Issues with RPD Version Number - Uploading OLD RPD

Hi Gurus,
I am facing a issue in OBIEE 11G from last few days.
Whenever I upload a RPD,the EM shows that it has incremented the veersion number of my RPD and it has been deployed. But after checking the asnwers we and opening the RPD in online mode we still find that a back dated(old) RPD has been uploaded.
Unless and untill we rename the RPD and upload it the changes are not reflected. Can you please help resolve this issue?
Thanks

Hi, I had this issue and was not able to resolve it. I had to do a re-install of OBIEE 1.1.1.7 . I'm curious to know if anyone has the same problem and was able to fix it another way, so I'm going to list my observations below:
EM did increment my repository.RPD to repository_002.rpd but repository_001.rpd was still active.
Mbeans showed that the "current" RPD was 002, but NQSConfig.ini showed that "Star = repository_001"
When clicking "Apply" under EM Deployment screen and restarting, the version number incremented, but NQSConfig.ini did not update
"Restart All" in EM appeared to be unusually fast.
When restarting OBIEE OMPN components in EM, the components always show ALIVE under opmnctl in the console window
oracle.as.managment.mbeans.opmn mbean was not available in the system mbean browser, which I believe means that the OPMN instance was some how unregistered
I re-registered the instance, which completely wiped the entire instance1 directory clean (I do not recommend doing this unless you back everything up outside the instance)
Re-registering the instance worked temporarily, but then broke again later that week

Similar Messages

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

Issues with photos/videos not uploading in chronological order..

I have been having issues with Adobe Bridge not uploading my photo/video files (from a CF card) in chronological order. When uploading I select to rename the files by shot date + 01.. etc. For photos the first image then becomes the last image after uploading, and for video files everything is out of order. Not sure why as the only other thing I have selected to add is copyright info. Also having issues with Bridge not converting raw files to DNG (which has led me to use Adobe DNG Converter - not terrible, but hopefully there is a reason?). I think it is a problem with Bridge, as photos uploaded to my website - something completely non-Adobe related are also then thrown out of order.. so it seems to be an issue with files that have come through Bridge at some point. Any advice is much appreciated.

I just noticed that iTunes is now accepting 'some' videos. They are all the same file type (mp4), but iTunes is just randomly choosing which videos it wants add to the Library & not.
I'm still not getting any results when it comes to the Photos.
... and one last thing ... only random songs are displaying the album art on the iPod. Yhey ALL appear in iTunes. If i restore my iPod & re-load everything, some of the songs that DID have artwork appearing on the screen now don't.
This is really messed up! Wonder if the eventual Vista-compatible iTunes will fix this problem ...

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Is anyone having issues with Android version 4.3 for Galaxy III throwing in zeroes into text messages?

I received a message on Christmas Eve that a free update was available for my Samsung Galaxy III. I accepted the download and discovered some enhancements and fixes that I liked (finally, my voicemail icon displays the number of waiting voicemails that I have!) but I've noticed to glaring issues:
1. When I send text messages that include numbers (a phone number for example) the OS throws in random zeroes into the number. I have to usually touch the ENTER key and type the number on a new line and play around with it until the number stays in the message correctly.
2. I've had occasional lockups using the media hub which, when I do a restart, causes my settings to revert to the default factory settings....kind of a pain.
There may be other issues.
Q. Has anyone out there experienced this same thing?
Q. Is Google going to fix these issues? I noticed that on Christmas day a half dozen or so updates were made, but these to things still are a problem.
Q. Also, the Verizon Wireless Software Upgrade Assistant on my laptop insists that my version is not supported. I can still access photos and music, but it's a little annoying...

I'm sorry you're having issues with your phone after your update BigLouie1124. I recommend enabling safe mode to see if any of your apps are causing issues with your new software. If so, you can remove them. Here are the steps http://vz.to/1cD0kqT . If you continue to have issues the last step would be a factory reset to clear up some of your issues http://vz.to/JCsr33 . Please keep us posted and continue to clear unwanted message threads and clear your browser history periodically.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Version number for GPO's not in sync with the version number for GPO's on the Baseline domain controller

