Issues with N8 ,,,,, plz Help

My N8 Used to hang a Little in the start , I Updated my Phone's Firmware, Now it seems Fine .
But one Major Problem i am Facing is The when I try to Unlock my Phone the First time i slide the Unlock key , There comes a Black screen , Then i slide it again , Then the screen saver appears , And the Third time it Gets Unlocked ,
Y not the First time .. ?
to Unlock my Phone i have to i have to Slide it 3 Times .. This Is frustrating.
Second Issue i am Facing is That laying Idel for some time and if there is a call , I can Only Hear the Sound But the screen is BLACK ..
Third one is that some times , when i zoom some Pics the screen goes Black ..
I am so **bleep** , Dont know wat to do ... ?

i have only one app , That is Opera, dats it .
and call Image his already set to theme Image ..
it is still the same ,
I have also restored the factory settings..
it Becomes fine for like 1-3 Hours, But then Again there is the same Unlocking prob , and the incoming call Prob..
I am so Confused..
Dun know wat to Do ...

Similar Messages

Issue with tables :( Plz Help!

Hey all!
Never posted before on this forum and pretty new with
dreamweaver. So I'm having the strangest issue with dreamweaver
tables. I bought a template that I'm modifying by my self which
isnt all that hard haha. But Here's what I ran into. Whenever I put
one table and then another one under it and another one under it
and I insert txt or pics in there and save it, after I upload it
and preview it, I can only see the info from the first table.
Everything else under it, wont show up.
So no matter where and on what page I do it from that
template, if I put more than 1 table down, it'll only show the info
from the first and top table and everything else in other tables
under it, wont show up at all (after I upload it) even thou it
looks good on dreamweaver itself :(
Is there an option to enable or disable something? Plz help,
thank you all!

"Unknown7" <[email protected]> wrote:
> So no matter where and on what page I do it from that
template, if I put more
>than 1 table down, it'll only show the info from the
first and top table and
>everything else in other tables under it, wont show up at
all :(
>
> Is there an option to enable or disable something? Plz
help, thank you all!
The bad news is that if you want to do anything remotely
complicated with
Dreamweaver you will have to learn a fair amount about HTML.
I would virtually
guarantee that when you put your new table in something is
going wrong so that
one or other table is not being defined correctly.
As you are modifying someone else's template there is
virtually no way to find
out what is happening other than to examine the HTML. It is
unlikely that
fiddling with any Dreamweaver settings will make any
difference.
Every table should start with something like:
<table width="100%" border="0" cellspacing="0"
cellpadding="5"
bgcolor="#e0e0ff">
<tr align="center" valign="middle">
<td width="9%"><a href="#Bottom">
and end with:
</td>
</tr>
</table>
You can have more or less as many columns as you like in a
table, (<td> ...
</td>
And more or less as many rows ( <tr><td> ...
</td></tr>) as you like, but
unless you get up to special tricks you should have the same
number of columns
in every row. You can put anything you like -- images, more
tables, whatever --
inside a cell e.g.:
<td> image, blah, table </td>,
but you mustn't put any content anywhere else, and every
opening definition
(<table>, <tr>, <td> must have a matching
closing definition in the correct
order.
You can nest tables more or less indefinitely, but
Dreamweaver Design View
sometimes blows its top if you go more than three deep.
HTML usually doesn't produce any error messages, but the
effect of omitting any
of the steps in building a page is quite unpredictable.
Sometimes a major error
will not produce any visible effect, but on other occasions a
minor error will
send the page completely haywire.
You may care to have a look at:
http://www.corybas.com/Technical/Wrapping.htm
This has a series of demonstration pages illustrating what
happens when you try
to display increasingly complicated page layouts on narrow
screens.
Once you have learnt to interpret HTML, you can often learn a
lot by inspecting
the source code for the page (in IE click view, then Source).
This works with
anybody's page, so you can look at the source code for my
pages if you wish.
Clancy

USB 2.0 issue with sleep mode--help!

hey there,
so i've searched this forum's board and found that it seems quite a few people have had issues with USB 2.0 and sleep mode on the mac. most of what i read, however, comes from people not being able to put the computer to sleep once new USB 2.0 cards or devices are installed. that is not the problemm I seem to be having, but is this:
I recently purchased a Belkin USB 2.0 PCI card, and installed it on my MAC G4 tower. It seemed to work ok for a little while, but then i noticed that AFTER i put the computer to sleep, when it 'awakens' from slumber, it no longer reads the USB devices. if the device was plugged in prior to sleep mode, it sometimes reads ok. but if I try and plug in a new USB device, such as an iPod or flash drive, no dice. it doesn't mount on the Mac.
I called Belkin tech support, and they were very helpful, but told me that the macs have had issues powering the USB PCI card once the computer is in sleep mode. they even directed me to an apple support page that has downloads that seem to address this, but they're for 10.0-10.0.4. I don't want to download that onto my mac (10.3.9) cuz im worried it might screw something up on my OS.
I would LOVE a download link for a software updater for this if someone knows where it is, otherwise, I may have to return this thing to Belkin and go with a more mac-friendly brand. so im open to that possibility, too.
any help would be GREATLY appreciated!!
cheers,
the quid pro
Power Mac G4 Mac OS X (10.3.9) Dual 1Ghz, 1.5 GB SDRAM

I would either complain to Belkin for a fix if there is one or return the card and try a different one. You should not have the problem, but Belkin USB hubs and cards appear to have more problems like yours than other manufacturers' products.
You might try Sonnet's Tango FW400/USB 2.0 multi-card, for example, or Firewire Direct's 6-port FW800/USB 2.0 card.
You may also want to check this page for some user reports on related products.

