) to the DATA FOLDER on the Apple Time Capsule is always loaded up on startup for my UserID
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    5) I then went to ITUNES PREFERENCES and changed the MEDIA FOLDER it pointed to, from the MacBook Air's SDD to the one on the Apple Time Capsule.
    6) Then I logged out and shut down the MacBook Air.
    7) I powered on the Macbook Air, and logged in, then ripped some music - I then found that iTunes had created a new iTunes Folder for my User on the MacBooks SDD and all the CD's I ripped had been saved there. Also under the ITUNES PREFERENCES menu, it looks like iTunes had reset the location of the MEDIA FOLDER...
    I don't know if this is an issue with iTunes or not - I'm assuming it's a setup issue on my part, and that maybe I haven't created a permenant link to the Apple Time Capsule as I thought I had. If it helps I was attempting to do something similar to whats described in this YouTube video; http://www.youtube.com/watch?v=mA399lEXRTE
    Thanks again for any help
    Regards
    Codename21

    Codename21 wrote:
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    if you really moved your entire iTunes folder, the next step needs to be launching iTunes while holding the option (⌥) key, clicking on choose library at the prompt, and selecting the iTunes folder you moved to the TC.
    as for auto-mounting the TC's disk on startup, you might find this discussion interesting.

  • IPod classic issues with iTunes 9 just may be disk problems in ipod

    I have done extensive testing for several days now on this iTunes 9 issue with iPod Classics. I used 3 different computers, 1 Macbook Pro, Windows 7 and XP with iTunes 8. I had 2 - ipod classic 80GB and 2 - ipod 5th Generation 30GB units people gave me to look at.
    It would take too much typing to describe all the restores, syncs, formats, copies I did over the past few days.
    Bottom line: Using PC utilities I began to believe the iPod hard drives had bad sectors. I trusted the disk testing because I got different results from different ipods. The problems I experienced and what I have read here are consistent with what you would expect from disk problems and S.M.A.R.T. technology on the drives.
    If bad sectors on a drive are dealt with by S.M.A.R.T. I would expect delays in accessing those sectors to occur.. resulting in delays to restore, delays to sync, delays to even skip songs on the ipod itself.
    What may be the case is switching to iTunes 9, discovers when it trys to use the bad sectors. Maybe iTunes 9 is more timing temperamental. I have iPods that pass all disk tests that work fine with iTunes 9 on mac and PC. The other 2 ipods reporting bad sectors on a disk test, can restore, but syncing 3000+ songs is nearly impossible. Sync delays were consistent with where I would expect bad sectors to exist in the process. Delays I noticed just copying a folder to the ipod in disk mode were consistent with the delays that occur syncing in iTunes.

    It is a possibility...
    I will state though that in my opinion the main problem is that itunes 9 is far less fault tolerant than prior versions and is far more likely to preemptively send an ipod into recovery mode when running into a problem when a ipod is plugged in.
    I'd had a couple of incidents in prior versions of itunes when it flashed an alert message that it was having trouble accessing the ipod. Usually unplugging and reconnecting the ipod resolved the issue. Unfortunately this system of handling the issue does not work at all with itunes 9. What happens is that the next time you plug in the ipod it is preemptively sent into recovery mode.
    I've had my ipod sent into recovery mode 7-8 times since I Installed Itunes 9. The last 5 of those in the last week. I've already done the reinstall itunes 9 from scratch and I still had to do a recovery of the ipod last night. Today I bought a new interface cable on the theory that my old cable might be defective. I've been able to plug it in tonight without itunes complaining about being unable to access the ipod

  • Having issues with iTunes 11.1.5 on Windows 8.1

    Ever since I've refreshed my windows computer two weeks ago. I am having issues with iTunes 11.1.5. For some reason I can access the iTunes Store, but most of the time when I do something internet related on iTunes, the app is either stuck on checking for downloads or when trying to sign in. I am trying to update all my apps but only a couple out of 30 actually start downloading but they keep getting stuck at "processing file". I have used another computer with Windows 8.1 with the same version of iTunes and its downloading app updates fine.

    it works at first then after trying to update a few apps (the third one this time) iTunes again stops working and gives me the 8008 error.
    Okay ... let's try seeing if that one is the root cause of the errors.
    Try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting
    Does that calm down the 8008s?

  • Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
    Has it returned to normal for you?

  • IPhone 4S with IOS 8 will not sync with iTunes on a Mac.

    I can not sync my iPhone 4S with iTunes on my Mac.  Had to delete the music I had to make room for the upgrade to IOS 8 and now I can't put any playlists back on my phone.  What gives?

    Hi zara,
    the thing is we have no option in iTunes to allow it, no check box. Perhaps this is because we're not meeting the system requirements as listed by Apple in this KB article.
    Wi-Fi Syncing requires:
    An iOS device running iOS 5 or later, and a computer running iTunes 10.5 or later on:
    OS X Lion or Snow Leopard (version 10.6.8)
    or
    Windows XP, Windows Vista, or Windows 7
    So it CAN be done with Snow Leopard apparently, but not Leopard (as carmstr27 indicates he/she's using). I'll give it a try once 10.6.8 v1.1 downloads and installs.
    hth

  • Issues with itunes on start-up

    I'm not able to use any of the functions of iTunes anymore.  Since the last couple updates.  When I start iTunes it takes a long time for the library to load(understandable-I have a large music library stored on an external hard drive) Once the library has finally loaded and iTunes opens, I just get the colored pinwheel of death. Any ideas?

    Hey david472,
    Thanks for the question. I understand you are experiencing issues with iTunes for Mac. To isolate and troubleshoot this issue, try opening iTunes in safe mode:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    There are several ways in which an add-on can cause iTunes to act erratically, such as those listed below:
    - Loss of iTunes functionality, such as the Visualizer.
    - Distortion or irregularity in the iTunes interface.
    - Slow performance.
    - iTunes won't open or quits unexpectedly.
    - You see an alert while syncing stating "... cannot be synced. A duplicate file name was specified."
    If you notice any of the above symptoms or other unusual behavior, you can disable any plug-ins not manufactured by Apple by opening iTunes in Safe Mode. This is done by holding down the Option and Command keys (on Mac OS X) or holding down the Shift and Control keys (on Windows) while opening iTunes. If performed correctly, you should see the following dialog before iTunes finishes starting up:
    Thanks,
    Matt M.

  • Cannot successfully sync iphone 4s with iTunes on an mac

    I just bought the iPhone4s and cannot successfully sync with iTunes on an mac. Each time i attempt to sync, i'm repeatedly told to authorise my mac, (which i've done) and the 'sign in' dialong box keeps showing a wrong apple ID for me. I've no difficulty with logging in with my apple id on either my iphone or mac. Any help appreciated.
    Many tks in advance

    To be able to sync the music from your iPhone or download any purchased music you purchased on your iPhone via your Mac?
    No.
    All music is purchased through iTunes. You could try the version of iTunes you have now on your Mac to see if any of your newly purchased music and iOS Apps can be downloaded to you Mac, but you will NOT be able to sync your iPhone at all to get any data or info off of if into iTunes
    One way to get pictures off of your iPhone is to email them to yourself and/or try to find a cloud service, like DropBox, that will still be compatible with your version of OS X and a version that is on the App Store for iOS and use this from your iPhone to get info to your Mac.The Mac version has to work with OS X 10.5 Leopard to be able to work back and forth between your iPhone and Mac.
    You will have Google for this as I have no idea if there are any cloud services available that will work with a Mac running OS X 10.5.8 Leopard.
    This OS X version is very old and many developers have abandoned support for this OS X version.
    No newer versions of OS X will not work or be downloadable as these only work with newer Intel CPU Macs and all version of OS X from OS X 10.7 Lion and forward are download only, now, from the Mac Apps Store which is only available from Mac OS X 10.6.7 Snow Leopard onward and  OS X 10.6 Snow Leopard is for newer Intel Macs and WILL NOT work on older PowerPC Macs like yours.
    Other than the alternatives I gave you, a new or newer (used) Intel Mac are your only options.
    Your Mac is just too old ( almost 10 years old).
    Sorry,
    Good Luck!

