Issues with sent texts

My text messages are breaking up making it  unreadable by those who I send my messages to. Anyone have any suggestions of what I could do? Other iPhone users who are my friends have reported the same issues with my messages, howevery their messages aren't affected.
Thanks!

Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If Messages is activated but not sending texts, try Settings>Messages>Show subject field>Off.

Similar Messages

  • Issue with displaying text in BEx

    Hi all,
    We are facing an issue with displaying text in the query output.
    We have a master data carrying charac ' 0MATERIAL'.When i do maintain master data ,I am able to see medium description in the output.
    Now when i drag 0MATERIAL in bex designer and in properties set display to key and text(medium text), it shows me only the key and it shows some wierd text which is in no way related to the medium description ( that was shown under maintain master data)
    can anyone pls tell me why i am not able to see the medium description when executing the query that too when the text is loaded.
    Pls help
    Regards,
    Suchitra

    But what i wouldlike to know is what about the master data which is present in 0MATERIAL now?
    Nothing will happen to your data.
    Its showing there ...dosent that mean its present and activated?
    They are present n in active version.
    If u change any records they will be in M version..by activating the data...u are converting it to A version.
    Regards,
    Ram.

  • Issue with document text - converting from PDF to Word

    I have used Adobe Reader in the past with no issues.  Today, I tried to convert a PDF to a word document.  It worked, but the text all changed to wingdings font (even though it says it is Calibri).  Any suggestions?

    Hi marleighp23001196,
    Are you facing this issue with a specific file or with other word files too?
    Regards,
    Rahul

  • Issues with dynamic text box formatting

    I'm running into issues with using HTML formatting for a dymanic text field. I know these are quirky and I cannot figure out how to get the formatting proper.
    I have on my stage a dynamic text box called "content_txt" inside of a movie clip instance "content_mc". When it enters the frame, I fade the "content_mc" from alpha 0 to 100 using a timeline animation. In order for this to work, I have to embed the font in my "content_txt" text field. However, the only way I get get the HTML formatting to work is if I do not embed the font.
    The dymanic text field is set to render as HTML. In my actions layer, I set the text:
    this.content_mc.content_txt.htmlText = "<b>Hello world,</b> it is me again."
    In summary:
    1. If I do not embed the font, the alpha fade does not work but the HTML formatting does.
    2. If I embed the font, the alpha fade works but the HTML formatting does not.
    How do I resolve this? It's driving me nuts!

    How do you embed just one style?
    I've tried typing three words in the text field and formatting each (regular, bold, italic) but the text field just defaults to whichever format is first.
    Also, I tried embeding the whole character list and did not have success.

  • Issue with sent items disappearing from Outlook

    We are having an issue with many of our users who have had their sent items disappear from Outlook. We are running Exchange 2010 SP2 with Rollup 8. All users on Windows 7 appear to be working fine, it is just users on XP that are having the issue. All
    PCs are SP3 with updates applied. The messages were there previously, but the Sent folder shows empty as of Monday. They show correctly in OWA, it is just in Outlook itself that is the problem. If we enable cached mode the items populate, but our standard
    policy is to run online with no local PST. We have tried running Outlook with /clearviews and in Safe Mode, but this does not resolve the issue.

    Hi,
    From your description, all the sent items are correct in OWA. So the Exchange Server is ok.
    About this issue, I recommend you install all the latest Windows updates and check the result.
    Hope it helps.
    If there are any problems, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Mx.controls.Text zoom issue with wrapped text. Is this a bug?

    We have created a diagram drawing tool in Flex, but we are having a serious issue with zooming. Everything zoom fine expect the Text control if it contains wrapped text. At certain zoom levels, some of the text seems to disappear (usually text at the end). I have tried everything, embedding fonts, turning anti-aliasing on and off, setting anti-aliasing to normal or advanced, but it doesn't seem to fix the problem. Is this is a known bug?
    If you check out the pictures (see attachments), you will see that the part of the text ('34') disappears at a certain zoom level.
    There is another blog who suggest to embed the font and set the antiAliasType to ‘animation’ (http://www.mehtanirav.com/2008/08/20/zooming-text-area-in-flex-messes-up-word-wrap-bug%20), but this doesn't seem to work for me either. I don't know if I am doing this correctly though, but I embedded a font and called text.setStyle("fontAntiAliasType","animation"). However, 'animation' is not one of the  AntiAliasType contants. According to the official documentation, the AntiAliasType constants are 'advanced' or 'normal'.
    Any help will be appreciated.

