Issues with nokia configuration tool 5.0 - E72

I wanted to install a new profile and save the old one for a few people.
Since typing on the PC is much easier, I hoped I could use the configuration tool
After reading the data it lost contact and couldn't find my phone again.
A new try after running PC-Suite 7.1 first:
it finds my phone (with latest firmware) but cannot import / read any data
Any ideas?
By the way: the change language options doesn't work (only English has been installed)

Hi,
I am experiencing similar issue: from PC Suite v 7.1.40.6 I can see the Nokia E72-1 mobile phone, from the Nokia Configuration Tool v 5 I can also see the Nokia E72-1 but from the Configuration Tool I cannot Edit Online the mobile phone and I cannot push a configuration either. This is weird !
Also, wether the phone is connected through USB or Bluettooht, I get the same results.
Anyone has an idea why this happens and how to solve the situation ?
Regards,
Bluea.

Similar Messages

  • Error with Nokia Configuration Tool with a E71.

    Hi everyone, when using Nokia configuration tool, I tried many times to send a profile saved with a E71 to another E71 but each time I try I get the same error message. When trying to copy the PKI / Certificates group , the soft says  "error 500 unexpected condition that prevented to request being fulfilled" ; the others groups work fine. I'm used to do this with the E51 and I've never encountered this problem. I have to program a lot of phones so it would be much easier for me if this method works.
    Thank you for your help.

    Hi Gabor,
    If the issue is still alive, please try to connect your N97 device after launching the Nokia Configuration Tool, NCT should detect your N97 device and if there are no profiles created for N97 device, It will prompt you to create a new profile.
    I dont see any issue in identifying the N97 device with NCT 6.0.
    Please let me know if it does not help.
    Thanks & Regards,
    Raghava Reddy K

  • I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

    I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

    artisttouch,
    If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
    To solve it, you may try the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save curent artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Nokia Configuration Tool and E70 with new firmware...

    After the firmware update with NSU an interesting problem appeared - every attempt to import or load the profile from the phone to application fails with error message stating that the connection was lost. No difference whether to use USB or bluetooth connection. Because all was fine before the update, the alleged Nokia statement about the USB port problems on many computers (found on some S60-related blog) cannot be taken seriously.
    It seems like the Configuration Tool is now also needing some update for compatibility with 3.06330.09.04 firmware
    P.S. However the program is not completely unusable - I managed to load the e-mail and SIP server settings to the phone without problems.
    388 -> 688 -> 6150 -> 6310 -> 6310i+1100+ E70-1(3.0633.09.04/crippled VoIP)

    ...have to take back this P.S. on previous message - too bad there's no way to edit the thread openings (replies are editable however)
    388 -> 688 -> 6150 -> 6310 -> 6310i+1100+ E70-1(3.0633.09.04/crippled VoIP)

  • BW hierarchies issue with BOBJ Reporting tools

    Hi All,
    Brief about the requirement:
    Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
    Initial Road map planned for implementation was
    o     to use Crystal for operational and formatted reporting
    o     to use WebI for Ad hoc and interactive reporting
    o     to use Xcelsius for Dashboards
    Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
    What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
    And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
    Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
    Thanks & Regards,
    Bala

    Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
    XI 4.x supposedly resolves mots issues but here again details are not known.
    I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

  • APEX Listener 1.1.4 install issue with listener configuration

    Oracle XE 11gR2
    APEX 4.1.1
    APEX Listener 1.1.4
    Glassfish 3.0.1
    =============
    Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
    Any ideas?

