Issues with locking up in edit mode

Does anyone have a solution when the ap locks up in the edit mode? No icons for edit appear and I cannot escape the mode. I have to delete and download again which deletes all of the data... Not good

We should not lock up at all...and we are not aware of this. If you could share the detailed steps, and perhaps the document that this is happening with, that would be appreciated.
Also, if you do experience a lock-up, you don't need to delete the application and reinstall. There are a couple different ways to force-quit any iOS application
1) Hold down the power button on the device to force it to shut down and restart
2) Force close the app using these steps
go back to the iOS home screen, showing all of the app icons
double-click the home button. A row should appear on the bottom of the screen showing all of the 'running' apps.
swipe left-right until you see the app you want to force-exit
Long-press on the app you want to force-restart. All of the icons in that bottom row should start wiggling, with a icon in the top left corner
tap the icon on the app you want to force-exit
Click the home button to close this view of the running apps again.

Similar Messages

Issue with locked sessions

I am having some issues with locked sessions. I attempt to clear the
connections from the console but it doesn work. The only way to clear the
session is to reboot server. NW6.0 SP5

NW6 SP5 needs nw6nss5c in order for NSS to work properly; once applied
then do
nss /poolrebuild /purge
on all pools. Make sure you have tested backups first, just in case.
Also Load Monitor - Server Parameters - NCP. Set Level 2 OpLocks Enabled
= Off, and Client File Caching Enabled = Off.
What lan driver, date and version, on the server?
Andrew C Taubman
Novell Support Forums Volunteer SysOp
http://support.novell.com/forums
(Sorry, support is not provided via e-mail)
Opinions expressed above are not
necessarily those of Novell Inc.

Performance Issues with Debugging even in Display Mode

Hi not certain if this would sit in Security, ABAP or Basis, but lets start here as it is security related.
S_DEVELOP with any activity on DEBUG on a production system is a concern, but what are the performance related issues when a super user has to go into debug in display only on a production system because of a really complex issue?
I've heard in the past of a scenario where system performance was impacted, and we have notes around the allocation of S_DEVELOP display DEBUG access to this point. (I've summarised these below)
The risk with debug is associated with the length of time that the actual debugging process is being performed.
u2022 Work processes are dedicated solely to the users for the duration of the debug. If these are being performed for a long time, these can cause issues with not enough work processes being available.
u2022 It can cause DB2 locks. If the debug session last awhile, DB2 locks are not released. This impacts the availability of tablespaces, thus, affecting various transactions running across the system.
Even with these concerns, security will often get asked for debug display access.
As security is about risk identification, assessment and then controlled access what do other organisations do?
Options (not exhaustive) are "No Debug ever" or "Debug display only via a fire fight or super user on a time limited basis".
We are currently in the "debug display only via fire fight" camp, but would like to canvas opinion on this.
As one of the concepts of security is Availability of data (and to an extent ensuring the systems are up and running) do the performance risks push the security function to the "No Debug Ever" stance.

If you need to debug in production, then 9 times out of 10 you need to do root-cause analysis: The developer is the problem.
Writing sloppy code and not testing properly should not be an excuse for debugging in production.
But of course, there are exceptions even when you do try to keep them to a minimum.
To add to Jurjen's comments, also note that the debugger only has a limited capability of doing a rollback. So you can quite easily and unintentionally create inconsistencies in the system - also in display mode - which is an integrity problem, and typically more critical than availability problems or even potential confidentiality concerns.
Cheers,
Julius
Edited by: Julius Bussche on May 15, 2009 10:50 AM

Problem with Opening Outline in edit mode in Essbase

Hi ,
I am trying to open an outline in edit mode in EAS console, but I am getting the followong error
"There is a problem with locking the outline object ,error # 1,051,675"
Kindly help me to fix the issue.
Thanks,
Satheesh