Function group issue in upgrade plz help very urgent

hi gurus,
plz help me
in a big trouble.
deadline is today.
when i activated the function group i found this error in an include
LSVARCLS
and when i clicked to this field it took me to another include
LSVARTOP
here i found
data: f4_params type onf4_event_parameters_type.
FYI:
types: begin of onf4_event_parameters_type.
types: c_fieldname     type lvc_fname.
types: cs_row_no       type lvc_s_roid.
types: cr_event_data   type ref to cl_alv_event_data.
types: ct_bad_cells    type lvc_t_modi.
types: c_display       type char01.
types: end of onf4_event_parameters_type.
data: f4_params type onf4_event_parameters_type.
error is :
Field "F4_PARAMS-C_FIELDNAME" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement . . . . . . . . . .
thanks in advance

FUNCTION-POOL ZVAR MESSAGE-ID DB.
TABLES:
        TADIR,                         " Entwicklungsklasse
        TRDIR,                         " Reportcatalog
        LDBD,                          " logical databases
        VARID,                         " variant properties
        RSVAVA,                        " Variable data in
                                       " variants( sy-datum)
        RSVAR,                         " new RALDB structure
        RSVARDESC,                     " Report, Variante, Dynnr
        VARIT,                         " variants texts
        VARIS,                         " screennr per variant
        DD23T,                         "
        DFIES,                         "DD-Schnittstelle, get_field
        TPARAT,                        "Texte zu Memory-Ids
        TVARUVN, "#EC NEEDED
        SSCRFIELDS,
        t000.
DATA CHOOSE like sy-ucomm value 'PICK'.
DATA G_STATUS like sy-pfkey.
*Includes für Icons
INCLUDE .
Include für Symbole
INCLUDE .
*Equates für SSCR
INCLUDE RSDBCOM2.
*Typen für dynamische Selektionen, verwendet bei RS_REFRESH_...DYNAMICAL
TYPE-POOLS: RSDS, SYLDB, sydb0.
data: GS_TOOLBAR           TYPE STB_BUTTON.
include lsvarcls.
Key um unnoetige Datenbankzugriffe zu vermeiden
DATA: BEGIN OF CHECK_KEY,
      REPORT LIKE RSVAR-REPORT,
      VARIANT LIKE RSVAR-VARIANT.
DATA: END OF CHECK_KEY.
key für get_description
*DATA: old_key LIKE check_key.
CATALOG OF VARIANTS, OLD STRUCTURE. WILL BE DELETED BY FIRST
CALL OF VARIANTS OUT OF FUNCTIONPOOL SVAR.
INFORMATION WILL BE TRANSFERED TO VARID AND VARIT.
DATA: VARCAT LIKE RSVARC OCCURS 20 WITH HEADER LINE.
TEXT (=> VARIT)
DATA: VARCATT LIKE RVART OCCURS 20 WITH HEADER LINE.
SAVE INFORMATION ABOUT VARIANTS
DATA: BEGIN OF SAVEINFO OCCURS 20,
         NAME      LIKE RVARI-NAME,
         NUMB      LIKE RVARI-NUMB,
         PROTECTED LIKE RVARI-PROTECTED,
         FIELDTEXT LIKE RSVAR-FIELDTEXT,
         KIND      LIKE RVARI-KIND,
         TYPE      LIKE RVARI-TYPE,
         VTYPE     LIKE RVARI-VTYPE,
         VNAME     LIKE RVARI-VNAME,
       appendage I= Matchcode, C=Checkbox etc
         APPENDAGE LIKE RSVAR-INVISIBLE,
         VARIS(1),                     " TVARV, FUBAU
       N= Ausgeblendet von Report,X ausgeblendet in Variante
         INVISIBLE,
         USER,
         MEMORYID LIKE RSSCR-SPAGPA,
       nur auf einem Bild vorhanden
         GLOBAL,
         NO_IMPORT,
         SPAGPA,
         NOINTERVALS,
         OBLIGATORY LIKE RSVAR-OBLIGATORY,
         RADIO,
     END OF SAVEINFO.
DATA: BEGIN OF SAVEINFO_DYN OCCURS 10,
        TABLENAME LIKE RSDSTABS-PRIM_TAB,
        FIELDNAME LIKE RSDSTABS-PRIM_FNAME,
        FIELDTEXT LIKE RSVAR-FIELDTEXT,
        TYPE      LIKE RVARI-TYPE,
        VTYPE     LIKE RVARI-VTYPE,
        VNAME     LIKE RVARI-VNAME,
        VARIS(1),
        PROTECTED LIKE RVARI-PROTECTED,
        GLOBAL(1).
DATA: END   OF SAVEINFO_DYN.
data: saveinfo_sav like saveinfo occurs 0 with header line.
data: saveinfo_dyn_sav like saveinfo_dyn occurs 0 with header line.
key for import of variants from VARI
DATA: BEGIN OF $RKEY,
        REPORT LIKE RSVAR-REPORT,
        VARIANT LIKE RSVAR-VARIANT,
      END OF   $RKEY.
vari
DATA: L_VARI LIKE RVARI OCCURS 20 WITH HEADER LINE.
%_SSCR
DATA SELCTAB LIKE RSSCR OCCURS 20 WITH HEADER LINE.
DATA GLOB_SUBMODE(2).
DATA LOC_SUBMODE(2).
screenfields
DATA: XCODE(4).
DATA: FCODE(4)      TYPE C,
      FUNC(4)       TYPE C.
DATA: BEGIN OF INFO OCCURS 20,
        FLAG,
        OLENGTH TYPE X,
        LINE LIKE RSVAR-INFOLINE,
      END OF INFO.