    Hi,
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
    You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
    But perhaps the error disappears as soon as you also get a proper configuration page.
    -Udo

  • Special characters issue with Nokia Maps on N95

    Hi there,
    when using Navigation in conjunction with Nokia Maps on my N95, all streets and towns which contain any special character in their name (for example: é, è, ü, ä, ö, etc…) do appear as unreadable garbage on the screen of the N95.
    I only noticed the problem after having purchased the 3 years license Navigation upgrade (EUR 99.99) and immediately notified Nokia. That was back in October. Since then I have called them at least 10 times and ultimately I have asked for a refund as no solution is still available.
    In all these calls with Nokia, the only reasonable argument I heard was that maybe (!!!) the new software update version 20.0.015 released back at the end of November could solve the issue. Unfortunately, for my phone (which is a branded one) the update is not yet available.
    Today, after calling them again, I was told that Nokia’s policies do not foresee refunds and therefore my request has been rejected. I was told to bring my phone to a Nokia Store and see if they can help me (I don’t see how). I was also told that maybe I would have to send-in the phone for repair.
    This is soooo frustrating that despite the 3 months of patience and all the money spent for the N95 (not quite cheap), the navigation upgrade and the phone calls to Nokia, I still have the same issue. I will probably end up filing a complaint with a monthly consumer’s magazine in the hope they will publish my story.
    After all, it may not even be Nokia’s fault but rather the guys who are responsible for the maps, but if Nokia accepts to have a commercial venture with a vendor, than they also accept liability for the joint product. And by turning down my legitimate request for refund, they have proven not to give a **bleep** about people like you and me.
    Forgive me for the long post - needed to release some of the frustration...

    I have been using an N95-8GB since Nov.'07. From my experience with this phone that has a built-in mass memory besides the phone memory. I had trouble retrieving some of the softwares I have installed. For eg. I have saved some themes in the mass memory & I could not find it when I want to delete it. There are some 3rd parties games software inside where I cannot even delete
    This is what I don't like about the phone. I have bought an N82/Black recently as it uses an external memory card.
    Coming back to Nokia maps. Personnaly, I don't think they are that good & I have problem downloading it into my phone from my PC after having downloaded it from Nokia.
    By the way the Nokia map is not even the latest map 2.0. Is still a 1.0
    I used Navfone map software & it works OK in the 8GB. You have to purchase it.
    I have used a couple of N-series phones in the past ie. N-90, N-70, N-71, N-73, N-80/Black, N95, N-95/8GB & now N-82.
    Common with all N-series phones. After you have disconnected when you are done with your call you have to wait for a while before the word "disconnected" disappears.
    The more features it has, the more problem you are gonna to encounter.
    Unless you want to download softwares into your phone & have a good camera thats where the N series phones come in.
    For normal usage, a 40 series phone will suffice.

  • Skype Sign In Issue with Nokia E5

    Hi Friends,
    I am facing skype log in problem in my mobile Nokia E5 where as via PC i can logged in successfully. Through mobile whenever i try to log in skype it shows skype sining and later on after few seconds it stop working. Plz suggest how can i resolve this issue with my Nokia E5 ?

    Hi kishor12345,
    To further verify, are you using the internet browser when trying to access the Skype? If so, have you tried browsing the other website wherein you need to sign in your account first before you can proceed? In case that you are using mobile data, please use Wi-Fi connection instead. You may also restart your phone by switching the phone off, take the battery out, put it back in after a few seconds and switch your phone on.
    Let us know how it will go. 

  • Issue with Network configuration - ACS 4113 Appliance

    We are having issues with two particular devices. I am trying to remove and add the devices, but when I do a search and go to their IP, I receive.
    Failed to edit blahblah.ourdomain.... Reason: The Host no longer exists.
    How do I get rid of this so I can readd the devices?
    Thanks
    Dwane

    Yes, ACS SE doesn't support csutil. Please use RDBMS with solution engine and see if that helps.
    Creating, Reading, Updating and Deleting AAA clients
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/rdbms_sync.html#wp1011624
    Regds,
    JK
    Do rate helpful posts-

