Issues with Reorg on a tablespace from DB13

Hello,
System: SAP DB2 on z/OS
When we schedule 'Reorg on one R/3 tablespace' in DB13 for more than 1 tablespace with 5 minute (Say 1st job scheduled at 7:00 and 2nd at 7:05) interval the reorg fails for the second job with the following error.
DSNU180I -XXXA DSNUGUCC - UTILITY IS NOT COMPATIBLE WITH THE REORG TABLESPACE UTILITY
UTILID = PA002631, OBJECT = SY00MAP.QX000001
The object in contention is the temporary QT mapping tables created for online reorg.
The above QX000001 indexspace is used for the first reorg job (07:00) and the same QX000001 ndexspace is picked for the second reorg job (07:05) .
Is there a way to prevent this ?
This issue exists in SAP 6.20 and 7.00 systems
Thanks,
Aravinthan

this means that you had a utility left out there in stopped status. this error probably occurred due to a previous utility that did not complete or failed and was not terminated.

Similar Messages

Issue with Emoji icons when sent from iOS6 to iOS5

Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problem

Hi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

Issue with opening PDF file link from Safari

Hi Everyone,
I got a problem with opening PDF file link from Safari 4.04. Instead of getting a normal pdf content, it shows some weird characters. Not sure it is something wrong with Adobe Reader Plugin or Safari?
I have uploaded a screenshot of the issue in the adobe forum (http://forums.adobe.com/thread/531870). Please help!
Many Thanks,
John

There's nothing wrong, except the fact that you have Adobe Reader installed. You don't need it, so get rid of it; it will only cause problems with Safari. What you're seeing is the contents of the PDF file, rather than having it displayed.
If you want to download a PDF file, you can either Control-click on the link and choose "Download Linked File As…", or you can Option-click on the link for the file and it will be downloaded to your Download folder (usually your Desktop).
If you want to view a PDF file in Safari, you don't need Adobe Reader; Safari is perfectly capable of doing this by itself and has been for years. Adobe Reader will only get in the way and slow everything down.

Paper Type issue with Adobe Standard X printing from browser

I work in IT and have two users who suddenly started having a problem printing PDFs from a browser (IE9). We cannot upgrade the borwser to 10 or 11 because it becomes incompatible with a few of our in house websites. I uninstalled standard and installed Adobe Reader XI and did not experience the same problem, but they are in need of Standard X in order to do their job.
What happens is when the PDF opens in the browser and they go to printer, the default for paper type is High Gloss paper instead of plain or unspecified. This doesn't happen if we open a pdf from the desktop and print and the default for the driver is plain. Yes, we could save the document and then print it, but they feel that takes more time and I have to find out why this is happening. Any help would be very appreciated.
Windows 7 32 Bit PC
Internet Explorer 9

Probable issue with the Firefox is that in the documentation it is poorly worded poorly, JIDS only support FF 17.
What is the issue with IE if that does fix the FF issue?

Anyone have any information about iphone 6 and 6 issues with receiving Unknown caller IDs from pbx systems?

We are seeing any issue with iphone 6 and 6+ phones receiving "Unknown" on the caller id when they receive a call from a PBX system. All other versions of iphones are not having this issue. I have read several forums and it seems to be a carrier issue with the new LTE towers. Has anyone else experienced this issue?

yes its a new issue for me too. Are you a ATT customer? My brother has iphone 6 but with another carrier and has no problems..

Performance issue with view selection after migration from oracle to MaxDb

Hello,
After the migration from oracle to MaxDb we have serious performance issues with a lot of our tableview selections.
Does anybody know about this problem and how to solve it ??
Best regards !!!
Gert-Jan

Hello Gert-Jan,
most probably you need additional indexes to get better performance.
Using the command monitor you can identify the long running SQL statements and check the optimizer access strategy. Then you can decide which indexes might help.
If this is about an SAP system, you can find additional information about performance analysis in SAP notes 725489 and 819641.
SAP Hosting provides the so-called service 'MaxDB Migration Support' to help you in such cases. The service description can be found here:
http://www.saphosting.de/mediacenter/pdfs/solutionbriefs/MaxDB_de.pdf
http://www.saphosting.com/mediacenter/pdfs/solutionbriefs/maxDB-migration-support_en.pdf.
Best regards,
Melanie Handreck

Started having issues with camera raw. cannot access from bridge. Greyed out.

Started having issues with accessing camera raw from bridge. I have CS6 and LR5. Should I attempt to uninstall CS6 and reinstall. I have backup on external hard drive for my photos but will I need to reimport photos after uninstall? Some of the forums are suggesting that my program might be corrupt. Can anyone assist?