DATA: VALUTAB LIKE RSPARAMSL OCCURS 40 WITH HEADER LINE.
Zur allgemeinen Verwendung
FIELD-SYMBOLS: .
DATA ILLEGAL_CHAR.                     " Wrong sign in variant
copy
DATA: VARIANT2 LIKE RSVAR-VARIANT,
      VARIANT1 LIKE RSVAR-VARIANT.
*list of parameters and select-options, screenobjects
DATA: L_SELOP LIKE VANZ OCCURS 20 WITH HEADER LINE.
DATA: L_SELOP_NONV LIKE VANZ OCCURS 20 WITH HEADER LINE."nonv = non visi
DATA: L_PARAMS LIKE VANZ OCCURS 20 WITH HEADER LINE.
DATA: L_PARAMS_NONV LIKE VANZ OCCURS 20 WITH HEADER LINE.
DATA: SCREENOBJECTS LIKE VANZ OCCURS 20 WITH HEADER LINE.
list of all variants concerning one report
DATA: BEGIN OF VARI_LIST OCCURS 40,
            MARKFIELD LIKE RSVAR-MARKFIELD,
            VARIANT   LIKE RSVAR-VARIANT,
            TEXT      LIKE RVART-VTEXT,
            ENAME     LIKE RSVARC-ENAME,
            AENAME    LIKE RSVARC-AENAME,
            PROTECTED LIKE RSVARC-PROTECTED,
            ENVIRONMT LIKE RSVARC-ENVIRONMT,
            XFLAG1    LIKE VARID-XFLAG1.
DATA: END OF VARI_LIST.
*Variablen für das Blättern auf den Dynpros 1303 und 306.
DATA: VARI_LIST_SCROLL LIKE SY-STEPL VALUE '1'.
DATA: SAVE_OKCODE(4).
table for Dynpro 306 (delete variants)
DATA: BEGIN OF H_VARILIST OCCURS 30,
            MARKFIELD LIKE RSVAR-MARKFIELD,
            FLAG1     LIKE RSVAR-FLAG1,
            FLAG2     LIKE RSVAR-FLAG2,
            FLAG3     LIKE RSVAR-FLAG3,
            VARIANT LIKE RSVAR-VARIANT.
DATA: END OF H_VARILIST.
CONSTANTS: C_PDLIST_WIDTH TYPE I VALUE '24',
           C_VARILIST     TYPE I VALUE '10'.
DATA: CATTOP LIKE SY-TABIX VALUE '3'. "lines top-of-page in CATALOG.
*data: listtop like sy-tabix value '3'. "lines top-of-page in Delete
"vari
DATA: PRINT_ALL_VAR.                   "alle Varianten drucken
DATA: PRINT_CAT_VAR.                   "Katalog drucken
Systemumgebung
DATA ENVIRONMENT.                      " S: SAP, C: Customer
Dynpro 320
DATA : TEXT0(59).
*Tables and fields for fitting variants
*table of variants which must be fitted
DATA: BEGIN OF FIT_VAR OCCURS 50,
       VARIANT LIKE RSVAR-VARIANT,
       FLAG(1).                        " flag = 'X' => Variante can't be
DATA: END OF FIT_VAR.                  "fitted.
DATA: BEGIN OF SINGLE_OPTIONS OCCURS 8,
       OPTION(2),
        TEXT(18).
DATA: END OF SINGLE_OPTIONS.
variants which contain variables
internal table, per line select-options and parameters which
use variables
DATA: BEGIN OF VARIVAR OCCURS 20,
        SELNAME     LIKE RSSCR-NAME,
        SELTEXT     LIKE RSVAR-FIELDTEXT,
        KIND        LIKE RVARI-KIND,
        TYPE        LIKE RVARI-TYPE,
        VTYPE       LIKE RSVAR-VTYPE,
        VTEXT       LIKE RSVAVA-VTEXT,
        FB,
        TVARV,
        VNAME       LIKE RSVAR-VNAME,
        OPTION      LIKE RSVAR-OPTION,
        SIGN(1),
        INFO_TABIX LIKE SY-TABIX,
        DATES_TABIX LIKE SY-TABIX,
        USER,
        MEMORYID LIKE TPARA-PARAMID,
     END   OF VARIVAR.
DATA: BEGIN OF VARIVAR_DYN OCCURS 20,
        TABLENAME LIKE RSDSTABS-PRIM_TAB,
        FIELDNAME   LIKE RSDSTABS-PRIM_FNAME,
        KIND        LIKE RVARI-KIND,
        TYPE        LIKE RVARI-TYPE,
        VTYPE       LIKE RSVAR-VTYPE,
        VTEXT       LIKE RSVAVA-VTEXT,
        FB,
        TVARV,
        VNAME       LIKE RSVAR-VNAME,
        OPTION      LIKE RSVAR-OPTION,
        SIGN(1),
        INFO_TABIX LIKE SY-TABIX,
        DATES_TABIX LIKE SY-TABIX,
     END   OF VARIVAR_DYN.
DATA: VARIDATE_S LIKE RSVARIVAR OCCURS 20 WITH HEADER LINE.
Tabelle der möglichen Datumsberechnungen für Variablen in Varianten
Parameter
DATA: VARIDATE_P LIKE RSVARIVAR OCCURS 20 WITH HEADER LINE.
table of possible TVARV-variables (parameters)
DATA: TVARV_P LIKE TVARV OCCURS 20 WITH HEADER LINE.
table of possible TVARV-variables (select-options)
DATA: TVARV_S LIKE TVARV OCCURS 20 WITH HEADER LINE.
description of fields VARIDATES
DATA: FIDESC_DATES LIKE RSVBFIDESC OCCURS 5 WITH HEADER LINE.
description of fields TVARV
DATA: FIDESC_TVARV LIKE RSVBFIDESC OCCURS 5 WITH HEADER LINE.
description of fields OPTION
DATA: FIDESC_OPTION LIKE RSVBFIDESC OCCURS 5 WITH HEADER LINE.
description of fields OPTION
Feldtabelle für DYNP_VALUES_READ/UPDATE
DATA DYNPFIELDS LIKE DYNPREAD OCCURS 50 WITH HEADER LINE.
*desctab
DATA: DESCTAB LIKE RSBREPI OCCURS 20 WITH HEADER LINE.
*Hilfsfelder für Übergabeparameter
DATA:G_SUBRC LIKE SY-SUBRC,
     L_RC LIKE SY-SUBRC.
*Hilfsfelder für Sperren
