Issues with Monitoring Azure services with SCOM 2012 R2
Hi,
I'm trying to setup monitoring of our Azure subscriptions in a new installation of Operations Manager 2012 R2 which is running in-house as it is also monitoring our internal services. I've used the guide below:
http://blogs.msdn.com/b/walterm/archive/2013/04/13/first-impressions-on-system-center-management-pack-for-windows-azure-fabric-preview-for-scom-2012-sp1.aspx
This has all worked OK and I've been able to add the subscription into OP Manager and it's found the cloud service, storage and VM's. However when I try to add the monitoring and I go to create this When I select the Add option in the Add Monitoring
Wizard and click the Search button to list the components (Cloud Service, Storage and VM's) nothing is found despite me having already selected the subscription.
Has anyone else experienced this or can offer any advice?
Many Thanks
Colin
Hi,
Which version of RDP client you are using for your client?
Does more user login at same period of time?
As you have commented that after sticking the user can’t able to login in RDCB server, here I can suggest you to check the setting of connection broker. Also you can check that you have place the proper location path of UPD while configuring in collection configuration
wizard. You can take a look at below article foe virtual desktop configuration.
Deploying Virtual Desktops with Windows Server 2012
Are you trying to use same UPD for different collection then also it might happens to occur your issue. The fact of UPD is User profile disks are for a single collection only. A user connecting to two different collections will have two separate profiles. If
you want to synchronize settings, refer to Microsoft User Experience Virtualization. Go through this article for more understanding related to UPD.
Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks.
Similar Messages
-
Issues with SCOM 2012 Agent on Red Hat 5 Server
We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
file I see:
WARNING: wsman: authentication failed for user scom2012
I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
Any ideas?We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
file I see:
WARNING: wsman: authentication failed for user scom2012
I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
Any ideas?
I've seen this on a few systems here when the agent has been upgraded but the old agent process does not die off. Just to rule it out, pick a node, make sure there are no instances of scxcimserver or scxcimprovagt and then start the agent and
see if the issue goes away. I've also seen wsman authentication failures related to the libssl issue that was fixed in yesterday's release. -
Dell server hardware component monitoring with scom 2012 R2.
hello ..
We have some dell poweredge r710 SFF 2X SIX CORE X5 SAS Servers ,I need to monitor its hardware components with scom2012 R2.I have installed os:windows server hyper-v server on this and windows server core OS management packs on scom and monitoring
working fine .next I want to know their is Latest Management pack available for this dell model server and what are hardware components can be monitored with scom 2012 R 2. I want to monitor Hardware failure such as Power failure ,cpu failure,disk
failure and NIC failure etc
Thanks
RichaHi,
Please refer to the User’s Guide of the DELL MP:
http://support.dell.com/support/edocs/software/smconect/msscom/40/en/ug/pdf/Dell_Server_Management_Pack_Suite_v4.0_UG.pdf
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Meanwhile, considering this is related to DELL products, if you need more information or further investigation, please also contact DELL support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
OEM integration with SCOM 2012
Hi,
Can anyone help me out on the topic- OEM integration with SCOM 2012.Are you refer to this document
Oracle® Enterprise Manager Installation and Configuration Guide for Microsoft System Center Operations Manager Connector
http://docs.oracle.com/cd/E24628_01/install.121/e28572.pdf
Roger -
Is there way to Monitor Live camera from SCOM 2012 R2
Is there way to Monitor Live camera from SCOM 2012 R2 ?
Thanks
Raja R
Raja RDepends what it is that you want to monitor?
If it's an IP camera that supports SNMP, you can monitor multiple components, depending on the manufacturer (e.g. # images captures, uptime in hours, ...).
If it doesn't support SNMP, you can monitor it through ICMP (ping). Then it's only possible to monitor the state of the device (up/down) depending on wether scom receives a ping reply or not.
If it's a coaxial camera or something else, not connected to a network, it's not possible to monitor the camera itself. Might be possible to monitor the computer/DVR that records the images. -
Windows client monitoring Management packs for SCOM 2012
Hello All,
Please provide the link for windows client monitor management pack for SCOM 2012 SP1 ,if there is any available .
