Issues with 'Rounding' function (Word 2007 issue? Works in Word 2003...)

My colleague (using Word 2003) and I (using Word 2007) are working on a change to a template where we include a formula that has the function called rounding.
She (2003) is able to preview the pdf but I (2007) am getting error message: : oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'round'
All other settings that we have appear to be the same (same config file, same java version, etc)
Does anyone know if there are some changes to Word 2007 that are causing this? And, any ideas on how to resolve?
Thanks for the help!
Background:
-The function is designed provide a total weight value: each individual weight value, multiply by a factor of .80, round up, and then added together to get a total amount.
-Because we also show the individual weight values on the output, (also multiplied by the factor of .80 and then rounded up), we need the factor and rounding to happen before the sum).
The entire set of functions for the total weight value is:
<?xdoxslt:set_variable($_XDOCTX,'sum',0)?>
<?for-each:LIST_G_CONTAINER_NAME1?><?for-each:G_CONTAINER_NAME1?>
<?xdoxslt:set_variable($_XDOCTX,'sum', xdoxslt:get_variable($_XDOCTX,'sum')+ xdoxslt:round((GROSS_WT*0.8),2))?><?end for-each?><?end for-each?>
<?format-number: xdoxslt:get_variable($_XDOCTX,'sum');'9G990D00'?>
space
<?WEIGHT_UOM_CODE?>
Error when attempting to preview the pdf after uploading an xml file:
: oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'round

Hi,
I took my original file (didn't have the round functionality) and Word 2007 and did the following:
1) Tested with xml to ensure that there are no other issues - was able to preview successfully
2) Added the function you suggested: <?xdoxslt:round(1000.98978,2)?> and saved the change
3) Tried to preview using the same xml and got the same error message about rounding
I can't test on 2003 because my colleague is not working right now (she is the one with that version installed). I will try on 2003 later today (but I am guessing it will work for her because the other rounding function works for her).
Thanks for any other ideas about this.
Here is the entire extract of error message:
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
RTFProcessor setConfig: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdo.cfg
FOProcessor setData: C:\Data\BI Publisher\2010_CR-102626_PL-CML_Net Weight\Net Weight Template Changes\Testing\OTST_SC-06_PL_SGS-2903194_Direct_ENG_Jul-09.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at RTF2PDF.runRTFto(RTF2PDF.java:632)
     at RTF2PDF.runXDO(RTF2PDF.java:466)
     at RTF2PDF.main(RTF2PDF.java:254)
Caused by: oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'round'
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1526)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:517)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
     ... 16 more

Similar Messages

Issue with ROUND function in RTF template

Hi All,
Can anyone please help me in implementing the ROUND function at the RTF template.
Need to handle rounding of amounts at the RTF template level itself.
The ROUND function should be implemented to the following tags:
<?sum(current-group()/TAXABLE_AMOUNT)?> (Record level)
<?sum(TAXABLE_AMOUNT)?> (Report level total)
Eg. If the Sum(current-group()/TAXABLE_AMOUNT) for a particular record is 401.65 then it should round of to 402
we try to do this using following syntax ..
1) by declaring variable "value"
<?xdoxslt:set_variable($_XDOCTX, value, sum(current-group()/TAXABLE_AMOUNT))?>
2) <?xdofx:round(sum(current-group()/TAXABLE_AMOUNT))?>
3)<?xdofx:round(xdoxslt:sum(current-group()/TAXABLE_AMOUNT))?>
but we ding get the solution.
A quick response on this is highly appreciable.
Thanks,
Praveen

Re: Summing derived values within xdofx:
Re: Rounding not working

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Issue with gui_download function module

Hi All,
         I have an issue with gui_download function module that it is creating one extra line while downloading my internal table data into text file,which i donot want.i have searched for various threads but couldnot get the proper reply.Or please provide me some other Function Module which will not create one extra line.Please help.

