Issues with Office Documents in Sharepoint Foundations 2010

We recently upgraded to Sharepoint Foundations 2010 from Sharepoint V3.0.  When I did the install of Sharepoint Foundations 2010, there was no mention of Office Web Apps in the Technet article.  Now when our users try to open a document from Sharepoint,
then make changes and try to save back by just clicking on the "Save" button, they get an error stating that the upload failed or that the document is open in "Read Only".  After searching for a month for an answer, I believe I need
to install Office Web Apps for Sharepoint but have yet to find an article that explains how to do it.  I've found the articles on 2013 but not 2010.  The article on 2013 asks that I do things in the Sharepoint Foundations server but when I follow
them, the options are not there.  If anyone has any experience adding in the Office Web Apps to Sharepoint, I would sure appreciate some assistance.

Hello,
You should ask on the
SharePoint forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

  • Slowness Issues with Windows Authentication in SharePoint Foundation 2010 sites

    All, 
    We are having a strange issue with SharePoint Foundation 2010 sites where sites are very slowly loading when accessed via windows based authentication where as the extended sites in  forms authentication are loading normally.
    There were no error logs or even SharePoint logs also except the images load time is showing with different load times.
    Attached are the patches that were updated to the server that may be issue but not sure. Can some one please share your thoughts.
    SQL connectivity b/w the server is good.there are no n/w issues except that the users are using the sites with a different domain other than the domain in which the servers were hosted.
    There is a trust b/w the two domains.This was never changed and there were no issues in the last 2 years.
    Thanks keshav,Share point Developer

    we do have trusted domains
    Inder : It would be better if you run that command again now.
    Inder: How many AD server do you have
    Inder: Do you notice the login request go to nearest AD server. 
    and https sites. Please share your thoughts.
    Inder: All the certificate have intermedite certificates. You need to logon to each SP server, and install
    these certificates on trusted root authority 
    If this helped you resolve your issue, please mark it Answered

  • Features comparison of SharePoint Foundation 2010 & Office 365

    Hi,
    I there any documentation/chart or table comparison of features between Office 365 and SharePoint Foundation 2010?
    I can only search comparison between office 365 and SP Foundation 2013.
    Thanks!

    See http://technet.microsoft.com/en-us/library/sharepoint-online-service-description.aspx
    Towards the bottom it has the on-prem feature sets, but has all of the online and onprem feature sets listed on this page.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Prompting the credentials while click MS office documents in document library in SharePoint Foundation 2010

    Hi,
    I have site with contains many document library each contains many MS Office and Pdf files. We have provided document library level access rights. While users click the file name, "Prompting the credentials while click MS office documents in document
    library in SharePoint Foundation 2010".
    Its annoying the user.
    How could i resolve this? Its for all users.
    Note: only for MS Office file. other files are opening correctly.
    Kind Regards
    Poomani Sankaran

    Hi,
    According to your post, my understanding is that you got the promote issue when clicked the documents in the library of the SharePoint foundation server.
    The issue may be caused that the Kerberos authentication is misconfigured, you can change to NTLM to check whether it works.
    http://www.techrepublic.com/blog/smb-technologist/prevent-unwanted-credentials-prompts-with-sharepoint-document-libraries/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Issue with SharePoint foundation 2010 to use Claims Based Auth with Certificate authentication method with ADFS 2.0

    I would love some help with this issue.  I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0  I have a test account set up with lab.acme.com to use the ACS.
    When I log into my site using Windows Auth, everything is great.  However when I log in and select my ACS token issuer, I get sent, to the logon page of the ADFS, after selected the ADFS method. My browser prompt me which Certificate identity I want
    to use to log in   and after 3-5 second
     and return me the logon page with error message “Authentication failed” 
    I base my setup on the technet article
    http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
    I validated than all my certificate are valid and able to retrieve the crl
    I got in eventlog id 300
    The Federation Service failed to issue a token as a result of an error during processing of the WS-Trust request.
    Request type: http://schemas.xmlsoap.org/ws/2005/02/trust/RST/Issue
    Additional Data
    Exception details:
    Microsoft.IdentityModel.SecurityTokenService.FailedAuthenticationException: MSIS3019: Authentication failed. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
    ID4070: The X.509 certificate 'CN=Me, OU=People, O=Acme., C=COM' chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed
    correctly, but one of the CA certificates is not trusted by the policy provider.
    at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
    at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
    --- End of inner exception stack trace ---
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.BeginGetScope(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
    at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.BeginIssue(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.DispatchRequestAsyncResult..ctor(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginDispatchRequest(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.ProcessCoreAsyncResult..ctor(WSTrustServiceContract contract, DispatchContext dispatchContext, MessageVersion messageVersion, WSTrustResponseSerializer responseSerializer, WSTrustSerializationContext
    serializationContext, AsyncCallback asyncCallback, Object asyncState)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginProcessCore(Message requestMessage, WSTrustRequestSerializer requestSerializer, WSTrustResponseSerializer responseSerializer, String requestAction, String responseAction, String
    trustNamespace, AsyncCallback callback, Object state)
    System.IdentityModel.Tokens.SecurityTokenValidationException: ID4070: The X.509 certificate 'CN=Me, OU=People, O=acme., C=com' chain building
    failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
    at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
    at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
    thx
    Stef71