DATA: G_ENQSUB LIKE SY-SUBRC.
*Hilfsfeld für mandantenabhängiges Löschen von Varianten
DATA: DEL_ALL_VAR. "=X alle Mandanten, =' ' nur aktueller Mandant
select variant form list.
DATA: BEGIN OF VARIANT_TABLE OCCURS 30,
      VARIANT LIKE RSVAR-VARIANT,
      TEXT LIKE VARIT-VTEXT,
      ENVIR LIKE VARID-ENVIRONMNT,
      ENAME LIKE VARID-ENAME,
      AENAME LIKE VARID-AENAME,
      aedat like varid-aedat,
      MLANGU LIKE VARID-MLANGU,
      protected like varid-protected,
      SELSCREEN(80).                  "<= 20 Bilder
DATA: END OF VARIANT_TABLE.
DATA: CALL_FLAG.                             "screen 305.
DATA: MODE_FLAG.
Print variants screen 308
DATA: PRINT_LIST LIKE RSREPVAR OCCURS 30 WITH HEADER LINE.
parameters in variables
DATA: BEGIN OF VARIVDAT OCCURS 5,
            SELNAME LIKE RVARI-NAME.
            INCLUDE STRUCTURE RSINTRANGE.
DATA: END OF VARIVDAT.
DATA: VARIVDAT_WORK LIKE VARIVDAT OCCURS 10 WITH HEADER LINE.
DATA:EXC_SUBC LIKE SY-SUBRC.
DATA: BEGIN OF LDB_VARIVAR OCCURS 10,
               MARKFIELD LIKE RSVAR-MARKFIELD,
               VTEXT     LIKE RSVARIVAR-TEXT,
               VTYPE     LIKE RSVAR-VTYPE.
DATA: END OF LDB_VARIVAR.
*generate subroutinepool
DATA: BEGIN OF REPDAT_TAB OCCURS 40,
         LINE(72),
      END OF REPDAT_TAB.
*Tabelle zur Übergabe der alten Selektionswerte wenn sich
*Parameter oder Select-Options geändert haben.
*Wird von rs_variant_obsolet benötigt.
DATA: OLD_SELECTIONS LIKE RSPARAMSL OCCURS 20 WITH HEADER LINE.
*Flag für Aufruf aus QUERY und Report-Writer.
*Reportname auf Einstiegsbild nicht sichtbar (not_visible = x)
DATA: NOT_VISIBLE.
*Varianten für Query
DATA: QUERY_SYSVAR.
*Einstiegsbild mit anderem Titel aufrufen.
DATA: N_TITLE(40).
*F4 Hilfe RS_VARIANT_CATALOG mit anderem Titel aufrufen
DATA: G_TITLE like sy-title.
*Unterscheidung auf Listdynpro (hauptsächlich 307)
DATA: CALLER(4).
*sy-subrc Felder für Import und Export.
DATA: EXP_SUBRC LIKE SY-SUBRC,
      IMP_SUBRC LIKE SY-SUBRC.
*Tabellen für dynamische Selektionen
DATA: DYNSEL_DESC LIKE RSDYNBREPI OCCURS 5 WITH HEADER LINE.
DATA: DYNS_FIELDS LIKE RSDSFIELDS OCCURS 5 WITH HEADER LINE.
DATA: DYNSEL_VALUE LIKE RSSELDYN OCCURS 5 WITH HEADER LINE.
*tabellen für matchcodeselection
DATA: BEGIN OF MC_DESC OCCURS 5,
             NAME    LIKE RSSCR-NAME,
             ID      LIKE MCPARAMS-MCID,
             OBJECT(10),
             S_STRING LIKE MCPARAMS-STRING,
             D_TEXT   LIKE DD23T-MCTEXT,
             FROM     LIKE VANZ-FROM,
             TO       LIKE VANZ-TO.
DATA: END   OF MC_DESC.
*Tabelle für Umsetzung dynamische Selektionen
*flag = space -> umgesetzt
*flag = G     -> Variante z.Z gesperrt
*flag = I     -> Fehler beim Import
DATA: BEGIN OF CHANGED_VARIANTS OCCURS 10,
               NAME LIKE RSVAR-VARIANT,
               FLAG.
DATA: END OF CHANGED_VARIANTS.
*Feld für Ikonen auf Dynpros.
DATA: IKON(8).
*Konstanten für Ikonen
CONSTANTS: POP_WARNING(8) VALUE '@1A@',
           POP_ERROR(8) VALUE '@1B@',
           POP_INFO(8) VALUE '@19@',
           POP_COPY(8) VALUE '@14@',
          c_icon_enter_more(15) value 'ICON_ENTER_MORE',
           C_ICON_DISPLAY_MORE(17) VALUE 'ICON_DISPLAY_MORE'.
DATA: MORE_ICON LIKE RSSELINT-OPTI_PUSH.
*Konstanten für Variante ändern, Werte oder Attribute
CONSTANTS: C_VAL VALUE 'V'.
Interne Tabelle für Transport
DATA: BEGIN OF REP_VAR OCCURS 10,
        MARKFIELD.
        INCLUDE STRUCTURE $RKEY.
DATA: END   OF REP_VAR.
DATA: REP_VAR_CURSOR LIKE SY-INDEX VALUE 0.
Tabelle für RS_SELOPT_INFO -> BBS
DATA: DEFAULTS LIKE RSPARAMSL OCCURS 10 WITH HEADER LINE.
Tabelle für Werteanzeige Tvarv.
DATA: TVARVTAB LIKE TVARV OCCURS 10 WITH HEADER LINE.
SUBTY-Equates
INCLUDE RSDBCSTY.
Textfeld für Dynpro 317.
DATA: TEXT(4).
Konstante für Namenskonvention Systemvariante
CONSTANTS: SYS_VNAME(4) VALUE 'SAP&'.
CONSTANTS: CUS_VNAME(4) VALUE 'CUS&'.
Flag für Systemvariante gewünscht.
DATA: C_SYSVAR.
data vari_mandt like sy-mandt.
data sysvar_mandt like sy-mandt value '000'.
Check für Systemvariante
DATA: SYSVAR_FLAG.
Flag für Entwicklungsklasse , Werte Y oder N (aus get_devcalss)
DATA: NON_LOCAL VALUE 'Y'.
DATA: TABIX LIKE SY-TABIX.
*Strutur für freie Abgrenzungen.
DATA: VARIDYN LIKE RSVARIDYN OCCURS 10 WITH HEADER LINE.
DATA: VDATDYN LIKE RSVDATDYN OCCURS 10 WITH HEADER LINE.
DATA: VARIVDAT_DYN LIKE RSVDATDYN OCCURS 10 WITH HEADER LINE.
DATA: BEGIN OF VARIVDAT_DYN_WORK OCCURS 10,
