Issues with network in Carolina West territory

Greetings,
I am writing this for my Mother (and for myself when I go visit her) as she lives in Carolina West Wireless territory and is a Verizon user (actually the whole family are Verizon users).
Sadly she has major issues with her 3G cell phone. She's always on extended network, so her smart phone is useless other than for calling and texting unless she switches to WiFi and uses her home internet. Sometimes her calls do not go through and instead she gets a Carolina West message telling her she's called "cannot be completed as dialed" - numbers in question are other Verizon numbers, numbers she used to be able to call just fine. And when they call her, they got someone else entirely! This never used to happen.
She is supposed to be via the Verizon coverage map Extended 3G.
She has tried going to Verizon stores for help, and even called and she just gets nowhere. No one seems to have any answers for her.
When I used to come visit her my cell could use 3G (it's a Droid 4, she's got a Droid 3) and I could still get on the internet with it (not using her WiFi, but 3G network) but not anymore, my cell is too rendered to nothing but calls and texts and that's it. My Father's Droid 3 when he comes home says there's no service at all.
Is this Carolina West's doing? Is there anything to be done? Why is the network getting worse for Verizon users here? We keep trying to get help and we keep getting spun in circles.
Can someone please help us? Give us some answers? Some things to say when we call Verizon or go to a store and try to get help? They just look at us like we've grown a second head.
Please, please help!

Hello jaibyrd
Great question! I would be glad to help. It's very frustrating when you get errors or can't access data. It may be the area. There may have been a update ob the other carriers tower.
On the Droid 3 please power the device off then back on. When in our network please Dial *228 and choose option 2. This will ensure the device is looking for all the available towers. For the Droid 4 please power down and remove and reinsert the Sim card and retest.
If the issue persists, I would recommend a network extender. They are like mini cell towers for the home. Learn all about them here: http://bit.ly/AKkC
Joe_VZW
Please follow us on twitter @VZWSupport

Similar Messages

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

Critical Issue with Network

Hi Team,
I have been using Lenovo P780 past one year. From Two months am facing a mojor issue with Network. When am connecting the device with WIFI then after few min. my GSM network goes down even after Turn off the WIFI. After a Hard rebot of the Device also am not able to get any GSM network on my Device. Please help me to resolve this issue. Am expecting more from Lenovo Technical Team.
Note : Am unable to Get GSM network in my P780 Device after using the WIFI.

there was no error occured in AE monitoring as per logs it processed successfully, but receiver party which is outside organization network complained saying that they receive this file empty.
Logs for your reference received by third party:-
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 >>FILE INFO: D:\ftp\kunden\File Name was opened. Sharing is 1. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 Did not receive any data, Error=1506, SubError=0, WSAError=0
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 >>FILE INFO: D:\ftp\kunden\File Name was closed. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 Finishing STOR, Triggering events manager for FX_EVENT_FILE_WRITE_SUCCESS
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 RESPONSE: 226 Closing data connection. Transferred 0 bytes in 1 seconds. 0KB/second.
where in PI we could see message contains data and message has been successfully processed, could it be issue on receiver end?
thanks.

Issue with network or SFTP adapter

Hi Guys,
we have found a case where a file has been received empty by the receviers, although we can see in PI that message contains data and transmitted successfully from AE.
Please note that SFTP adapter is being used here and file contains encrypted data which is being sent outside the organization network.
Can it be network or there is issue with SFTP adapter?
Let me knw if you have any queries.
Regards,
Aki

there was no error occured in AE monitoring as per logs it processed successfully, but receiver party which is outside organization network complained saying that they receive this file empty.
Logs for your reference received by third party:-
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 >>FILE INFO: D:\ftp\kunden\File Name was opened. Sharing is 1. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 Did not receive any data, Error=1506, SubError=0, WSAError=0
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 >>FILE INFO: D:\ftp\kunden\File Name was closed. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 Finishing STOR, Triggering events manager for FX_EVENT_FILE_WRITE_SUCCESS
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 RESPONSE: 226 Closing data connection. Transferred 0 bytes in 1 seconds. 0KB/second.
where in PI we could see message contains data and message has been successfully processed, could it be issue on receiver end?
thanks.