  • Issue with TableAdapter Configuration Wizard and CASE statements

    I am having an issue with using any CASE statements in the select clause for the Table Adapter Configuration Wizard (TCW).  I can take any query without a CASE and it will run fine, but inserting any CASE statement in the Select such as:
    SELECT
    (CASE WHEN :ras_sort = 'D' THEN TO_CHAR(a.TRANS_DATE,'YYYYMMDD')
      WHEN :ras_sort = 'C' THEN  c.CLAIMDEP_NAME
      WHEN :ras_sort = 'A' THEN  TO_CHAR(a.ACCOUNT_NUMBER)
      END) sort1
    FROM xxxx
    causes the TCW to error with "error in list of function arguments, 'THEN' not recognized" and several other errors.  I have tried with and without parameters in the CASE and have tried both forms of the CASE statement.  I have tried multiple queries, all that run with no problem outside of TCW and ODP, but this seems to be a real issue
    Is this a known problem and are there any workarounds that will allow use of the TCW?
    Thanks,
    Dave

    Hi Ashish,
    perhaps you launch the Web service wizard from the wrong location (i.e. not selecting the SEI you want to use). Did you strictly follow the steps described in the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/44/f36fa8fd1d41aae10000000a114a6b/frameset.htm">documentation</a> for creating the web service?

  • WIN10 issues with HP Protect Tools Security Manager

    WIN10 won`t install on PC´s with  HP Protect Tools Security Manager (WIN7), as it is incompatible with WIN10 install. program reuires that HP Protect Tools will be uninstalled before proceeding with installation of WIN10. However, this seems to be quite impossible. Just disabling the program with the stemps described earlier does not work. Has anyone info how to UNINSTALL completely the HP Protect Tools Security Manager? I guess HP will notice this issue soon because there are many HP PC owners with WIN7 (probably even WIN8) that are unable to install WIN10,  and  make steps to create a new with WIN10  compatible version  of the Tools Sec. manager, but it will probably take some time.

    Try update your system with HP SoftPaq Download Manager and reinstall Win10.The problem was my old version of HPPTSM. With 8.3.3.... works.My HP 6470b, Win7 64.

  • Issues with Nokia Music - Nokia 5800 XpressMusic

    Hi All,
    I just bought my Nokia 5800XM today and I really am enjoying it. However, the issues I'm experiencing with Nokia Music are very frustrating...
    In short:
    1) I already updated all components, my Nokia itself and all the applications that came with it
    2) I already reinstalled Nokia Music after uninstalling it from Add/Remove Programs
    3) Main issue is as follows:
    -> Downloading Nokia Music itself: No probs
    -> Installing it using the Nokia Installer: No probs
    -> Starting it up the first time: I do get a welcome screen where I have to fill in a few things (language, if I want to import music right away and such). No errors here.
    -> However, when clicking "Next" in this screen, Nokia Music doesn't load at all. I get an error (MS Vista:Application is not responding and MS Vista is searching for a possible solution). A few seconds later MS Vista can't supply a solution, so the only option is to shut Nokia Music down without ever seeing the program.
    This is very frustrating. Even more so, since I got 2 vouchers for a total of 125 music clips which I would really like to use besides my future purchases.
    I would really appreciate it if someone knows the definite solution for this very irritating issue.
    Thanks in advance!

    Hi Freekiedee
    Try to re-install the nokia music by following these instructions.
    1. Close the Nokia Music PC application
    2. Go to Add/Remove programs and uninstall Nokia Music
    3a. On XP, delete C:\Documents and Settings\<<Windows username>>\Local Settings\Application Data\Nokia\Nokia Data Store
    3b. On Vista, delete C:\users\<<Windows username>>\appdata\local\nokia\Nokia Data Store 
    4. Download and install Nokia Music from http://europe.nokia.com/get-support-and-software/download-software/nokia-music-old/download
    http://www.nokia.com/support