         TABLENAME LIKE RSVARIDYN-TABLENAME,
         FIELDNAME LIKE RSVARIDYN-FIELDNAME.
         INCLUDE STRUCTURE RSINTRANGE.
DATA: END OF VARIVDAT_DYN_WORK.
CONSTANTS: NO_IMPORT VALUE SPACE.
Teilt IM/EXPORT_VARIANT_STATIC mit, welche übergebeneb Objekte
im/exportiert werden sollen.
DATA: BEGIN OF IMEX,
          VARI,
          DYNS,
        END   OF IMEX.
Tabelle für Selektionsbildnummern
DATA: DYNNR LIKE RSDYNNR OCCURS 10 WITH HEADER LINE.
DATA: BEGIN OF CHOOSE_DYNNR OCCURS 10,
        MARKFIELD.
        INCLUDE STRUCTURE RSDYNNR.
DATA: END OF CHOOSE_DYNNR.
Sichern vom Selektionsbild, RSVAR_VARIANTT zurücksetzen
DATA: FLAG_FIRST.     "#EC NEEDED
DATA: FLAG_PROTECTED. "#EC NEEDED
Daten für CALL SELECTION SCREEN Varianten
DATA: HIDE_FLAG.
DATA: LINE_NUMBER LIKE SY-TABIX.
DATA: VARISCREENS LIKE RSDYNNR OCCURS 10 WITH HEADER LINE.
data: variscreens_sav like rsdynnr occurs 10 with header line.
DATA: FLAG_1000.
DATA: DYNNR_TFILL LIKE SY-TFILL.
DATA: VARISCREENS_TFILL LIKE SY-TFILL.
DATA: DMORE_ICON(40).
DATA: BEGIN OF GLOBAL_OBJECTS OCCURS 10,
          NAME LIKE RSSCR-NAME,
      END   OF GLOBAL_OBJECTS.
DATA: BEGIN OF DYN_TAB OCCURS 10,
            DBFIELD LIKE RSSCR-DBFIELD,
      END   OF DYN_TAB.
CONSTANTS: C_P_COLUMN TYPE I VALUE 38,
           C_I_COLUMN TYPE I VALUE 41,
           C_N_COLUMN TYPE I VALUE 44,
           C_S_COLUMN TYPE I VALUE 47,
           C_W_COLUMN TYPE I VALUE 50,
           C_M_COLUMN TYPE I VALUE 53,
           C_O_COLUMN TYPE I VALUE 56,
           MAX_WIDTH_ATTR TYPE I VALUE 77.
CONSTANTS: MAX_WIDTH_SELVAR TYPE I VALUE 57.
DATA: FLAG_NOIMPORT.
DATA: CURR_STATUS(4).
DATA: SCREEN_TITLES LIKE RSSCRITLE OCCURS 10 WITH HEADER LINE.
RANGES V_RANGE FOR VARID-VARIANT OCCURS 10.
DATA: FLAG_ALL_SCREENS.
CONSTANTS: C_LOW TYPE I VALUE 34,
           C_HIGH TYPE I VALUE 58,
           C_TO   TYPE I VALUE 54,
           C_OUTPUT_LENGTH TYPE I VALUE 26,
           C_DISPLAY_LENGTH TYPE I VALUE 87,
           C_DISPLAY_LENGTH_ATTR TYPE I VALUE 104,
           C_DISPLAY_LENGTH_CAT TYPE I VALUE 118,
           C_NO VALUE '0',
           C_DYNNR LIKE SCREEN-NAME VALUE 'RSVAR-DYNNR',
           C_ICON_MORE LIKE SCREEN-NAME VALUE 'DMORE_ICON',
           C_SCREEN_1000 LIKE SY-DYNNR VALUE '1000'.
DATA: BELONGING_DYNNR LIKE RSDYNNR OCCURS 10 WITH HEADER LINE.
DATA: PREFIX(20).
DATA: D_320_TEXT(35).
DATA: OLD_VARI LIKE RSVAR-VARIANT.
DATA: L_SUBMODE LIKE GLOB_SUBMODE.
DATA: ICON_1(40), ICON_2(40), ICON_3(40).
DATA: FLAG_ICON_1, FLAG_ICON_2, FLAG_ICON_3.
DATA: FLAG_CALLED_FROM_SELSCREEN.
DATA: VARIVAR_TEXT LIKE RSVAVA-VTEXT.
DATA: VARIVAR_KIND LIKE RSSCR-KIND.
DATA: LIST_LINE LIKE SY-LILLI.
DATA: MOD_LINE LIKE SY-LILLI.
DATA: G_SP TYPE SYLDB_SP.
DATA: G_RANGE TYPE RSDS_RANGE,
      G_FRANGE TYPE RSDS_FRANGE,
      G_RSDSSELOPT LIKE RSDSSELOPT.
DATA: G_ILL_CHAR.
DATA: FLAG_CHANGE_VARIANT.
DATA: EXIT_FLAG.
DATA: COMP_NODI_NAME LIKE RSSCR-NAME.
DATA: EXCLUDE LIKE RSEXFCODE OCCURS 0 WITH HEADER LINE.
hidefelder für Attributebild.
DATA: HIDE(10).
Feldbeschreibung aufgeklappt oder zugeklappt
DATA: STATE(4).
DATA: NO_DISPLAY_VISIBLE TYPE BOOLEAN VALUE 'F'.
DATA: READ_LINE LIKE SY-INDEX.
CONSTANTS: C_COLLAPSE(4) VALUE 'COLL',
           C_EXPAND(4)   VALUE 'EXPA',
           C_TRUE VALUE 'T',
           C_FALSE VALUE 'F'.
CONSTANTS: CAT_LINE_SIZE TYPE I VALUE '127'.
DATA: G_EXPOREP TYPE SY-REPID.
DATA: SUBSCREENPROG LIKE SY-REPID,
      SUBSCREENDYNNR LIKE SY-DYNNR.
data: g_subc like trdir-subc.
data: status_for_subscreens.
Data for subscreen processing
data: begin of g_subscreen,
        ucomm type syucomm,
        submode(2),
        total type i,
        current type i,
        exclude type rsexfcode occurs 0,
        rkey type rsvarkey,
        variscreens type rsdynnr occurs 0,
        sscr type rsscr occurs 0,
     end   of g_subscreen.
INCLUDE SVARSELO.
Daten für ALV-GRID
data:
GT_TOOLBAR_EXCLUDING TYPE UI_FUNCTIONS,
GRID1                TYPE REF TO CL_GUI_ALV_GRID,
GRID2                TYPE REF TO CL_GUI_ALV_GRID,
alv_fieldcat         TYPE LVC_T_FCAT WITH HEADER LINE,
EVENT_RECEIVER1      TYPE REF TO CL_EVENT_RECEIVEr1,
selected             value 'X',
alv_layout           TYPE LVC_S_LAYO,
alv_STABLE type LVC_S_STBL,
ROW_TABLE            TYPE LVC_T_ROW        WITH HEADER LINE,
alv_container_1      type REF TO CL_GUI_CUSTOM_CONTAINER,
alv_container_2      type REF TO CL_GUI_CUSTOM_CONTAINER.
constants: c_search value 'S'.