Hi
I accidentally removed one of our domain controller's hyper-v image (DC-02) from the hyper-v manager and to bring it back online launched a new virtual machine using the same virtual hard drive. This brought back the domain controller machine and I set the
original IP address to the same assuming that everything would just working fine.
Sadly, that wasn't the case as when I tried to open the group policy manager on that machine I started getting "Access is denied" error. I was then presented with an option to open the group policy manager with the first available DC which I did
and was able to open it with showing the same machine as the baseline domain controller under the status tab (DC-01 is actually the baseline DC). I then clicked Detect now and noticed it was showing 1 DC under replication in progress with problems in GPO version.
I then did the same thing on the primary DC (DC-01) and even there it was showing this only (images attached).
So I started exploring over the internet going through various articles but couldn't find a solution which I could apply without worrying about corrupting something somewhere. I also went to the SYSVOL folder on both the DC's to check the version number
in GPT.ini files which are mentioned below:
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5439513
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5308439
Could anyone please help me sort this out? I am no system admin and whatever knowledge I have of setting up DC, AD etc is from following one article or the other over the internet.
Regards
Sajat Jain

Hi
Apologies for responding late. I followed through all the points mentioned by Frank and even did a non-authoritative restore synchronization but still no luck.
I am attaching the output from the dcdiag /q and the from the event viewer after doing to non-authoritative restore synchronization.
DCDIAG /Q
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CC-DC03 failed test DFSREvent
Unable to connect to the NETLOGON share! (\\CC-DC03\netlogon)
[CC-DC03] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... CC-DC03 failed test NetLogons
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:52:17
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:54:12
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:54:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:55:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:59:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:04:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 18:05:10
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:09:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:14:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:19:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:24:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
......................... CC-DC03 failed test SystemLog
EVENT VIEWER LOGS
The DFS Replication service initialized SYSVOL at local path C:\Windows\SYSVOL\domain and is waiting to perform initial replication. The replicated folder will remain in the initial synchronization state until it has replicated with its partner CC-DC01.cloudchowk.lab. If the server was in the process of being promoted to a domain controller, the domain controller will not advertize and function as a domain controller until this issue is resolved. This can occur if the specified partner is also in the initial synchronization state, or if sharing violations are encountered on this server or the synchronization partner. If this event occurred during the migration of SYSVOL from File Replication service (FRS) to DFS Replication, changes will not replicate out until this issue is resolved. This can cause the SYSVOL folder on this server to become out of sync with other domain controllers.
Additional Information:
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 4689406D-D6D8-49E0-8079-2B1D4AE61BC6
Replication Group Name: Domain System Volume
Replication Group ID: 6B162096-2EFA-4D4C-BF13-62CC5B112B97
Member ID: 566943F9-D2FB-4304-823D-10DC972F831A
Read-Only: 0
Should I just start over again by removing DC03 and setting up another DC?
Regards
Sajat Jain

Issues with newer version of Acrobat Reader

I'm not looking for advice or a fix for this problem. I'm simply posting it so that hopefully, the folks at Adobe will get a clue & take the issues with their software seriously. The real fix here is for them to quit ignoring bugs in their software and correct the code. Anyway...
In the most recent versions of Acrobat Reader (looks like specifically to X & XI), it seems to be hit or miss as to whether Reader will open PDF attachments in Outlook email. Typically, when I double-click on a PDF attachment, nothing happens. An instance of AcroRd32.exe is created as a process (which hangs), but the PDF file doesn't open. If I make the mistake of double-clicking on the file again, another instance of AcroRd32.exe sucks up more of my system resources. This will occur for each time I double-click on the attachment. Sometimes I get lucky, and it will open the PDF file. Sometimes, if I right-click on the attachment and select open, it will do so. Most times, it just does the same thing as double-clicking.
I've scoured the forums, searched online... Lots of people have reported this or similar problems. Solutions have been offered up, which don't work for most users. etc., etc., etc.
It's just like the issue that Adobe has had for years with Acrobat - The software is notorious for remaining in memory as a process, long after you've closed the PDF file you opened. And likewise, for each PDF file you open, yet another instance of the software loads into & consumes memory.
Adobe has had problems like this for years. They never have taken it seriously, they never choose to fix it.
So, as I said in the beginning of the post - I'm not looking for a fix. I came up with my own fix - I deleted version XI, located an old copy of 9.4 & installed it.
Nope, I'm not looking for solutions or support. I simply wanted to ***** about it.
Doubt Adobe will even notice the post, and if they do, they'll just operate like they always have... Hope that their sloppy code just magically fixes itself.

This is a user forum, and not the place to file bug reports to Adobe. So you are right: your post won't be noticed by the Acrobat developers. Nor would it give them enough information to reproduce the problem.
P.S. I never had a problem opening Outlook attachments with Adobe Reader. If I had, I would start by disabling Protected Mode, which is the most common cause for a multitude of problems in Adobe Reader.