    This is perfectly correct on my case I was not adding the root properly you must add the CA and the ADFS as well, which is twice you can see below my results.
    on my case was :
    PS C:\Users\administrator.domain> $root = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
    cer\SP2K10\ad0001.cer")
    PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "domain.ad0001" -Certificate $root
    Certificate                 : [Subject]
                                    CN=domain.AD0001CA, DC=domain, DC=com
                                  [Issuer]
                                    CN=domain.AD0001CA, DC=portal, DC=com
                                  [Serial Number]
                                    blablabla
                                  [Not Before]
                                    22/07/2014 11:32:05
                                  [Not After]
                                    22/07/2024 11:42:00
                                  [Thumbprint]
                                    blablabla
    Name                        : domain.ad0001
    TypeName                    : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
    DisplayName                 : domain.ad0001
    Id                          : blablabla
    Status                      : Online
    Parent                      : SPTrustedRootAuthorityManager
    Version                     : 17164
    Properties                  : {}
    Farm                        : SPFarm Name=SharePoint_Config
    UpgradedPersistedProperties : {}
    PS C:\Users\administrator.domain> $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
    cer\SP2K10\ADFS_Signing.cer")
    PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "Token Signing Cert" -Certificate $cert
    Certificate                 : [Subject]
                                    CN=ADFS Signing - adfs.domain
                                  [Issuer]
                                    CN=ADFS Signing - adfs.domain
                                  [Serial Number]
                                    blablabla
                                  [Not Before]
                                    23/07/2014 07:14:03
                                  [Not After]
                                    23/07/2015 07:14:03
                                  [Thumbprint]
                                    blablabla
    Name                        : Token Signing Cert
    TypeName                    : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
    DisplayName                 : Token Signing Cert
    Id                          : blablabla
    Status                      : Online
    Parent                      : SPTrustedRootAuthorityManager
    Version                     : 17184
    Properties                  : {}
    Farm                        : SPFarm Name=SharePoint_Config
    UpgradedPersistedProperties : {}
    PS C:\Users\administrator.PORTAL>

  • Not able to open office documents from SharePoint site using Forms auth on a Mac with Office 2011

    I posted the same question on the Mac Office forum (http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/not-able-to-open-office-documents-from-sharepoint/7fba517b-ebd1-4e90-a54a-c70c5f035146?tm=1418836613595) but figured it's probably more
    of a SharePoint question so I'm going to try here as well.
    We just discovered an issue where a user logs into a SharePoint site using Forms based authentication.  When clicking on an Office file they get
    'Sorry, this site hasn't been shared with you' message:
    The user can download the file and can also open the file within the browser (Office Web apps).  This SharePoint site is on a Web app that uses mixed authentication (forms for external partners) and Windows/Kerberos for internal employees.
     When logging into this same site as an internal user I am able to open the file just fine.
    I checked the 'Microsoft Document Connection' settings and selected and deselected 'Enable Basic Authentication' and neither helped.  
    I also tried to add the site URL under 'Microsoft Document Connection' -> Add connection -> Connect to a SharePoint site.  When I put the site URL in and click 'Connect', I get an error saying that 'Only connection to SharePoint or OneDrive
    servers are supported' message.  If I try the same thing as an internal user using Windows/Kerberos authentication I am able to connect to the site just fine.
    Any ideas??

