Issues with PSE 11, 12 and now 13....and ZERO SUPPORT FROM ADOBE...what a shocker

PSE 11 and 12 just crash non stop after i accepted an Adobe Air update. i am right in the middle of trying to create 29 custom soccer porters for HS seniors (all volunteer work, this is not a paid job). Adober Support were absolutely USELESS! Claim PSE 11 AND 12 are no longer suported.
In desperation I purchased PSE13 to try and start fresh. i converted the catalog...but now, NOTHING PRINTS! It has bogus printers in the dropdown and I get an error message - when selecting my real printer..that there is a default printer error
please help!

Is your default printer set properly in Windows in general?  Do you have several old printer drivers that are for printers that are no longer connected?
And, I wonder if it would help to reset PSE’s preferences, by holding down Ctrl-Alt-Shift as you start PSE until you get the question about whether to delete/reset PSE’s preferences, then pick Yes.

Similar Messages

  • Just downloaded Mt Lion on to my imac and now cannot access my photos from adobe cs4

    just downloaded mt lion onto my imac and now i cannot access my photos from adobe cs4

    Hope you made a Backup?
    I work with Cs 5 on mac os X.6.8
    and will wait a lttle bit to install mountain Lion.
    I´ve heard too much about technical Problems.
    I loaded MT and make a disc image from it with right mouse klick and safe it on my seperate disk.
    I will put MT on an emty disk to test it, but I can wait.
    Never change a winning Team ;-)
    I wish you fix that Problem next time, sorry I can´t help in this case.

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

    I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

    Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
    Just go to the Library module, search for the desired photos, and resume working on these photos.

  • I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

    I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

    I did that and nothing changed half my songs still have examination marks beside them
    I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

  • I downloaded Adobe Acrobat XI Pro - I signed in and now all I get is the Adobe Download Assistant with a prompt to keep downloading the program or help page.

    I downloaded Adobe Acrobat XI Pro - I signed in and now all I get is the Adobe Download Assistant with a prompt to keep downloading the program or help page. How can I launch the actual program and not the Assistant?
    Under the download or application file I only have the Assistant program

    Moving this discussion to the Acrobat Installation & Update Issues forum.
    Isabellasf have you ran the installation files which were downloaded?  By default they are downloaded to the download folder within your User folder.

  • Issue with PSE 9 Editor

    Running PSE 9 on a new iMAc with 8 Gig memory, 1 TB hard drive.  When trying to save an edited file, the Editor consistently becomes unresponsive when I try to close the saved file requiring that I force Editor to close.  Not only with not Editor close the saved file but the Editor cannot be closed normally.

    I appreciate the help, I found out how to change paper type and it seems to work great.  The remaining question, when I've finished editing an image and attempt to "Save" or "Save As" the system shows a box "Adobe Photoshop Elements 9 quit unexpectedly".  If I go to "Reopen" it reopens the PSE at the organizer level and hasn't saved the image.  Also at this level, "Save" is grayed out and unavailable.  I sure appreciate someone that seems to know a lot more than the "Techs" at Adobe.Don
    Date: Thu, 7 Apr 2011 20:40:38 -0600
    From: [email protected]
    To: [email protected]
    Subject: Issue with PSE 9 Editor
    The second thing, opening the print dialog box does not open the same one as Windows, and allows no selection of paper type.
    That is just a difference between macs and windows. On a mac, you choose the paper and print quality in the OS X system print window that opens after you click the Print button in the PSE window:
    http://forums.adobe.com/servlet/JiveServlet/showImage/64219/ScreenSnapz.jpg
    If you only have the little stub window, click the triangle to the right of the printer's name to expand the dialog box to see all the menus.
    >

  • I installed snow leopard which I now realise that it was the wrong one because it came out before my laptop and now it won't changed from the grey screen with the apple on it how do I fix it ???

    I installed snow leopard which I now realise that it was the wrong one because it came out before my laptop and now it won't changed from the grey screen with the apple on it how do I fix it ???

    MacBook Pro
    Apple - Support - MacBook Pro
    Mac OS Version builds
    When did yours come out? what does the above show as model and minimum build?
    You should have yoru OEM OS X DVD, not one from another Mac, or retail, though the last retail OS X DVD was a year ago 10.6.3.
    If it installed, I don't see an issue unless the drive had corrupt directory etc.
    What you need to do is repair your boot drive or restore from backup.

  • Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    TarahCurrie Sep 10, 2014 3:48 PM
    Restore From Time Machine Backup
    Reinstall OS X
    Get Help Online
    Disk Utility
    MacBook Pro, Mac OS X (10.5.8)
    You are running 10.5.8
    Did you try booting off your Install disk holding the c key down.  From here you can get to the drop down menu just a few clicks in (you are not going to install) and run  the Disk Utility>Repair Disk.  See if it will let you do this.

  • HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • Issue with VPN configuration in Windows 2008 r2 and 2012 Servers.

    Hello ,
    I hope you can help me to fix this issue, it's been 5 days since I a, trying to configure VPN in your 2008 and 2012 Servers. On both platform  (2008 and 2012) I am getting same error while configuring VPN (after role installation). 
    "Unable to load C:\Windows\System32\iprtrmgr.dll". So, I have removed IPv 6 entry from the registry and now able to start server (not sure what configuration it took automatically).  I tried to disable "Routing
    and Remote Access" service and got the same error while enabling "Routing and Remote Access" is running but VPN is still not functioning properly). 
    I am getting following error,
    ================================================
    Errors under the Event viewer (Remote access)
    1) --->>    CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user 10.0.0.1\chetan connected from 10.0.0.1 but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password
    combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.
    2) ----->>   CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user connected to port VPN3-127 has been disconnected because the authentication process did not complete within the required amount of time.
    Errors under the Event viewer (Remote access)
    3) ---->>  Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    ================================================
    I am using (MS-CHAP v2) + EAP (Authentication Method).  Please let me know if you need any additional information. 
    Thank you,

    I Guess this thread is not related to SQL Server .User is facing issue because of network or may be due to OS.I guess I will move this into windows forum.
    Moderators please move to Network forum
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

    I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
    Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

    Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
    Sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again
    If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
    If that doesn't work, restart your router and reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

    I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

    To get the orange FF tab, go to View > Toolbars > Menu Bar. This should uncheck the menu bar and give you the orange button.
    Panorama is a box made of 4 grey rectangles that should be on the far right, if it isn't after you enable the orange FF tab, right click on anywhere on a tool bar that doesn't have anything on it, and you should get a menu with a list of your tool bars that you can check and uncheck. go down to customize at the very bottom and it will open a window with all your buttons. Find the panorama/tab groups button and drag it onto the tool bar of your choice.
    to pin a tab as an app, right click on it; it's an option in the right-click menu.

  • When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

    When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
    I have attached the url of the unwanted site.

    Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

Maybe you are looking for