Issue with getting sequance number from db in EO for a primary key column

Hello Experts,
we are working on ADf 11.1.1.2.
we are facing issue with sequence number in our UAT instance.
dev instance and sit instances did not gave any issues.
We have one EO in that for one attribute we have given the value as
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
in order to get the primary key column value from db sequance .
<TransientExpression><![CDATA[(
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
]]></TransientExpression>
now the issue is "I have incremented the sequence number through SQL plus from 10 to 20. And created a record on a VO which is based on above EO.
But the sequence iam getting is 11 instead of 21."
This is happening only in our uat instance all other instances are working fine.
Can any one tell us how this frame work is still pointing tho the old sequnce number.
regards
Gayaz

Also make sure that your sequence has NOCYCLE option.
some thing like this:
CREATE SEQUENCE test_seq
START WITH 1
INCREMENT BY 1
NOCACHE
NOCYCLE;

Issues with 4.1 Data Upload

I've got some issues with the new feature 'data upload' in 4.1. I had already made the pages and the data loading and it worked perfect. Now a new column was added to my data loading table and I have to add a new table lookup for this column. Everything is set up like it has to be. I've got 4 table lookups. When I try to upload some data and indicate the table columns to the data, I've always get the error: Failed to retrieve the lookup value. There is no problem when I do a data load where he only have to retrieve one column from the lookup table, when he has to retrieve data from more tables for more columns, I always get the FAILED message. Does anyone know the problem of this situation? I already tried to make a totally new data loading, but this also failed to do the job.

Hi Ellenvanhees,
I dont think the number of lookups that you defined is an issue here. If possible try to share more details about your data and tables. The few things that come to my mind are probably your data.
But if you are able to do one by one lookup without problem then I think your upload is failing due to null values. The current status of data upload feature returns a failed lookup even if a null value was to be uploaded. This is a bug #13582661 and has been fixed for the future release.
Patrick

Issue with planning version in KP98

Hi Team,
I have an issue with KP98 transaction when copying the actual data to plan data . The problem which I am facing is we are copying period 1 to 6 actuals data to 1 to 6 Forecast version 82 and after executing it copies the data in to old tables COSP but it is not updating FAGLFLEXT table.
We have created a planner profile with summary table FAGLFLEXT and posted the data using KP06 and GP12N.
To update data we are executing FAGL_CO_PLAN transaction and it load the data in to FGALFLEXT table . Please help me to understand why data is not loaded when using KP98 and why it is loading when using FAGL_CO_PLAN.
Thank you
Srivani

Hi Srivani
As far as I know, KP98 is meant to copy the Plan / Actual data from one version to another. It is not designed to update FAGL tables
I am not sure if there is an option to copy the data similar way in New GL planning or not. But what you are doing currently seems to be the right way to me
Br, Ajay M

ISSUE WITH NEW VERSION OF BLACKBERRY MESSENGER ON DIFFERENT BLACKBERRY PHONES

Dear Madam / Sirs,
I would like to seek assistance in resolving an issue with my BLACKBERRY TORCH 9810 I installed the new version of BLACKBERRY MESSENGER on my phone and it does not work on WIFI ONLY MODE.
For example I traveled to Mexico and Panama and was on a WIFI ZONE with open access and tried to use my BLACKBERRY MESSENGER and it did not work...I tried to deleting the application and installing a previous version but was not possible. The same issue occurs on a different BLACKBERRY phone that it was working perfectly...but after updating to the new version of BLACKBERRY MESSENGER it did not work.
Please help me resolve this issue.
Thanks in advance
Polk Marin
E-mail: (personal info removed)@yahoo.com

and what version do you have installed? I dont see this on ver 6.2.0.56
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Issues with Mac Version of Adobe Captivate 6

I am having issues with Adobe Captivate 6 for Mac. I am missing functionality. Specifically the advanced actions dialog box. I get "null" value in all the fields in the dialog box. Also when I open captivate the welcome screen is blank. I tried uninstalling and re-installing but I am still having the same issues. Am I missing something on the install? Has anyone else experienced these issues?

Hi,
Did it worked fine previously? Can share some more information like your Mac version?
Can you share the screenshot of the problem screens?
Also, Try to follow these steps, to verify in case your Preferences have not gone corrupted--
1) Close Captivate
2) Launch Finder
3) Go -- Go to Location
4) ~/Library -- Go to Preference>Adobe> Adobe Captivate 6, Rename the Folder to 'Adobe Captivate 6_Old '
5) Relaunch Captivate and verify if thing improve.
Thanks,
Anjaneai

Goods issue with blocked serial number

Hi All,
I have the following issue:
I use serial numbers in the delivery, this is mandatory, if the material has a mandatory serial number profile in the material master.
In the delivery its possible to select for a free material a serial number that's blocked (stock type 07 Blocked stock) the system accepts that. This should not happen.
Does somebody know how to solve this issue
Thanks!