Did you try google?
locking th eoutline error (Again a new feature of OTN)
Can you view the outline, if yes try the steps in Error Opening Database Outline in Edit Mode : "There is a problem with locking the outline object, error # 1,051,675" [ID 1491030.1]
I've seen this error (not sure about the number) where EAS cannot allocate more memory (for loading the outline). I'll try stopping apps and start this one and see if it fixes the issue.
Regards
Celvin
http://www.orahyplabs.com

Effects lock up in Edit mode

Hello,
I'm sifting my way through Audition 3. When I put an Audio Clip in the Edit mode of Audition and then add an Effect I get the following:
1. The Effect will be added and it will properly Preview. I will STOP the Preview (I have waited as long as 5 seconds after stopping) - and then click on "OK" to add (render) the effect. Audition will immediately lock up. NOTHING will be available. I then have to open the Task Manager and close Audition.
2. If I re-open Audition it will work again. The Effect will not have rendered though.
3. Also, if I Preview the effect and then "Cancel" (as opposed to "OK") Audition will continue to function. So, the problem seems to when the Effect is to be rendered.
4. I tried all four of the computers available in the facility and they all did the same thing. So, I doubt it is anything specific to the computer used.
Thank you for any help, Tom

The OS is XP service pack 3. Computers are Pentium 4 about 2.4 gig with 2 gig of RAM.
The clips is very small. About 5-10 seconds of a single wav. file. It is the only clip I have imported, so otherwise the bin is empty save for this one small clip. Nothing is in the Multitrack Timeline. Certainly not a taxed system - under the circumstances.
No, this is not on a network. I have yet to check the temporary files location, but it likely is wherever Audition defaults it to.
I doubt the temp file is running out of space, the drive is less than half full and the install of Audition is new. It occurs in a fesh session with only one clip imported.
These are stand alone computers not on the network. Note, I also have this problem on my laptop (that would have the problem on 5 computers now).
It seems like maybe I am doing something wrong??? - I will Import a file (from the Audition "Classroom in a book" CD) in the Multi Track view. Note, the file is place on the harddrive, not sources from the slower CD. I then double click on it (in the bin) to open in the Edit view. I will double click on the Effect (Echo for instance) to add it. I will Preview the Effect and it plays promptly and properly. I will stop the Previewing of the Effect, - or let it play all the way through. I have waited at least 5 seconds after the Preview stops. - - - I then click on "OK" to render the Effect and Audition locks up every time with every effect I have tried.
I just did some more testing. If I don't Preview (play the clip with the Echo) and just click on "OK" to render the clip, it does not seem to lock up. It renders correctly in seconds. So, what is it about the Previewing of the Effect that causes the lock up??? It is not locking up on the Preview, but only on render after I Preview. I can't imagine it is still processing the Preview if I play it to the end before clicking "OK" to render.
Thanks, Tom

Pre-n enabler seems to cause issues with lock up/beach ball

I just received my new C2D MBP yesterday with 3G of RAM and all was peachy. I decided to install the $1.99 Pre-N enabler patch from Apple and it appears that I'm not alone in having that cause system lock ups and beach balls from ****.
I unfortunately seem to be in the same boat. It runs for awhile and then all of a sudden it will just lock up and I'll get the spinning beach ball from **** forever, until I reboot.
I'm using mine with a NetGear Pre-N wireless router and while I'm getting 140kpbs connections I am getting a lot of receive errors and the machine just goes off to la-la land.
I was worried about something else until I read these posts over in Internet & Networking and now I'm wondering if there really is an issue with whatever the "enabler" did. It ceratinly appears to be this. Nothing else seems to cause it this kind of beach ball death.
So now I guess we need to look for an "un-enabler" patch. Just out of curiosity where do we email problems like this to get resolved?
UGGHHHHHHH!!!
Peter

