Issues with iTunes using over 1.5GB of RAM

Looking for help.
iTunes, 11.0.5.5 is using way too much System Memory as of late.  I have turned off Match and Genius and would like to know if there is anything else I can do.  I am running Windows 7 Professional SP1 (32 bit) on a Dell Latitude E4300 with 4GB RAM.  When I start iTunes it is using around 120MB after I start playing music or watching a TV show or a movie it will slowly climb to around 1.5GB of usage to the point of slowing things down.  I have 100GB of music, 400GB of movies, 125GB of TV Shows, 600MB of books and around 300 apps all on an external 4TB HD.
Any suggestions or thoughts are welcome.  TIA!

Try disable GEPlugin, exit firefox and restart.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Similar Messages

  • Horrible playback issues with iTunes 8 and Airport Express over Wifi

    Hello folks,
    I just upgraded to iTunes 8, and since then, I've been unable to get good playback from my Airport Express with iTunes on my Macbook Pro.
    I get between 5-30 seconds of continuous playback, then a hiccup, ad nauseum, ad inifintum. A five minute track usually ends up taking six-seven minutes to complete, and it's like listening to a CD skip.
    Both the Macbook Pro and the Airport Express are communicating over 802.11n, and worked well before the upgrade to iTunes 8. On my older, slower, crappier Powerbook which only has 802.11g but runs iTunes 7 (in the same room, about two feet from the other laptop), playback is rock solid.
    I've noticed when I monitor the WLAN interface on my MBP with 'netstat -in', I'm seeing a lot of Ierrs, but there's nothing in any of the system logs to indicate a hardware problem (yet, anyway).
    Has anyone else had this issue since upgrading? Should I be looking to get my WLAN NIC fixed, or is it an issue with iTunes 8? Are there diagnostic applications I can use to perform hardware confidence tests on the WLAN NIC?
    cheers,
    Klaus

    My AirPort Express optical out has this problem as well, stutter and very bad sound. But only the new 802.11n modell. A older 802.11g model works without a problem.
    It worked well until I upgraded to iTunes 8, I bought in in May.
    I just had my AirPort Express 802.11n replaced under warranty by Apple but the new unit has the same problem.
    Everyone who is using the optical out and have the stutter problem needs to write to Apple about it so they realize it's a problem and fix it.
    http://www.apple.com/feedback/airportexpress.html

  • I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

    I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

    I did that and nothing changed half my songs still have examination marks beside them
    I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

  • My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

    My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

    Apple is not here. Contact Apple to resolve your issue:
    iTunes Support WorldWide
    or
    iTunes Support by eMail ww
    Cheers,
    GB

  • Can't sync device with itunes using WiFi

    I want to sync my iPad with iTunes using WiFi, I found some instructions here, and I achieved all of it, and when trying to sync using the device I go to Settings > General > iTunes Wi-Fi Sync > Sync , but when removing the device usb from the pc and connecting it to an outlet power source the sync button in the device is disabled and the device displays a message like "waiting for PC_Name to be available" although the iTunes is opened in the PC and both the PC and the iPad are connected to the same WiFi, I tried to solve the problems using the instructions here but it didn't solve my problem.

    finally found the solution, after a lot of searching I found the solution here at linders09 answer:
    "I had the same problem but I was finally able to fix it. TIf you still haven't fixed this you can ry this. Go to control panel > rogrms and features > find the apple mobility device support > right click and hit repair. After I did this I had no issues syncing over wifi. Hope this helps!"

  • Issues with iTunes Match on iPhone

    I am having some frustrating issues with iTunes Match and my iPhone 4 iOS 5.
    1) When using cellular data (3G), the songs simply do not play from the music app. It works fine when connected to wifi.
    Under settings, cellular data has been enabled for use in the music app.
    2) iTunes match constantly switches off spontaneously on iPhone. I need to go back to the settings to enable it every single time I use the app.
    I feel that iTunes Match was a total waste of money, considering the only reason I invested in it was to have my library accessible from my iPhone.
    Any help would be much appreciated!

    iTunes match doesn't work like that and if you don't like it then your best option is to turn it off and go back to syncing. However if you make sure that your device has a good Wi-Fi connection, re-downloading all your content shouldn't really be a big issue.