    Try this:
    import javax.swing.*;
    import java.awt.event.*;
    import java.awt.*;
    import javax.swing.text.*;
    class textpaneColor extends JFrame {
       JTextPane tp = new JTextPane();
       JButton button = new JButton("color");
       public static void main(String args[]) {
          textpaneColor obj = new textpaneColor();
          obj.showMe();
       void showMe() {
          button.addActionListener(new buttonListener());
          setSize(200,200);
          getContentPane().setLayout(new BorderLayout());
          getContentPane().add(tp, BorderLayout.CENTER);
          getContentPane().add(button, BorderLayout.SOUTH);
          setVisible(true);
       class buttonListener implements ActionListener {
          public void actionPerformed(ActionEvent e) {
             SimpleAttributeSet set=new SimpleAttributeSet();
             StyleConstants.setForeground(set,Color.BLUE);
             StyledDocument doc=tp.getStyledDocument();
             doc.setParagraphAttributes(0,999999,set,true);
    };o)
    V.V.

  • GoDaddy IMAP issue with "Sent Items"

    There's some long standing issues with GoDaddy IMAP and Apple Mail.  GoDaddy is using Courier-IMAP 3.1.0.5.  The worst of the issues seems to be the fact that if you store your Sent Items on the Server, your log gets spammed with these two message (I'm removed the call stack) over and over and it also seems to degrade performance while Mail tries to traverse the folder hierarchy even though on the surface everything seems to be working.  Mail is spending an inordinate amount of time trying to create this "Sent_Items" mailbox and then failing... over and over...
    Aug 11 09:32:04 seven Mail[9613]: *** Assertion failure in -[IMAPAccount _IMAPMailboxForMailboxUid:name:createIfNeeded:], /SourceCache/Message/Message-1244.3/Accounts.subproj/IMAPAccount.m:1336
              Expected mailboxUid for Sent_Items
    Aug 11 09:32:04 seven Mail[9613]: *** Assertion failure in -[IMAPAccount _IMAPMailboxForMailboxUid:name:createIfNeeded:], /SourceCache/Message/Message-1244.3/Accounts.subproj/IMAPAccount.m:1344
              Didn't create IMAPMailbox for (null)
    Seems to me the reason this is happening has something to do with the fact that the "Sent Items" system folder is internally referenced as "Sent_Items" and they are being treated as synonyms for each other on the IMAP side while Apple Mail is seeing them as 2 different folders and failing when it thinks it needs to create the Sent_Items folder on the server. 
    I'm willing to accept that I could be completely wrong about this, or I could be right, but neither GoDaddy or Apple side seems interested in looking into it and it's very frustrating.  Here's why I think it might have something to do with it:
    [ben@seven][~]$ telnet imap.secureserver.net 143
    Trying 72.167.82.19...
    Connected to imap.where.secureserver.net.
    Escape character is '^]'.
    * OK [CAPABILITY IMAP4rev1 UNSELECT STARTTLS ID CHILDREN NAMESPACE IDLE] Courier-IMAP ready. Copyright 1998-2004 Double Precision, Inc.  See COPYING for distribution information.
    1 LOGIN [email protected] password
    1 OK LOGIN Ok.
    2 LIST "*" "*"
    * LIST (\NoInferiors) "/" "INBOX"
    * LIST (\NoInferiors) "/" "Bulk Mail"
    * LIST (\NoInferiors) "/" "Drafts"
    * LIST (\HasNoChildren) "/" "Email_Templates"
    * LIST (\NoInferiors) "/" "Send_Later"
    * LIST (\NoInferiors) "/" "Sent Items"
    * LIST (\NoInferiors) "/" "Trash"
    2 OK  Success
    3 STATUS "Sent Items" (UIDVALIDITY)
    * STATUS "Sent_Items" (UIDVALIDITY 1109891090)
    3 OK STATUS completed.
    4 STATUS "Sent_Items" (UIDVALIDITY)
    * STATUS "Sent_Items" (UIDVALIDITY 1109891090)
    4 OK STATUS completed.
    5 LOGOUT
    * BYE IMAP server shutting down
    5 OK LOGOUT completed
    Connection closed by foreign host.
    If you login to the GoDaddy webmail system and bring up the properties of the "Sent Items" folder, it's referenced as "INBOX.Sent_Items" and it's the only folder whose internal name doesn't match the name given in the LIST command.
    I really wish that someone from Apple or someone from GoDaddy would take a look at this seemingly simple thing to fix and just make it work.  It appears to not be an issue for other IMAP clients, or on the iOS devices, though I suppose that my iPhone could be logging all this same stuff internally.
    Hopefully GoDaddyGuy will come to the rescue once again and get this resolved.  If anyone has been able to actually store their Sent Items in the Sent Items system folder and not get this message over and over, let me know.  This has nothing to do with the IDLE command or "Use this mailbox for..." or IMAP prefix (which if you run the NAMESPACE command isn't defined) or any other suggestions that have been given previously. I've already exhausted all the different combinations.
    Sincerely,
    Ben Morin
    CTO
    Sevence, LLC