I have this same problem. I reported a bug to apple bug id#4990056
Here is what i wrote:
10-Feb-2007 10:36 PM Brooks Roy:
Summary:
I recently got a Linksys WRT350N 802.11n router and using it with my macbook pro core 2 duo. The router is firmware version 1.03.2.
After installing the enabler from the apple site i verified it upgraded properly and it shows a/b/g/n for my airport card. However the computer has been locking up more and more. I finally narrowed it down to the airport card. Here is what happens:
Steps to Reproduce:
With regular airport usage, the mac will all of the sudden give the spinning 'beach ball' and just sit there. A simple http download will stop and the mac will become unresponsive. I cannot launch new applications. The icons will bounce in the dock but never open. I cannot force-quit any applications. My only option is to hold down the power button for a hard shutdown.
I can almost duplicate the issue 7 times out of 10. Sometimes it takes 15 minutes or so before it locks up, sometimes its almost immediately.
I have done a full fsck and permissions. I also downloaded tiger cache cleaner and cleaned all settings. I have also booted off the apple install cd and done a extended full RAM check on the 2Gb installed in my computer.
I have restored my IO80211Family.kext from my other macbook pro (regular core duo) and my problems have gone away. I am 100% sure there is a bug with the 802.11n enabler and the Linksys WRT350N.
I do not have any special configuration on my linksys, just MAC based wireless authentication.
When using the MacBook pro on the WRT350N in 802.11g without the latest 802.11n enabler the mac performs fine and does not become unresponsive.
Expected Results:
I expect the mac to perform just as a 802.11g network will work with increased transfer speeds.
Actual Results:
See above.
Regression:
It only occurs when using network traffic (i.e Mail.app, Safari browsing sites, etc. Any application that requires Airport.
Notes:
I am using the original IO80211Family.kext driver that does not have 802.11n support and it works properly. Also using builtin ethernet with airport off and the 802.11n driver works (obviously).

Kindle Fire & Adobe Air issues with scaling & bottom menu - GPU Mode only

Hi,
Long post ahead, please buckle down for a while.
I'm having issues with the Kindle Fire and the bottom 20 pixel menu in GPU mode, CPU mode behaves correctly. The project was created with flash cs5.5, the stage size is 1024x600 and I've set the NO_SCALE flag. When the app is run on the Kindle Fire the Kindle scales it to 1024x580 for the bottom 20 pixel menu. If I create the project as 1024x580 it still scales it down and then centers it vertically introducing a 10pixel black bar at the top and I would assume a 10 pixel black bar at the bottom under their menu. In CPU mode the app is not scaled and the bottom 20 pixels is obscured.
The problems I have encountered so far are incorrect mouse locations as reported in various mouse events. Messed up scrollRects when I try and clip something for display. Not being able to press buttons because of the incorrect mouse coordinates, the further down on the screen the more incorrect the buttons are. You can click below a button near the bottom of the screen and have it activate whereas a button at the top acts perfectly. This is due to the accumulated error value from the yPos * scaleValue.
The mouse positions are off exactly by a scale factor of 600 / 580 (1.034).
The video below shows the problems, sorry for the poor video handling. The red line in the video is drawn in the center of the y position detected on a mouse move and mouse down event, but shifted to the left for visibility. The center of that stylus is where it should be at all times, as you can see it isn't. You can also see displayed the buttons not working correctly, they are clearly being activated when the press on the screen is not over the button (indicated by the red line).
The circle in the middle of the screen has it's scrollRect set to to the width and height of the circle, as you can see it is clipped.
At the end of the video I press the power button then press it again to unlock, you can see the screen looks good for a split second then gets resized. Once resized the circle becomes clipped again. If I were fast enough I would assume the buttons would work correctly as well. Watch closely, it happens fast.
Oh, and the app works fine on the desktop in either GPU or CPU mode. The app also works fine in GPU and CPU mode on my iPad2, Google HTC Nexus One, Nook Color and my 4th gen iPod Touch.
Now whos issue is this? Adobes, Amazons or mine? I know what the problem is but don't know how to fix it.
Youtube video link:
http://youtu.be/660O3YMK9k8
Thanks for your time!
PS: if anyone wants the .fla for testing themselves, just ask and I will post a link to it.