This should solve problem. http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

Oracle Weblogic Server 12c, issue with deploying the war created from Wavemaker tool

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Issue with update and purchase app from App Store from Iran

Hi dudes. I have the following issue with app store and iTunes form my country. I have had 1009 ERROR past year since APPLE blocked Iran form accessing iTunes because of US sanctions. But till recent months and when US gov. gave permissions to US companies to reduce sanctions to Iran, the 1009 ERROR
disappeared.
Unfortunately in recent weeks, accessing iTunes and App Store is denied from Iran again. Why? and What can we (Apple Fans and Customers) do?

solved for digi clock.
solution:
- turn journe off.
- insert sd card with latest firmware
- reset journe with reset switch (left to right)
- boot journe and follow instructions
- install digi clock from virtual store
(http://aps2.toshiba-tro.de/kb0/OPT0502VS0000R01.htm).
but still recieve error message when using the gutenberg app (like mentioned before).
so, if somebody could just try the app and give me a response. that would be nice. gutenberg is a great platform for free ebooks, but without the possibility to search its useless.
thanks in advance,
holger

Issues with SharePoint 2013 after upgrading from windows 2012 to 2012 r2

We have a Sharepoint with Sp1 environment on windows 2012. Recently we upgraded the windows 2012 to 2012 r2. After the upgrade sharepoint environment is completely unstable.
At first all the sites returned 401 errors. After resolving by resetting the object cache accounts the sites are back.
Then i see that none of the performance point dashboards work. I figured that claims to windows token service is defaulted to local system account. I previously configured with a domain account. I reconfigured to work with domain account.
All the dashboard pages throw error.
Some Error logs:Failed to get document content data. System.ComponentModel.Win32Exception (0x80004005): Cannot complete this function at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow
Application error when access /Dashboards/Performance Dashboard/Main.aspx, Error=The EnableScriptGlobalization property cannot be changed during async postbacks or after the Init event. at System.Web.UI.ScriptManager.set_EnableScriptGlobalization(Boolean
value)
4. I tried to create a new dashboard and this time the performancepoint designer wont launch. After some troubleshooting i see that c2w host file didnot have the caller C:\Program Files\Windows Identity Foundation\v3.5.
I added <add value="WSS_WPG" /> and now it launches
5. Now the Dashboard launches and peruser identity works without having kerberos enabled at IIS. I have all the spn and required delegations setup for this url . But i did not configure at the IIS level
yet.
It looks like lot of things got messed up and reset. Can we upgrade to windows 2012 r2 with a sharepoint application inplace. what is the recommended approach and Whats happening with Performancepoint dashboards. IS there a known issue with sharepoint 2013
sp1.
Raj-Shpt

Thanks for the above article. Few issues are solved . One of the main issue is with Performancepoint Dashboard.
I have all the spn and required delegations setup for this url . But i did not configure at
the IIS level yet. Still per user identity works without having kerberos enabled at IIS.
Raj-Shpt

Wss3 Issues with user check in files from within excel or word 2010

I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621

Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE.

RFE: Some issues with the Pre/WebOS coming from the perspective of a former Windows Mobile user, Part I

I just switched over to a Palm Pre from a Windows Mobile device a week or two ago. Now, don’t get me wrong here—I really do like the Palm. For the most part, all of those things that were buggy, slow and inconsistent with Windows Mobile just simply work on the Palm, and that’s a very good thing. However, when a product is so good, it makes the problems stand out all that much more, and with a lot of the problems I’m finding, the decision making on the part of Palm that led to the problem is just baffling to me. I am hoping that I am just missing something on at least some of these issues, but so far, I have a laundry list of the things/features/omissions that I just really can't understand. Because I have 8 issues, I'm going to break these down into three separate posts, with a few days in between each. So, here goes PART I:
1) You can't select/manage multiple e-mails or text messages?  This is a pretty big problem, as I very consistently need to mark dozens and dozens of messages as read and then delete them, and swiping them off the screen one at a time just doesn't cut it. Not only is it slow and painfully cumbersome, but it leaves them all marked as unread back in Outlook. This really needs to be fixed, and I cannot imagine that even one single Palm user would disagree with me on this. Actually, I think my bigger concern is how the product got developed without this ability in the first place, especially when prior Palm offerings apparently had it.
2)  WebOS forces you to sort ALL contacts the same way?  I have many contacts set up in Outlook to be sorted by last name, and many others set up to be sorted by company name. I've done this because that is how I need them sorted--sometimes the individual is my focus, but I have their company listed, and sometimes the company is the focus, but I have an individual contact listed. Outlook, and every other contact management app I've seen, recognizes this, and allows me to sort each individual contact in the manner that best fits that contact. Unfortunately, WebOS apparently ignores the Outlook "File As" field, and makes me sort everybody the exact same way. As above, I cannot imagine anybody disagreeing with me that this is an important fix, and also as above, I can’t figure out why this wasn’t simply done this way from the get go.
3) No scroll bars?  Okay, so scrolling by flicking with your finger obviously works better than scrolling with a scroll bar along the side of the screen, but let’s not forget the fact that the scroll bar performs another EXTREMELY important function aside from actually scrolling: the scroll bar provides the user with instant feedback as to how long the list is and how far down the list the user has scrolled. These are two extremely, extremely useful pieces of information, and they are completely missing on the Pre. I tried to look through some applications on my Pre the other day (more on the problems with the app store below), and I had a list of probably 100 or 200 applications that fit my search criteria, and I scrolled, and scrolled, and scrolled, and never had any idea of any sort how far down the list I had gotten nor how far I had left to go—and that was extraordinarily frustrating. Oh, and if I wasn’t able to finish going through the list in one sitting, guess what, I have absolutely no possible way to run the search again and quickly get back to the point where I left off, because I have absolutely no idea how far along I had gotten. I have to say, this glaring omission makes using the Pre on anything but very short lists and websites, well, unusable. Scroll bars are everywhere—they’re there in every single program or application I have ever seen when the data presented goes off the available screen area, and there is a very, very good reason for their overwhelming prevalence—a reason that has nothing to do with the actual act of scrolling. I think this one is probably my biggest complaint with the Pre.
I will post the next few in a separate post, but these are my "top 3".  To be honest, most of these just really leave me scratching my head wondering “what were they thinking?” The Pre is a great product, but obvious little shortcomings really stand out on a good product (can anybody say “where’s the cut and paste, Apple?”, which, by the way, is a mistake that MS is about to bafflingly repeat with WM 7). I should note that it would be difficult for anybody to say that I suffer from "One True Way" syndrome when all of the things I suggest, if implemented, wouldn't detract from the experience of those users who don't want these features, but they would benefit those of us who do want them tremendously. My "way" doesn't require a compromise of any sort for anybody--it merely requires adding features, and the people who don't want/need those features can simply ignore them with no ill consequence of any sort.  Sorry for the long post, but I’m hopeful somebody at Palm is listening. And yes, I know that posting multiple problems in one post is not ideal, but these all have a common, intertwining theme, and I'm at least breaking them up somewhat.

