Issues with recently installed quicktime

I will admit having the occassional crashing issue with premiere, but since in installed the newest version of quicktime (I believe it's 7.4) premiere holds out for about an HOUR maybe! if I'm lucky, usually if i attempt anything audio editing, it crashes and I'm back to square one.
it seems to hold for exporting files (through the media encoder or to AVI) but the second one attempts to do any editing, extending or shortening clips, down it goes with that lovely "Premiere has experienced an unknown error and will attempt to save your project" (Which it doesn't).
Given I'm working with a large project it is annoying for the 20 minute pause for it to re-load, only to have it go down a few minutes later.
It doesn't matter the scene/sequence I'm editing.
I do need quicktime for some of the projects I'm working on right now, but if it's the cause of this issue...I'm not sure sure it's viable.
I've uninstalled it, and I'm going to give it a run for the night see if that helps, but if it doesn't, any ideas?
Thanks in advance.
H.R. Crystal

Thanks Jon. I'm going to go download and install 6.5.2 now.
I JUST LOVE! how everyone tells you to have the most up to date Quicktime, but ack! seems to cause issues.
I'll see if this fixes my issues.
Appreciated the note on the version.

Similar Messages

  • Widgets issues with recent install of Mountain Lion on my iMac.

    Since installing Mountain Lion my screen periodically locks up an shifts to the right. I noticed along the left a charcoal background with large dot pattern was showing while the screen was shifted and locked to the right. Then a few times the widgets screen popped up on its own and I realized the background matched what I was seeing when the lock ups happen (I have never used the widgets). So it appears the Widgets screen keeps trying to launch spontainiously. I did notice the Fetch widget had an alert on it and with some investigation found that Fetch Works no longer had a widget for Mountain Lion, so I just deleted it. This I thought fixed the bug but now today the shifting and locking up has started again.  I did take the machine in to have a Genius run a diagnostic because of the hard drive issue with the iMacs but he said all looked fine and reinstalled Mountain Lion while I was there to see if that helped.. but it did not. Has anyone else run into this? If so, were you able to fix it? it actually just happened twice while I was typing this and I had to sit and wait for it to not be locked up so I could complete...

    You can use the Mountain Lion USB disk that you created or you can press Command and R keys on boot, but it will download OS X Mountain Lion from the Internet

  • SSH/PAM login issue with fresh install: edit wiki or raise bug?

    I recently encountered an issue while setting up Arch on a headless server, and was wondering if I did something stupid, the documentation should be improved or I found a bug.
    The problem was that after adding a new non-root user, I couldn't SSH into that user account. I could still login to root via SSH fine. After some research and playing around I found I was able to login by setting UsePAM to no in /etc/ssh/sshd_config. I later realised that this was because I set the login shell for this account to /usr/bin/bash, and not /bin/bash. The problem is that currently /usr/bin/bash is not in /etc/shells, and the default /etc/ssh/sshd_config sets UsePAM to yes.
    As this is a new default install, and I followed the wiki during the install, I feel that this should have been documented somewhere. I don't mind changing the wiki or reporting this as a bug, just I'm not sure which is the correct course of action:
    1. Should I have known to use /bin/bash and not /usr/bin/bash, i.e. the login shell needs to be in /etc/shells? => edit the wiki [1]
    2. Should /usr/bin/bash be in /etc/shells? => raise a bug against filesystem [2]
    Related:
    [1] https://wiki.archlinux.org/index.php/Gr … management
    [2] https://projects.archlinux.org/svntogit … unk/shells
    [3] https://bugs.archlinux.org/task/35724
    [4] https://bbs.archlinux.org/viewtopic.php?id=166464
    Last edited by quigybo (2013-11-02 17:34:42)

    The wiki should be changed. /bin/bash is the correct entry in the list of shells.
    I cannot, however, remember off hand in which context this came up. I just remember this was the developers' response. So I can't point you to evidence to confirm even though I do know that is the correct answer.
    EDIT: https://bugs.archlinux.org/task/33677
    https://bugs.archlinux.org/task/33694
    Last edited by cfr (2013-11-03 03:56:49)