Image Gallery issues with Lightbox2 - please help!

Hello there,
I am using Lightbox2 image gallery. The loading.gif and close.gif aren't showing up and I think there's an issue with the path in the lightbox.js file. The loading and close gifs are located in the Images gallery so I changed the path in the lightbox.js file accordingly - I've gone through this many many times but they are still not showing up.
Can anyone please help me?
My website is: www.labellepetraie.com
Here's where I downloaded the script from: http://www.huddletogether.com/projects/lightbox2/#how
I have tried all the path combinations mentioned in their forum but to no avail. What am I doing wrong?
Thank you for any help you can offer to me.
Regards!

Interesting. I've just looked at your scripts, and it would appear that you have blended two versions of lightbox2 on your page,. Is that possible? The lightbox.js file has no function called initLightbox() in it, whereas older versions do. So, try changing this:
window.onload = function(){ // use this instead of <body onload â€¦>
     MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
        initLightbox();
to this:
window.onload = function(){ // use this instead of <body onload â€¦>
     MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
        //initLightbox();
to see if that works. I think so. Turns out the initLightbox() function call that we activated by fixing the code before is no longer needed by the lightbox2 script as of v2.04! I see that it still tells you to put that function call in the body tag, but i think that is wrong (which is very weird to say, can I really be right???). If you look at the example page online you'll see that he uses this body tag:
<body>
and there are no onload's anywhere.
Let me know.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Issues with styles: any help gratefully received!

