Issues with SATA to USB adaptor and filesystem

Hi,
I just bought an SATA to USB adapter with an external power supply. I was trying to use it with a Western Digital Caviar Green 1 TB disk, I first formatted using a regular SATA cable using an MBR partition table with a single ext4 partition covering the whole disk, starting at 1 MiB to align it properly (is that right? I was getting a warning about wrong alignment and I googled it so I created the partition using parted and left that 1 MiB free at the disk's beginning). I then proceeded to copy some data in the just created partition. I shutdown the computer, disconnected the disk, and then, after turning on the PC again, I connected the disk using the SATA-USB adapter, but the filesystem was not recognized.
I tried several times using different filesystems and using GPT instead of MBR with no results. I finally tried to create the partition table and the filesystem itself while connecting the disk with the usb adapter and it worked, now I can access the partition using the adapter. But here is the catch, if I connect the disk again using the direct SATA cable, it won't even recognize the partition table, while connecting it through the adapter will work just fine. Is this safe/reliable? I'm afraid that if there is any problem in the future I will get some headaches because if right now that the disk is working I cannot access it using a SATA cable, imagine if there's a problem!
Also, at the very same time I'm writing this post, I'm copying again the data that was intended to be in the disk through the adapter and it's copying at half the speed it did when I first did it connecting it directly with the SATA cable (30 MB/s vs 60 MB/s), is this because of the adapter? or may it because of this apparently problem with the partition table and filesystem that only works when created using the adapter?
I tried to be as clear as possible but I realize that it may sound a bit confusing, I just hope it's clear enough so you could give me some advice...
Thanks!
Santiago.-
PS: What I'd like to know is if there is a way to get it to work both, when connected with the SATA cable and when connected with the adapter.
PS2: The final working configuration was using a GPT partition table and an ext4 partition using gparted while the disk was connected with the adapter.
Last edited by NaOH (2013-02-12 00:47:09)

what brand/model is the adapter ?
As for the speed difference :
Does the adapter & disk support USB3, or is it USB2 max ?

Similar Messages

Z77A-G43 issue with SATA drive

This is wierd
I have 4 Hitachi drives all of 1TB, perfectly working on old PC.
Today have decided to transfer them into new PC:
MB: Z77A-G43
BIOS: 1.20
CPU: Intel g2020
Primary drive is Intel SSD 120G series 330
I have attached 3 HITACHI drives successfully, they are all working fine.
but particular one forces MB to reboot before BIOS screen, last code seen on screen is A2?
Then I have decided to put dedicated controller 1st I took SilImage 3512 SATA/RAID Controller
- no changes computer reboots before post screen
After I took VIA VT6421 SATA/RAID Controller
- no changes computer reboots before post screen
searched web, found nothing useful.
any ideas what might causing this?
EDIT: tested controller SiI3512 on old PC and trouble HDD, everything works just fine :/
read AMIBIOS codes:
0xA0 IDE initialization is started
0xA1 IDE Reset
0xA2 IDE Detect
0xA3 IDE Enable
0xA4 SCSI initialization is started
0xA5 SCSI Reset
0xA6 SCSI Detect
0xA7 SCSI Enable
0xA8 Setup Verifying Password
A2 is ide ? what ide ? I give up.
it seams to me that this board is broken in several ways
- non working DVI
- faulting with valid SATA drive
what else awaits me on this road