part 2
INCLUDE RPPPXD00.
DATA : BEGIN OF COMMON PART A.
INCLUDE RPPPXD10.
DATA : END OF COMMON PART.
INCLUDE PC2RXTW0.
INCLUDE RPC2RX00.
DATA : BEGIN OF COMMON PART B.
INCLUDE RPC2CD00.
DATA : END OF COMMON PART.
INCLUDE RPPPXM00.
INCLUDE RPCMGR00.
AT SELECTION-SCREEN OUTPUT.
CONCATENATE SY-DATUM2(6) SY-UZEIT0(4) INTO REF_NO.
LOOP AT SCREEN.
    IF R1 = 'X'.
      IF SCREEN-NAME = 'FLN' OR SCREEN-NAME = '%_FLN_%_APP_%-TEXT' OR
         SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT' OR
        SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT'"SOC BY ANKITA"
       OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
       OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
       OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
       OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
       OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R2 = 'X'.
      IF SCREEN-NAME = 'FLN' OR SCREEN-NAME = '%_FLN_%_APP_%-TEXT' OR
         SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT' OR
         SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT' "SOC BY ANKITA
         OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
         OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
         OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
         OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
         OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R3 = 'X'.
      IF SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT' "SOC BY ANKITA
        OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
        OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
        OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
        OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
        OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R4 = 'X'.
      IF SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'"SOC BY ANKITA
         OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
START-OF-SELECTION.
SELECT SINGLE * FROM T549Q WHERE PERMO = '01'
                             AND   PABRJ = PRD+0(4)
                             AND   PABRP = PRD+4(2).
FR_DT = T549Q-BEGDA.
TO_DT = T549Q-ENDDA.
CONCATENATE FR_DT0(4) FR_DT4(2) INTO FR_P.
CONCATENATE TO_DT0(4) TO_DT4(2) INTO TO_P.
PN-PAPER = PRD.
PN-PERMO = '01'.
GET PERNR.
RP-PROVIDE-FROM-LAST P0003 SPACE PN-BEGDA PN-ENDDA.
RP_PROVIDE_FROM_LAST P0001 SPACE PN-BEGDA PN-ENDDA.
IF PNP-SW-FOUND EQ 1.
   SN = SN + 1.
   ITAB1-SNO = SN.
   ITCC-SNO = SN.
    ITAB1-ENO = PERNR-PERNR.
    ITAB1-NAM = PERNR-ENAME.
ELSE.
    REJECT.
ENDIF.
RP-INIT-BUFFER.
RP-SEL-CALC.
CALL FUNCTION 'RP_EVALUATION_PERIODS'
    EXPORTING
      LAST_CALCULATED_DAY = P0003-ABRDT
      LAST_DAY_IN_PERIOD = TO_DT
      RETROCALCULATED_DAY = RP-SEL-CALC-RRDAT
    TABLES
      DIR                 = RGDIR
      EVP                 = EVP
    EXCEPTIONS
      RGDIR_EMPTY         = 1
      INTERNAL_ERROR      = 2
      OTHERS              = 3.
DESCRIBE TABLE EVP LINES LIN.
IF LIN > 0.
    LOOP AT EVP.
      IF EVP-IAPER = TO_P AND EVP-PAPER = TO_P.
        RX-KEY-PERNR = PERNR-PERNR.
        UNPACK EVP-SEQNR TO RX-KEY-SEQNO.
        RP-IMP-C2-TN.
        READ TABLE BT INDEX 1.
        READ TABLE WPBP INDEX 1.
        READ TABLE TAX INDEX 1."CHANGES BY ANKITA
        ITAB1-BAC = BT-BANKN.
        ITAB1-BKEY = BT-BANKL .
        ITAB1-DEP = WPBP-KOSTL.
        ITAB1-BETRG = BT-BETRG."CHANGES BY ANKITA
        ITAB1-TAXID = TAX-TAXID."CHANGES BY ANKITA
        YEAR = VERSC-PAYDT+0(4) - 11.
        MONTH = VERSC-PAYDT+4(2).
        DAY = VERSC-PAYDT+6(2).
        CONCATENATE YEAR MONTH DAY INTO ITAB1-PDT.
       ITAB1-PDT = VERSC-PAYDT - 110000.
        ITCC-DEP = WPBP-KOSTL.
        LOOP AT RT WHERE LGART = '/559'.
          ITAB1-BTFR = RT-BETRG.
          ITCC-BTFR = RT-BETRG.
         IF EVP-SRTZA = 'P'.
           ITAB1-BTFR = ITAB1-BTFR - RT-BETRG.
         ELSE.
           ITAB1-BTFR = ITAB1-BTFR + RT-BETRG.
         ENDIF.
        ENDLOOP.
      ENDIF.