  • Issues with clean install of Snow Leopard in Leopard MacBook

    Hi all,
    This is the sequence of events:
    1) MacBook from 2007, running Leopard.
    2) Got Snow Leopard, did the install on top of the existing OS, just as an "update".
    2) After machine restarts, several issues were detected, apparently all OS related: Finder crashed, Apple Mail didn't even open, etc.
    3) Download software update from Apple.com (for "performance improvement"). Installer itself crashes!! Can't install update.
    4) Decided to go for a clean install with complete restore of hard drive
    5) Put in Snow Leopard DVD, boot from it, erase and format hard drive. Got a "Can´t install... contact the manufacturer" error.
    6) Don't have my original Leopard OS DVDs at hand at the moment, but will try that later.
    Question is: to do a clean install, after restoring the hard drive, do I need to install Leopard first, and only after that Snow Leopard?
    (I tried installing Leopard from the DVDs of another MacBook (2008), that didn´t work either. I gather it could be small hardware differences, so I'm still hopeful for when I try with my original restore DVDs...)
    Any help will be greatly appreciated!! I mean, this is was supposed to be a no-brainer... :-/

    a brody wrote:
    1. You have some peripheral or RAM that is not compatible with the installation.
    See my FAQ*: http://www.macmaps.com/badram.html if there are no peripherals attached. You need a minimum of 1 GB of RAM to install Snow Leopard.
    1. No peripherals. RAM is only what came with original machine. Have 2GB.
    a brody wrote:
    2. Your machine has some hardware issue preventing installation:
    http://support.apple.com/kb/HT1509
    2. Will verify this later with the original installation CDs. It would be bad news... my MAC was running completely fine before Snow Leopard!!
    a brody wrote:
    3. You are using the wrong installer disc. For a 2007 machine, only a copy of Snow Leopard which looks like * that does not say Upgrade or DropIn or OEM will work.
    3. I have an Install DVD, just like that one.
    Thanks a lot for the input! Greatly appreciated.

  • Re: Satellite U305-S7477 - issue with clean install from recovery disks

    Im trying to do a clean OS install of Vista onto a new hard drive, the install runs correctly but at the end, instead of it requesting me to create a user id and password as the machine does at first boot up when new, it shows a login for administrator with a message that the administrator account has been disabled, and another to input a pre-existing user name and password, which I do not have since this is a clean install.
    Does Toshiba want me to only run the recovery on top of a pre-existing OS install? That would be quite a limitation, and would prevent one from recovering their machine after a hard drive dies.
    Any thoughts? I did look thru the docs for a default password, but if it's there I didn't find it.
    Thanks in advance!

    Hello
    To be honest your issue is strange to me. The fact is, for operating system installation you can use either Microsoft installations DVD or Toshiba recovery DVD. In both cases when installation is almost done you must enter your username and password (optional). There is no difference at all.
    I have done recovery installation many times under WXP and Vista. No difference at all. Username must be entered always and I didnt notice such issue as described in your posting.
    So please try to install OS again and be careful with each installations step. All recovery installations images are tested and I cannot imagine Toshibas people can oversight something like this.

  • Issue with default install of SOA suite under Windows

    Hello,
    I installed SOA Suite without error, using the defaults of the Basic Installation.
    When I start the SOA Suite, it starts up without error, but reports that ASG is Status=Down
    When I try to create an Integration Server in JDeveloper, and test it, everything works, with the exception of the ESB Server:Fail, which in the details is listed as:
    ESB Connection, Not Run
    Can anyone explain these behaviors (ASG Status=Down and ESB Connection = Not Run)? Are these normal based on not installing products from the Advanced options? I'm in the process of an evaluation and I don't want to go too far down a path if my system is already somewhat broken.
    Thanks.
    --T
    Thank you very much.

    The ASG down is normal - it is not causing the other issue you have.
    The JDev integration server connection error (ESB not run) is unfamiliar to me. Make sure you have created the Application Server connection properly (choose standalone). The Test Connection button for the Integration Server connection shows you status for the Application Server, the BPEL Server, and the ESB Server - what does it say for each of these?
    Heidi.

  • GUI issues with newly installed IllustratorCC.

    We've just purchased and installed Adobe Creative Cloud for our shop. Intallation went smoothly, but usage is not. Anybody experiencing these issues?
    OSX 10.6.8
    • Outline/Preview does not work dynamically. (without acivating a new tool or zooming in/out)
    • Fit Artboard in Window does not work dynamically.
    • Separations Preview does not work dynamically.
    • Cannot quit application with unsaved document open.
    • Cannot close unsaved document.
    • Revert closes document.
    Thank you for your time.
    ~dannO
    UPDATE:
    Possible OS issue? Testing with OSX 10.7.5 seems to work fine. Why does OSX 10.6.8 use Adobe Application Manager and OSX 10.7.5 use Adobe Creative Cloud as gateways to sync and login to CC? Unable to sync settings withing illustrator preferences on OSX 10.6.8.