    Hi Szamir,
    As you are using Form Based authentication to open the documents from SharePoint site, I recommend to check the things below:
    Make sure that the user has permission to view the documents in the site.
    Please select "Sign me in automatically" when you sign in the login page.
    More references:
    https://social.technet.microsoft.com/Forums/en-US/ae8cc886-c362-4709-8575-07d339144714/not-able-to-open-microsoft-office-documentsdocxxls-etc-from-document-library-in-a-fba-site-in?forum=sharepointgeneralprevious
    http://manojvnair.blogspot.com/2011/06/login-prompt-while-opening-office.html
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Issues with Office 2010 and Acrobat Pro 8

    Good Day All;
    We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
    Any comments would be helpful
    Regards
    Chomp

    Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
    Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

  • SharePoint foundation 2010 workflow performance issue

    I need clarification for the below issue.
    I have designed state machine approval workflow through VS2010.
    It was worked fine for 3 months and now it is taking long time for each level of execution.
    I have checked the running workflow instances in site, it is around 1800 instances for each sub site.
    Application: SharePoint Foundation 2010                                                                              
    Farm configuration
    Web server
    Application Server
    Database Server
    Processor
    Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
    Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
    Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
    RAM
    8 GB
    8 GB
    14 GB
    OS
    Windows Server 2008 R2 SP 1
    Windows Server 2008 R2 SP 1
    Windows Server 2008 R2 SP 1
    Anandhan.S Remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

    I have done the below configuration in production servers. Still the problem exists.
    System took around 13 hours+ to proceed to next approver. Suggest some ideas to increase workflow performance.
    Decreased DB server memory configuration
    (Database server)
    Maximum memory in SQL server reduced from
    10GB to 8GB.
    Increased Workflow throttle configurations
    (Application & Web server)
    PS C:\Windows\system32> stsadm -o getproperty -pn
    workflow-eventdelivery-throttle <Property Exist="Yes" Value="150" />
    (Default value is 15)
    PS C:\Windows\system32> stsadm -o getproperty -pn
    workitem-eventdelivery-batchsize <Property Exist="Yes" Value="150" />
    (Default value is 100)
    PS C:\Windows\system32> stsadm -o getproperty -pn
    workflow-eventdelivery-timeout <Property Exist="Yes" Value="10" />
    (Default value is 5)
    PS C:\Windows\system32> stsadm -o getproperty -pn
    job-workflow -url http://myweb:1333 <Property Exist="Yes" Value="Every 10 minutes between 0 and 30" />
    (Default - Property Exists = “No”)
    Site collection analytics
    Sub-Site1: Total running workflow instances: 302
    Sub-Site 2: Total running workflow instances: 58
    Sub-Site 3: Total running workflow instances: 1234
    Sub-Site 4: Total running workflow instances: 2
    Sub-Site 5: Total running workflow instances: 2306
    Sub-Site 6: Total running workflow instances: 512
    Sub-Site 7: Total running workflow instances: 1631
    Sub-Site 8: Total running workflow instances: 7
    Sub-Site 9: Total running workflow instances: 38
    Sum of workflow instances from all sites:
    6090….
    Farm configuration
    Web server
    Application Server
    Database Server
    Processor
    Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
    Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
    Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
    RAM
    8 GB
    8 GB
    14 GB
    OS
    Windows Server 2008 R2 SP 1
    Windows Server 2008 R2 SP 1
    Windows Server 2008 R2 SP 1
    Anandhan.S Remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

  • Sharepoint Foundation 2010 compatibility with SQL Server 2014

    Due to a requirement to use Sharepoint without Active Directory access.  I am trying to find explicit confirmation whether Sharepoint Foundation 2010 is compatible with SQL Server 2014.  I have seen that Sharepoint Server 2010 and 2013 are compatible
    with SQL Server 2014 as of CU 1 (released in April).  But there is no mention of Sharepoint Foundation.
    This chart is great except it doesn't mention whether the Foundation versions are supported.
    http://msdn.microsoft.com/en-us/library/gg492257.aspx
    Thanks.

    Note that that is for the Reporting Services component, but not necessarily for the SQL Database Engine component (which comes from the SharePoint Product Group, rather than the SQL Product Group). I haven't seen any confirmation that SharePoint 2010 is
    supported at all with SQL 2014 as a Database Engine.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Sharepoint foundation 2010 integrate it with ssrs

    hello,
    I am integrating sql server and sharepoint foundation 2010 server both are installed in different pc,
    First i have installed sql server in  machine 1 ,
    second i installed sharepoint foundation 2010 in machine 2
    with complete mode,
    third i installed sharepoint foundation 2010 in
    machine 1 for minimal installation with complete mode,
    and integrated ssrs.
    Its working fine.
    But i need to know whether we can install sharepoint foundation 2010 standalone mode in
    machine 1 which is a sql server.
    I hope this topic might be help full to many people's.
    thanks
    regards
    krishnakumar