  • Issues with iTunes Media Folder resetting to default location

    This is my 1st post to the Apple Support Community (the problem I have is with iTunes, but I believe it also has to do with the way OS X Lion is setup and the way Networked Drives are mounted in it) ...so I hope I've posted this to the correct place. Thank you in advance for any help I'm going to get here. I have no expirience with Mac OS X's (coming from a Windows background) so please bear with me, but I am a S/W Tester by trade so I'd like to think I'm resonably IT literate.
    ISSUE:
    I have a problem with iTunes and my Media Folder resetting constantly - my Setup is a MacBook Air, with an Apple Time Capsule 2TB which is providing my Wifi Network.
    I want to setup iTunes so that it will permenatly point to my Data Folder on the Apple Time Capsule, so that when I download purchases, synch iPhones, or rip Music it will end up on the Apple Time Capsule and not on the MacBook Air's SDD Drive
    I though I had managed to do this, but after I shut down the MacBook Air, and then logged back in to rip some music, iTunes had repointed to the MacBook Air's SDD, and all the CD's i ripped were saved there instead of the Apple Time Capsule. So far I have done the following;
    STEPS CARRIED OUT SO FAR:
    1) Connected the MacBook Air to the Wifi Network provided by the Apple Time Capsule - I can see the Time Capsule in the Finder app.
    2) Gone to GO MENU > LOCATE SERVERS and selected the top level DATA FOLDER on the Apple Time Capsule....I believe that I've managed to create an ALIAS (Shortcut?) that points to this, and it's on my Desktop.
    3) Next I went to SETTINGS > USERS > and made sure that ALIAS (Shorcut?) to the DATA FOLDER on the Apple Time Capsule is always loaded up on startup for my UserID
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    5) I then went to ITUNES PREFERENCES and changed the MEDIA FOLDER it pointed to, from the MacBook Air's SDD to the one on the Apple Time Capsule.
    6) Then I logged out and shut down the MacBook Air.
    7) I powered on the Macbook Air, and logged in, then ripped some music - I then found that iTunes had created a new iTunes Folder for my User on the MacBooks SDD and all the CD's I ripped had been saved there. Also under the ITUNES PREFERENCES menu, it looks like iTunes had reset the location of the MEDIA FOLDER...
    I don't know if this is an issue with iTunes or not - I'm assuming it's a setup issue on my part, and that maybe I haven't created a permenant link to the Apple Time Capsule as I thought I had. If it helps I was attempting to do something similar to whats described in this YouTube video; http://www.youtube.com/watch?v=mA399lEXRTE
    Thanks again for any help
    Regards
    Codename21

    Codename21 wrote:
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    if you really moved your entire iTunes folder, the next step needs to be launching iTunes while holding the option (⌥) key, clicking on choose library at the prompt, and selecting the iTunes folder you moved to the TC.
    as for auto-mounting the TC's disk on startup, you might find this discussion interesting.

  • Issues with itunes 10.5 on Windows 7 (32 Bit) When Trying to sync iphone 4S or older

    I see a lot of people out there, specifically windows OS owners (xp all the way to 7), having issues with iTunes 10.5.  Here are the following issues I've encountered (some may only have one problem, others my have a combo pack of problems).
    1. iphone 4S or older won't sync or backup
    2. iTunes store won't open
    The issue I found after using the diagnostics tool in iTunes (which is useless in identify scripting issues or major communication issues), reviewing the windows event log, and reinstalling all apple software and components, was the fact that my spyware and anti virus software was causing a communication error within apple's software.  I use spyware doctor with anti virus.  I had to uninstall spyware doctor in order for iTunes 10.5 to work.  After that, everything worked well and I did a clean install of spyware doctor.
    If the issue still persists, you might have to reset your internet protocol (TCP/IP).  You have to run a command prompt as an administrator and enter the following: netsh winsock reset
    Visit this Microsoft link for more info about resetting your IP:  support.microsoft.com/kb/299357    
    Finally words:  Apple, like all other software companies, continually encounter software glitches and issues because they don't test products correctly before bringing them to market- this has been a reoccurring theme for the last 2-3 years.  The most important aspect of using any software should be functionality, efficiency, ease of use, and above all "A Positive End User Experience."  Wasn't that Steve Job's mantra?  We can all hope that Apple embraces his philosophy and vision for the many years to come.  This, above all, is not a great start for Apple moving forward without their true inspirational leader. 

