Issues with new AirPort...worst i- uploading files Stall and Stop/Freeze

I am having a few annoying problems but the one that is the most urgent is that file transfers to servers have quit working. I have the latest AirPort Utility installed (5.3.2), the latest Fetch software installed (5.3) and have checked the Apple Software updates, it is all set.
The ftp server freezes ( 'stall' shows on the ftp window ) partially through the upload. These files used to be a breeze and transfer quickly. This is happening on my website ftp server and that of another that I tried, it is not the server at issue.
Other issue: in browsers, loading of pages is often slow, especially the first time I launch Firefox, nothing comes up even though default page is in preference. Safari is working about the same as it did, which is OK but not always perfect, so I do have that but want the other to work since it works better and is more like windows when I need to check site pages I am developing.
Upstairs computer iMac (2 floors away from the Airport) is working well. We didn't put the new AirPort Utility on that machine, it didn't need it. The two laptops, one even in the same room as the Airport, are having these issues. Neither would work at all until the AirPort Utility that came with the unit was installed, but we are, to repeat, having these issues.
Thanks.
Thanks.

Alright, so new question in regaurd to this topic anyone know a good codec to convert too dealing with divx related encoded avi files?
Searching with Google will find numerous converters. I've never needed one, but came across this one: http://www.ojosoft.com/video-converters/index.html
I don't know if it is any good.
However, you were so focused on it you didn't understand that the reason the update isn't an update is because it disables half the card, which means only the primary function is usible and its secondary function, the other half of the reason it was purchased years ago, becomes meaningless.
I understood perfectly and you can revert to the older driver to regain functionality again, but that does not solve the issue with PR. It makes me wonder why the manufacturer updated the driver version, but disabled part of the functionality in this newer version. Did they have compatibility issues they could not solve?
Anyway, your first step after reverting to the older driver should be to creact a new project using a DV preset, capture some clips from your DV camera and see if you still have the problems. If not, you will know that the other clips caused problems because of the codec.
It was not my idea to call it scratch disks, that is the way Adobe calls it and as such they are mentioned in the manual and help file. Using other terms makes it much harder to find the information even though you may be used to other terms.

Similar Messages

  • Issue with new Airport Extreme Base Station 802.11ac

    I just purchased an AEBS (new model with 802.11ac).  I'm using it with Comcast internet service using a Motorola Surfboard SB6121.
    I have a very odd and frustrating issue.  The internet simply blips in and out.  I have it set up with WiFi and have connected devices such as my iPhone, iPad, Mac Pro, and a Chromebook to it.  I have the issue on all devices so I know it's not device specific.
    The network itself never goes away.  When I look at the WiFi area on my Mac even when the internet isn't working it shows it's connected to the WiFi network.  Also, when the internet is not working the green light is on and staying lit (not blinking) on the AEBS so it appears the WiFi Network part of it works fine.
    As mentioned it's the internet service itself that blips in and out.  What I mean by this is it may come on for 40 secs, go off for 20 secs, back on again, and off, just like that. I have not timed it and that would be hard but it seems to be very regular, something like 40 on, 20 off, and it may not even vary at all.  It's a very bizarre issue.  I have also direct connected the modem via ethernet to my Mac Pro. I used it for several problems with no problem so I know it's not the modem.
    The only thing I can think of is I received a defective AEBS.  I purchased it through Amazon and I almost contacted them to do a replacement and send this one back.  Yet I'm hoping it's something simple with the settings.  Now I have already done a factory reset of the AEBS and that did not help.  Yet I'm hoping it's simply a setting that I need to modify or wipe out.  Any idea of what's causing this or is it simply a defective base station?
    Thanks for your help.

    There is a bug with the modem where the ethernet is not syncing properly.. The bug is particularly bad with SB6121 and SB6141.. so you got it right.. welcome to the bug farm..
    https://discussions.apple.com/search?q=sb6121
    https://discussions.apple.com/search?q=sb6141
    There is no solution.. a new one could do the same. It is not 100% consistent.. I have recommended people use a small 10/100 switch between the modem and the AEBS.. or use a cross over cable. It works for some but not everyone.
    Some modems seem to work better.. but IMHO it is not your problem it is apple's.. and they are keeping quiet as they do.
    Send the AEBS back either for replacement.. and hope for a better one.. or just get a refund and buy something better.. eg Netgear R7000 or Asus RT-AC68U.

  • I am unable to join my existing wireless network with new AirPort Express

    I am unable to join my existing wireless network with new AirPort Express.
    I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
    AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
    I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
    Any suggestions? Thanks in advance.

    Welcome to the discussion area!
    It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
    Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
    Power down the AX
    Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
    Release the reset button after 10 seconds
    When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
    Do you know the exact security type that your D-Link router is using? That is the key element in the process.
    Open AirPort utility, click Manual Setup
    Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
    Click the Wireless tab
    Wireless Mode....Join a wireless network
    Wireless Network Name...must exactly match your D-Link wireless network name
    Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
    Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
    Wireless Password...must match the D-Link network
    Click the Music icon to enable AirTunes
    Click Update to save settings
    Any luck?

  • I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITun

    I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITunes is corrupted or is not installed correctly.  Please reinstall Itunes"
    iMac, iOS 6

    HI,
    If your old version of iTunes is still working - then I sugest you stick with that.
    iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
    Just a friendly advise and warning :-)

  • When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

    When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
    I have attached the url of the unwanted site.

    Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

  • How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    It's hopelessly outdated. It's simply not compatible.
    Mylenium

  • All backup/sync files for Iphone lost on old PC, anyway to sync with new PC without losing music, photos, contacts and texts?

    All backup/sync files for Iphone lost on old PC, anyway to sync with new PC without losing music, photos, contacts and texts?

    Make sure your new computer is authorized in iTunes. Disable autosync in itunes, connect your iphone, right click on it in the device list and choose backup.
    This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
    Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your device got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    Restoring: http://support.apple.com/kb/HT1414
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    Apps can be downloaded again for free, in the US music as well. Downloading past purchases from the App Store, iBookstore, and iTunes Store
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    See also How to back up your data and set up as a new device

  • Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

    Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

    Any luck with the suggestions mentioned by Bob Timmons?
    I am having pretty much the same issue.
    Got a new modem Arris SB6141 and a new Airport Extreme ME918LL/A. Activated with my ISP (Comcast). Worked with a savy tech who knew the modem and Airport Extreme. Ensured all items were correct from the ISP side.
    I follow the instructions as indicated for Airport Extreme by it fails to detect the internet and dns servers. Comcast suggested I call apple. Reading posts above I will:
    -Reset the airport extreme
    -Unplug the modem for 30min
    Airport Utility 6.3.4 (634.17)
    Airport Extreme ME918LL/A Firmware Version 7.7.3
    MBP - Yosemite Mid 2012
    Appreciate the assistance folks.

  • Are there any known issues with focus stacking or auto align causing PS to stop responding?

    Are there any known issues with focus stacking or auto align causing PS to stop responding?

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Does anyone else have issues with charging the 4?  Both my daughter and I are experiencing issues.

        
    Does anyone else have issues with charging the 4?  Both my daughter and I are experiencing issues.

    HLDkro wrote:
    our original ones got frayed and no longer work.  Been buying USB charges from my local pharmacy.. Need a new one every 2-3 weeks.  I went to Verizon and bought a compatable one and right now I have my phone balanced on the garbage can with the cord strategically placed for it to charge.  The USB does not work pluged into a wall, however, the same cord does work in my car.
    " I have my phone balanced on the garbage can with the cord strategically placed for it to charge."
    Makes it sound like the charging port is damaged or loose.

  • Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
    anyway, problem 2 and 3 are still to be solved.
    and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
    //e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
    Last edited by deF291 (2011-04-23 16:16:31)

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • How to get uploaded file name and path in BefExportToDat event script

    I would like to get hold of the uploaded file name and full path in the event script "BefExportToDat", as I need to extract values from particular fields. However I have not yet found a way to do this.
    - The input variable "strFile" returns the .Dat file path in the Outbox, to which it is about to export the data. This is no use to me.
    - The API variable RES.PstrFilename is returning nothing
    I am using RES.PstrFilename in the "BefFileImport" event script in a different FDM application and it works fine, however I need to find a way to get this to work in the "BefExportToDat" event script.
    Please let me know how this might be achieved.

    I am looking through the API calls in FDM Workbench, but cannot see the table (tPOVPartitions) you mentioned listed. Is this the correct name? And do I just use the function listed in the object browser to run the query?
    Furthermore (going back to my initial thoughts of using strFile), it appears that although the variable contains the .Dat filename and path, the actual file is non-existent when "BefExportToDat" is executed:
    Error:
    Error: Export failed.
    Detail: File not found.
    This would make sense, but it does make the variable "strFile" a little pointless since one cannot make use of the file in this particular event script. Do you please have any thoughts on this?

  • I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

    I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • I'm having trouble upgrading to ITunes v12.0.1 with Win 7. Download progress bar stalls and eventually cancels itself. Have tried Tools -- Download Only, but same result. Have been using iTunes for 3  years without difficulty

    I'm having trouble upgrading to ITunes v12.0.1 with
    Win 7. Download progress bar stalls and eventually cancels itself. Have tried
    Tools --> Download Only, but same result. Have been using iTunes for 3+
    years without difficulty; I have lots of ram, hard drive and speed.
    Thanks for your input

    One step listed in the link to "helpful" info, was (when Iooked 30 seconds ago), to search for and download the newest version of iTunes. I'm running iTunes on Win 7 machine and was prompted to update today, 10.22.2014, and did so without a problem. Having said that, however, it looks as though the latest iTunes (12.0.1.26) is finally doing what the last version refused to do, which is to actually fully populate all my playlists on my 6, but there is a hitch: 12.0.1.26 will NOT allow you to show the sidebar unless you click on "playlists," that is, you cannot keep it open all the time.
    And, when plugging the 6 into the computer, the phone icon shows up but clicking on it does nada. What does work, for some strange reason, is clicking on the tiny icon (just under the "Store" menu link at top screen) which looks much like a tiny barrel, someone's idea of external drives, I suppose. The phone then comes up, with the list of stuff on the phone just under it where the sidebar used to be. Sync is now restricted to the lower right of the screen.
    Apparently, you will also need to update your iPhone's software as well; some friends with the 4 and 4s, however, had troubles with them after upgrading. The message from Silicon Valley (I can see Apple from my backyard, ha ha) is apparently, "keep upgrading," folks, get rid of those old phones.

Maybe you are looking for