I'm going to forward this along to our android team for their review. In the meantime, could you open a bug on this over at bugbase.adobe.com? Please post back with the URL so that others affected can visit the bug and cast their votes.
Thanks,
Chris

Assign focus on text field associated with tree item in edit mode

The JavaFX home page has an example for how to edit the label associated with a tree item using a cell factory (see sample code below). However, if you select a tree item and then either mouse click or select the Enter key to start editing, the text field doesn't get focus even though the startEdit() method invokes textField.selectAll(). I tried invoking textField.requestFocus(), but that didn't work. Is there a way to ensure that the text field gets focus when the tree item is in edit mode?
I'm using JavaFX 2.1 GA version on Windows 7.
Thanks.
Stefan
@Override
public void startEdit() {
super.startEdit();
if (textField == null) {
createTextField();
setText(null);
setGraphic(textField);
textField.selectAll();
public class TreeViewSample extends Application {
private final Node rootIcon =
new ImageView(new Image(getClass().getResourceAsStream("root.png")));
private final Image depIcon =
new Image(getClass().getResourceAsStream("department.png"));
List<Employee> employees = Arrays.<Employee>asList(
new Employee("Ethan Williams", "Sales Department"),
new Employee("Emma Jones", "Sales Department"),
new Employee("Michael Brown", "Sales Department"),
new Employee("Anna Black", "Sales Department"),
new Employee("Rodger York", "Sales Department"),
new Employee("Susan Collins", "Sales Department"),
new Employee("Mike Graham", "IT Support"),
new Employee("Judy Mayer", "IT Support"),
new Employee("Gregory Smith", "IT Support"),
new Employee("Jacob Smith", "Accounts Department"),
new Employee("Isabella Johnson", "Accounts Department"));
TreeItem<String> rootNode =
new TreeItem<String>("MyCompany Human Resources", rootIcon);
public static void main(String[] args) {
Application.launch(args);
@Override
public void start(Stage stage) {
rootNode.setExpanded(true);
for (Employee employee : employees) {
TreeItem<String> empLeaf = new TreeItem<String>(employee.getName());
boolean found = false;
for (TreeItem<String> depNode : rootNode.getChildren()) {
if (depNode.getValue().contentEquals(employee.getDepartment())){
depNode.getChildren().add(empLeaf);
found = true;
break;
if (!found) {
TreeItem<String> depNode = new TreeItem<String>(
employee.getDepartment(),
new ImageView(depIcon)
rootNode.getChildren().add(depNode);
depNode.getChildren().add(empLeaf);
stage.setTitle("Tree View Sample");
VBox box = new VBox();
final Scene scene = new Scene(box, 400, 300);
scene.setFill(Color.LIGHTGRAY);
TreeView<String> treeView = new TreeView<String>(rootNode);
treeView.setEditable(true);
treeView.setCellFactory(new Callback<TreeView<String>,TreeCell<String>>(){
@Override
public TreeCell<String> call(TreeView<String> p) {
return new TextFieldTreeCellImpl();
box.getChildren().add(treeView);
stage.setScene(scene);
stage.show();
private final class TextFieldTreeCellImpl extends TreeCell<String> {
private TextField textField;
public TextFieldTreeCellImpl() {
@Override
public void startEdit() {
super.startEdit();
if (textField == null) {
createTextField();
setText(null);
setGraphic(textField);
textField.selectAll();
@Override
public void cancelEdit() {
super.cancelEdit();
setText((String) getItem());
setGraphic(getTreeItem().getGraphic());
@Override
public void updateItem(String item, boolean empty) {
super.updateItem(item, empty);
if (empty) {
setText(null);
setGraphic(null);
} else {
if (isEditing()) {
if (textField != null) {
textField.setText(getString());
setText(null);
setGraphic(textField);
} else {
setText(getString());
setGraphic(getTreeItem().getGraphic());
private void createTextField() {
textField = new TextField(getString());
textField.setOnKeyReleased(new EventHandler<KeyEvent>() {
@Override
public void handle(KeyEvent t) {
if (t.getCode() == KeyCode.ENTER) {
commitEdit(textField.getText());
} else if (t.getCode() == KeyCode.ESCAPE) {
cancelEdit();
private String getString() {
return getItem() == null ? "" : getItem().toString();
public static class Employee {
private final SimpleStringProperty name;
private final SimpleStringProperty department;
private Employee(String name, String department) {
this.name = new SimpleStringProperty(name);
this.department = new SimpleStringProperty(department);
public String getName() {
return name.get();
public void setName(String fName) {
name.set(fName);
public String getDepartment() {
return department.get();
public void setDepartment(String fName) {
department.set(fName);
Edited by: 882590 on May 22, 2012 8:24 AM
Edited by: 882590 on May 22, 2012 8:24 AM