Security Issue with Network Home Directories

We are currently trying to solve an issue with some user accounts whereby students can see teacher's user files. We have x1 as authentication, x2 as elementary file share, x3 as high school and teacher file share. All are Snow Leopard Server.
Here is the problem:
If a student is in the Finder and goes to the top menu bar and clicks Go > Network, they can see a listing of servers and computers.
When the student opens Server, the see the x1, x2, x3 servers. The continue to open folders, digging through Volumes, then the data volume and see the alias for Users. The open that folder and see all the Users.
At that point, if they click on Documents or Desktop of a teacher user, they see everything and are not prevented from accessing the files.
The permissions for the teacher user folder is:
ACL:
Group - Everyone Deny Custom This folder
User - Administrator Allow Full Control This folder, Child folders, Child files, All descendants
POSIX:
User - _unknown Allow Read&Write This folder
Group - _unknown Allow Read Only This folder
World - Others Allow Read Only This folder
I would appreciate any thoughts.

Do you know where the _unknown user permissions are from?
Have the servers been upgraded from Tiger/Leopard?
Also, in your group ACL permissions what are the custom settings you have? I'm guessing you're denying access to all admin/read/write?

Photoshop issue with network login

All my editors are having issues with photoshop and creating a new document. The program launches fine, but when they go to create a new document, they get the RWOD and it locks up and needs to be force quit.
If I login to the local account I can launch photoshop and create a new document without any issues. I have checked the system log in Console, but it does not show me anything that would appear to cause issues. I ssh to that machine and watched system log while they attempted to create a new document and nothing showed up at all.
Anybody have any ideas on what would be causing this? I have tried trashing the prefs as well with no luck. Thanks

there was no error occured in AE monitoring as per logs it processed successfully, but receiver party which is outside organization network complained saying that they receive this file empty.
Logs for your reference received by third party:-
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 >>FILE INFO: D:\ftp\kunden\File Name was opened. Sharing is 1. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 Did not receive any data, Error=1506, SubError=0, WSAError=0
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 >>FILE INFO: D:\ftp\kunden\File Name was closed. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 Finishing STOR, Triggering events manager for FX_EVENT_FILE_WRITE_SUCCESS
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 RESPONSE: 226 Closing data connection. Transferred 0 bytes in 1 seconds. 0KB/second.
where in PI we could see message contains data and message has been successfully processed, could it be issue on receiver end?
thanks.

Issue with Network Home Users on Mountain Lion ( connecting to Lion Server)

I have been forced to setup a network user on a new mac running mountain lion because their old mac just went pop, and have run into multiple issues that I have narrowed down to them being a Network User on Mountain Lion.
1. Contacts get deleted whenever you open Mail. Mail will hang on fist launch until all your contacts in Contacts (I hate the new names! ) get deleted, console shows that the location for the address book database is invalid, seems to be an issue with ~/Library/Containers/apple.mail.com folder
2. Word documents with images in the background do not display correctly, there is a giant red cross through the document
If I change this network user to a mobile home user the problems go away and everying works as expected

How to re-enable the Apple-provided Java SE 6 applet plug-in

Issue with Network configuration - ACS 4113 Appliance

We are having issues with two particular devices. I am trying to remove and add the devices, but when I do a search and go to their IP, I receive.
Failed to edit blahblah.ourdomain.... Reason: The Host no longer exists.
How do I get rid of this so I can readd the devices?
Thanks
Dwane

Yes, ACS SE doesn't support csutil. Please use RDBMS with solution engine and see if that helps.
Creating, Reading, Updating and Deleting AAA clients
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/rdbms_sync.html#wp1011624
Regds,
JK
Do rate helpful posts-

Remote Access Management Console - configuration issue with Network Location Server

2012 Std R2
The remote Access management console operation status shows all green except for network location server .
Error: There is no response from the network location server URL. DirectAccess connectivity might not work as expected, and DirectAccess clients located inside the corporate network might not be able to reach internal resources.
Resolution listed as:
1. Configure the network location server on a server that is highly available to clients on the internal network.
2. If the network location server is running on the Remote Access server, ensure that IIS is running, and that the URL is available.
The remote access server is located on this server. IIS is running. What URL: show I be looking at?
Any other thoughts so I can get remote access working.
l also am getting a remote access error for IPV6, could this be a cause:
RoutingDomainID- {00000000-0000-0000-0000-000000000000}: Unable to add the interface {D37062B2-A3E0-4496-A459-9E0BBCE5423C} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
John Lenz