    Hi krishnakumar,
    The Short Answer: YES
    The Long Answer: The report server instance cannot use the SQL Server Express Edition for its database. However, the SQL Server Express Edition instance that is installed by the SharePoint product or technology can exist side-by-side with other Database
    Engine editions that you might also install. For more information about edition requirements for the report server database, see
    Creating a Report Server Database.
    Reference:
    http://technet.microsoft.com/en-us/library/bb677368(v=sql.105).aspx
    Cheers,
    -Ivan

  • Microsoft sharepoint foundation 2010 encountered an error during setup. One or more required Office components failed to complete successfully

    Dear
    I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
    then to finish the installation get the following message"microsoft
    sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
    Operating System: Windows Server 2012R2
    Prerequisites: OK
    SharepointFoundation 2010sp2
    Many thanksforyour help
    part of LOG:
    01/16/2015 00:37:11  1  INF          Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
    01/16/2015 00:37:11  1  INF          Entering function RegistryHelper.RegistryHelper
    01/16/2015 00:37:11  1  INF            The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
    01/16/2015 00:37:11  1  INF          Leaving function RegistryHelper.RegistryHelper
    01/16/2015 00:37:11  1  INF          Entering function RegistryHelper.GetStringValue
    01/16/2015 00:37:11  1  INF            Entering function RegistryHelper.GetValue
    01/16/2015 00:37:11  1  INF            Leaving function RegistryHelper.GetValue
    01/16/2015 00:37:11  1  INF          Leaving function RegistryHelper.GetStringValue
    01/16/2015 00:37:11  1  INF          The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found.  This means that either
    the server is not joined to a farm or a central admin site has not been created in the farm yet.
    01/16/2015 00:37:11  1  INF          Entering function StringResourceManager.GetResourceString
    01/16/2015 00:37:11  1  INF            Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
    01/16/2015 00:37:11  1  INF            Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
    Application has not been created yet.  To create one, use the SharePoint Products Configuration Wizard.  Do you want to launch the configuration wizard now?
    01/16/2015 00:37:11  1  INF          Leaving function StringResourceManager.GetResourceString
    01/16/2015 00:37:11  1  INF          Entering function PsconfigMessageBox.ShowMessageBox
    01/16/2015 00:37:11  1  INF            Entering function StringResourceManager.GetResourceString
    01/16/2015 00:37:11  1  INF              Resource id to be retrieved is Branding for language English (United States)
    01/16/2015 00:37:11  1  INF              Resource retrieved id Branding is SharePoint Products Configuration Wizard
    01/16/2015 00:37:11  1  INF            Leaving function StringResourceManager.GetResourceString
    01/16/2015 00:37:23  1  INF          Leaving function UserInterface.ShowCentralAdmin
    01/16/2015 00:37:23  1  INF        Leaving function UserInterface.WarmUp
    01/16/2015 00:37:23  1  INF        Entering function TaskDriver.Stop
    01/16/2015 00:37:23  1  INF          Entering function TaskDriver.OnTaskDriverStop
    01/16/2015 00:37:23  1  INF            Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, 
    01/16/2015 00:37:23  1  INF            Entering function TaskDriverStateChange.Enter
    01/16/2015 00:37:23  1  INF              Acquiring the writer lock to change the state
    01/16/2015 00:37:23  1  INF              Current state of the task driver is neverrun.  You want to change it to stoppedrunning
    01/16/2015 00:37:23  1  INF              Changed state of the task driver to neverrun
    01/16/2015 00:37:23  1  INF              Released the writer lock to change the state
    01/16/2015 00:37:23  1  INF            Leaving function TaskDriverStateChange.Enter
    01/16/2015 00:37:23  1  INF            Entering function TaskDriver.FireOnTaskDriverEvent
    01/16/2015 00:37:23  1  INF              Entering function UserInterface.TaskDriverEventHandler
    01/16/2015 00:37:23  1  INF                Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message 
    01/16/2015 00:37:23  1  INF                There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
    01/16/2015 00:37:23  1  INF              Leaving function UserInterface.TaskDriverEventHandler
    01/16/2015 00:37:23  1  INF            Leaving function TaskDriver.FireOnTaskDriverEvent
    01/16/2015 00:37:23  1  INF          Leaving function TaskDriver.OnTaskDriverStop
    01/16/2015 00:37:23  1  INF        Leaving function TaskDriver.Stop
    01/16/2015 00:37:23  1  INF        UnLocking the task driver for exclusive use while warming the driver up
    01/16/2015 00:37:23  1  INF      Leaving function TaskDriver.WarmUp
    01/16/2015 00:37:23  1  INF      Entering function PsconfigApplicationContext.ClosePsconfigApplication
    01/16/2015 00:37:23  1  INF        The psconfig ui application is closing
    01/16/2015 00:37:23  1  INF        We have do not have a main form, thus the application has been told to close prior to showing the ui at all
    01/16/2015 00:37:23  1  INF      Leaving function PsconfigApplicationContext.ClosePsconfigApplication
    01/16/2015 00:37:23  1  INF      Return code indicates a success
    01/16/2015 00:37:23  1  INF    Leaving function PsconfigUserInterfaceMain.Main

