Issues with modfication to Standard Web Template

Hi all,
I have created a copy(ZADHOC) of 0ADHOC standard template without any modifications. When I try to execute a query on the WEB with this template (ZADHOC) on Internet Explorer (Version 7 or 8), it gives me completely junk data (something in Japanese or chinese) while with 0ADHOC it executes fine.
The tricky part is that the same query with the same template (ZADHOC) on Mozilla firefox executes successfully. I am not sure if its a bug or so but if anyone has faced this issue earlier or knows a resolution to the same please respond.
I tried changing the standard IE settings but to no avail, it stll gives me the same Chinese or japanese or Korean (whatever ... No offense meant to anyone) junk data (Please note that this data doesn't have any image embedded in it). Also, the URL produced has language set to "EN", so this as well cannot be the issue.
Request help on the same.
Regards,
Sree

Hi all,
The Issue has been resolved
The problem occured because of an HTML Meta tag which by default added Unicode as the character set. This had to be removed and saved. A preview after this yielded results correctly.
Thank you,
Sree

Similar Messages

Issue with filtering values in Web Template

I am facing a problem with filtering values in Web Template.
I have two queries based on two different data providers. One query is getting data from an Info set and the other from a Remote Cube. I have a single navigational block to filter values for both these queries but the change gets reflected only on the variable of one query. The other reflects no change and shows all the values irrespective of the filter condition.
I have tried the option of setting in the properties of the navigational block, affected data providers as both your data providers.But no effect.
Can a single navigational block be used to filter values on 2 queries which are built on different data providers? If yes, can someone please tell me how it is possible?
Kindly let me know how can I make the changes appear in both the queries?I am using SAP BI 3.5.
Thanks & Regards,
Suchitra

Hi Peng,
Frank also published a fix for 11g R1: http://www.oracle.com/technology/products/jdev/tips/fnimphius/rc_expand_menu_on_mouse_over.html
function showMenu(event){
var adfRichMenu = event.getSource();
adfRichMenu.getPeer().show(null,true);
}This should work.
Luc Bors

Hiding buttons in the standard web template based on roles

Hi,
In the standard web template, the requirement is to hide few buttons based on the authorization.
Can this be achieved by assigning the roles? If not what is the work around?
Regards
Narayana

Narayana,
Restricting the Buttons is not feasible thru Role restrictions, you need to work around with the WAD..
Action Events with Btn Clck.
Cheer's
HVR.

How to define a standard web template for a specific group of queries?

Hello experts,
I had to enhance the standard web template 0ADHOC and saved it as ZADHOC.
Then in SPRO t-code I defined it as the standard web template. The problem is: it started to be the standard web template for all the company queries.
Is there a way to define it as standard only for the queries of my project? Like adding some parameter in the web link only for my project queries?
Thanks in advance,
Helder

I have figured out how to slice it up myself, however it appears as though I have to do it all manually, drawing each box myself.
Yes, that's how it will have to be. There is no pertinent slicing in the PSD.
This will result in either ALLOT of work making sure that each box is perfectly aligned with the one before it, or uneven slices.
I am obviously doing something wrong.
Yes, you are not using guides. You know, those cute turqoise lines of which the document already has a few when opening it...
As for everything else - the template is simply rubbish. It's poorly organized and mostly unsuitable for building a website template right off the bat. Your work needs to start there by properly grouping items to mimic button states and then exporting them in two passes. And then there's things like this large dummy text etc. that simply don't make sense. Anyway, even if it sounds liek the same record over again: The biggest failure of any such work is to assume that PS could even spit out a working web page. All a web designer would use it for is to extract the graphical elements, but teh rest would stil lbe designed properly with standards compliance in mind in a web design app...
Mylenium

Activation of Standard Web Template

Can anybody tell me what I need to do to activate the standard web template?
I have defined 0ADHOC as my web template in RSCUSTV21, but none of the template contents are displayed in my web applications.