I have got one link for this but it is for SCOM 2007 .
Regards
Richa KMhttp://www.microsoft.com/en-us/download/details.aspx?id=15700
Yes you can download from this link and you can import it in scom 2012 sp1.although it is for scom 2007 -
Most straight forward approach for monitoring scheduled tasks in SCOM 2012
Hi,
This one should be easy (?): looking for the most straight forward approach for monitoring scheduled tasks in SCOM 2012.
Best regards
Thanks in advance, Best Regards<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="MicrosoftWindowsServerLibrary6063215">
<ID>Microsoft.Windows.Server.Library</ID>
<Version>6.0.7061.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
You also need to add/copy the reference for the Scheduled Tasks MP you are using for other OSs. The above is from the MP for Windows 2012 Scheduled Tasks. Most of the existing MPs available for scheduled tasks already cover Windows 2003/2008 R2, I just extended
support for 2012. -
Monitoring services on MSMQ cluster with SCOM 2012
Hello guys,
I'm looking a way that SCOM 2012 is able to monitor several services installed on MSMQ cluster. I think it's possible that SCOM 2012 can generate alert through the message queuing service associated to these services but this is an indirect monitoring. I
would want that SCOM generates the alert for the specific service in problem.
Any suggestion?
Thank you very much.Hi,
There is a management pack for Message Queuing.
You can download it from http://www.microsoft.com/en-us/download/details.aspx?id=36775
Hope it help's
Greetings,
Roel Knippen
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Exchange 2010 and 2013 Monitoring with SCOM 2012
HI all,
I have exchange 2013 and 2010 in my environment , Iwant monitor both in SCOM 2012,
Can you all please tell can i implement 2013 monitorinng first later can i go to 2010 Monitoring, Please advise in that supported or do i need to go with exchange 2010 monitoring firstThere are no dependencies on the 2010 MP so you should be good to go, see the following:
-
EM 12C Integration with SCOM 2012
Hi
Has anyone integrated EM12C ( running on Solaris Sparc ) with MS SCOM 2012 ? Just looking for any hints / tips /issues ... etc ...
Any thoughts appreciated.
Regards
RobIf the integration is along the lines of forwarding events from Enterprise Manager 12c to SCOM, then we are currently finalizing an event connector for SCOM 2012. It will enable the sending of events from Enterprise Manager to SCOM.
Regards,
Ana -
SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching
Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers. When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task". The task disappears and there is no history to view.
Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.SCCM should use the following SCOM SDK to do that.
http://msdn.microsoft.com/en-us/library/bb437532.aspx
That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
reflected in the OpsMgr console).
Jason | http://blog.configmgrftw.com -
Measurement Computing USB-DIO96H driver issue with Labview 2012 SP1 on Windows 7 x64
Is anyone else having issues with measuremetn Computing's USB-DIO96H driver in Labview 2012 SP1. It throws warnings in Labview when loaded that are unresolvable as you can't save to the DLL driver file. Also it regularily crashes Labview randomly. I am not impressed with their driver. Anyone have any suggestion other than replacing with NI-DAQ solution, which I am working on?
I've taken a look and I don't see any drivers available for that device on ni.com. There are two potential workarounds that would both involve building your own driver:
1. Write a LabVIEW application that calls functions on the DLL you downloaded from Measurements Group
2. Write a LabVIEW application that addresses the device using NI-VISA and serial communication.
Some resources if you choose to go down that path:
http://www.ni.com/devzone/idnet/development.htm
http://www.ni.com/white-paper/3271/en/
http://www.ni.com/white-paper/3009/en/
Hope this helps!
Rob B
FlexRIO Product Manager -
Unattend.xml parsing/merging issue with SCVMM 2012 R2
Hi all
I have a problem with a new install of SCVMM 2012 R2. I have created templates for 2008 R2, 2012 and 2012 R2. I have an issue with the unattend.xml losing some of its configuration when the 2012 and 2012 R2 templates are built, this issue however doesn't
occur on a 2008 R2 template build.
