Issues with Search Filter Criteria Button in Search Help

Hi ,
I have applied an elementary search help to a select option and this help is having four fields. The search help works fne and all the four fields are visible when i do a F4. Now , if i want to restrict the number of entries shown (the number of entries are huge) by clicking the "Search Filter Criteria" button , i dont see any of the four fields using which i can restrict the data . Do we need to do any configuration for this ??
Regards
Mayank

Hi,
in that search help itself you have a option called maximum number of hits, there is a impact if you restricted also.
Thanks & Regards,
Srinivasan.R

Similar Messages

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

Anyone had issues with on/off sleep button not working anymore

Anyone had issues with on/off sleep button not working anymore?

If there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, use virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn OFF iPhone. To turn ON, connect iPhone to power, charger or USB of computer.

There is any aupdate for macbook air 13" mid 2009 trackpad {with one long click button down} to help trackpad working fine with loin mac os x 10.7.1

there is any aupdate for macbook air 13" mid 2009 trackpad {with one long click button down}
to help trackpad working fine with loin mac os x 10.7.1

mohammedfromad dammam wrote:
there is any aupdate for macbook air 13" mid 2009 trackpad {with one long click button down}
to help trackpad working fine with loin mac os x 10.7.1
Not at this time. It would also be great to have an adjustment for sensitivity too.

We use dial up and upon updating to Firefox 10 we have had issues with facebook/ playing games...please help!

We use dial up and upon updating to Firefox 10 we have had issues with facebook/playing games...please help!

Hi nancybrendel,
Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
Hopefully this helps!

Issues with multiple hard drives (no luck searching)

Hi!
I've bought a 5th gen. Airport Extreme, and I have some issues with connecting multiple drives to it.
We've got multiple Macs in the house, and they have all been backed up on separate external hard drives.
One of these drives has been split into two partitions, one for backup and one for data. They are both formatted as GUID HFS+.
I've bought a powered USB-hub, and tried connecting the drives, but it doesn't work.
I get the following results:
- The AEBS only sees one of the drives.
- The AEBS sees neither of the drives.
- Everything seems to work, until I try using Time Machine on one of the drives, and everything stops working.
I've tried unplugging the AEBS, but I get nothing else than these issues.
This is my setup:
The AEBS:
The hub with the drives:
The hub:
I've tried searching numerous sites, but I haven't found an answer.
Some people have had luck downgrading to a previous firmware, but I can't for some reason.
Have any of you got some ideas how to fix it? I think I've tried almost everything.

The drives have been password protected.
I tried adding user accounts for access, but the password setting seemed to work better.

Issues with table filter during navigation between task-flows

Hello everyone,
I'm looking for a workaround to resolve two issues about the table filter. They are:
1) If I type something in a filter and I change tha page (in a different task flow) when I return on the first page there is the previous search plus the string "%*". Here the video example: http://screencast.com/t/FbVenZGm
2) In the same scenario, if I click enter on this filter the system returns this message error: "Attempt to set a parameter name that does not occur in the SQL: vc_temp_1 ". Here the video example: http://screencast.com/t/yMs6rNDF
I have found something interesting in this thread: task-flow table filtering behaviour related to bug 8602867
Anyway, I have implemented the solution reported in this document: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/april2012-otn-harvest-1609383.pdf (pp. 8-11). This solution works fine with my master table, but it doesn't with the detail table.
Have you any idea for this kind of behavior?
Thanks in advance,
Baduel