Hi John,
please follow the steps to reinstall TCP/IP stack.
1.Restart your PC into Safe Mode with Networking.
2.
Edit your registry. Delete the following keys:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock2
3.
Open the nettcpip.inf file in your %winroot%/inf folder
(%winroot% is usually c:/windows).
Find the [MS_TCPIP.PrimaryInstall] section. Change the Characteristics value from 0xA0 to 0x80.
Open the properties of the network connection you want to fix. In the General tab, click on the Install button. Click on the Have Disk button, and point the location to %winroot%/inf. After that select TCP/IP (not version 6).
4.
Now you would notice that you can uninstall TCP/IP!
Do that, then restart the PC.
Go back to your network connection, and install TCP/IP again as per the above. After another reboot, you should be up and running.
I also noted that the XP network repair tool may yank out the ISA 2004 firewall client stuff. Just run the firewall clinet repair or install it again to fix that problem after you did your reboot. Before you do this kind of crazy stuff.
5.
This along with a TCP/IP reset using the netsh command:
netsh int ip reset resetlog.txt
wish you have a nice thanksgiving too
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Bootcamp issue with network connexion

Hi,
I just install windows seven on macbook pro. Windows works fine but i have a network connexion issue. Network card (wifi and ethernet) doesn't work. When I instelled windows, bootcamp download drivers for windows 64bits.
My questions :
- How can fix this network connexion ?
- Where can i download broadcomNetworkAdapter32.exe ? (for connect to internet and install correctly all driver)
Thanks

Did you download and then install the Windows support software according to the Boot Camp instructions? You install the Windows support software from within Windows after you install Windows.

SQLLOADER issues with Network Drive

Hi ,
I am running Oracle 10g in my PC ( Windows XP Professional ) in D Drive. I have created Oracle Directory and mapped to Network Drive Z: I have created external table successfully with this Directory. When i run select statement, i am getting the below error. All the permissions have given on Network Drive.
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file TBL006.txt in DI_EXTERNAL_TABLE not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
ORA-06512: at line 1
Kindly advice me on the above issue, if you know the solution.
Thanks in Advace
Hanimi Reddy

There is no solution.
Oracle simply has never supported networked drives, because you would need to run Oracle using the domain administrator account.
This poses security risks.
You need to copy the file to a local drive.
Sybrand Bakker
Senior Oracle DBA

Many issues with network of 2 AE and one AEBS

I have a well functioning small WDS network of two airport express (AE) stations, a wireless printer, a G4 iMac and a 12" PB. One of the AE is hooked into the cable modem with an ethernet cable and is set-up as the main base station. The other functions as a remote to extend the network.
I bought an Airport Extreme N base station (AEBS). My intention is to use it as a a file server. I've attached a powered USB hub and two USB hard drives to it. I'd also like it to be available on my existing WDS network, so I needn't change networks everytime I want to access files through the AEBS.
The AEBS has version 7.0. I haven't been able to update the version in Airport Utility, because it kind of hangs up (stays at 0%) and then fails.
Problems:
1) to solve the firmware update issue: Do I need to set-up the AEBS to access the internet first? When I'm on my small WDS network, I can't see the base station, since it is setup as a separate network. When I switch to the AEBS network, obviously I do not have internet access. So how do I update the firmware? What could be the reason for the update error?
2) The AEBS file sharing network was available yesterday, but today I can not access it from my Mac (neither the Mac nor the AEBS was put to sleep or powered down during that time). I was in the process of erasing the whole HD so I could do a fresh wireless backup. The menu bar icon for the airport disc shows my AEBS disk, but I can't connect to it. I enter my password to access the AEBS network and then the connection fails. What could be the cause? Do I need to reset the AEBS everytime? Is there an automatic logoff somehwere I need to disable?
3) I tried manually setting up the AEBS to join my WDS network. I followed all the instructions: i.e. adding the MAC address of the AEBS to my main station setup and indicating the AEBS to participate in a wireless network as a remote relay and adding the main station MAC to the setup. Channels are set-up automatically. DHCP is also automatic. However, I get an eror message when updating it. Basically it will say someting to the effect that the AEBS can no longer be found. What could be the cause of this?
(Airpot Utility worked great when I added my second AE to the WDS network. But when doing exactly the same for the AEBS, I get error messages as above.)

I solved all my problems mentioned above. It took a while to figure out.
First I discovered that connecting the Airport Extreme N Basestation (AEBS) to an existing WDS network gave me continuous errors: I couldn't update the firmware from 7.0 to 7.1.1 etc.
So I reset my Airport Express (Ax) which was previously acting as a remote and I reset the AEBS. I kept the Ax (which was acting as a main station and is attached by ethernet to the cable modem) as is. I set up all 3 near each other.
While keeping the reset Ax and AEBS in default settings, I selected my existing Network in the airport menu icon and then I selected the AEBS in the Airport Utility and was able to update the firmware of the AEBS.
Settings for the Ax acting as a main station: WDS settings: Participate in WDS; allow wireless clients. Internet: I set connection sharing to "share public IP address". DHCP and NAT at default settings. Channel 6. ( I discovered that the main station and the two remotes need to be on the same channel!). Set up as a main station, allow wireless clients and and added Mac addresses of the Ax and AEBS. Updated.
Then I started by adding the AEBS the WDS Network created by the main station: participate in network; allow network to be extended = off. Set up as a WDS remote. Allow wireless clients. Added main station Mac address. Internet connection sharing = off. File sharing enabled. Channel 6. Updated.
Same set-up for the Ax as a remote.
Now I can access my two USB drives wirelessly over the network and each remote has an IP address.
I did a speed test over my wireless connection for internet speed. Results: Download: 9442 kBit/s
Upload: 1006 kBit/s
Answer time: 13ms
So everything is OK!