    ENDLOOP.
ENDIF.
APPEND: ITAB1, ITCC.
CLEAR: ITAB1, ITCC.
END-OF-SELECTION.
CONCATENATE 'Prepared By:' ` ` PREPBY INTO PREPBY.
CONCATENATE 'Approved By:' ` ` APROBY INTO APROBY.
IF R1 = 'X'.
    FORMAT COLOR 2.
    ULINE (127).
    NEW-LINE.
    WRITE: 2 'Sr No.', 10 'Emp Num', 27 'Name'.
    WRITE: 57 'Department'.
    WRITE: 72 ' Transfer Amount' RIGHT-JUSTIFIED.
    WRITE: 92 'Bank Key', 107 'Bank AC. Number'.
    WRITE:1 '|', 8 '|', 25 '|', 55 '|', 70 '|', 90 '|', 105 '|', 127 '|'.
    NEW-LINE.
    ULINE (127).
    NEW-LINE.
    FORMAT COLOR OFF.
    LOOP AT ITAB1.
      SN = SY-TABIX.
      WRITE: 2 SN, 10 ITAB1-ENO, 27 ITAB1-NAM.
      WRITE: 57 ITAB1-DEP.
      WRITE: 72 ITAB1-BTFR.
      WRITE: 92 ITAB1-BKEY, 107 ITAB1-BAC.
      WRITE: 1 '|', 8 '|', 25 '|', 55 '|', 70 '|', 90 '|', 105 '|', 127 '|'.
      ULINE (127).
      NEW-LINE.
    ENDLOOP.
    SKIP 4.
    ULINE 90(32).
    NEW-LINE.
    WRITE: 90 PREPBY.
    SKIP 4.
    ULINE 90(32).
    NEW-LINE.
    WRITE: 90 APROBY.
ENDIF.
IF R2 = 'X'.
    LOOP AT ITCC.
      COLLECT ITCC INTO ITCOL.
    ENDLOOP.
    FORMAT COLOR 2.
    ULINE (44).
    NEW-LINE.
    WRITE:2 'Sr No.', 9 'Department'.
    WRITE: 27 'Transfer Amount ' RIGHT-JUSTIFIED.
    WRITE:1 '|', 8 '|', 25 '|', 44 '|'.
    NEW-LINE.
    ULINE (44).
    NEW-LINE.
    FORMAT COLOR OFF.
    LOOP AT ITCOL.
      SN = SY-TABIX.
      WRITE: 2 SN, 9 ITCOL-DEP, 27 ITCOL-BTFR.
      WRITE:1 '|', 8 '|', 25 '|', 44 '|'.
      NEW-LINE.
      ULINE (44).
      NEW-LINE.
    ENDLOOP.
ENDIF.
IF R3 = 'X'.
    LOOP AT ITAB1.
      CLEAR: ITTF, P3, P11, P13, P6, V_BAC.
      LEN = STRLEN( ITAB1-BKEY ).
      IF LEN < 3.
        CONCATENATE ITAB1-BKEY '***' INTO P3.
      ELSE.
      LEN = LEN - 3.
        LEN = 3.
        P3 = ITAB1-BKEY+LEN(3).
      ENDIF.
      CLEAR LEN.
      V_BAC = ITAB1-BAC.
      REPLACE ALL OCCURRENCES OF '-' IN ITAB1-BAC WITH ''.
      CONDENSE ITAB1-BAC NO-GAPS.
      LEN = STRLEN( ITAB1-BAC )."if length of acc num > limit
      IF LEN > 11.
        IT_FAIL-EN = ITAB1-ENO.
        IT_FAIL-BA = V_BAC.
        APPEND IT_FAIL.
        CLEAR: IT_FAIL.
        CONTINUE.
      ENDIF.
      P11 = ITAB1-BAC.
      CONCATENATE P11 '***********' INTO P11.
above step is for putting '' in place of unfilled chars of P11.
      P13 = ITAB1-BTFR * 100.
      P6 = ITAB1-PDT+2(6).
      CONCATENATE ` ` P3 P11 BTC P13 P6 INTO STR.
      ITTF-ROW = STR.
      APPEND ITTF.
    ENDLOOP.
    IF ITTF[] IS NOT INITIAL.
      CONCATENATE FLN SY-DATUM SY-UZEIT '.txt' INTO FILEPATH.
      CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME                        = FILEPATH
        FILETYPE                        = 'ASC'
     WRITE_FIELD_SEPARATOR           = 'X'
        TABLES
        DATA_TAB                        = ITTF
     OTHERS                          = 22
      SKIP 2.
      IF SY-SUBRC <> 0.
        WRITE:/ 'Unable to Download file at ', FILEPATH.
      ELSE.
        WRITE:/ 'File with following data downloaded at ', FILEPATH.
        NEW-LINE.
        SKIP 2.
        LOOP AT ITTF.
          WRITE:/ ITTF.
        ENDLOOP.
      ENDIF.
    ELSE.
      WRITE 'No Data, no file was downloaded'.
    ENDIF.
    IF IT_FAIL[] IS NOT INITIAL.
      SKIP 2.
      FORMAT COLOR 2.
      WRITE 'Acc. No. of following employees exceeded the length limit'.
      WRITE:/ 'So their entry was not created in the file'.
      SKIP 1.
      WRITE : 'Employee Number', 20 'Bank Acc. No.'.
      FORMAT COLOR OFF.
      LOOP AT IT_FAIL.
        NEW-LINE.
        WRITE : IT_FAIL-EN, 20 IT_FAIL-BA.
      ENDLOOP.
    ENDIF.
ENDIF.
IF R4 = 'X'."CHANGES BY ANKITA
    WRITE:/ 'ERROR LOG - BANK A/C NO. CONTAINS ALPHANUMERIC'.
    WRITE:/ 'EMPID' COLOR COL_POSITIVE,12 '|',15 'Receiving Bank Code' COLOR COL_POSITIVE,
                                                                  40 '|','Receiver A/C No' COLOR COL_POSITIVE.
    PERFORM EXTRACT_DATA.
    SKIP 2.
ENDIF."EOC
RP-READ-PAYROLL-DIR.
Edited by: ANKITA BHARDWAJ on Dec 9, 2009 10:36 AM

Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

Hi All,
Need some urgent help..
Iam facing some issue with the Function Module 'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
As shown below, in the function module, the Table IT_PROPERTIES_RESULT gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and L.
This updation of IT_PROPERTIES_RESULT table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
call function 'SKWF_FIND_BY_QUERY
exporting
CONNECTION_SPACE         =
    OBJ_TYPE                 = 'L'
PTYPE                    =
X_STRICT                 =
IMPORTING
ERROR                    =
     tables
     CLASSES                  = IT_CLASSES
     QUERIES                  = IT_QUERY
     RESULT_OBJECTS           = IT_LOIO
PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
The values are as follows:-
Values getting populated in IT_CLASSES BW_LO_TRAN               Values getting populated in IT_QUERY 1) BW_QUERY, 2) /BIC/ZSERVICE
I would like to know whether any Standard Customizing BW transaction is present that is maintaining IT_PROPERTIES_RESULT table properties and fetching through this Function Module.
Also, suggest how this issue can be resolved
Thanks & Regards,
Shailesh nagar

Thanks Suhas. That definitely helped.
Also the following links helped.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Cheers,
Preethi

Issue with Duplicate FUNCTION

Hi Guys:
I am experiencing some issue with DUPLIATE FUNCTION. What happen is that I have create some BUTTONS on the stage that was used througth out difference scence.....those buttons has same action that point page to particular scence. And this is when I found the DUPLICATE FUNCTION issue.
I found that I could get away by changing the name of the FUNCTION, but as I have quite a lots of those buttons so I really don't think this method is very pratical and organized. So does anyone have any better idea how this can be solved?
Many Thanks!

Thanks so much, this did solve the problem. Studpid me that were trying to add same FUNCTION on each Scene that has the same button. Initially I thought it's more complex in AS3, but seems AS3 is actually trying to make thing easier and more praticler.
Not really good at previously AS, but decided to spend some time on learning AS3.0 now. Hope I could help people like me on the forum with question about AS3.0 soon. Just like the favor you did for me.
Many Thanks!!

As FI consultant, What are critical issues with other Functional Consultant

Hai, Masters
Can you express about Critical issues with other functional consultant with exmples
Regards
Ramesh K

Hi Ramesh K,
I think the critical issue should be the definaition cross application should be consistency( Ex in FI, CO, MM or SD).
And the Main issue is the result updated from FI to other applications or from other applications to FI is correct or not!
With Best Regards,
Gladys Xing

[svn] 4610: Commit Josh's patch for 3. x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil .toString() working with QNames.

Revision: 4610
Author: [email protected]
Date: 2009-01-21 12:48:01 -0800 (Wed, 21 Jan 2009)
Log Message:
Commit Josh's patch for 3.x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil.toString() working with QNames.
QE: Yes, please add a test case to ObjectUtil tests for this scenario.
Doc: No
Checkintests: Pass
Bugs:
SDK-17367 ObjectUtil.toString(QName) causes RTE
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17367
http://bugs.adobe.com/jira/browse/SDK-17367
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/utils/ObjectUtil.as

VPN-User,
Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.
Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those. This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
Thanks for your patience
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I installed indesign CS5 on new macbook pro and keeps freezing with spinning wheel once the app opens. Is there an issue with OS Mav or font issue or a plist I can pull. All other Adobe products work.

I installed indesign CS5 on new macbook pro and keeps freezing with spinning wheel once the app opens. Is there an issue with OS Mav or font issue or a plist I can pull. All other Adobe products work.