Sudipto,
each table has a binding on a page fragment in this way:
<af:table [...] binding="#{backingBeanScope.MyBackingBean.masterTable}">
<af:table [...] binding="#{backingBeanScope.MyBackingBean.detailTable}">
In the pageDef I have two methods, each one of the VOImpl class related to the table:
<methodAction IterBinding="MasterTableVO1Iterator"
id="clearOutstandingImplicitViewCriteriaMaster"
RequiresUpdateModel="true" Action="invokeMethod"
MethodName="clearOutstandingImplicitViewCriteria"
IsViewObjectMethod="true" DataControl="MyDataControl"
InstanceName="MyDataControl.MasterTableVO1"/>
<methodAction IterBinding="DetailTableVO2Iterator"
id="clearOutstandingImplicitViewCriteriaDetail"
RequiresUpdateModel="true" Action="invokeMethod"
MethodName="clearOutstandingImplicitViewCriteria"
IsViewObjectMethod="true" DataControl="MyDataControl"
InstanceName="MyDataControl.DetailTableVO1"/>
MyBackingBean class:
public class MyBackingBean {
private RichTable masterTable;
private RichTable detailTable;
/*getter methods here*/
public void setMasterTable(RichTable masterTable) {
this.masterTable = masterTable;
resetTableFilter(1);
public void setDetailTable(RichTable detailTable) {
this.detailTable = detailTable;
resetTableFilter(2);
/*This method returns the phase id */
private String printCurrenPhaseID() {
FacesContext fctx = FacesContext.getCurrentInstance();
Map requestMap = fctx.getExternalContext().getRequestMap();
PhaseId currentPhase=(PhaseId)requestMap.get("oracle.adfinternal.view.faces.lifecycle.CURRENT_PHASE_ID");
// System.out.println("currentPhase = "+currentPhase);
return currentPhase.toString();
public void resetTableFilter(int tab) {
String phase = printCurrenPhaseID();
FilterableQueryDescriptor queryDescriptor;
if(phase.startsWith("RENDER_RESPONSE")) { // Only in this phase the binding is ready
switch(tab) {
case 1:
queryDescriptor = (FilterableQueryDescriptor) getMasterTable().getFilterModel();
if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
queryDescriptor.getFilterCriteria().clear();
// PPR refresh a jsf component
AdfFacesContext.getCurrentInstance().addPartialTarget(getMasterTable());
break;
case 2:
queryDescriptor = (FilterableQueryDescriptor) getDetailTable().getFilterModel();
if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
queryDescriptor.getFilterCriteria().clear();
// PPR refresh a jsf component
AdfFacesContext.getCurrentInstance().addPartialTarget(getDetailTable());
break;
default: return;
invokeClearViewCriteria(tab);
public BindingContainer getBindings() {
return BindingContext.getCurrent().getCurrentBindingsEntry();
/* This method invokes the exposed method in my fragment */
public void invokeClearViewCriteria(int tab) {
BindingContainer bindings = getBindings();
OperationBinding operationBinding;
if(tab == 1)
operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaMaster");
else if(tab == 2)
operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaDetail");
else
return;
if(operationBinding != null) {
operationBinding.execute();
Finally I have two identical exposed methods in the VOImpl classes of the tables:
public void clearOutstandingImplicitViewCriteria() {
// we only want to remove the stuff that was added though the table
//filter (or a default search form)
// "__ImplicitViewCriteria__" is the magic name for this VC
ViewCriteria vcDefault = this.getViewCriteria(ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);
if (vcDefault != null) {
//Clear the stored values
vcDefault.clear();
//And refresh the collection
this.executeQuery();
Please note that this workaround works fine with my master table, but i does not with the detail table.
Thanks again.
Baduel

Issue with parameter/filter - trying to display null rows

This is how my data looks in the database
Order_ID ----- Vendor
ID123 NULL
ID234 ABC
ID456 NULL
ID001 CDE
I want to create an SSRS report with a filter for vendors
*All Vendors should be checked off by default
*Users should be able to select multiple vendors
So I started by creating the VendorDataSet, the query looks like
SELECT VendorName
FROM Vendor
WHERE Active = 1
*This query will return all active vendors stored in my vendor table
Then, I created my parameter @prmVendor and it looks like:
-Data Type: Text
-Allow blank value("")
-Allow multiples values
Available Values:
-Dataset: Vendor
-Value field: vendor_name
-Label field: vendor_name
The main query of the report looks like
Select Order_ID, Vendor
FROM Order
LEFT JOIN Vendors
ON Order.VendorID = Vendor.ID
WHERE Vendor IN (@prmVendor)
So at this point it does what is supposed to do except - that when I run the query with all the vendors selected,
the query will only return the ones with vendors populated.
Order_ID ----- Vendor
ID234 ABC
ID001 CDE
I've tried adding the following to my VendorDataSet:
SELECT VendorName
FROM Vendor
WHERE Active = 1
UNION ALL
SELECT '' -- I've also tried SELECT NULL
But when I run the report and look at the list of vendor displayed - it won't show the empty row in the vendor drop down filter
thus, my main query will ignore the orders with no vendors.
Any ideas on how to fix this issue?
-Alan

So I changed my VendorDataSet to look like this:
;WITH cteVendors AS (
SELECT VendorName
FROM Vendor
WHERE Active = 1
UNION ALL
SELECT ''
SELECT (CASE WHEN Vendor IS NULL THEN '' ELSE Vendor END) AS VendorName
FROM cteVendors
This allowed me to show an empty box in my drop down filter see link for
image
Is there a way to make some changes to my main query so this works? so if the user was to select the blank box the query will return something like :
Order_ID ----- Vendor
ID123 NULL
ID456 NULL
-Alan

Issue with a filter

I am having a really hard time applying the filter "Brush Strokes -> Angled Strokes" to a colored box, whether it's just a selection or a rectangular box.
I did this once and it worked (i.e. The box kept the same color and the correct filter was applied to it), but now I am trying to do it with a different box, whenever I access the Filter Gallery with the box selected, the color remains flat, even with the filter in question highlighted. I've tried everything I can think of, but it just seems like a weird glitch.. First time it worked, now it doesn't. Any idea what could be causing this?
Thanks a lot in advance.