Hi all!
I made the [perhaps reckless!] decision to use Pages as my primary word processing software for my PhD. I found a great bibliographic editor [Sente], and liked the look and feel of Pages.
Now, 6 months, and about 10,000 words in, I am still broadly happy with my decision: apart from one thing that drives me mad! Any help would be appreciated.
Say I copy text, for example, from the main body to a footnote. The source style is retained. No problem. So, I highlight the text and then click on one of the stlyes in my style draw. In this example, the "footnote" style I have defined. Now.... it just doesnt seem to do this operation smoothly. In this case..... it never applies the font size of the style I choose to change it to. Its driving me nuts! And when I copy text from another source into the main body, and then highlight and select a style from the draw to change... it seems to want to keep the source file, or change it to helvetica, and ignore my styles.
This is really driving me mad, and I am thinking I should transfer all my documents to Word 2008 [which I own], but I really like Pages, and dont want to have to do this if at all possible.
Any suggestions?
Cheers!
Stevie

http://discussions.apple.com/thread.jspa?threadID=1643118&tstart=15
+-+-+-+-+-+-+-+-+
Worried Life Blues 2008
+4. Discussions+
+Apple Discussions, launched in August, 2000, have grown rapidly in usage and features. The main features include personalization, subscription capabilities and email capabilities. _For information on how to use Discussions, please visit the Discussions Help Page_. Cookies should be enabled and an Apple ID account is required if you would like to contribute to the discussions.+
+Entering the Help and Terms of Use area you will read:+
+*What is Apple Discussions and how can it help me?*+
+
Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. … You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.+
+_If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages._+
+*I have a question or issue*—+
+how do I search for answers? _
It's possible that your question or issue has already been answered by other members so do a search before posting a question._ On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
+Search tips are available here:+
+http://discussions.apple.com/help/search-tips.html+
+-+-+-+-+-+-+-+-+
Yvan KOENIG (from FRANCE lundi 4 août 2008 12:27:57)

Big Issue With Safari! Help!

Hello, I have a Toshiba laptop with Windows Vista and I decided to download apple safari web browser but I am having a big issue, every time I open Safari it pop up a window saying ''Safari has stopped working, windows will find a solution for the problem'' but it never finds any solution. please help!
My laptop:
Toshiba A215-S4767
2gb ram
AMD Turion 64 x2 mobile technology @ 2.2GHZ
250gb HD + 80 GB external drive
Ati Radeon X1200 with 128 mb
High Definition 15'4 Screen
Realtek High Definition Audio
Please Help!

Probably the reason you have not had a response is because within this forum there is a long list of threads that talk about the issue and a resolution...
This is what I suggest...
Go here... http://filehippo.com/download_safari/
Download and install all versions up until 3.0.3..
This should leave you with a working version of Safari... 3.0.4 for some reason will not open and run on various Windows Systems...
I am using version 3.1 525.6 from the ADC site.. they are currently at 525.9..
I had the same exact problem... I stayed at version 3.0.3 because of the same problem. I installed version 3.1 525.6 from ADC and had really good luck and good speed increases with application opening...
You must follow these instructions carefully...
Uninstall Safari from your system.. Then look for all traces with your Documents and settings Folders for Safari ... These folders and files must be deleted and completely removed from your system first.. Then start installing from Beta 1 - Version 3.0.3..
The version I am using is downloaded from the ADC site, these versions cannot be released by anyone but ADC, and therefore I cannot link you to any of these versions...It is a violation of the ADC Membership Agreement..
If you search the forums for threads of a similar nature you should start finding information on how to fix it for your system but read through everything first...
Message was edited by: heath28m
Message was edited by: heath28m

Issues with RoboHelp HTML Help and IE7

I attempted to create a basic (one-topic) HTML Help file
using RoboHelp X5 (5.0.2 update), with the topic tied to the TOC,
index, and search navigation tools. I attempted to open the CHM on
a PC running Windows XP / IE7, but it displayed the "page cannot be
displayed" error.
I tried to open the CHM file on another PC running Windows
2000 / IE6, and it worked like a charm.
Apparently, there is something about IE7 (or Windows XP, but
I doubt it) that breaks RoboHelp HTML Help files. Does anyone have
any information about this issue? Thanks!
- Greg

Welcome to the forum.
The problem contrary to your belief originated under Windows
XP.
Click
here for an explanation and the options.

Issues with digital certificates - HELP!

I have no rational explanation, but this past week I was playing with the settings on my computer and deleted all the digital certificates in my computer.
Since then, everytime I want to check my Yahoo! or Gmail, or any type of secure account, there is a pop-up indicating something about not having a secure certificate. I've tried to add the X509 but it just doesn't store it and the next time I reboot the same thing happens all over again.
Can someone please help? Thank you!!

I assume you are talking about the icon on an iPad.
Not all apps have Airplay functionality, more will with time.
If it's the same app sometimes showing icon, sometimes not I would suspect transient network issues losing the connection between the devices. Some of Apple's device seem a bit slow to re-establish connections if they're lost or stubbonly refuse to reconnect - occasionally this can be down to a user's network or the device at either end losing connection even if the iPad remains connected.
There may of course be some software bugs at play.