  • Potential Solution: Home Sharing issues with iTunes 10.6

    TL;DR: On a hunch, I changed the power settings of the ATV to never sleep. Since then, I have not had any issues. Granted, it's only been a couple of days, but it seems to have done the trick.
    Folks,
    Wanted to share my experience with Home Sharing issues after upgrading to iTunes 10.6. These forums a rampant with reports of the issue, so I'll defer to the search field above if you don't know what I am talking about. In short: iTunes 10.6 seems to have busted Home Sharing.
    For those who do, here's what I found:
    For some reason, is saw a very large number of established sessions from my Apple TV (ATV) into port 3689 on my Mac. This is the port that ATV uses to query iTunes to see what's available via Home Sharing (e.g.: what movies, songs, pictures, etc are available for display on the ATV).
    A sniffer cap and some observation of the power indicator on the ATV indicated that while it was sleeping, the ATV was querying iTunes. It would power on for a sec (wake on LAN, maybe?), issue some queries, then sleep.
    When this happened, the TCP sessions created were never town down. As such, I would eventually see 200+ established sessions on port 3689. I don't know exactly how many it took to make this happen, but when I saw this, iTunes stopped accepting new connections.
    Of course, bouncing iTunes would remedy the issue for a while, but it would return.
    On a hunch, I changed the power settings of the ATV to never sleep. Since then, I have not had any issues. Granted, it's only been a couple of days, but it seems to have done the trick.
    I would be interested to hear if it works for others.
    Happy viewing,
    Chris

    Thanks for posting this.
    I've been searching for an option of how to approach this problem.
    I picked up the new AppleTV when it was released, but it has made iTunes fairly useless from a Home Sharing standpoint.
    I also observed the massive number of TCP connections being opened against iTunes, but never closed.
    As expected, I could manually kill a few of these connections, and then could connect again, even without closing iTunes.
    I performed most of my testing with Windows 7, but while troubleshooting I had the same issue with iTunes on an old Mac Mini I had sitting around.
    I will try your solution, which makes a lot of sense, but it would be nice if Apple fixed the real problem.
    Thanks again.

  • Issues with iTunes Match on iPhone

    I am having some frustrating issues with iTunes Match and my iPhone 4 iOS 5.
    1) When using cellular data (3G), the songs simply do not play from the music app. It works fine when connected to wifi.
    Under settings, cellular data has been enabled for use in the music app.
    2) iTunes match constantly switches off spontaneously on iPhone. I need to go back to the settings to enable it every single time I use the app.
    I feel that iTunes Match was a total waste of money, considering the only reason I invested in it was to have my library accessible from my iPhone.
    Any help would be much appreciated!

    iTunes match doesn't work like that and if you don't like it then your best option is to turn it off and go back to syncing. However if you make sure that your device has a good Wi-Fi connection, re-downloading all your content shouldn't really be a big issue.

  • Issues with itunes 10.5 on Windows 7 (32 Bit) When Trying to sync iphone 4S or older