Quote from: flobelix on 07-May-13, 04:27:27
using IDE previously and now AHCI might trouble Windows but system would none the less post. At least you should get past IDE detection but hanging at A2 means it doesn't.
I'm wondering about your statement you had been using SilImage 3512 SATA/RAID Controller and VIA VT6421 SATA/RAID Controller. Are these PCI add-on cards? Did you try all SATA ports controlled by the Z77 chipset. Are the drives used are all identical? Is the issue only happening with one particular drive or anytime you attach a fourth hdd no matter which one it is?
About the performance difference from AHCI to IDE the differences are minimal. Should be almost irrelevant for the hdds.
My discoveries:
Using sata mode IDE with windows installed in AHCI mode == windows hangs during loading (BSOD), probably missing drivers or similar.
Also I am unsure what A2 code means but I have noticed it is displayed while bios post screen shows up with the list of installed drives during normal boot.
And is also last code I see when I attach problematic drive resulting in reboot loop.
To be honest I haven't tried all SATA ports on board for sure I haven't tried SATA 1 (1st white) as there is my SSD drive.
But I have tried almost all other ports. I can try them all, but I don't think this will solve the problem.
I don't think problem is in what slot I put my drive, since same behavior is with SATA/RAID controllers.
And whit this SATA/RAID controllers this drive is working perfectly normal on other PC.
No not all drives are identical but I have exactly same drive as this one, and all drives are hitachi:
* HDT721010KLA330 working fine
* HDS721010SLA360 working fine
* HDS721010CLA332 (1) working fine
* HDS721010CLA332 (2) problematic drive == reboot loop (when its single drive or with others).
True I haven't tried to detach Intel SSD and leave problematic drive as only drive in system, I may try this tomorrow)
funny part is that HDS721010CLA332 (2) is working fine when I hot plug it.
Checked firmware version on both drives, and both drives have identical firmwares.
Only difference I know off is that working drive has 1 partition, and problematic drive has 2 partitions.
EDIT: forgot to say it passed SMART test, everything was green (hitachi sw), while hdd sentinel reported 1 bad sector but saying estimated drive working days > 900 days and degree was 98% I am guessing because of that 1 bad sector and too many working days (years) behind him.

OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.
Everything works perfectly previously on 10.8.4 and 10.8.5. I did not test on 10.9.0 as I went straight to 10.9.1. Anyone else having this problem? Any thoughts on resolution?

OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
Hope this helps if anyone has a similar issue

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

Are there any issues with using OS X Mavericks and Premiere CC?

Are there any issues with using OS X Mavericks and Premiere CC?

Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Peter Garaway
Adobe
Premiere Pro

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it. I'm on Mavericks 10.9.5.

one obstacle, quickly removed. thank you.
nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
That's great.
However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
Here's a video that shows what's going on:
mac pro issues july 7 - YouTube
Issue #1
Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
Issue #2
This is the second project you'll see in the video.
After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
Here are my specs:
Mac Pro 6,1 (Late 2013)
3 GHz 8-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB (x2)
OSX 10.9.4
Firmware: 2.20f18
What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
I've reported this issue to adobe.

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

ITunes 10 stalls on playback with Library on USB (2 and 3), OS X 10.8.2 2.6 GHz intel i7, MP3 320 kbps, playback is fine using internal SSD...

All this power in a brand new mac-mini.. and iTunes is constantly stalling playback every 1 - 5 minutes (only when the iTunes Library is on external drives)..
(1 - 3 second silence interrupting playback then continuing...)
iTunes 10.7 (21) 64-bit
I'd prefer to keep my MP3 Library on USB 3.. and preserve the smaller internal SSD drive for other activity...
Is there an Apple certified technique to prevent disk spin down ?
Energy Saver control panel indicates that "Put hard disks to sleep when possible..." is unchecked..
Maybe iTunes could simply buffer larger sizes of the file, or the whole file.
(I have enough RAM to hold my entire 3 gig Library..)
(if the stall occurred only in between songs that would be acceptable)
Can we get an iTunes patch for this ???

Came across this article:
http://d43.me/blog/413/slow-startup-and-sleep-problems-on-macbook-pro-22/
Removed the 5 IOFirewire files removed from System/Library/Extensions and rebooted. Startup up within seconds!
Haven't used the firewire in a while, but I don't recall having any issues with it previously.
This worked, so I'm happy. Hopefully it sticks.

Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

Hi Guys and Gals.
Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
Regards,
Jase

Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not. They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job. I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
Two and a bit years is a long time in tech terms.
Stephen
eni wrote:
I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

Can I charge my UK iPhone in USA with USA iPhone USB adaptor?

I'm going to the USA for a holiday and I want to know can I charge my UK iPhone 4S with a USA iPhone USB adaptor? I don't want to take my UK iPhone USB adaptor. So can I use the USA iPhone adaptor?

Why would it? ALL iPhones charge using industry standard USB power of 5 volts DC. All iPhone chargers output 5 volts DC.

Issues with SATA to USB adaptor and filesystem

Similar Messages

Maybe you are looking for