Formatting issue with network printer

I have a bitmap report with a repeating frame (1/2" X 2") that
prints 3 across and 10 down per page in Reports 10g(9.0.4)
Text inside the frame is size 8 Helvetica. I am getting a huge difference
in formatting when I send it directly to network printer(in Unix) versus
when I do STD Screen in Pdf format and send it to local printer in windows.
Output in network printer is bigger and wider, it almost overflows from the
page, where as its perfectly fine when I display the output in Pdf and send it to
local printer.
Is there a way to fix this problem so the output looks exactly the same whether
you send it to network printer or to pdf?
thanks
arniko

Hi Arniko,
Have a look at : http://download.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm I think it offers a good starting point to troubleshoot the issues when printing fonts in reports on Unix.
Thanks,
Adina

Issue with network drive on E3000

So I have a brand new network drive and its NTFS formatted and when I go into the management screen all it shows is:
Disk1 : Seagate FA GoFlex Desk
Partition
File System
Capacity
Free Space
Create Share
Total
1863.016 GB
1863.016 GB
When I try to connect it returns the volume name, but cannot be mounted. When I format at FAT32 then instead of the * I see FAT32, but not so with NTFS. I owuld have gone FAT32, but the 4GB file limit is a problem.
Help? Any ideas?
Thanks.

As far as i can look into this, Your HDD should work with the same as Original Documentation that comes along with the Linksys E3000 router and also mentioned on the official website, says that it supports file system like FAT16, FAT32 & NTFS.....
What you can try is first of all take up a complete back up of the data that is already present on the HDD that you are using and then try to reformat the HDD using one of your computer...
Also check out the following links to support your cause
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=1eb1e107d62d49b8ba23b...
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0868d4e24a6a468280c3c...

Making internet sharing work (Issue with Network Address Translation)

Trying to use internet sharing to enable a BluRay player to get access to the internet for firmware updates, BDLive, etc.
MacBook Pro is setup with Airport (en1) enabled and connected to the internet.
Ethernet port (en2) is set to "Configure IPv4: Off."
I have configured the /etc/bootpd.plist file with the following configuration as mentioned in http://www.macosxhints.com/article.php?story=20071223001432304&query=xbox%2B360.
<key>replythresholdseconds</key>
<integer>0</integer>
After starting up Internet Sharing, the following is observed:
Ethernet port(en2) is reporting 192.168.2.1 as its IP address in Network Utility but not in the Network System Preferences Pane.
The Mac is responding to the DHCP request from the BluRay player and the BluRay is assigned an IP address of 192.168.2.2/24 with a default gateway and DNS of 192.168.2.1.
So you think there would be success with this but wrong. The system log is reporting that NATD "failed to write packet back (No route to host)" or "failed to write packet back (Host is down) and the connection test on the BluRay player is consistently failing.
Even manually configuring the ethernet port on the Mac is resulting in failure. Is there something else I'm overlooking?
Hoping someone can spread some light on this. Thanks.

Ashy Larry wrote:
So you were able to get it to work then?
I ask because I want to get the Sony BDP-N460 Bluray player for my parents, as it's the only Sony player aside from the Playstation 3 that is Netflix capable. I'm not sure why their other wi-fi enabled player doesn't have Netflix on it. I suppose I could get them a Playstation 3, but they don't really need one.
More than likely that Sony is positioning its products that way so people do go for the PS3 and increase it install base and possibly get you to by a game or two.
I want to connect the player to an old iBook G3 that's running 10.4 and share its connection. I did this successfully with the iBook and my Xbox 360 and wanted to know if it was possible to do so with a Bluray player.
I would bet that you will be able to accomplish this if you were able to get a 360 running through it. Just ignore the Blu-Ray player's test connection tool and try to connect to Netflix. Just play it safe and buy it through a retailer like Amazon where returns are hassle free.

Issues with network in Carolina West territory

Similar Messages

Maybe you are looking for