  • Multiple issues with Nokia Lumia 920

    I bought my NL920 about one month ago (Telstra). It had been working flawlessly up until a few days ago.
    The first issue I noticed was the back, start and search buttons were no longer being illuminated, no matter what. I tried multiple soft resets to no success. I just left it, thinking nothing of the problem. 
    A day or so after I noticed the issue with the backlight, two more strange things began to occur: 
    Tilt doesn't work at all. The screen doesn't rotate when the phone is flipped, and it doesn't seem to recognise tilting whatsoever (noticed this when I attempted to play Doodle Jump).
    And second issue is apps are crashing as soon as they are launched. This doesn't happen with every app on the phone, but it occurs while trying to use some of my most used apps (Facebook and Camera are the main ones). I can't launch the camera app at all, and the side button doesn't work either. 
    I tried a hard reset in an attempt to resolve these issues, but all three issues are not fixed at all. 
    I have no idea what to do now. I've never dropped the phone, it's always been look after well. I am 99.9% sure it isn't something physical. 
    These issues all seem to have came after updating some apps (Extras & Info was one of them I believe). Could that be the problem?
    Swapping the phone for a new one would be a last resort. 
    Thanks in advance for any help!
    Solved!
    Go to Solution.

    I just reset it, didn't work unfortunately. Looks like I'm going to have to replace it. 
    Would I just have to take it to my Telstra shop and let them deal with it? Or can I send it to Nokia directly? 
    Thank you.

  • Routing issue with Nokia Drive on Lumia 900

    So I finally tried to use Nokia Drive on a real trip (in New Jersey, USA) and I've noticed that the software often seems stuck on returning you to the originally plotted route when you deviate from it, instead of finding the best remaining route based on the new location. I'll give details for my particular trip in case this is a local issue.
    We decided to take the NJ Turnpike to route 18 to River Road to Interstate 287 instead of 295 to 206 to 287 as Nokia Drive recommended (the routes are roughly equivalent in travel time, so I don't fault this initial route selection). When we entered the Turnpike, the new route kept trying to get us to 295 until we passed Exit 7 (In reality, past Exit 5 there isa considerable penalty to getting off the turnpike and onto I 295).
    Finally, after Exit 7 it decided we should stay on the turnpike and get to 287 directly using Exit 10 (This too is roughly equivalent in travel time, so it was a reasonable suggestion). Once we took Exit 9 to route 18 instead it picked a different route than the one we are familiar with and this is where the biggest problem occurred. The route it suggested would enter 287 North at Exit 7, while the route we took entered 287 at Exit 9. It kept insisting we get back on its rout and get on at exit 7 to the point that when we were about to enter 287 at exit 9, it told us to get onto 287 *south* and take it to exit 7 where we would exit the highway and immediately re-enter it northbound. This is rediculous and should never have been suggested.
    Am I right in my assessment that the software tries to stick to the original route instead of calculating a new one on the spot? What possible advantage can there be in doing it this way?
    Thanks in advance,
    Boris

    Here is a quite stupid example on route recalculation and how it tries to return to the route originally suggested. The recalculated route suggests that I turn right, drive a few meters and then make a U-turn. The error is not in map data itself. The other picture shows that turning left is not forbidden.
    Fonero
    (Lumia 820, 8.0.10328.78, 3047.0000.1328.0003, Here Drive+ 3.0.4121.0, map 8.30.51.121)
    Attachments:
    MapsRoute.jpg ‏15 KB
    MapsRoute2.jpg ‏15 KB

  • Issue with UDMS configuration in SAP PI 7.4

    Hi All
    I am trying to configure User defined search in AE of SAP PI 7.4
    But for some of the interfaces i am facing the issue. I get error stating that Service Interface or Namespace doesnot exist in the set of allowed list.(but SI/Namespace exist in ESR)
    This issue is only happening only with few Interfaces not all.
    I have followed the below link to configure udms in AE.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/803b22cf-ad75-2f10-0790-da055f2e8c0e?overridelayout=true
    Please suggest.
    Thanks and Regards
    Osman Abdul Aziz Jabri

    The surveys functionality was not included for PPC platform in the Service Manager 4.0 release.  There was I beleive a technical issue that prevented it from being included.  It may be included in a future release.
    --Bill

Maybe you are looking for