New shapes on new layers don't have any layer styles for me. I don't recall running across an option for applying layer styles to new shapes.
Is it possible you're drawing pixels on the same layer? Layer styles are applied equally to whatever's on the entire layer.
As far as I know, new layer styles use whatever defaults you explicitly set for them. There are buttons such as the one shown below for setting your own default.
The [ ] Use Global Light feature is a bit special in that it uses one global angle for all layer styles (change any one and they all change) - the idea being that things look better when the shadows and highlights all imply the light is coming from the same direction.
Can you describe a specific case where the default you set isn't being used? I'll be happy to try to reproduce it.
-Noel

Issue with slideshow size and buttons.

I am having issues with the spry image slideshow with filmstrip. I can not figure out why the buttons disappeared. When I was installing the slideshow to the site I am pretty sure I only changed the size so that it would fit the page. Once I got that figured out I noticed the buttons where no longer there. Also the arrows for the thumbnail pictures would not work. I was able to make some adjustments to get the arrows to work with thumbnails. Still having problems with the play and next and previous buttons. They are not visible. Any help would be appreciated. The site is http://abbeyhelpsbrokenhearts.com/story.html
I have created a brand new page to test in dreamweaver. If I change the size of the width it puts a white box below the slideshow with the buttons below.

hiya
well , you are certainly getting some really good help now...its like you fell into a room with the best editors and shooters and everything and you can get a lot of information and run with it...find out a lot of things.
Some of it requires you follow through on your own as much as possible ( like you have already ) by reading and googling things you dont know, etc... this forum and these guys is how I learned a lot about this stuff in the past year or so...so listen to what they say....google what you dont understand....you cant go wrong.
now...about what you said...
I exported the test clip as an MPEG2-DVD and it gave me a video file with NO SOUND, a separate WAV sound file, and two xmp files. This is not what I was looking for.
I have a movie project on Adobe Premiere Pro CS4. I simply want to export/publish the movie, burn it onto a DVD using Windows DVD maker and have it as top quality, like it looks in the preview monitor on Premiere. Tell me how to do it.---
I dont use encore to burn a dvd, but use DVDit PRO. It wants exactly what you got when you exported to mpeg 2 dvd ....a video file without sound muxed.. and a separate wav file....
I know it sounds weird but thats the way the program burns the DVD....and that has to do with making the VOB files etc for the DVD...which is just the way it is....you see the vob files AFTER you burn the DVD if you look in the DVD...
anyway, mpeg 2, mpeg 4, all that highly compressed stuff ( as you said ) is highly compressed to FIT onto the media ( DVD ) or whatever....but it plays good and it looks good...and has NOTHING to do with anything except squishing stuff down to fit the media and looking ( viewing ) GOOD. the best movie you ever saw on DVD is mpeg 2 ..... turned into vob in the making of the DVD by the software that makes the DVD.
all these things are different animals ...what you edit , what you deliver, etc ....

Anyone else having issues with white iphone4 home button?

so i have come across this stuff here and there but i am pointing more towards people from India..
You all know how Pathetic apple is at India because of not having major share holding...
My White iPhone 4 purchased in july on the same date as launch in India has issues with the home button.. It sometimes becomes unresponsive.. Stays like that for 5-15 seconds as it varies and then starts working..
I don't understand if it is hardware or software issue.. Sometimes for weeks it doesn't happen and then it could happen way too much... i went to the iStore guys and they told me to restore it as its a software issue..
I wanted to know if any of you faced that and what did you do? did you get a replacement? since it happens occasionally i cant show the store guys that it is happening so they won't replace.

My experience with home button:
Mine did not work sometimes also; but I found this was due to "how" i was pressing the button. There must have been some dust under it because if you pressed it in a certain place; the button would press in but this would not register until you pressed really quite hard.
Pressing in any other place and the click seemed to register.
Try it and see if it is the same for you? Can you press your button in a place and it doesnt register (mine was at the top of the white square on the button)...
I had mine replaced under warranty from my Apple Store.

Issue with Update All Vaults button

I am having a relatively strange issue with the latest version of Aperture (3.3.2).
After the upgrade, my "Update All Vaults" button behaves strangely. In the past, if you pressed it, it went through the process of updating the vaults and then it turned from yellow to black. With the new version, if Aperture is not the foreground application, the button stays yellow, even right after updating all vaults.
It's not a major issue, but it's quite frustrating because you are never sure if you had updated your vaults or not.
Any ideas will be greatly appreciated.

