Issues with saving disc images using Toast 8

I am having issues saving disc images to my portable hard drive using Toast 8.
First, I'm attempting to save Dual Layer disc images to my portable hard drive for future use. I turn compression off and select DL DVD above the burn button, and select "save as disc image" from the file menu. As that point the program seem to freeze and I get the whirly-spinning rainbow. After a few minutes a window asks me if I'm buring single or dual layer. I select dual layer. Then a box appears that says "writing ...".
After it's complete I check the portable hard drive and I've got EIGHT disc images all titled "SAMPLE DISC IMAGE TITLE.TOAST.001" .....002, 003, 004, 005, 006, 007, 008. File numbers 002-008 open in itunes, and file number 1 mounts with an error that will cause Toast to crash.
This is so weird and confusing.
When I save the image to the desktop, its saves fine. BUT, when I try to copy it to the portable hard drive it gets all the way to the end and reports an error message.
Please help. Thanks
17 inch PowerBook G4 1.67Mhz 80 GB   Mac OS X (10.4.9)   External HD: Lacie Portable 100gb

After several weeks of searching and an error code 1309 I discovered the issue is not with TOAST but with my external hard drive. The drive format is FAT32 which does not allow single files to be transfered in excess of 4gb. I was attempting to create disc images of dual layered dvd's which can be up to 8 gb. Since the drive was incapable of accepting a file that size it created seperate files that made up the size of the original file.
Example: 7.8gb file transfered to FAT32 external LACIE drive. Lacie creates 8 files: 7 are 1gb, 1 is .8gb.
There is probably a program that could put these files back together but I've already experienced too great of an ordeal.
Unless the user needs the external drive for use on a PC & MAC there is not a reason to have the format of the drive set to FAT32.
I will be using Disk Utility to reformat the drive to "HFS+" in hopes to solve this problem.
17 inch PowerBook G4 1.67Mhz 80 GB   Mac OS X (10.4.9)  

Similar Messages

  • Trouble burning Blu-ray or disc image using Share

    I have a project I have tried to burn to a Blu-Ray disc and to the hard drive as a disc image using Share>Blu-ray. I have burned successfully before to the same Blu-ray burner with other projects. But now when trying to burn a disc I get this error after a day of transcoding:
    The operation couldn’t be completed. (DSPPublishing error -1024.)
    When I try to save it as a disc image it tells me there is not enough space on the disc even though there is over a Terabyte empty. The project is estimated as 21.6 gig so I know it should fit on the 25 gig bluray and of course on the hard drive. Trashing prefs did not work either. This is a very frustrating process as each attempt takes a day to transcode before the error pops up and you have to start all over again.
    I am using
    iMac (27-inch, Late 2009)
    16 GB 1067 MHz DDR3
    2.8 GHz Intel Core i7
    FCP X 10.0.6
    OS X 10.8.2

    This is the error message I get. It's after FCP X is done with making the BMV folder and runs that disc burner app. There is about 850 gigs on the drive I want to save the disc image to, lots of space.
    I thought maybe the drive the events was on was affecting this process, because it was full. I cleared out about 30 gigs and still got this message.
    I never had any problems creating a Blu-ray disc image before. That's the optimcal way, IMHO, because you can burn the BD in Toast as the disc image and Toast won't reencode or do anything, it just burns the disc image and the disc has played on ever Blu-ray player I've tried it on.
    Anyone have any more ideas?
    Thanks

  • System Image Utility - Issues with making bootable images

    During the image creation process for a Netboot, the System Image Utility reports an error. I've included the log file (everything before the removal of the bad image below).
    ------------Begin Log File --------------
    2006-06-02 13:19:25 -0400 Initiating user authentication
    2006-06-02 13:19:28 -0400 Image creation in progress
    2006-06-02 13:19:28 -0400 Starting image creation
    newfs_hfs:
    2006-06-02 14:10:30 -0400 b=400: bitmap clump size is too small
    --------------End Log File--------------------
    I have no issue creating images from restore disk sets (that shipped with machines) or retail masters of various OS's. This issue seems to be related to the particular drives I am trying to create images from.
    The drives that give me this error are hardwarily OK and the software works great. I can boot from these drives and have no issues with the machines imaged from them after the fact. I just want to Netboot off of these so I don't have to lug a million drives around...
    Any clue?

    i know that was the case in Leopard and Snow Leopard but i just mounted a leopard image to create a new netrestore on my lion server.  i was not able to boot any of my images created on Leopard or SL when running Lion Server.  I assume i need to recreate the images on Lion.  Right now my Lion server is using a leopard image as the source to create a netrestore i can push on the Lion server.