    Problem solved!
    Ensure that Tahoma and Verdana are active in your system fonts on OSX 10.6.8!
    ~dannO

  • Sound issues with recent 8.3 update for Ipad mini 2

    So recently I purchased an Ipad mini 2 32 gb tablet. I saw there was an software update and processed it right away. That completed fine but what I found that when I was running the new Mortal Combat game there was this occasional crackling sound that was very annoying. I also experience it on some Youtube videos. So I decided to return the unit thinking there was defective hardware. So I got the replacement and it worked just fine at 8.2 I decided not update the software for a week and see what happened. Well it ran Mortal Combat just fine with no crackling. It also ran youtube videos with no problems. So I thought ok, looks like I had a bad unit. Let me load up 8.3 now and I should be good. Well just what I was hoping would not happen, did. The crackling returned and I have very frustrated now. What can I do? Does apple or any one else know about this issue?

    I just responded to you on this other thread that references this post: Re: iOS 8.3 a disaster
    Happy to try to help take a look!

  • Issue with newly installed harddrive

    My original harddrive crashed reacently, the odd thing was that it worked sometimes when I booted, but after a while the system froze again.
    I bought a new harddrive which I was able to install macos onto. After a few hours of usage I experienced the same problems with this drive, and now I only get the question mark screen when I boot.
    What can the issue be here?
    I was at first thinking that the issue was the old harddrive, but now I am thinking that it might be the controller.
    Is there a fix for that, or do I need to buy a new computer all together?

    The SATA cable may be the cause of the problem.
    You can test the hard drive, if you place it in an external enclosure and boot off it while holding the option key at startup.

  • Issues with the install

    Hi, ALL,
    I successfully perform an install the system on my laptop.
    But now I have 2 issues:
    1. I can't become "root" on the installed system. I tried to enter "solaris" as the password - the one from the DVD - it does not work. I tried to not to enter anything - leave password as blank it does not work. And during the install it didn't ask me to change the "root" password. I did make a user with the password, but I can't do anything system-wise.
    2. This laptop has a Broadcom wireless NIC. - BCM4312 802.11b/g LP-PHY. There is no driver for this NIC. Doing some googling, I see there is a driver for Solaris 10 from Broadcom and there was an effort to use an NDISwrapper with Windows driver on Solaris that is from 5-6 years ago.
    Is there any chance to have a working solution right now? Is it possible to try Linux driver from Broadcom's site?
    Thank you.

    Hello
      the root is a role please check this link I think it can help.
    Taking Your First Steps with Oracle Solaris 11
    Installation Considerations - Oracle Solaris 11.1 Release Notes
    --snip --
    Initial Root Password Expires After Live Media Installation
    After a Live Media installation, the root password is initially set to the same password as the user account that is created during installation, but it is created in an expired state. The first time you assume the root role, you should authenticate using your own password. At this point, you will receive a message that the password for the user root has expired, and you will be requested to provide a new one.
    About the NIC driver you can use if it works but it won't be supported as it is not a Solaris one.
    there is and HCL for solaris 11 that can help with your card too
    Oracle Solaris OS: Hardware Compatibility Lists
    Regards
    Eze

  • IPad Air 2 : Issue with re-installing iWork Apps

    Hello All,
    During my recent vacation, I bought an iPad Air 2 (64 GB). Since this was my first iOS device, I used my wife's Apple ID to quickly setup and use.
    On reaching home, I created an Apple ID and made relevant changes on my iPad to reflect my ID.
    But by mistake I deleted/uninstalled one of the iWork Apps, now when I goto App Store, it requests for a purchase. Why? Since iWork Apps are pre-installed on iPad Air 2, shouldn't it allow me to re-install these apps?
    Could you pl help me solve this issue.
    Regards,
    Srinath

    If you originally used your wife's account to activate the iPad then they will be tied to her account, only her account will be able to redownload them for free - though they were preinstalled on the iPad (as it's capacity was 32+ gig), they would have been linked to your wife's account when you activated it.