When you click on a selected tree item to start the edit process is the text in the text field selected? In my case the text is not selected and the focus is not on the text field so I have to click in the text field before I can make a change, which makes it seem as if the method call textfield.selectAll() is ignored or something else gets focus after method startEdit() executes.

Issues with video quality after editing in Premiere Elements. Please help!!!

I am having issues with the quality of video output from Premiere Elements. I tried to combine 4 videos clips that I took (all were crystal clear when viewed prior to combining them in Premiere Elements). The first clip is quite pixelated, the second has wavy lines running across it the whole time (recorded webinar), and the third clip looks crystal clear. (FYI...first clip and third clip were both taken using the exact same settings on my Canon) I am not very tech "savvy". I am guessing it has something to do with the way I saved or "shared" the video after editing? But I have NO IDEA what settings I need as I am not very "tech" savvy! I want to upload the finished product to Vimeo. I looked on Vimeo and followed instructions from a tutorial that a Premiere Elements user posted about how to save the best quality video for uploading to Vimeo, and the quality turned out FAR WORSE than the first time I saved it. Please help!!! Thanks so much!

Thanks for your response John! Do you think my issue may be due to the way I initially "set up" the project when I created a new project from the very beginning? I am operating on Premiere Elements 10, so I do not see an option for sharing online directly to vimeo....only facebook and Youtube. I am combining 4 video clips. 3 of the 4 clips were shot on my Canon EOS 60D, and 1 of the video clips was a recording of a PowerPoint based webinar that we did via Meeting Burner (meetingburner.com). Since I am combining more than 1 video format, is it likely that I will run into quality issues? The strange thing was that 2 of the clips shot with my Canon showed up blurry after exporting/sharing my final video, but one of them was still crystal clear. This doesn't make any sense to me since I did not change any settings on my Canon. I didn't see any specific tutorials on setting up the project to match the video from that list of Tutorial links.

Collaboration:Issue with Exchange Calendar Transport & Edit Local Features

I have installed the Exchange Transport to interface the Outlook calendar with our portal calendar. When I attempt to access the Calendar, I receive a blank calendar section (no errors). I have checked permissions and SAP notes, but I can't figure out where the issue is. I have the same problem with the "Edit Local" feature. When I attempt to edit a document, nothing happens (no errors). I even tried installing the Java RTE 1.4, but I do not receive any indicatation that the RTE or ActiveX component is even being used.
Thanks

Hi Vick,
Based on my research, I suggest you should upgrade the AD first.
1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. And you also should upgrade the
Configuration Partition and the Domain Partition with the following command:
Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

M500 Issues with locking up (A TCG Command has returned an error)

