Issues with mail when I have to change my yahoo password
Hello
I am having problems with mail on my mac.
1) For some time I have been unable to send photos by email from iphoto. When I try to do this it says 'the email server didn't recognise your username/password combination'. I'm not sure how to fix this.
2) I just had to change my yahoo account password today and now I am frequently getting a box up that says 'The SMTP server "stmp.mail.yahoo.com" rejected the password for user "my email address". Enter your password again or cancel.
It doesn't matter if I enter the new password or the old one - I am having this message keep popping up.
I would appreciate help with this.
Thanks
K
Maybe some help here:
http://support.apple.com/kb/TS3276
http://support.apple.com/kb/PH7290
http://support.apple.com/kb/PH7282
Similar Messages
-
How to reset yahoo mail on iPhone after changing your yahoo password?
Please check the link below, you might require an app specific password.....voila!!!
https://help.yahoo.com/kb/yahoo-account/SLN15241.html?impressions=true -
Until yesterday I was getting mail through my gmail acount on Apple Mail. I am now not getting any email. No settings have been changed, using a valid password. Any thoughts?
I found the following advice at: http://kb.mediatemple.net/questions/230/Common+issues+with+Apple+Mail#gs/not-rec eiving-email
Not receiving email
Once in a while, your Mail.app (sometimes referred to as "Apple Mail" or "Mac Mail"), stops receiving new mail. You may be able to verify that you are getting new mail via webmail, another email client or computer, or even via a mobile phone. When this happens, the fix is extraordinarily easy!
Here's how: From inside the Mail.app, click the Mailbox menu (see Figure 1):
Choose "take all accounts offline", and wait 10 seconds.
Choose "take all accounts online".
Figure 1: Follow these steps to refresh your Mail application.
You should begin seeing your new mail flow into your inbox.
It worked! -
I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr........... -
TS3276 I have issues with mail unexpectedly quitting, any suggestions?
Has anyone ever had issues with mail and/or Safari "unexpectedly quitting" repeatedly and the only thing that seems to temporarily fix it is to restart the computer?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Issues with iMessage when switching data carrier (wifi - cellular)
So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...
Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W. -
HT1338 Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.
Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.
Now I checked the materials that I got from AT&T Yahoo and
port 25 is used as the outgoing mail port, 110 for incoming.
This is for the POP type account provided by AT&T, not necessarily for an email account and SMTP server not provided by AT&T.
Sounds like AT&T blocks using an SMTP server that is outside of their network or not provided by AT&T on Port 25.
Try the following first.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't work, we will go to plan B. -
Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.
Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.
-
I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.
Hi
Can You
Go up to File Menu in iDVD - and here down to
Save as a DiskImage
If this works - You can burn Your DVD in another way via Disk Util tool
Yours Bengt W -
I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?
I am having the same issue but mine is with Netflix. And there are only 4 categories now on the main menue when there used to be 5. Something went crazy with ATV software.
-
HT2500 how do I use Mail when I have a second e-mail address?
How do I use Mail when I have a second e-mail address?
If you are running Snow Leopard:
Go under the Mail menu and choose Preferences, then choose the Accounts tab. Under the box on the left you will see a + , click on it. This will add a new account. Now you must put in all the information needed to access that account. -
How do I lock my mail when i have finished viewing so others can't access my mail
How do I lock my mail when I have finished viewing it so others using my ipad2 cant access it
The iPad is designed to be a single user device and there isno direct way of locking/hiding the Mail app, though there is this work-around https://discussions.apple.com/message/13127632#13127632
I don't know whether any of the third-party email apps have password protection within them, and you could also just use a browser (you can create homescreen shortcuts in Safari, so you could have a shortcut to your email account log-in screen). -
Mail crashes the moment i click on it. Anyone got any ideas as to why this happens?
mine does the same, the moment i open open up mail the pinwheel won't stop spinning, and i tried the utility disk repair but still the pinwheel spins upon starting the program-- any luck to fix this serious issue with Mail? thank you.
-
My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?
Apple is not here. Contact Apple to resolve your issue:
iTunes Support WorldWide
or
iTunes Support by eMail ww
Cheers,
GB
Maybe you are looking for
-
Activation of a trial version of Lightroom 4
I have purchased Lightroom 4 from Amazon. In the meantime I downloaded a trial version of the program from Adobe. Can I activate the downloaded trial version with the serial number from the purchased disc (haven't got it yet), or do I have to install
-
Just migrated my site from CF 4.5 to CFMX7 on a new server. Wow! MX7 fills the spool with our 7K+ emails in a flash! Used to take 20 minutes on CF 4.5! But MX7 is very slow on the outbound side! CF4.5 used to send 100 emails per spool cycle to the em
-
How to get current active tab (Detailitem)
Hello, i have searched everywhere and still can't find a solution for such simple task. I want to get the current active Detailitem value (af:showDetailitem) from a panelTabbed (using java class) Working on Jdeveloper 11.1.2.4.0, can you help me plea
-
HT1677 how do i get tabs in safari?
only got the mac book pro yesterday and cant seem to find the setting
-
Netbeans ide - can't see var's
I am running the netbeans IDE for the first time. I don't have any experience using IDE debuggers. I see the 'local variables' window, and there is a list of variables, but certain variables aren't listed. I'm not sure if this is because I'm within a