    I see a lot of people out there, specifically windows OS owners (xp all the way to 7), having issues with iTunes 10.5.  Here are the following issues I've encountered (some may only have one problem, others my have a combo pack of problems).
    1. iphone 4S or older won't sync or backup
    2. iTunes store won't open
    The issue I found after using the diagnostics tool in iTunes (which is useless in identify scripting issues or major communication issues), reviewing the windows event log, and reinstalling all apple software and components, was the fact that my spyware and anti virus software was causing a communication error within apple's software.  I use spyware doctor with anti virus.  I had to uninstall spyware doctor in order for iTunes 10.5 to work.  After that, everything worked well and I did a clean install of spyware doctor.
    If the issue still persists, you might have to reset your internet protocol (TCP/IP).  You have to run a command prompt as an administrator and enter the following: netsh winsock reset
    Visit this Microsoft link for more info about resetting your IP:  support.microsoft.com/kb/299357    
    Finally words:  Apple, like all other software companies, continually encounter software glitches and issues because they don't test products correctly before bringing them to market- this has been a reoccurring theme for the last 2-3 years.  The most important aspect of using any software should be functionality, efficiency, ease of use, and above all "A Positive End User Experience."  Wasn't that Steve Job's mantra?  We can all hope that Apple embraces his philosophy and vision for the many years to come.  This, above all, is not a great start for Apple moving forward without their true inspirational leader. 

    Here is what worked for me for both 10.5 and 10.5.1 after hours of frustration with Itunes stopping and shutting down in the middle of a sync or tranferring Apps downloaded on my Ipad2 or Iphone 4:
    Start iTunes in iTunes Safe Mode:
    1.  hold down the Shift and Control key together and click to start iTunes.
    2.  when you see the iTunes icon in the task bar, click on it.
    3.  you will get a box that says "iTunes is running in safe mode.  Visual plug-ins you have installed have been termporarily disabled."   [I don't know what plug-ins I installed but you should clearly see that these so-called visual plug-ins are likely the cause of your issues];
    4. click Continue to open iTunes.
    You could already have your device connected to your computer or do it after opening iTunes in its safe mode.
    Now press your sync button and everything should work fine.
    I also disabled Genius in iTunes preferences but I'm not sure if this is one of the issues causing these types of problems.
    I hope this works.  This may be the workaround for all of us Windows 7 64-bit folks.

  • I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

    I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

    I did that and nothing changed half my songs still have examination marks beside them
    I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • Updating Issue with iTunes 7.0.1.8

    A few weeks ago I made the jump to the newly released iTunes 7.0. I had a slew of issues with this update (which by the way Apple has still not provided a working solution for), which I addressed in detail in this post: http://discussions.apple.com/thread.jspa?messageID=3170496#3170496
    Today I updated to the new iTunes 7.0.1.8. There were no issues during the installation itself, however afterwards is a completely different story. When I attempt to open iTunes, I receive the following error message: "This action is only valid for products that are currently installed."
    My first thought was to see if Quicktime is working normally. It is. No problem there. I thought perhaps I should try repairing the installation. So I went to Settings > Control Panel > Add/Remove Software > iTunes. I attempted to use the 'repair' option. This did not work at all.
    At this point I restarted my computer and uninstalled iTunes. I restarted once again and reinstalled. When the installation had finished I received the prompt, "would you like to run iTunes after the installation is completed?" I clicked 'yes.' iTunes opened, no problem.
    I closed iTunes and attempted to reopen it normally. It would not open, instead giving me the same message: "This action is only valid for products that are currently installed."
    I thought the previous issues with iTunes not recognizing my iPod were bad enough but now I can't even open iTunes at all. This is absolutely unacceptable on Apple's part. It was bad enough that they released 7.0 with all its bugs, but at this point they should have their act together. Instead the problems are getting worse.
    Dell Dimension 4600   Windows XP Pro  

    Please let me know if I can get rid of this feature.
    You sure can.
    iTunes View menu > Hide MiniStore will do the trick.

  • I have not had any issue with Itunes on my PC until recently. Every now and then my Itunes library appears on my screen?  I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch?  Why does ths happen please. I have windows XPPOdany ic

    I have not had any issue with Itunes on my PC until very recently. Every now and then my Itunes library appears on my screen?  I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch?  Why does this happen please as it is driving me crazy!.

    What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)

Maybe you are looking for