I have exactly the sane problem, even if Aperture is the foreground application.
According to the manual this means:
Yellow: All masters in the library have been backed up, but a change has occurred to at least one version (such as an adjustment) that has not been backed up. The vault should be updated to safeguard your work.
I have updated all 3 vaults multiple times and they remain yellow. Is there any way to correct this, or alternatively find out which picture creates this problem?
Thanks
Pim

Issue with the home buton... HELP

So I just purchased my iPhone4 yesterday and here I am less than 24hrs later and there's an issue with the home button. Either the button won't work at all and I have to restart the phone, or its magically being held down and the voice control is activated and if it hears anything its automatically playing music. On top of this when I woke up it said that I needed to restore the phone and I did like four times and nothing happened. I haven't been this stressed out in forever, PLEASE help, there's a handsome reward if anyone can walk me through this issue, thanks!

Gryffindor87 wrote:
Back to an apple store or would AT&T work? Closest Apple store is an hour away >.<</div>
I would start with where you bought it and go from there.
Dave

More issues with 7.4.1 & 7.4.2 - help needed : tried the usual fixes.....

I have the dual band 2.4 or 5GHz model AEBS, Belkin powered 4 port hub, Canon IP1600 printer, 40GB & 120 GB HFS+ USB drives. Win 7 64bit & XP machines.
I only 2 weeks ago did the FW upgrade.
With prior to these 2 FW's, i had issues with my printer not printing the whole page, it would always cut mid last line and then freeze. Had to cycle the printer to get the page out. It would not necessarily print the 2nd time either. The HDD's going through a hub worked fine. I updated to 7.4.1 hoping that would fix the printer issue, it did not. I then began getting "disk repair needed" on both HDD's over the next week; culminating upon both HD's going corrupt.
I reformatted both and moved all my music/movies back, and all was good for a week. Then today, turned both drives on at different times, and both need disc repair again.
So i unplugged them and hooked them up to my Linux Mint rig, and there was no apparent corruption, and all the files were playable.
SO I updated to 7.4.2 tonight, and the printer issue is still happening. BUT the 2 HDD are just fine now, after the update....so this leads me to think there was/is an issue with the router? Oh, i tried to directly plug the HDD into the router as well b4 the most recent update but still disc needs repair....of course they have been working fine for the last 2 hours...
Anyone have any ideas? Im ready to pull my hair out...Thanks in advance.
Message was edited by: user2009

Hey Chris, thanks for responding, in my above post I mentioned my troubleshooting:
Since updating my iPhone 5S (T-Mobile) to both 8.0.1 and then 8.0.2 I've had more issues than I've ever had with any iOS in the past (with the exception of iPhone 4 running iOS 7, but clearly that is an older phone, not a 1 year old model like the 5S). Have tried resetting, powering off, etc too by the way.

Very serious issue with MSI K8N Neo2-FX: need urgent help!

Hi! I am facing the following problems:
1. 3D Mark 05 demo, COD2 single player and Half Life 2 become semi-frozen.
2. The audio loops, and audio & video go out of sync.
3.VPU Recover/Infinite loop issue DOES NOT kick in.
4. The semi frozen game responds poorly to mouse movement.
Note: All redundant processes and programs in Windows XP are closed. My system specs:
Athlon 64 3000+ E6
256 mb ddr333 kingston valueram + 256 mb ddr400 kingston valueram=512 mb ddr333 total memory running in dual channel mode @ 2.5-3-3-7 (RAM is OK, worked fine on my previous system)
MSI K8N Neo2-FX bios version 1.B0(latest) chipset: nforce 3 250gb http://www.msi.com.tw/program/produc...il.php?UID=649
gigabyte radeon 9600XT BIOS Part Number BK-ATI VER008.015.058.000 (Card stable at 1.6 V AGP, 1.5 V gave me VPU Recover; Card ran fine on my previous system)
Realtek ALC 850 onboard audio
Antec SL 450 450 watt PSU (new, voltages ok) latest drivers/bios/firmware for everything Windows XP Pro SP2 + all updates. Please help.

Quote from: Richard on 03-May-06, 08:40:18
bhanja_trinanjan,
If you can get 2.3.3.6 Mushkin, OCZ, or Corsair, then you would be the set.
PC-3200 or higher would be the way to go. If you ever plan on overclocking, then PC-4000 is the best option.
Take Care,
Richard
Thanks for your help. I am trying to locate Corsair dealers in Kolkata(My hometown). Are there any known issues with the K8N Neo 2 FX? I bought this motherboard just a few days back and I am facing so many problems.
Does this motherboard undervolt the AGP and RAM slots? Will I have to increase AGP and DDR voltage to make my system stable? Doesn't the raising of these voltages shorten the life of the video card and ram modules? I want to buy Corsair/OCZ/Mushkin. But in case it's unavailable, will Kingston RAM lead to an unstable system?

Issues with Search Filter Criteria Button in Search Help

Similar Messages

Maybe you are looking for