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Issue with Full-Text (FTS) master merge on SQL Server 2012 SP2

    Hi,
    On my current project we have really annoying issue with master merge process that occurs after Full Population of FTS Index.
    Let me describe our process: we have continuous build that setup environment and run unit tests after each commit in our source control. For each run we create new DB (on the same SQL Server) then fill it with test data and run unit tests. Sometimes unit
    tests failed because FTS Index population cannot finish in time.
    We have constantly seeing in [sysprocesses] table lots of sessions with wait type FT_MASTER_MERGE that block our tests
    In FTS log we have following error:
    The master merge started at the end of the full crawl of table or indexed view [TABLENAME] failed with HRESULT = '0x80000049'. Database ID is '45', table id is
    706101556, catalog ID: 5.
    Here is an example of how we create FTS catalog and add table to it (As you can see it's created with auto change tracking together with
    index update in background):
    -- Create FTS catalog
    EXEC sp_fulltext_catalog 'WilcoFTSCatalog', 'create'EXEC sp_fulltext_table 'Users', 'create', 'WilcoFTSCatalog', 'PK_Users'
    EXEC sp_fulltext_column 'Users', 'UserId', 'add'
    EXEC sp_fulltext_column 'Users', 'Name', 'add'
    EXEC sp_fulltext_table 'Users', 'activate'
    EXEC sp_fulltext_table 'Users', 'start_change_tracking'
    EXEC sp_fulltext_table 'Users', 'start_background_updateindex'
    Does anybody know what is the root cause of this issue and what should be done to avoid it?
    Thank you in advance,
    Olena Smoliak

    Hi,
    On my current project we have really annoying issue with master merge process that occurs after Full Population of FTS Index.
    Let me describe our process: we have continuous build that setup environment and run unit tests after each commit in our source control. For each run we create new DB (on the same SQL Server) then fill it with test data and run unit tests. Sometimes unit
    tests failed because FTS Index population cannot finish in time.
    We have constantly seeing in [sysprocesses] table lots of sessions with wait type FT_MASTER_MERGE that block our tests
    In FTS log we have following error:
    The master merge started at the end of the full crawl of table or indexed view [TABLENAME] failed with HRESULT = '0x80000049'. Database ID is '45', table id is
    706101556, catalog ID: 5.
    Here is an example of how we create FTS catalog and add table to it (As you can see it's created with auto change tracking together with
    index update in background):
    -- Create FTS catalog
    EXEC sp_fulltext_catalog 'WilcoFTSCatalog', 'create'EXEC sp_fulltext_table 'Users', 'create', 'WilcoFTSCatalog', 'PK_Users'
    EXEC sp_fulltext_column 'Users', 'UserId', 'add'
    EXEC sp_fulltext_column 'Users', 'Name', 'add'
    EXEC sp_fulltext_table 'Users', 'activate'
    EXEC sp_fulltext_table 'Users', 'start_change_tracking'
    EXEC sp_fulltext_table 'Users', 'start_background_updateindex'
    Does anybody know what is the root cause of this issue and what should be done to avoid it?
    Thank you in advance,
    Olena Smoliak

  • Issues with Set Text of Container

    I'm creating a gallery using OnClick commands. For the most part it works fine, but every so often a link will display photos instead of the text it's supposed to put in for a link. I have a div with a set of main "links" (they're not actual links but rather text with OnClick commands,) a div where the photos go, and a couple of divs for where more "links" show up depending upon which photos are showing. A version can be seen at www.beckettfurniture.com/repair. Using Fabric Chairs as an example, I want to put "Page: 1" in the div under "Case: 1, 2." However, when I do that I get the second photo from each case showing up with:
    Case: (the photo here) and then the following code.
    ')" onmousedown="MM_changeProp('repair-case1','','color','#CB3332','SPAN')" onmouseover="MM_changeProp('repair-case1','','color','#CB3332','SPAN')" onmouseout="MM_changeProp('repair-
    Then there's
    case1','','color','#000','SPAN')">1
    and another photo
    then this
    ')" onmousedown="MM_changeProp('repair-case2','','color','#CB3332','SPAN')" onmouseover="MM_changeProp('repair-case2','','color','#CB3332','SPAN')" onmouseout="MM_changeProp('repair-case2','','color','#000','SPAN')">2
    Then it does the same with the next div tag. The odd thing is that I just added an onclick command for the last div tag, and yet it affected 2 of them. Any suggestions as to how to get Dreamweaver to stop messing up like this?