I have generated unattend.xml files for all 3 OS's using System Image Manager in the latest AIK using the original install.wim from each OS media.
In the unattend.xml file I have specified language settings, and a few other bits but the issue I have is when I configure autologon with local admin and password. I specify a logon count of 1, I also specify a GUIRunOnce command in SCVMM and not the answerfile.
The problem is the resulting merged unattend.xml has a logon count of 999 and no GUIRunOnce command. I have tried different variations where I specify GUIRunOnce in the xml and not SCVMM, applying the autologon to the Template or Guest OS profile and
all end with the resulting xml with logon count of 999 and no GUIRunOnce. If I remove the autologon part then GUIRunOnce gets parsed and works correctly.
As mentioned this only happens with Server 2012 and 2012 R2, 2008 R2 works correctly.
Any ideas?Hi Kevin
I am struggling with the same thing during bare metal installs of Hyper-V hosts. In my case I have managed to narrow it down to the language settings in the oobe pass. If I include them, parsing of the unattend file halts (without an explicit error anywhere)
and the host fails to join the domain. Could you try to leave out the language settings in oobe pass and see if it then completes as expected? Would be interesting to see if it actually is the same issue with a slightly different flavour :)
EDIT: Got a bit further now with the new release of WS2012 R2. All the testing I've done has been with the 05182 build. Stumbled across KB2913316 which stated that a new build (31419) was released december 11th. Allthough the KB does not directly apply to our
issue I thought I'd give it a go, so I went about building a new vhdx-image. Low and behold - the first test went smoothly applying all the settings in the unattend file! I'm going to continue testing to make sure the successful run wasn't just a fluke. -
Windows 2012 upgrade plan to R2 hosted with SCOM 2012 SP1
Dear Experts,
Currently we are hosting SCOM 2012 SP1 on Windows 2012 Operating System and the Server team plan to upgrade Windows server OS 2012 to Windows OS 2012 R2.
So, Is there any Potential road blocks and things to take care for SCOM 2012 SP1 if we want to upgrade the Windows 2012 R2 OS.
Thanks,
Saravana
Saravana RajaHi,
I have seen this a couple of times without any issues.
Just make sure you backup all SCOM related (databases if local, management packs etc).
www.coretech.dk - blog.coretech.dk -
How to setup Tiering with SCOM 2012 class libraries?
Hi All,
I've two SCOM servers installed in two different machines and SCOM will have some alerts. I want to connect the two so that one acts as top tier and other one as lower tier. The top tier will show all the alerts from the lower tier in
the connected alerts. From there I'm passing the alerts to external system for processing. I want to establish the tiering programmatically using the SCOM 2012 API. I know of method
TieringManagement.AddTier Method (String, ManagementGroupConnectionSettings, SecureData, Boolean)
Help me how can I achieve this by using the above method.
Thanks in advance.
viRaTo configure method TieringManagement.AddTier Method, you can refer to below links
http://msdn.microsoft.com/en-us/library/hh332072.aspx
http://msdn.microsoft.com/en-us/library/hh350608.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".
Maybe you are looking for
-
firefox is working but does not operate. Other browsers work so its an issue with the upgrade. No error message. what do I do?
-
Ship to party and Sold to Party
SD Gurus, I am new to SD, I have a new customer, that will various ship to party. What is the process to set up ship to parties. I know I have to set-up custmer via XD01, then partner functions select the ship to party? Where do i create the ship to
-
How to do i get my macbook to thunderbolt to hdmi?
I am lucky enough to own a new MCB. So how do I get the thunderbolt to HDMI?
-
Item xref api or interface?
hi, does anybody know whether there is an api or interface for item cross reference conversion (supplier cross reference, not customer) in R12? thanks..
-
I have two Adobe ID's. Can they be merged?
I'm not sure how this happened. There's only one of me, but I have two Adobe ID's (linked to two different email addresses). Can they be merged so that I have only one ID and no confusion for me or for Adobe?