Windows 8, Y55 ideapad continual clicking issue with touchpad. Help please

For some reason, when I tap to click the item I clicked remains actively clicked when I move my hand away from the touchpad. In order to process any action, I need to move my cursor away from the button I'm trying to click.
Interestingly enough I tried to disable tapping to see if it would solve the issue, and tapping continued to work...which is odd. It doesn't have this issue when I click objects with a mouse, only when I use the trackpad. Please help me, I'm confused.

hi BFG9000,
Welcome to Lenovo Community Forums!
You can try Uninstalling the driver of your touchpad from Device Manager, under Mice and other pointing device and make sure to put a check on Delete Driver/software prompt.
Then try Checking the touchpad if it works ok without a driver, If it does then try downloading a driver from synaptics website.
If not then Most likely this is a Hardware concern and you need to contact Lenovo Technical Support for assistance.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issue with Overall Result - Help

Hello,
I have a query with two restricted keyfigures (0amount used) as actual and forecast. While drilldown by fiscal period, the overall result shows totals for actual and plan separately. Business point of view, they want to have total of both (actual + remaining months of forecast). Is that possible?. If yes, anybody help me on this. We don't want to create CKF to sum both the key figures.
Thanks
Viswa

Appreciate your response Arun. Did the initial work of getting both actual and plan. Everything works and report is live now knowing that the problem of overall result when we drill across by fiscal period. The report is very flexible/dynamic columns and users can enter multiple periods and any versions to use for various purposes. Looking for a solution without making changes to the query, somehow we can achieve/fix the overall result summation. Want to keep creating a CKF as last option.
Thanks
Viswa

USB 3.0 Hub Issue with W510 Please Help

I tried to search for this but no luck. I just bought a Syba 4-port USB 3.0 hub to use with my W510. After plugging in the power and then the USB cord, the drivers installed and everything seemed fine. After restarting the computer I noticed that I had lost Bluetooth (even the LED was off). I tried restarting again and using the Function-F5 keys but Bluetooth wasn't even an option. I disconnected the hub, restarted the computer, and was able to see and reenable Bluetooth. I repeated the problem, and now have resorted to hooking up the hub to my desktop. To make sure it wasn't a "hub" issue I tried a USB 2.0 hub with the laptop and it booted up just fine, with Bluetooth still enabled. Also, while I didn't confirm it, somehow I think plugging the Syba hub in (AC adapter) and then inserting the USB cable actually turned my computer on...weird. Does anyone know why this USB 3.0 hub won't let my computer boot normally? Can anyone recommend a USB 3.0 hub that can be left plugged in and doesn't have any boot or Bluetooth issues? I couldn't find a BIOS setting that might be the culprit.

There appears to be a BIOS bug with the latest BIOS (1.34 for my 4318 CTO W510). After the above failed attempt to hook up a USB 3.0 Hub I tried a different brand (Monoprice) and had exactly the same result. You can't have a hub (with AC Adapter attached or not) to my laptop without it disabling Bluetooth at bootup (the radio is unavailable in Windows until you unplug the hub, restart the computer, and reenable with Function F5). I've elevated the issue to Lenovo and hopefully they'll have a BIOS update...it isn't a driver issue (I don't think) as the Bluetooth gets disabled prior to Windows booting. Has anyone else successfully been able to get a USB 3.0 hub to work, while mainting Bluetooth? By work...I mean not having to plug and unplug everytime...you should be able to leave it plugged in, turn off the computer, turn on the computer, and everything still work. Frustrating.

Recording issues with sound PLEASE HELP

Hi I am currently trying to record a home movie from VHS to DVD.
Playing the tape via the InterVideo MSIPVS program I have excellent video and sound. now here is where my problem lies.
When select to record from the program it records the video perfectly but not the audio. I am just curious as to what the problem maybe. I looked in the record tab on the setup menu and it gives me the option to select the video input source but not the audio input source. I have the audio input selected in the device tab and this allows me to hear the tape that is being played on my computer.
I have read a few of the forum posts and none really seem to cover this problem. I am just curious if there is something I may have missed or done wrong on install that may have caused this.
Currently running :
AMD XP 1600
1gig Ram
TV@anywhere Master
Geforce 5600XT
onboard sound
Win 2k Service pack 4
DirectX 9c
Any help would be GREATLY appreciated as I am about to throw this thing in the wood stove and light it.
Thanks in Advance

I have exactly the same problem!
Record video and on playback only get picture.
Strangley I have noticed that if I pause and dont shut MSIPVS then sound on the recorded file will play. But, if you shut down the programme you dont get sound with the picture. Also if you do this you get a file TShift in the folder where the recorded file is stored.

Performance issue with XI interfaces - Help Needed

Hi all,
       We are having idoc->xi->file. We have the design of collecting the idocs as the standard example BpmPatternCollectTime.
        We have given the collection time of say 5minutes after the first idoc hits the BPM process. The issue is that the idoc messages are getting missed when we are sending 1000 idocs. Also after applying the note 898131 for the correction of missing idocs we got the problem of the timeout exception not being triggered and workflow instance is waiting for a longtime until all the messages are getting into BPM and is getting struck in the queue.
        We are into XI 3.0 SP13. Can anyone provide some help in optimizing the interfaces/server settings/etc..
Thanks in advance.
Jayakrishnan

Hi Jayakirshnan,
check if this helps, whether you have optimal number of dialog processes.
see theselinks as well
Re: BPM is slow in sending Idocs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap exchange infrastructure tuning guide xi 3.0.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/content.htm
Regards
Vishnu

Issues with N8 ,,,,, plz Help

Similar Messages

Maybe you are looking for