Here's the issue, I have researched this A TCG Command has returned an error problem and it seems it's all related to bitlocker problems and or sleep issues, I have all power saving features off, I do "not" have bit locker enabled or running.The problem lies when doing anything that requires hard drive usage other than simple browsing, it can range from 10x in 5 mins on a game and require force reboots and thats the exact error message in the event viewer at the time of crash everytime, I have crashed hundreds of times, and it's getting to the point to where my SSD isn't even fun to own currently, if any of you guru's on here could help that'd be great. Oh and secure boot is turned off (also read about that) It does it with it on or off, doesn't matter. And I had this problem with the default firmware (m03) and the new firmware (m05) I am also on Windows 8.1 64bit. Here are the logs from the event viewer. A TCG Command has returned an error.Desc: AuthenticateSession
Param1: 0x1
Param2: 0x60000001C
Param3: 0x900000006
Param4: 0x0
Status: 0x12
EnhancedStorage-EhStorTcgDrv
Opcode : TcgLib
A TCG Command has returned an error.
Desc: AuthenticateSession
Param1: 0x1
Param2: 0x60000001C
Param3: 0x900000006
Param4: 0x0
Status: 0x1
EnhancedStorage-EhStorTcgDrv
Opcode : TcgLib
Everytime I google "A TCG command has returned an error" the first thing that even comes up in google searches is a slew of M500's with bitlocker problems or sleep / power saving option problems, but I do not have any of those enabled. Thanks in advance.

For sure the different speeds is the difference between the ASMedia and the Intel ports - http://www.tomshardware.com/reviews/storage-controller-performance-ssd,3540.html
In general Intel ports are suggested as preferred. Perhaps they are more reliable (I don't have any data for that) and they have more frequent driver support/updates.
It is hard to tell if it is possible that ASM controller is a contributor to the TCG error messages and/or to system freezes/crashes.
I think it is worth to note that as far as I know hardware based drive encryption (eDrive type) doesn't work with Intel RST drivers and it works only with inbox MSAHCI driver. That makes me think that the storage driver can affect the way the BitLocker works.
What is your Windows 8.1 version, is it Pro or Enterprise? W8.1 Pro or Enterprise clean installation can switch the drive to TCG Opal mode and it is done silently. W8.1 do it happily without user's permission (and in many cases without user's knowledge). So my guess is that after silent switching the drive to TCG Opal mode the OS is using some parts of BitLocker... code/engine/mechanisms perhaps.
You have notice the crashing only really happens when games are being played. I was wondering that maybe the crashes are not related to TCG errors at all and they are related to some other broken driver rather than TCG thing?
It is possible this is something a reinstall might fix and I would probably try that. But first I would try to switch drive to Intel driven connector and then check and verify all major drivers installed in the system, including motherboard's BIOS - http://www.asus.com/Motherboards/MAXIMUS_VI_HERO/HelpDesk_Download/
If that wouldn't help I would probably do as suggested by r0m30.
4. PSID revert the drive (and possibly secure erase it), set a BIOS password on the drive if your motherboard supports it and reinstall window.
I think romeo was refering to HDD password. It is little weird but motherboard's manual doesn't mention anything about HDD/Drive/Disk/ATA password.
In case the mobo supports Drive/ATA password I would do following:
- PSID revert the drive
- set HDD password
- clean OS install
In case it doesn't support ATA password (that would be odd but possible I guess):
- secure erase the drive
- clean OS install
Drives connected to Intel's ports of course

Issue with live playback while editing - Premiere Elements 10

Hi there, It's been a while since I used Premiere, and decided that I would make a video. I've copied all of the media across and started editing the clip. I dragged the first clip onto the timeline and clicked the play button so I could find where I wanted to make the first cut. And there was no video, just a still frame from where the marker was. If I click the live playback area, it pauses the video and updates the still. I have tried updating the software to see if it was a bug that had been patched, but it's still there. I've never had this issue before, and would appreciate any help you guys could lend.
Thanks in advance,
-Chris.
Extra info:
OS: Windows 7 home premium 64 bit
Premiere version 10.0 (20110902.mol11.b123.280463)
Project settings [email protected] FPS, dslr preset in PAL
I'm working with mp4 files from my gopro.

