Issues with MS-7211 (PM8M3-V) and the JPW1 connector

Hi all,
I have been recently getting problems with booting up my computer. The Windows flash logo will stall and boot will not continue. Also, at times the boot-up gets stuck in a "loop" where the system will just cycle through boot-up over and over again. I was able to finally get the system to boot via Safe mode and backup all data. I was then planning to reload Windows XP (SP3) when the computer just shut down. Subsequent attempts to power-up were not successful - except when the JPW1 connection was not made. Any ideas? Bad MB?
I have the following configuration (As reported by Everest tool):
Computer:
Operating System Microsoft Windows XP Home Edition
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name HOME-E9798F52E2
User Name Kevin
Motherboard:
CPU Type Intel Pentium 4, 3400 MHz
Motherboard Name Unknown
Motherboard Chipset VIA P4M800 Pro
System Memory 448 MB
BIOS Type Award (06/09/06)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter VIA/S3 UniChrome Pro
3D Accelerator VIA/S3 UniChrome Pro
Multimedia:
Audio Adapter BrookTree Bt878 Video Capture Device - Audio Section
Audio Adapter VIA AC'97 Enhanced Audio Controller
Storage:
IDE Controller Standard Dual Channel PCI IDE Controller
IDE Controller VIA Bus Master IDE Controller
Disk Drive WDC WD2000BB-00GUC0 (180 GB, IDE)
Disk Drive AFT SD PRO-9XP USB Device
Disk Drive AFT MS PRO-9XP USB Device
Disk Drive AFT SM PRO-9XP USB Device
Disk Drive AFT CF PRO-9XP USB Device
Optical Drive LITE-ON DVDRW SOHW-1693S (DVD+R9:4x, DVD-R9:4x, DVD+RW:16x/8x, DVD-RW:16x/6x, DVD-ROM:16x, CD:48x/24x/48x DVD+RW/DVD-RW)
Optical Drive LITE-ON LTR-52327S (52x/32x/52x CD-RW)
SMART Hard Disks Status OK
Partitions:
C: (NTFS) 184676 MB (119768 MB free)
Input:
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse HID-compliant mouse
Peripherals:
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB2 Controller VIA USB 2.0 Enhanced Host Controller
USB Device USB Human Interface Device
USB Device USB Mass Storage Device
Many, many thanks in advance.
RB

Read >>Posting Guide<<
Also re-seat the CPU and apply new thermal paste and check cooling system

Similar Messages

Has anyone had any issue with opening a new tab and the address bar not connecting to websites in 33.1.1?

I think ever since we moved to v33, I've been having an irritating issue that whenever I open a new tab that isn't connected to a website yet and try to enter a website address, it won't connect to ANY website. Doesn't matter if I hit Enter to try to make it go, doesn't matter if I click the right-pointing arrow button to make it go, doesn't work. I can go into a tab already connected to a website, type in a new website there and it'll create a new tab and take me to the new website, but not if I use new tab button.
Anyone else had this issue? Any fixes?

Sorry, that didn't help as I'm able to connect to websites, just not in a particular way.
For instance, I am able to type in and connect to websites IF the tab is already in use with a website (i.e. if I were to type "yahoo.com" in the address bar of this tab FF would open a new tab and take me to yahoo.com) but not when it is a completely new tab.

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

HT4623 Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??

Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7?? Installed ios7 this morning. Tried to use one of my photos from camera roll as background for lock screen and I can't scale the photo to fit the screen. Never had a problem before and now when I pinch the photo to get it to the right size of the screen, it won't stay that way. The photo is enlarged way beyond the screen size so it doesn't look right. Does anyone know how to fix this?

Hello, cliffiapp4.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

TS3274 my IPad has one half of the screen with vertical multi colored stripes and the other half is normal. Has anyone experienced this and has a solution?

My IPad has one half of the screen with vertical multi colored stripes and the other half is normal. Has anyone had this problem and if so is there a solution?

You could have a hardware issue, but try this and see if it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

An error has been detected with a required application library and the product cannot continue. Plea

I am getting the following error each time I open Adobe Acrobat 7.0 Professional...
"An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have tried uninstalling and then reinstalling the program. It didn't help, got the same error shortly after opening the program.
What is strange is that the problem just suddenly appeared therefore, I believe that it may have been malware related causing this problem. And I have had this program and have been using it without any problems now for over 3 years.
It appears that a vital part of the program is being blocked.
Can anyone please help and offer a detailed solution to this problem? Maybe someone has already encountered it.
Thank you!
-Dan Sacapano

Anoop,
Upon re-reading that information, I am curious as to why your believe that this will solve my issue. That is not related to my error message: "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have not received any such message as the one seen on that page.
Please explain why I wouldn't have gotten that partcular message and instead got the one I quoted above?
Thank you,
-Dan

I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe or Microsoft). What can I do to use these fonts?

I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe or Microsoft). What can I do to use these fonts?
I actually created these fonts with fontagrapher in 1998 and have been using them regularly ever since and now they are not available in InDesign. I really need to use them.

I found a page on Adobe, Troubleshoot fonts | Mac OS X
On PostScript type 1 fonts you need to copy/move the fonts to the correct font folder because Font Book doesn't copy them into the folder. Select the fonts double-click the fonts and Find in the font Book app and validate.
The correct font folder depends how you are set up. I am by myself so my font folder was MyHarddrive/Library/Fonts. I was using Suitcas fusion and the fonts are located in a different folder.
Most of the fonts have worked. Go to
http://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
This should help. Good Luck.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it. I'm on Mavericks 10.9.5.

one obstacle, quickly removed. thank you.
nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

Youtube not opening in Safari browser. However it works with google browser. There is a red arrow coming, with https in you tube, and the page just does not open. help required.

youtube not opening in Safari browser. However it works with google browser. There is a red arrow coming, with https in you tube, and the page just does not open. help required.
It seems I have done some mistake when you tube was open, and i stopped one site to delete!
From then on it is not working.
Any solutions?
GV Joshi

Hi gajanan vasant!
I have a couple of articles for you that should help you troubleshoot your issue with Safari. First, you may want to try a reset on Safari by following the procedure listed in this article:
Safari 5.1 (OS X Lion): Reset Safari
http://support.apple.com/kb/PH5043
If you are still having issues after resetting Safari, you may want to check out this article about third-party add-ons in Safari:
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/TS3230
Thanks for using the Apple Support Communities!
Regards,
Braden

Is Mavericks compatible with Final Cut Pro 7 and the rest of Studio 3?

I still use FCP 7 and limp along, but recent updates of FCP X are encouraging. Until I'm ready to take the plunge, would someone tell me if there's been any feedback re Mavericks' compatibility with Final Cut Pro 7 and the other software in the Studio 3 Suite - especially Compressor and DVD Studio Pro? I'd love to dl Mavericks but not if there are compatibility issues.
Thanks ~

Going from SL to Lion is not advised. Start clean.
Install Lion. Run updates. Install FCS. Run updates.
x

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Issues with MS-7211 (PM8M3-V) and the JPW1 connector

Similar Messages

Maybe you are looking for