Hi Stuart,
The standard web template comes into play when you publish the query to the web either form the query designer or from the BEx Analyzer. At this time, the results are embedded in this standard template. IS this what you are trying to do? If you create your own web template in the WAD, then you need to start from the scratch and build it up with the web items you require. The standard web template is not used by default for any web applications that you may create.
Hope this helps...please post back if I have misunderstood your requirement.

To copy standard web template

Hi guys,
i need to modify a standard web template,
how do i copy as i was told not to touch
the original, so that it becomes my default,
help me out guys,
Thanks

Hi:
This workes for me:
In BW, run transaction:
SE38
COpy program 'RS_TEMPLATE_MAINTAIN'.
Execute the program.
In the next screen, you will see two drop-down boxes.
1) Technical Name of a Template
Here, select 0ADHOC
Again Execute
In the new screen, select the third Icon - Copy As.
Give New Name. Make sure its not there before, so gicve something like Z0ADHOC1, etc.
You are done.
Open WAS and select Open Web Template.
THere, you will either see the new one in History or do a seach with the name that you just gave.
Ram C.

What is the STANDARD Web Template in BI 7.0?

Hello guys,
Do you know what is the Standard Web Template in BI 7.0?
Today we only use Workbooks and the java is already installed.
Do we have to do some configuration in this Web template for our first execution?
Thank you,
Carlos Edaurdo

Hi,
0ANALYSIS_PATTERN is the standard Web template for the BI Queries when executed through Web.
We can copy this template to a Ztemplate and make the changes necessory based on project need and can be assigned
as default in Configuration settings .
Thanks,
Prakash

In which DB table standard Web Templates located and also HTML code

Hi gurus,
Please help me on locaton of Standard Web Templates in DB table and how can I see the HTML code in WAD. Thanks in advance and I will assign points.
Kaveri

Hi,
check the following link :
http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
1. open the web application designer
2. left side u'll be seeing the applications like Table, dropwdown box , check box etc
3.usually u drag and drop the application from left to right side--> once u dropped it u'll see 3 tabs at the bottom in that one of the Tab is HTML just click on it, it will lead u to the coding part.

Standard Web Template

We are using Portal and BI for Netweaver 2004s.
We want to create our own Web Application Template to be used for Ad-hoc analysis. We have created the template in the WAD and named it "ZZ_0ANALYSIS_PATTERN_T001".
We have entered this Template name into the IMG for "Set Standard Web Template" in the field for Ad-hoc Analysis(TCODE RSCUSTV27)
I expect that whenever I use the BEx Web Analyzer iView that this template would appear. Instead whenever I preview this iView the "0ANALYSIS_PATTERN" Web Application Template is displayed. I also have found that the "0ANALYSIS_PATTERN" Template is used if we click on "BEx Web Analyzer" from the Business Explorer Workset.
FYI - I have SAPALL on the BI system and in the Portal: bi_showcase, business_explorer_showcase,business_planning_showcase

Hi Heike,
Could you please guide me through how I'd go about changing the template used in iView ?
I'm getting an error: "<i>Web template error in specifications for the Web item report Parameter REPORT for the Report Web item in the Web template is empty or missing</i> " [and it's using 0REPORT_DEFAULT_TEMPLATE] when I execute a query from Query Designer... from what I'm understanding is that perhaps the iView template is using 0REPORT_DEFAULT_Template even though my SPRO setting is set to 0ANALYSIS_PATTERN for AdHoc.
Thank you!
Fionna

How to create transport request for standard web template

hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shalini

Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome

Set standard web template

Hello,
We are trying to change the standard web template to a web template we developed in the WAD.
In transaction RSCUSTV27 we put the WAD technical name in the field Ad hoc analysis (=TMPLID_BCAST) but when I run ad-hoc report I'm still getting the standard template (0analysis_pattern)
Please Advice,
Amir