    Hi Jose,
    When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
    Run, from admin command prompt:
    Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
    you can read more here:
    http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
    Stacy www.sharepointpapa.com

  • Windows 2012 to Windows 2012 R2 Inplace with Sharepoint Foundation 2010 SP2 (4.0.7116.5000)

    I found than Inplace update from 2012 to 2012 R2 are supported. I also found 2012 R2 will support SharePoint Foudation 2010 with SP2 (4.0.7116.5000).
    But I cannot find if we perform an Inplace update from a Windows 2012 Server running SharePoint 2010 (Sp2) to R2 will be successful.
    As anyone done that?
    Thanks.
    Real
    Réal Doré

    Hi ,
    On Windows Server 2012 R2, Microsoft supports only the SharePoint Server 2010 SP2 slipstream media configuration and not the RTM version of that configuration. For full SharePoint functionality and support, you must have the February 2014 cumulative update
    (CU) or a later CU installed.
    Additionally, only a new SharePoint Server 2010 SP2 slipstream installation that has the February 2014 CU or a later CU installed is supported on Windows Server 2012 R2. Microsoft
    does not support a Windows in-place upgrade for this scenario.
    For your scenario, I suggest you create a new SharePoint Foundation 2010 with SP2 on Windows Server 2012 R2, then migrate the content to new SharePoint 2010.
    More information, please refer to the link:
    http://support.microsoft.com/kb/2724471/en-us
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • SharePoint Foundation 2010 Workspace problem

    I've installed sharepoint foundation 2010 in a Windows server 2008 R2 standard environment. I've added some site collections and added some libraries to the site pages. Ive put in various permissions and groups and tested no problem using
    Sharepoint workspace 2010 on a Windows 7 32 bit client.
    But when I do a remote desktop connection to another server with 2008 R2 standard installed I can't get Sharepoint workspace 2010 to work properly. It opens an account and connects to my sharepont site but in the pane to the right where I would normally
    see library documents listed all that comes up is an error stating - Error: Cannot Display Tool.
    Also if I try to sync I get the following error:-
    The parameter is incorrect
    HResult: 0x80070057 (0x386d7565)
    Process: Groove.exe (ID:17936(0x00004610))  
    No amount of googling has found a solution, no similar postings had any resolutions.
    Any help would be much appreciated
      

    My apologies. I'd focused on the error and hadn't adequately read the information you provided on the environment. The issue is probably with using SharePoint Workspace on the remote computer, not with SharePoint Foundation.
    Here is what I understand you to be doing:
    You use Remote Desktop to connect to the Windows Server 2008 R2 computer, where you log in with your domain account, which is a member of the local Users group.
    On the remote computer, you start SharePoint Workspace.
    On the Launchbar, you click New, click SharePoint Workspace, select your site, and then click
    OK.
    The workspace is created and appears (from the progress bar) to download content.
    When you click Open Workspace, no content is displayed. Instead, you see the "Cannot Display Tool" error.
    Is that correct?
    There are three areas where SharePoint Workspace is complicated to run remotely:  
    Where SharePoint Workspace will be run by a user other than the one installing it, it must not be lauched during the installation. This seems the most likely to be the issue, as we have seen the same failure and error at a customer site where several
    users had been given a computer image created on a computer where SharePoint Workspace had been launched before image creation.
    Only one user should run SharePoint Workspace (Groove.exe) at a time. (Sometimes multiple instances work, but it's not reliable.)
    You need to have a local profile on the computer which is running SharePoint Workspace. SharePoint Workspace is not supported with Roaming or Temporary profiles. Usually, this problem would prevent you from starting SharePoint Workspace, but some
    environments with custom permissions can lead to other errors.
    SharePoint Workspace uses the current user's permissions for SharePoint server access, In the case of Forms-Based authentication, it prompts for credentials at workspace creation, but then uses the credentials in the active browser session when opening
    the workspace. I think this could only be related to your problem if you are logged in as another user in your browser, and that user has access to some, but not all, of the site your workspace connects to.