I've been reading this with interest because I'm having the same issue since updating the nVidia drivers at the end of November. There is a conflict that is NOT resolved by completely uninstalling and rolling the drivers back.
Previews just will not display in the monitor in Adobe Premiere Elements 11. Audio is fine.
Clicking on the monitor window allows me to view the frame, and I can advance the frames one at a time and view them, but when I select 'Play' I just get a blank screen.
NOTE: SAME FILE AND SOFTWARE work fine on roommate's GTX550 with nVidia drivers from Jan 18 2013.
I'm running NVIDIA GeForce GTS 240,
Win7 64-Bit OS;
2.93 gigahertz Intel Core i7 870;
12 GB RAM;
Board: Dell Inc. 0G3HR7 A00 Serial Number: ..CN736040BU01GG. Bus Clock: 133 megahertz
BIOS: Dell Inc. A05 07/08/2010;
ASUS VE276 [Monitor] (27.2"vis, s/n B1LMTF048504, January 2011).
Up until the last driver update everything worked great.

Download issues with Forward, Reply and Edit

i donwloaded new email feature Forward, Reply and Edit. the whole process went fine. user has to send an email to one of his contacts to get this service activated. i did the same but i keep on getting a message 'Tunnel Failed'. dont know what that means. the email is sent but the application doesnt get activated.
can anyone advise me what the issue is and how to resolve it?
Thanks

I read reviews of this app at http://appworld.blackberry.com/webstore/content/2813/?countrycode=US&lang=en
and someone mentioned the smae issue you are having.
"When it works its great. Doesn't work when you have an attachment. Too often just gives you an email with the word 'null'.
I would check with the vendor.
I also referenced
http://crackberry.com/free-forward-reply-and-edit-application
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Issue with lock file in Oracle 10g app server - MDB not running

Hi,
I have Oracle 10g & MQ 6 on my laptop. I generated JNDI bindings for app server-MQ by giving ip address of my machine first. Then i changed it to "localhost" & generated new set of .bindings file.
With this new set i am able to send messages from my program to a queue. I also have an MDB which should listen to the same queue.
However now my mdb is not listening to the queue & i suspect it is due to host address change, - because each time i start the server, i see a lock file created "OracleASRouter_store.lock" - under j2ee\home\persistance. And below is the content of the same -
"O10.1.4.245:/C:/Program Files/Oracle/oc4j_extended_101330/j2ee/home/persistence/"
As per few suggestions on this site, I deleted this file & restated app server, deleted whole content of persistance folder, restarted app server. But each time i see this file created and also see the ip address in log.xml under j2ee\home\log\oc4j
Error message in this log.xml file is
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.265-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02009</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] Unexpected exception by JMS provider: javax.jms.MessageEOFException: initializeConnection.</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.jms.MessageEOFException: initializeConnection
     at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1075)
     at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1155)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:154)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:110)
     at com.evermind.server.jms.TCPJMSRemoteServer.<init>(TCPJMSRemoteServer.java:68)
     at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:122)
     at com.evermind.server.jms.EvermindQueueConnection.<init>(EvermindQueueConnection.java:70)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.unprivileged_createQueueConnection(EvermindQueueConnectionFactory.java:101)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.access$000(EvermindQueueConnectionFactory.java:44)
     at com.evermind.server.jms.EvermindQueueConnectionFactory$1.execute(EvermindQueueConnectionFactory.java:81)
     at com.evermind.server.jms.InContainerProxy.doSecureOp(InContainerProxy.java:157)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:78)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:69)
     at com.evermind.server.ejb.MessageDrivenConsumer.createNonXAResources(MessageDrivenConsumer.java:567)
     at com.evermind.server.ejb.MessageDrivenConsumer.initializeJMSResources(MessageDrivenConsumer.java:491)
     at com.evermind.server.ejb.MessageDrivenConsumer.processMessages(MessageDrivenConsumer.java:208)
     at com.evermind.server.ejb.MessageDrivenConsumer.run(MessageDrivenConsumer.java:169)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.EOFException
     at java.io.DataInputStream.readInt(DataInputStream.java:358)
     at com.evermind.server.jms.JMSRemoteServer.readCheck(JMSRemoteServer.java:678)
     at com.evermind.server.jms.JMSRemoteServer.readProtocol(JMSRemoteServer.java:696)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:134)
     ... 16 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.312-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02014</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] All message consumer threads have terminated due to provider errors, stopping MDB.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
And my MDB is NOT WORKING. Please let me know how to deal with this.
Your suggestions would be much appreciated.
Regard,
Chetan