I really like my Pre, but I understand what you mean about somewhat baffling omissions in features. I think the Palm has a winning platform already, they just need to focus on hunting down and destroying bugs for a few months. Honestly, most of the things the Pre is missing should be provided by third parties except they're hesitant to invest because the pre and pixi haven't sold like gangbusters compared to Android and the iPhone. But really, if the price keeps dropping on palm hardware and they keep launching on new platforms (due soon on att), I think we'll be looking at a different view in a few more months. I'd wager that Palm has sold a bit less than a million devices, add Att and you'll end up around 1.2-1.5. If they keep fixing issues and making current customers happy, then launch a nice phone the end of this year, they'll be in good shape. You don't need to sell 15 million units to have a viable platform, just enough of a mass to ensure people want to take a risk developing. Notice this story http://www.technewsworld.com/story/69684.html?wlc=1270413481 .

Issue with the import of hyperlinks from FM to Robohelp

Hi,
I am trying to produce online help (WebHelp) using RoboHelp 9 based on FrameMaker files (FM8). Previously I was working with WebWorks ePublisher (which was way easier to use since there wasn't much to customize...). I'm linking (not importing) the book to the RH project.
Now I'm having trouble with the following points:
1. Table of contents: the TOC imported from FM to RH does not work properly, some sections should be converted into a book, but are ignored by RH, so I had to create a TOC manually. If everyone know where this can come from, please help me . Of course, I checked the styles, and the TOC in FM perfectly reflects the title levels...
2. Hypertext links: this is the biggest issue. I have around 3000 pages, so I can't recreate each hyperlink manually.. In FM, I use the "Hypertext" marker and then I put "openlink myfile.fm:firstpage", which works perfectly fine in the PDF output. However, in RH, the marker is totally ignored, and there is no hyperlink in the output file. I checked the source code of the htm file, but there is absolutely nothing that suggests a link (no <a href="...">).
I tried to update the project, and tried other markers like URL myfile.fm, but it did change anything...
Also, I tried generating the online help directly using FM10 (trial version of the TCS, until I can confirm that it is worth it), but the TOC in the online help didn't correspond to the one in FM, so I gave up and used RH to create the TOC manually...
Thanks in advance for your help.
PS.: I'm not a native English speaker, so sorry if the language is a little messy...

Hi,
Thanks for your answers.
I tried generating the help using FM10 then File > Publish, but the TOC and the hyperlinks aren't working any better. I also tried converting the book into FM10 format, then linking it to a RH9 project, but the results were the same.
The titles which are ignored in RH have the same styles as the titles which are not ignored, only their names are different, and the ignored titles are numbered.
Also, these titles corresponds to a file in FM (which contains a small chapter TOC), and the file is totally ignored as well.
Does anyone create links between files of a same book? I also tried using FM10 then RH9, but the results are the same as well
Thanks in advance.

Issues with Reorg on a tablespace from DB13

Similar Messages

Maybe you are looking for