  • SharePoint Foundation 2010 : Changing language settings

    My employer would like to offer our clients the ability to specify a preferred language in-which to use our SharePoint solution.
    I.e. Clicking on a national flag on the dashboard will consequently display the system text within the associated language.
    Ideally this feature will be bespoke to each given user. I.e. Default language will be English. Each user thereafter will be able to specify their unique user session within their desired language.
    Is it possible to configure our solution to offer this feature? If so, how?
    We are currently using SharePoint Foundation 2010.
    Many thanks in advance.
    David
    Senninha010

    The ability to display prompts in a different language in SharePoint 2013 is called the
    Multiple Language User Interface (MUI).  The issue with what you are attempting is not building an interface to enable or disable a specific language in the MUI.  The problem is that the available languages are completely dependent on whether
    a SharePoint Language pack for that language has been loaded or not.  If they have been loaded then its just a matter of writing your application to take advantage of Localization support through the use of resource files.  But localizing your application
    without loading the SharePoint language pack for that language probably won't work well.  here's a couple articles on the MUI and localization.
    http://office.microsoft.com/en-us/sharepoint-server-help/introduction-to-multilingual-features-HA101867790.aspx
    http://msdn.microsoft.com/en-us/library/office/fp179919(v=office.15).aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Sharepoint Foundation 2010 - Searching for a commentBox web part

    Hello!
    Im sort of new to Sharepoint and i have been working with it in two weeks now. Im currently an full controll user on the site my company is using and im also using Sharepoint Designer. The site is running on Sharepoint Foundation 2010
    I have been digging for sometime after a web part that enables users to leave a message on the home page. I want the same fuction as i get when i create a BlogSite (there you can create posts and comments).
    My first thought was to find a Web Part which will allow me to do this, but i was sort of wrong. I found some examples like this: social.msdn.microsoft.com/Forums/en-US/newthread?category=sharepoint&forum=sharepointgeneralprevious
    Im still trying to make that work but so far no luck.
    So i was wondering if there is a better way to create a function that will allow users to create posts/comments etc?
    Thanks for any help!
    /Patrik!

    Create a blob site template as below:
    http://office.microsoft.com/en-in/sharepoint-foundation-help/create-a-blog-HA010378201.aspx
    http://technet.microsoft.com/en-us/library/ff607540%28v=office.14%29.aspx
    http://office.microsoft.com/en-in/sharepoint-foundation-help/a-preview-of-the-sharepoint-foundation-2010-site-templates-HA101889597.aspx
    If this helped you resolve your issue, please mark it Answered

Maybe you are looking for

  • Error in MIRO

    Hi While posting MIRO, we are getting the following error- " Tax Code V1 Country IN does not exist in Tax Procedure ZAXINN". We are on version 4.7, using TAXINN as the tax procedure. We have maintained the condition types as well as assigned the tax

  • Adding a new reciever to an existing integration scenario of conf in PI7.0

    Hi SapAll. here i have got a requirement to add one more reciever to an existing integration scenario in Integration Directory(Configuration). this Integration scenario is for sending the idoc MATMAS.MATMAS05 From 5 Different SAP-R/3 Systems to 2 Rec

  • Best way to upload form into WDA

    I am working on WDA containing Adobe Interactive form with Vendor Payment request. WDA will be called by workflow every time an approver has to approve the request. The form will reside at URL. What is the best way to upload an Adobe form into WDA? I

  • Automounting with HAL

    I would like my DVDs/CDs, floppy disks, and USB devices to be mounted when connected, and I know HAL is used to do this. I headed over to the Wiki, and saw this ominous line: NOTE: this is deprecated from hal => 0.5.10 If it's depreciated, what's the

  • CRM Sales Order to SAP ECC troubleshooting

    Hi, I'm trying to replicate SAP CRM Sales order to SAP ECC, I have matched (transaction and document type, item categories). But when I create sales order in CRM, the following error occurs in the Web UI: Transmission log SALES_HEADER_IN has been pro