    Here is what worked for me for both 10.5 and 10.5.1 after hours of frustration with Itunes stopping and shutting down in the middle of a sync or tranferring Apps downloaded on my Ipad2 or Iphone 4:
    Start iTunes in iTunes Safe Mode:
    1.  hold down the Shift and Control key together and click to start iTunes.
    2.  when you see the iTunes icon in the task bar, click on it.
    3.  you will get a box that says "iTunes is running in safe mode.  Visual plug-ins you have installed have been termporarily disabled."   [I don't know what plug-ins I installed but you should clearly see that these so-called visual plug-ins are likely the cause of your issues];
    4. click Continue to open iTunes.
    You could already have your device connected to your computer or do it after opening iTunes in its safe mode.
    Now press your sync button and everything should work fine.
    I also disabled Genius in iTunes preferences but I'm not sure if this is one of the issues causing these types of problems.
    I hope this works.  This may be the workaround for all of us Windows 7 64-bit folks.

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • Updating Issue with iTunes 7.0.1.8

    A few weeks ago I made the jump to the newly released iTunes 7.0. I had a slew of issues with this update (which by the way Apple has still not provided a working solution for), which I addressed in detail in this post: http://discussions.apple.com/thread.jspa?messageID=3170496#3170496
    Today I updated to the new iTunes 7.0.1.8. There were no issues during the installation itself, however afterwards is a completely different story. When I attempt to open iTunes, I receive the following error message: "This action is only valid for products that are currently installed."
    My first thought was to see if Quicktime is working normally. It is. No problem there. I thought perhaps I should try repairing the installation. So I went to Settings > Control Panel > Add/Remove Software > iTunes. I attempted to use the 'repair' option. This did not work at all.
    At this point I restarted my computer and uninstalled iTunes. I restarted once again and reinstalled. When the installation had finished I received the prompt, "would you like to run iTunes after the installation is completed?" I clicked 'yes.' iTunes opened, no problem.
    I closed iTunes and attempted to reopen it normally. It would not open, instead giving me the same message: "This action is only valid for products that are currently installed."
    I thought the previous issues with iTunes not recognizing my iPod were bad enough but now I can't even open iTunes at all. This is absolutely unacceptable on Apple's part. It was bad enough that they released 7.0 with all its bugs, but at this point they should have their act together. Instead the problems are getting worse.
    Dell Dimension 4600   Windows XP Pro  

    Please let me know if I can get rid of this feature.
    You sure can.
    iTunes View menu > Hide MiniStore will do the trick.

  • Having issues with iTunes 11.1.5 on Windows 8.1

    Ever since I've refreshed my windows computer two weeks ago. I am having issues with iTunes 11.1.5. For some reason I can access the iTunes Store, but most of the time when I do something internet related on iTunes, the app is either stuck on checking for downloads or when trying to sign in. I am trying to update all my apps but only a couple out of 30 actually start downloading but they keep getting stuck at "processing file". I have used another computer with Windows 8.1 with the same version of iTunes and its downloading app updates fine.

    it works at first then after trying to update a few apps (the third one this time) iTunes again stops working and gives me the 8008 error.
    Okay ... let's try seeing if that one is the root cause of the errors.
    Try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting
    Does that calm down the 8008s?

  • TS4124 i didnt have issues with itunes before. but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial...wont open itunes store. im looking for  music

    i didnt have issues with itunes before...but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial....but still cant open itunes store. im looking for music to buy.

    Hello bogley
    Check out the article below for troubleshooting access to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G. 

  • Issue with  OBIEE ROW_NUMBER() OVER (PARTITION BY)