  • Issues with PXE installing "rebooting"

    I am having this issue, and I am getting confused.
    I am able to F12 into PXE, and this loads the PXE Client, with no issue, but then it gets to the ConfigManager Screen "the first white screen" it reboots back to the beginning.
    I have check all my settings, and I have also press F8, to check to see if I have a IP Address, and here I discovered I had none, so I download "I think I have the right drivers" and install them
    recording to VMware Workstation, I have a        Intel(R) PRO/1000 MT Network Connection
    and here is also my SMSPXE Log.        https://www.dropbox.com/s/d72eww8y4qs87uz/SMSPXE%2031-02-2014.log
    can someone please help me, as I am pulling my hair out.

    this is the question, I think I have as I when to the intel website and downloaded the DOS ROM drivers
    PXE ROM code
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
    and when I try and inport the drivers I am informed
    that it see's the INF files for both Pro100 \ Pro1000 Drivers Oemsetuo.inf
    but then I try to import them I am informed
    \\win08-sccm\Source\Drivers\PXE DRIVERS\Dos\PRO100\DOS\oemsetup.inf
    - The selected file is not a valid Windows device driver.
    \\win08-sccm\Source\Drivers\PXE DRIVERS\Dos\PRO1000\DOS\oemsetup.inf - The selected file is not a valid Windows
    device driver.
     Add drivers to the following packages:
    VMWare Drivers
     Packages will be updated on distribution points.
    so I spoke to a friend to whom informed me that this is a know issue and that I can use the windows 8.1 drivers for the PXE Book, so I download the drivers and inport them with no issues, but the PXE boot still does work.
    Windows 8.1 Drivers =                       
     Win7 and WinServer 2008 R2 Driver
    the win 8.1 drivers go's on with no issues, but the PXE Boot still don't work.

  • Issues with re-installing Itunes.

    A while back some computer error had made Itunes unable to register my ipod. The error information box said that I should un-install Itunes and all related programs, and then re-install them. I have un-installed them, but it won't re-install. why is that? it said that my system wasn't modified. what does that mean? what do i do about it?

    Hello Will,
    I know you said you uninstalled iTunes but if you only uninstalled the application itself and not its components, when you re installed the issue could keep happening. I recommend using this article to uninstall iTunes and its components Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 found here http://support.apple.com/kb/ht1923.
    After that try installing iTunes again and see if the issue is resolved.
    Take care,
    Sterling

  • Issue with step "Installing Operating System"

    Hello, 
    Just wondering if anyone can help me as I've been pulling my hair out for a week over this one. I had my task sequences working fine a couple weeks back and now they fail with this error:
    The execution of the group (Install) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    TSManager 20/03/2015 16:29:21
    1276 (0x04FC)
    Failed to run the last action: Install Operating System. Execution of task sequence failed.
    Incorrect function. (Error: 00000001; Source: Windows)
    TSManager 20/03/2015 16:29:21
    1276 (0x04FC)
    Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767)
    TSManager 20/03/2015 16:29:21
    1276 (0x04FC)
    Task Sequence Engine failed! Code: enExecutionFail
    TSManager 20/03/2015 16:29:21
    1276 (0x04FC)
    Task sequence execution failed with error code 80004005
    TSManager 20/03/2015 16:29:21
    1276 (0x04FC)
    I've googled around and tried a lot of 'fixes' I've found from various sites but nothing seems to have remedied this issue. The only thing that changed (That I can think of) is the IP of the VM was changed to a different one. This seems to be when it started
    failing. All steps leading up to this point seem to work fine. Does anyone have any sugggestions? This is on a newly built, Hyper-v, server 2012 R2, MDT 2013 setup.
    Much Appreciated..!

    It would be helpful to get the bdd.log files to debug the issue.
    Can you upload them to a public site like onedrive and share the link here?
    How to find the right MDT log files (bdd.log/smsts.log) to debug
    problems.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Issues with playing installed games

    Whenever I go to play a game on my HP Touchsmart 300, such as, Dota 2 or anything else that has been installed on my harddrive it tabs out to the desktop every few minutes. Is there anything i can do to fix it?

    Hey,
    It definitely sounds like there maybe some background apps interfering with Dota. Does Dota close out entirely or just minimize (like when using Alt+TAB?). I would definitely try doing a clean boot, then playing once more. If you don't experience the issue any more you may have the cherry pick through your Startup programs and services to see if any are causing this issues. (I would assume any security program that may run a scan would be the first thing to look at).
    Try this out and let us know how things go
    I work for HP. - Consumer Notebook and Desktop Expert
    Please click the white "Kudos" star to say thanks.
    Please click "Accept As Solution" if you found my response helpful.

Maybe you are looking for