    I posted a version at http://www.beckettfurniture.com/repairerror.html to show the issue. I let Fabric Chairs have the error in case you need to see it. When you click on Fabric Chairs you'll see what I mean.
    Also, the link above should be http://www.beckettfurniture.com/repair.html.

  • Issue with label text wont change correctly.

    Hi All,
      I have an issue.  I usually program with C#, PHP, html etc.  trying to learn Adobe Flash now so i downloaded the trial version which has 30 days trial.  tried to create and follow the tutor for click ball which all of the code is the same but it doesnt work. 
    I triple check the code and its all right but it still not working.  so i commented out all of the code and has a simple code of changing the text of the label.  i set the text to "abcdefg" and but it only show "cdef".  i expanded the width of the label so width is not the issue.  trying to search for the limitation of the trial but i dont see any.  trying to test this before i buy it.  Does anybody know why?  again, coding is not an issue, it does change but not changing correctly.  i try to set to another value it always show partially only.  what is going on?
    Thanks you for your help in advance.

    Try embedding the font - might fix missing characters.
    1) Select the TextField on the Stage
    2) In Properties pane, next to font name selector, click Embed and play with the Dialog
    3) Don't forget to select suitable character ranges

  • Performance issue with Oracle Text index

    Hi Experts,
    We are on Oracle 11.2..0.3 on Solaris 10. I have implemented Oracle Text in our environment and I am facing a strange performance issue that is happening in our environment.
    One sql having CONTAINS clause is taking forever - more than 20 minutes and still does not complete. This sql has a contains clause and an exists clause and a not exists clause.
    Now if I remove the exists clause and a not exists clause , it completes fast. but with those two clauses it is just taking forever. It is late night so i am not able to post the table and sql query details and will do so tomorrow but based on this general description, are there any pointers for me to review?
    sql query doing fine:
    SELECT
        U.CLNT_OID, U.USR_OID, S.MAILADDR
    FROM
        access_usr U
        INNER JOIN access_sia S
            ON S.USR_OID = U.USR_OID AND S.CLNT_OID = U.CLNT_OID
        WHERE U.CLNT_OID = 'ABCX32S'
        AND CONTAINS(LAST_NAME , 'TO%' ) >0
    --sql query that hangs forever:
    SELECT
        U.CLNT_OID, U.USR_OID, S.MAILADDR
    FROM
        access_usr U
        INNER JOIN access_sia S
            ON S.USR_OID = U.USR_OID AND S.CLNT_OID = U.CLNT_OID
        WHERE U.CLNT_OID = 'ABCX32S'
        AND CONTAINS(LAST_NAME , 'TO%' ) >0
    and exists (--one clause here wiht a few table joins)
    and not exists (--one clause here wiht a few table joins);
    --Now another strange thing I found is if instead of 'TO%' in this sql, if I were to use 'ZZ%' or 'L1%' it works fast but for 'TO%' it goes slow with those two exists not exists clauses!
    I will be most thankful for the inputs.
    OrauserN