  • TS4522 Trouble burning Blu-ray or disc image using Share

    On  version  Final Cut Pro x 10.0.6,  When I try to share to a DVD disc it tells me there is not enough space on the DVD disc , the project is 2:30 minutes, I put dual DVD .
    After that just update on version Final Cut Pro x 10.0.8
    I have a tried to burn to a Blu-Ray  to the hard drive as a disc image using Share>Blu-ray. when trying to share Blu-Ray to the hard drive  I get this error after a day of transcoding:
    The operation couldn’t be completed. (DSPPublishing error -1024.)
    I am using
    Apple Mac Pro ,Mac OS X, Late 2008)
    Version 10.7.5
    Processor:  2 x 3 GHz  Quad-Core Intel Xeon, Total  8 core.
    Memory: 10 GB 667 MHZ DDR2 FB- DIMM
    Graphic: ATI Radeon HD 5770 1024 MB
    Please any one can help me for this trouble shut. 

    This may (or may not) be a separate issue – crashing rather than the DSP Publishing error.
    Two suggestions – both relying on Digital Rebellion.
    First use their Preference Manager to trash your preferences. Most of the crashes I've experienced over the past year of using FCPX have been remedied by trashing pref files.
    Second, DR has a suite of utility apps called Pro Maintenance Tools. PMT has a crash analyzer that will provide both diagnostic info and recommendations. The suite isn't cheap, but there is a trial version you can download to evaluate.
    Russ

  • Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

    Hello everyone.
    Faced very strange issue with account, which is used to run SSIS package.
    The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
    The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
    So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
    Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
    Any ideas, please? 
    MCP

    Here's the real log output:
    Date 16.04.2014 12:47:09
    Log Job History (RU-BW: Update)
    Step ID 1
    Server Server
    Job Name RU-BW: Update
    Step Name bw_import_cust_master_data
    Duration 00:00:02
    Sql Severity 0
    Sql Message ID 0
    Operator Emailed
    Operator Net sent
    Operator Paged
    Retries Attempted 0
    Message
    Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility  Version 10.50.4286.0 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  12:47:09  Error: 2014-04-16 12:47:11.45
        Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid characters.  End Error  Error:
    2014-04-16 12:47:11.47     Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid characters.  End
    Error  Error: 2014-04-16 12:47:11.48     Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid
    characters.  End Error  Error: 2014-04-16 12:47:11.48     Code: 0xC020207E     Source: Import file Flat File Source [1]     Description: The file name is not valid. The file name is a device or contains invalid characters.
     End Error  Error: 2014-04-16 12:47:11.48     Code: 0xC004701A     Source: Import file SSIS.Pipeline     Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
     End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  12:47:09  Finished: 12:47:11  Elapsed:  2.324 seconds.  The package execution failed.  The step failed.
    MCP

  • Issue with saving sales document.

    Hi,
         I have an issue with saving the sales document.
    When I save any sales document ( Order, Quotation, Contract, Delivery) its successful and showing document no in the information bar.
    But when I try to view or change the document, it shows no document exist in the database. Its not even in the archive.
    Any solution for this issue.
    Cheers
    Senthil

    Dear Senthil,
           This is related to technical issue (Database Updating) so you please take help from BASIS or ABAP people they will help you to fix this issue.
    I hope it will help you
    Regards,
    Murali.

  • I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

    I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

    Hi miffyzoo,
    If you are having bluetooth pairing issues with your iPhone and your Mac, you may find the troubleshooting steps outlined in the following article helpful:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Regards,
    - Brenden

  • Getting medium write error on burning a disc image using Disk utility

    Have a MacBrook Pro 15 inch, circa Summer 2007, using OX 10.4.11. up until recently (as in before February) have been able to burn DVD's using Toast (message Medium Writer Error). Started getting problems where the burn failed. Thought maybe it was Toast, so I tried creating an iDVD project and tried to burn the DVD using that, and it stopped in the middle as well and then spit the disk out with no error message.
    , this time I tried creating a disc image, and used disk utility to burn. The process looked like it was going to work but then failed with a message that I have a medium write error.
    I have no problems burning a regular data disk on my superdrive so I am thinking it's maybe a software glitch rather than hardware. . Any thoughts, as to what could be causing this problem all of a sudden. By the way, there are other users out there, who seems to be having DVD burning problems all of a sudden, but most people suggest other media. I am using the same stack of DVD-R's from before when I had no problem.

    Well, I had assumed my media was ok, since I had a spindle of DVD-R's and had used many of them successfully (until now!, ha ha).
    I went out this afternoon and bought another brand (Memorex) and it successfully recorded.
    So hopefully this solves my problem, I had no idea it was the media since I had used several of them before.
    Thanks for your help.