Hi,
Receive again with correct item code and ware house with same serial number.
If not, Please explain with an example.
Thanks & Regards,
Nagarajan

I am having issues with new version of Final Cut Pro, is there away to download the last version so I can finish my projects?

I am having major issues with the new version of Final Cut x, I have missing clips and my computer is locking up, I need to finish some projects so is there away to go back to the last version before the new update?

Not unless you have saved a copy of the previous version; also, any libraries that you have updated to use in the newer version will not be usable in the older version anyway.
Rather than going back you should try and figure out what is wrong. The current version works great for most users. Start by clearing your preferences: hold down command and option keys while starting FCP X, and confirm when asked. Many different issues can often be solved by just that.
In case it doesn't solve, please provide more detailed information like OS version, Ram, drive and connection, etc

Query caching issue with Toplink version 10.1.3.5.0

We are in the process of upgrading the toplink version from 9.0.4.7 to 10.1.3.5.0
We are finding an odd issue with insert statements generated for an aggregate collection mapping with addTargetForeignKeyFieldName.
We have a Table Ticket and Table Task with Table Activity as a child for both.
Table Ticket
Ticket_Key (PK)
Table B
Task_Key (PK)
Table C
Activity_Key (PK)
Task_Key (FK)
Ticket_Key(FK)
Notes
Version
Here are the mappings from
Ticket Project
AggregateCollectionMapping activitiesMapping = new AggregateCollectionMapping();
        activitiesMapping.setAttributeName("activities");
        activitiesMapping.setReferenceClass(com.common.Activity.class);
        activitiesMapping.dontUseIndirection();
activitiesMapping.privateOwnedRelationship();
        activitiesMapping.useCollectionClass(java.util.ArrayList.class);
        activitiesMapping.addTargetForeignKeyFieldName("ACTIVITY.TICKET_KEY", "TICKET.TICKET_KEY");
activitiesMapping.useBatchReading();
        descriptor.addMapping(activitiesMapping);
Task Project:
AggregateCollectionMapping activitiesMapping = new AggregateCollectionMapping();
        activitiesMapping.setAttributeName("activities");
        activitiesMapping.setReferenceClass(com.common.Activity.class);
        activitiesMapping.dontUseIndirection();
activitiesMapping.privateOwnedRelationship();
        activitiesMapping.useCollectionClass(java.util.ArrayList.class);
        activitiesMapping.addTargetForeignKeyFieldName("ACTIVITY.TASK_KEY", "TASK.TASK_KEY");
activitiesMapping.useBatchReading();
        descriptor.addMapping(activitiesMapping);
The tickets and tasks with activities gets inserted in the same transaction.
Here are the queries that what we get from the toplink version 9.x
2013-10-29 10:30:50,582 - SELECT SEQ_ACTIVITY.NEXTVAL FROM DUAL
2013-10-29 10:30:50,582 - INSERT INTO ACTIVITY (TASK_KEY, VERSION, NOTES, ACTIVITY_KEY) VALUES (?, ?, ?, ?)
2013-10-29 10:30:50,582 - bind => [2900830, 0, Create Task, 8590870]
2013-10-29 10:30:50,926 - INSERT INTO ACTIVITY (TICKET_KEY, VERSION, NOTES, ACTIVITY_KEY) VALUES (?, ?, ?, ?)
2013-10-29 10:30:50,926 - bind => [326450, 1, Created Ticket, 8590860]
Here are the queries generated from toplink version 10.x
2013-10-26 23:31:10,426   SELECT SEQ_ACTIVITY.NEXTVAL FROM DUAL
2013-10-26 23:31:10,430   INSERT INTO ACTIVITY (TASK_KEY, ACTIVITY_KEY,NOTES, VERSION) VALUES (?, ?, ?, ?)
2013-10-26 23:31:10,430   bind => [2900690, 8590500, Create Task, 0]
2013-10-26 23:31:10,509 INSERT INTO ACTIVITY (TASK_KEY, ACTIVITY_KEY, NOTES, VERSION) VALUES (?, ?, ?, ?)
2013-10-26 23:31:10,510   bind => [null, 8590490, Created Ticket, 1]
It appears like the new version of the toplink caching the prepared statements and it is not recognizing the targetForeignKeyFieldName mapping of the Ticket Project.
Any help in resolving this issue is appreciated.
Thanks

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

Issues with RPD Version Number - Uploading OLD RPD

Similar Messages

Maybe you are looking for