Migration should never be done with any Adobe program.
If you have done Migration, you have to UNINSTALL first (if even possible) and then download Adobe Creative Cloud Cleaner Tool and run that also. When this is done, restart your computer and install the programs from an original Adobe Installer.
Other question is, if your OS is supporting that version. You can try it, it is not officially supported, but it might work.
But CC will work, upgrade to CC2014 (without additional cost), use that as it is better anyway.

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

Anyone had issues with on/off sleep button not working anymore

Anyone had issues with on/off sleep button not working anymore?

If there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, use virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn OFF iPhone. To turn ON, connect iPhone to power, charger or USB of computer.

Issue with @Round

Hi all,
I have following problem. I use @Round(member name,2) for 3 members. But parent dynamiccalc member with aggregation operator displayed like 16212.960000000001. How is it possible? And how can i fix it. Others members displayed like this:
15689.94
178.7
344.32
Thanks

Write a member formula for dynamic calc member with @ROUND function.
Cheers..!!!

Microsoft Word 2007 states "Microsoft Office Word Has Stopped Working"

Microsoft Word 2007 states "Microsoft Office Word Has Stopped Working" after I close any word document, (newly created or old word documents). Functionality of Word appears to be fine, I'm just tired of it crashing everytime I close it. Please HELP!
I am using Windows Vista, Service Pack 2 and Microsoft office 2007. The funny thing is, that when you are logged in to the other profile that we have created on our computer, Microsoft Word seems to work perfectly fine. The followiing is the exact "problem
signature":
Problem signature:
Problem Event Name: APPCRASH
Application Name: WINWORD.EXE
Application Version: 12.0.6541.5000
Application Timestamp: 4c38f4a9
Fault Module Name: StackHash_7ea6
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03821
Exception Code: c0000374
Exception Offset: 000afaf8
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 7ea6
Additional Information 2: ac730771d80f73e85b4b32dbb839afea
Additional Information 3: dd03
Additional Information 4: 741335d7d979867fc01d44e6acd4ebee
Read our privacy statement:
http://go.microsoft.com/fwlink/?link...3&clcid=0x0409
If you can explain the solution in the most simple terms possible, it would help a lot. Thank you in advance.
--Ty

Hi,
This issue may occur due to conflict with certain software\driver such as PDF add-ons or default printer software.
To resolve your issue, you can follow the methods below to delete the corresponding registry:
1. Click Start , type regedit in the Start Search box, and then press ENTER.
2. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
3. Locate and then click the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Word\Data
4. On the Edit menu, click Delete, and then click Yes.
5. Exit Registry Editor.
6. Restart Word
Hope it helps.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

IPod nano 7G issues with shuffle function

Dear all,
I just bought a 7G iPod nano. Altogether it's great but I have a couple of issues I would like to comment with you:
1. I sometimes use the "shake to shuffle" function, but when I go and turn it OFF, the shuffle function still remains (although not in the "shake" mode), and I must turn it off manually by tapping on the screen while a song is playing, and de-selecting it. Does this happen to you?
2. When I pair the iPod nano 7G to my car through bluetooth, after listening to any album up until the end, it then suddenly pauses, then starts playing again but in a shuffle mode, without me having done or touched anything. So after the end of any album, it just turns on the shuffle mode automatically. My car stereo system is a 2012 Mercedes Benz Audio 20 system, which has both A2DP and AVRCP profiles. Has anyone experienced something similar?
It's sounded like fun to listen to the iPod wirelessly in the car, but I must say that the bluetooth functionalities are so limited (play, stop, next track, last track) that it quicly becomes quite boring. I wish it had all the browsing controls like when you plug it in...Any comments?
Thanks a lot in advance for you help with these issues,
CCCP

im having the same problem. I drive a 203 c class with audio 20 and for some reason the media interface wont sync with my ipod. The bluetooth works fine but when i try to plug it via the media interface cables, it only charges....

Authorization issue with upload functionality

Hi,
I have issue with authorization with upload functionality.
we have country as authorization relavant field. if we are giving some country authorization to user it is giving authorization error at upload functionality.
But if we give all country authorization than it is working fine.
Could you guide me how to avoid this situation. We can not give all country authorization to all the users.
Thanks,
Naman Shah

Hi Naman,
For SAP BPS
Here while defining a variable you can set the user authorization and can determine which all records can be seen by the user.
For eg. Create a variable for country with replacement type User-specific values. Here you can assign values to a particular user id.
Please check for more details:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/548bafbc0f357ee10000000a11466f/frameset.htm
For SAP IP
Please Check: User Authorization in SAP IP
Regards, Rishi
Edited by: Rishikesh Sinha on May 6, 2009 8:01 AM

Issues with 'Rounding' function (Word 2007 issue? Works in Word 2003...)

Similar Messages

Maybe you are looking for