  • Can i make a win 8.1 boot disc to restore a saved disc image

    I have a H8-1455PC with Win 8.1 installed.  I have a 4TB external drive installed.  I made a Windows image and saved it to the external drive.  In the event of a system problem or failure, can I make a boot disc that I could use to restore the image.  I have copied to DVD the Win 8 software that came with the system (5 DVD's).

    Hi,
    If you created a Windows Image using the System Image Backup tool in Control Panel, File History, then you want to create a Microsoft Recovery Drive (MRD).
    You can use the USB MRD to boot to the WIN 8.1 recovery environment and restore your PC using the image on the external USB drive.
    You can also use the MRD to restore a Custom Refresh Image (CRI) you can create. This CRI can save time consumed reconfiguring your PC compared to performing a Microsoft Refresh or Reset.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
    Errare humanum est.

  • Issue with Parent child dashboards using SWFLoader component

    Hello Gurus,
    I am using Parent-child dashboards approach in our project.
    I have multiple child files embedded in Parent dashboard using the SWFLoader (directly passing the URL as SWFLoader value) to load child dashboards. All the child, parent swf's are saved in the same intranet folders.
    When I open the parent SWF, everything loads fine in the intranet.
    But for some users, when they open from the intranet, the child dashboard doesnt load up properly or size of the dashboard gets reduced to a small version. (Iam sure that it has nothing to do with the access/privileges)
    Any thoughts/ideas what could be causing an issue with child dashboard/resizing of the child dashboard.
    Please help!
    regards,
    S R

    Check whether the machine has compatible flash version in error specific machine and your machine.

  • Issue with saving JPG's

    I have an issue with Photoshop CC that I am hoping is just a setting because at present it is a real PITA.
    I have photos in Lightroom that I have exported in JPG format. I want to bring them into PS and then apply a simple crop to them. I have the option to delete outside the crop area selected.
    Crop works fine but when I try to save I can simply save it as a JPG. Rather PSD comes up as the option. If I select JPEG from the dropdown the "Save as copy" is active and I end up with two images or I have to change the file name.
    Other versions let me open up JPGs, alter them and then save them as JPGs without issue so what is going on here?

    Usually when Photoshop defaults to PSD it means there's something about the document can't be saved in JPEG format - an extra channel (e.g., selection saved) or data beyond the edge of the crop (you've covered that) or the fact that it has a non-Background layer, or something...
    Can you screengrab your environment at the time when it wants to save as PSD (but without the file-save dialog blocking the view)?  Save the image as a PNG or JPEG and post it here via the little camera icon just above the editor box.
    -Noel

  • Hello Experts, i have issue with mime repository image with different languages ?

    Good day !
    I was facing the issue with images : we  are creating the images by using CSS tool  to generate a button. that image type is .png , this images we are importing into webdyunpro component as a mime object.
    These images are binided into button image source property. And i am writing the code for calling this button (this is uniq code for all languages).
    But all langaues are working fine for spanish(ES) langage only it was not displaying the image. it is displyind cross mark.
    Naming standard i ma mainintg for mime object name : Export_ES.png.(spanish).
    Please can any one help me on this .
    Regards,
    Venu

    Hi Kiran,
    Thanks for your Promt reply.
    1. i am creating different images for different languages.
      ex : english : Export_EN.png
             Spanish : Export_ES.png
    Code will be : here i am creating attribute and bing that attribute to button image source.
    me ->get_button_img
        EXPORTING
          im_button_id    = 'Export'
          im_button_value = 'IMG_EXPORT'
          im_type         = '.png'
        CHANGING
          ch_context_ele  = lo_el_images.
    'IMG_EXPORT' : attribute name
    method : get_button_img
       DATA: lv_img_name TYPE string,
            lv_lang     TYPE string.
    *        lv_jpg(4)   TYPE c VALUE '.jpg'.
      lv_lang  =  sy-langu .
      CALL FUNCTION 'CONVERSION_EXIT_ISOLA_OUTPUT'
        EXPORTING
          input  = lv_lang
        IMPORTING
          output = lv_lang.
      CONCATENATE im_button_id  '_' lv_lang IM_TYPE INTO lv_img_name.
      CALL METHOD CH_CONTEXT_ELE->set_attribute
        EXPORTING
          value = lv_img_name
          name  = im_button_value.
    here lv_img_name : Export_ES.png.
    But its not working.
    thank you