    Hi All,
    I am facing some issue with the ROW_NUMBER() OVER (PARTITION BY function in the query that is being generated. I am currently on version 11.1.1.6. I have 1 FACT and 1 Dimension table. Within the dimension I have create a level based hierarchy namely REGION -> GROUP - DIVISION etc. Now the problem is that the OBIEE automatically applies *"ROW_NUMBER() OVER (PARTITION BY T9.PRODUCT_TYPE_DESC, T130.DIVISION_DESC, T130.REGION_DESC ORDER BY T9.PRODUCT_TYPE_DESC ASC, T130.DIVISION_DESC ASC, T130.REGION_DESC ASC) "
    to the query where in it is not required at it returns with 3 different row numbers. If i remove this line and the where clause I am able to get correct results however its not working whatever I do in the RPD. Please advise.
    WITH
    SAWITH0 AS (select D1.c1 as c1,
    D1.c2 as c2,
    D1.c3 as c3,
    D1.c4 as c4,
    D1.c5 as c5,
    D1.c6 as c6
    from
    (select sum(T157.PL_GRAND_TOTAL) as c1,
    sum(T157.TRANSACTION_AMT) as c2,
    T130.DIVISION_DESC as c3,
    T130.REGION_DESC as c4,
    T130.GROUP_DESC as c5,
    T9.PRODUCT_TYPE_DESC as c6,
    ROW_NUMBER() OVER (PARTITION BY T9.PRODUCT_TYPE_DESC, T130.DIVISION_DESC, T130.REGION_DESC ORDER BY T9.PRODUCT_TYPE_DESC ASC, T130.DIVISION_DESC ASC, T130.REGION_DESC ASC) as c7
    from
    DIM_ALL_MODULES_REF T9,
    DIM_MIS_TREE_REF T130,
    DIM_DATE_SERIES T123,
    FCT_ALL_MODULES_TRANS T157
    where ( T9.SGK_MIS_ID = T130.SGK_MIS_ID and T9.SGK_MODULE_ID = T157.SGK_MODULE_ID and T123.SGK_TIME_ID = T157.SGK_TIME_ID and T123.TRANS_DATE between TO_DATE('2011-01-01 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') and TO_DATE('2011-03-31 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') )
    group by T9.PRODUCT_TYPE_DESC, T130.DIVISION_DESC, T130.GROUP_DESC, T130.REGION_DESC
    ) D1
    where ( D1.c7 = 1 ) ),
    SACOMMON42934 AS (select T130.DIVISION_DESC as c2,
    T130.REGION_DESC as c3,
    T130.GROUP_DESC as c4,
    T9.PRODUCT_TYPE_DESC as c5,
    sum(T258.BEG_NMK_EQ_COST_AMT) as c6,
    T123.TRANS_DATE as c7,
    sum(T258.END_NMK_EQ_COST_AMT) as c8
    from
    DIM_ALL_MODULES_REF T9,
    DIM_MIS_TREE_REF T130,
    DIM_DATE_SERIES T123,
    FCT_MODULES_BEG_END_BAL T258
    where ( T123.SGK_TIME_ID = T258.SGK_TIME_ID and T9.SGK_MIS_ID = T130.SGK_MIS_ID and T9.SGK_MODULE_ID = T258.SGK_MODULE_ID and T258.PRODUCT_TYPE_ID = 2 and T123.TRANS_DATE between TO_DATE('2011-01-01 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') and TO_DATE('2011-03-31 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') )
    group by T9.PRODUCT_TYPE_DESC, T123.TRANS_DATE, T130.DIVISION_DESC, T130.GROUP_DESC, T130.REGION_DESC),

    Hi Dhar,
    Thanks for replying back. But the ROW_NUMBER thing is inserted with the "WITH SUPPORTED" clause only but that is something which are the default settings. However, I notice that ROW_NUMBER() OVER (PARTITION BY) lines are erratic and are not consistent. So sometimes the drill works properly when no ROW_NUMBER() OVER (PARTITION BY) is generated but other times data is wrong. I am not sure why this behaviour is erratic even though I select the same values.
    This is surely a product problem as the condition where c7 = 1 filters the result and does not take into account all values.
    Even when I do not use WITH_SUPPORTED clause the stitch does not happen properly. Please advice if this is ever going to be by Oracle or any work around for this?
    Thanks

  • Sorry the answer to my previous question did not help....when trying to get app message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

    Sorry the answer to my previous question did not help....when trying to get new app installed on iPad  message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

    Whatever the reasons are that you think the problem exists, you will not be able to resolve it on your own. Did you see this at the bottom of the support article that I suggested that you read?
    Additional Information
    If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance.
    You should probably contact iTunes Support.

  • Issues with itunes on start-up

    I'm not able to use any of the functions of iTunes anymore.  Since the last couple updates.  When I start iTunes it takes a long time for the library to load(understandable-I have a large music library stored on an external hard drive) Once the library has finally loaded and iTunes opens, I just get the colored pinwheel of death. Any ideas?

    Hey david472,
    Thanks for the question. I understand you are experiencing issues with iTunes for Mac. To isolate and troubleshoot this issue, try opening iTunes in safe mode:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    There are several ways in which an add-on can cause iTunes to act erratically, such as those listed below:
    - Loss of iTunes functionality, such as the Visualizer.
    - Distortion or irregularity in the iTunes interface.
    - Slow performance.
    - iTunes won't open or quits unexpectedly.
    - You see an alert while syncing stating "... cannot be synced. A duplicate file name was specified."
    If you notice any of the above symptoms or other unusual behavior, you can disable any plug-ins not manufactured by Apple by opening iTunes in Safe Mode. This is done by holding down the Option and Command keys (on Mac OS X) or holding down the Shift and Control keys (on Windows) while opening iTunes. If performed correctly, you should see the following dialog before iTunes finishes starting up:
    Thanks,
    Matt M.

Maybe you are looking for