Line # 127 is creating a new application object using ApplicationFactory.
ApplicationFactory aFactory =
(ApplicationFactory) FactoryFinder.getFactory(
FactoryFinder.APPLICATION_FACTORY);
application = aFactory.getApplication();
The only way that can throw a null pointer is when aFactory is NULL. I really doubt this case because, the same thing is doen in init() of FacesServlet. If it had failed there, the exception should have occured during server startup.
This leaves me more and more confused....I am desperate for some help now :((
Ramesh

Problem with ALV grid in edit mode

Hello, gurus!
I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell. And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
Thanks,
Mikhail

Hi Prabhu,
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
title_of_report = text-010.
SET TITLEBAR '0100' WITH title_of_report.
DATA: g_event_receiver TYPE REF TO lcl_event_handler.
IF z_custom_container IS INITIAL .
    CREATE OBJECT z_custom_container
      EXPORTING
        container_name = 'ALV_ZAC'.
    CREATE OBJECT alv_grid
      EXPORTING
        i_parent = z_custom_container.
    g_repid = sy-repid.
    gs_variant-report = g_repid.
    x_save = 'A'.
    PERFORM check_alv_grid_fields.
    ps_layout-cwidth_opt = 'X'.
    ps_layout-edit = 'X'.
    CALL METHOD alv_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = '1'.
*    CALL METHOD alv_grid->register_edit_event
*      EXPORTING
*        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    APPEND   s_list_rec   to it_list_rec.
    CALL METHOD alv_grid->set_table_for_first_display
      EXPORTING
        is_layout       = ps_layout
        is_variant      = gs_variant
        i_save          = x_save
      CHANGING
        it_fieldcatalog = pt_fieldcat
        it_outtab       = it_list_rec[].
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDIF.
FORM check_alv_grid_fields .
DATA: ls_fcat LIKE LINE OF pt_fieldcat.
REFRESH pt_fieldcat .
CLEAR: ps_layout, ls_fcat.
ls_fcat-fieldname = 'VBELN'.
ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table = 'LIPS'. " .
ls_fcat-outputlen = 9.
* ls_fcat-datatype   = 'CHAR'.
* ls_fcat-inttype    = 'C'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
ls_fcat-outputlen = 9.
* ls_fcat-f4availabl = 'X' .
* ls_fcat-datatype   = 'DATS'.
* ls_fcat-inttype    = 'D'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ENDFORM.                    " check_alv_grid_fields
FORM save_p .
CLEAR l_valid.
CALL METHOD alv_grid->check_changed_data
    IMPORTING
      e_valid = l_valid.
IF l_valid IS INITIAL.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel = text-i01
        txt1 = text-i02
        txt2 = text-i03
        txt3 = text-i04.
ELSE.
    i_dat_reg = zrumm_prr-cdprr.
    CLEAR is_temp_otc.
    freshit i_prrpus_fax.
    freshit i_list2_ot.
    LOOP AT it_list_rec INTO s_list_rec.
      MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
      i_list2_ot-fgrup = 'RECE'.
      i_list2_ot-prrnu = i_num_prr.
      APPEND i_list2_ot.
      MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
      APPEND i_prrpus_fax.
    ENDLOOP.
ENDIF.
Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM

Issues with locking up in edit mode

Similar Messages

Maybe you are looking for