  • Issues with regard to images in mailforms the interaction center

    Hi experts,
    I'm having issues with the mailforms created in the manager IC role in CRM. When creating mailforms I want to add the logo of our company to the message. Therefore we use the 'insert image' icon. Till that point everything seems fine. However, when this mailform is used receivers receive a red cross where the picture was placed instead of the attached picture.
    Thanks in advance,
    Paul

    Hi Sigrid, thanks for your respons!
    In my situation the problem is more related to outbound mails. Creating a mailform in the IC manager part of the IC (including an image) goes well, the picture I add in the bottom part (by clicking the insert image icon) of the mail is viewed correctly. When IC email agents open the mailform to use it as a standard reply, they also see the view including the picture. However, the receipants of our mails get a red cross instead of the picture that was added. Do you have an idea how this can be solved?
    Best regards,
    Paul

  • Issue with instant ringback when using sip trunk to SP

    Hi all,
    We use CUCM 8.0.2.
    We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
    c2900-universalk9-mz.SPA.150-1.M3.bin
    Cisco CISCO2911/K9 (revision 1.0)
    Technology Package License Information for Module:'c2900'
    Technology Technology-package
                      Current       Type
    ipbase        ipbasek9      Permanent
    security      securityk9    Permanent
    uc              uck9            Permanent
    data           None            None
    We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
    We use 7945 and CIPC for our phones.
    We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
    Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
    Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
    Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
    Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
    Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
    Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
    Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
    Any ideas why this happens and how to stop it?
    I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
    Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
    voice service voip
    address-hiding
    mode border-element
    allow-connections sip to sip
    sip
      bind control source-interface GigabitEthernet0/0
      bind media source-interface GigabitEthernet0/0
      header-passing error-passthru
      early-offer forced
      midcall-signaling passthru
    interface GigabitEthernet0/0
    ip address x.x.x.x 255.255.255.252
    ip access-group acl.SIP-IN in
    no ip redirects
    no ip unreachables
    ip verify unicast reverse-path
    ip virtual-reassembly
    duplex full
    speed 100
    no cdp enable
    gateway
    timer receive-rtp 1200
    sip-ua
    connection-reuse
    gatekeeper
    shutdown
    dial-peer voice 1 voip
    description *** INBOUND CALLS FROM CARRIER ***
    translation-profile incoming SIPTRUNK-INCOMING
    session protocol sipv2
    incoming called-number #blah blah#
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 61 voip
    description **** WA, SA AND NT NUMBERS ****
    destination-pattern 0[8]........
    session protocol sipv2
    session target ipv4:<MY SP's SIP SERVER>
    incoming called-number 0[8]........
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 81 voip
    description **** MOBILE NUMBERS ****
    destination-pattern 0[4]........
    session protocol sipv2
    session target ipv4:<MY SP's SIP SERVER>
    incoming called-number 0[4]........
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 500 voip
    description *** INBOUND SIP TRUNK TO CUCM PUB ***
    translation-profile outgoing SIPTRUNK-CALLING-ADD-0
    preference 1
    destination-pattern 5[12]..
    session protocol sipv2
    session target ipv4:<OUR CUCM PUBLISHER IP>
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    Any help or a point in the right direction would be greatly appreciated.
    Cheers,
    Brett

    I ended up resolving this issue as follows:
    In CUCM, under Device > Device Settings > SIP Profile.
    I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
    Now, I get the expected delay before hearing ringback.
    Solved!

  • IWeb 3.04 with OS 10.8.2 on new iMac. Issues with saving.

    Sometimes changes save, sometimes they don't. Using Domain Cracker to open desired domain.sites2 files saved in the documents folder. Could that script be the source of the problem? 
    Back story is that we have a fairly large site developed on iWeb 1.x on an old 2006 MacBook running Tiger (10.4?). Hard drive crash resulted in new HD, installed box set Snow Leopard 10.6 and iWeb 3.0.4.  Then acquired a new iMac with Mountain Lion 10.8.2, installed the iWeb 3.0.4, copied the converted domain.sites2 files over. Made extensive changes, saved frequently, quit iWeb, the next day all changes area lost. Then tried experimenting with simple minor changes, save quit, relaunch, changes are saved properly. Try again, simple text edit, save, quit, relaunch, changes are lost. Sometimes the changes save, sometimes they don't.
    Who knows the definitive answer on iWeb 3.0.4 running on a new iMac under OS 10.8.2 on a new latest model iMac? Is Domain Craker a potential source of the problem?

    On the one hand you say you are using iWeb V 3.0.4 but at the bottom of your posr mention iWeb '08.
    iWeb '08 (V2) causes problems with saving when using Mountain Lion.
    Domain Cracker is just a script that allows you to choose a domain file to open in iWeb. It doesn't have anything to do with the running (or not) of iWeb.
    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Maybe you are looking for