Once you set the default template you need to restart the J2EE Engineen to get the effect.
thanks.
Wond

Standard web template doesn't work

Hi,
I am currently experiencing difficulties when executing query from query designer and using Java web from RSRT.
I get this error message The Web template "WEB_TEST" does not exist in the master system every time.
The web template "WEB_TEST" shouldn't exist in BI 7 because it belongs to BW 3.X and I don't know why I keep on getting this error message.
I have set the standard web template from RSCUSTV27 to 0ANALYSIS_PATTERN and even make the fields empty but I still get the error message.
If I use RSCUSTV21 and change the settings I can easily see the result.
Can someone tell me why I can still get this error message and where can I set my default web template because SPRO settings doesn't work
thanks

Hi,
Default template 0Analysis_pattern wasn't changed or edited and I have installed it from Business content again and changed the settings from RSCUSTV27.
I think the settings that points to default template in Java web has changed. and I don't know if this was done in portal side or BI.
I can easily change the template settings back and front in ABAP Web (RSCUSTV21) and it works just fine.change
I made a work around solution by copying 0Analysis_pattern and renaming it to "WEB_TEST" template and Java web works properly.
so settings is pointing to WEB_TEST template and this template doesn't exist in the new BI. Its in BW 3.X
thanks

Why a standard web template like 0ADHOC_CHART_LIB can't be opened?

Goto Metadata Repository, check local activated Web Template Name, 1st web template listed is called 0ADHOC_CHART_LIB, but why Web Application Designer can't open it?
Thanks

Hello,
0ADHOC_CHART_LIB is a Library Item therefore it is no real template and can´t be opened directly in WAD.
a Library Item is e.g. a chart item with some additional standard paramater which can be reused by library in another template.
Goto WAD create a new template there you can browse through library item. unfortunately i have no system here so i cannot say where the library function is in detail.
Regards Marcus

Why standard web template like 0ADHOC_CHART_LIB can't be opened?

Goto Metadata Repository, check local activated Web Template Name, 1st web template listed is called 0ADHOC_CHART_LIB, but why Web Application Designer can't open it?
Thanks

Hello,
0ADHOC_CHART_LIB is a Library Item therefore it is no real template and can´t be opened directly in WAD.
a Library Item is e.g. a chart item with some additional standard paramater which can be reused by library in another template.
Goto WAD create a new template there you can browse through library item. unfortunately i have no system here so i cannot say where the library function is in detail.
Regards Marcus

Issue with OSI PI WCF Web Service with wshttpbinding

Hi Experts,
System Details:
SAP MII 14 SP4
OSI PI Web Service: PITimeSeries
I am having issue when trying to call OSI PI web service using http post. it is returning status 0 when i am using exception handler in BLS.
Same web service works fine with basichttpbinding (SOAP 1.1) but with wshttpbinding (SOAP 1.2) it is giving error.
Following are Web config binding details for web service.
      <wsHttpBinding>
        <binding name="wsBinding_2011" sendTimeout="00:01:00" receiveTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
          <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" />
          <security mode="Message">
            <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" />
          </security>
        </binding>
      </wsHttpBinding>
I am not sure it could be the issue with passing windows credentials.
Did anybody consumed WCF web service with wshttpbinding with security mode as Message and clientCredentialType as Windows.
Also i was trying to pass MYSAPSSO2 SSO token to service in http post but first i am not sure if this is correct windows token and second which header property of service should be mapped and i am not sure that I am going into correct direction or not.
Please let me know what i am missing.
I have tried following other options and tools:
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as
                  The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per                                                                              my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Any help is appreciated.
Thanks & Regards,
Manoj Bilthare

Hi Sam,
The web service is valid following are details of testing on various tools.
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Please let me know if additional details required.
Thanks & Regards,
Manoj Bilthare

Issues with modfication to Standard Web Template

Similar Messages

Maybe you are looking for