    Hi Barbara,
    First of all, thanks a lot for reviewing the issue.
    Unluckily making the change to empty_stoplist did not work out. I am today copying the entire sql here that has this issue and will be most thankful for more insights/pointers on what can be done.
    Here is the entire sql:
    SELECT U.CLNT_OID,
           U.USR_OID,
           S.EMAILADDRESS,
           U.FIRST_NAME,
           U.LAST_NAME,
           S.JOBCODE,
           S.LOCATION,
           S.DEPARTMENT,
           S.ASSOCIATEID,
           S.ENTERPRISECOMPANYCODE,
           S.EMPLOYEEID,
           S.PAYGROUP,
           S.PRODUCTLOCALE
      FROM    ACCESS_USR U
           INNER JOIN
              ACCESS_SIA S
           ON S.USR_OID = U.USR_OID AND S.CLNT_OID = U.CLNT_OID
    WHERE     U.CLNT_OID = 'G39NY3D25942TXDA'
           AND EXISTS
                  (SELECT 1
                     FROM ACCESS_USR_GROUP_XREF UGX
                          INNER JOIN ACCESS_GROUP RELG
                             ON     RELG.CLNT_OID = UGX.CLNT_OID
                                AND RELG.GROUP_OID = UGX.GROUP_OID
                          INNER JOIN ACCESS_GROUP G
                             ON     G.CLNT_OID = RELG.CLNT_OID
                                AND G.GROUP_TYPE_OID = RELG.GROUP_TYPE_OID
                    WHERE     UGX.CLNT_OID = U.CLNT_OID
                          AND UGX.USR_OID = U.USR_OID
                          AND G.GROUP_OID = 920512943
                          AND UGX.INCLUDED = 1)
           AND NOT EXISTS
                      (SELECT 1
                         FROM    ACCESS_USR_GROUP_XREF UGX
                              INNER JOIN
                                 ACCESS_GROUP G
                              ON     G.CLNT_OID = UGX.CLNT_OID
                                 AND G.GROUP_OID = UGX.GROUP_OID
                        WHERE     UGX.CLNT_OID = U.CLNT_OID
                              AND UGX.USR_OID = U.USR_OID
                              AND G.GROUP_OID = 920512943
                              AND UGX.INCLUDED = 1)
           AND CONTAINS (U.LAST_NAME, 'Bon%') > 0;
    Like I said before if the EXISTS and NOT EXISTS clause are removed it works in sub-second. But with those EXISTS and NOT EXISTS CLAUSE IT TAKES ANY WHERE FROM 25 minutes to more than one hour.
    NOte also that it was not TO% but Bon% in the CONTAINS clause that is giving the issue - sorry that was wrong on my part.
    Also please see below the ORACLE TEXT index defined on the table ACCESS_USER:
    --definition of preferences used in the index:
    SET SERVEROUTPUT ON size unlimited
    WHENEVER SQLERROR EXIT SQL.SQLCODE
    DECLARE
       v_err       VARCHAR2 (1000);
       v_sqlcode   NUMBER;
       v_count     NUMBER;
    BEGIN
       ctxsys.ctx_ddl.create_preference ('cust_lexer', 'BASIC_LEXER');
       ctxsys.ctx_ddl.set_attribute ('cust_lexer', 'base_letter', 'YES'); -- removes diacritics
    EXCEPTION
       WHEN OTHERS
       THEN
          v_err := SQLERRM;
          v_sqlcode := SQLCODE;
          v_count := INSTR (v_err, 'DRG-10701');
          IF v_count > 0
          THEN
             DBMS_OUTPUT.put_line (
                'The required preference named CUST_LEXER with BASIC LEXER is already set up');
          ELSE
             RAISE;
          END IF;
    END;
    DECLARE
       v_err       VARCHAR2 (1000);
       v_sqlcode   NUMBER;
       v_count     NUMBER;
    BEGIN
       ctxsys.ctx_ddl.create_preference ('cust_wl', 'BASIC_WORDLIST');
       ctxsys.ctx_ddl.set_attribute ('cust_wl', 'SUBSTRING_INDEX', 'true'); -- to improve performance
    EXCEPTION
       WHEN OTHERS
       THEN
          v_err := SQLERRM;
          v_sqlcode := SQLCODE;
          v_count := INSTR (v_err, 'DRG-10701');
          IF v_count > 0
          THEN
             DBMS_OUTPUT.put_line (
                'The required preference named CUST_WL with BASIC WORDLIST is already set up');
          ELSE
             RAISE;
          END IF;
    END;
    --now below is the code of the index:
    CREATE INDEX ACCESS_USR_IDX3 ON ACCESS_USR
    (FIRST_NAME)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('LEXER cust_lexer WORDLIST cust_wl SYNC (ON COMMIT)');
    CREATE INDEX ACCESS_USR_IDX4 ON ACCESS_USR
    (LAST_NAME)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('LEXER cust_lexer WORDLIST cust_wl SYNC (ON COMMIT)');
    The strange thing is that, like I said, If I remove the exists clause the query returns very fast. Also if I modify the query to use only one NOT EXISTS clause and remove the other EXISTS clause it returns in less than one second.  Also if I remove the EXISTS clause and use only the NOT EXISTS  clause it returns in less than 4 seconds. But with both clauses it runs forever!
    When I tried to get dbms_xplan.display_cursor to get the query plan (for the case of both exists and not exists clause in the query), it said that previous statement's sql id was 0 or something like that so that I was not able to see the query plan. I will keep trying to get this plan (it takes 25 minutes to one hour each time but will get this info soon). Again any pointers are most helpful.
    Regards
    OrauserN

  • Formatting issues with quoted text in replies

    Whenever I reply to a sender, it adds extra leading to the original (quoted) text -- otherwise it seems to keep the other characteristics. How can I fix this? It makes my reply messages really long, and I don't see any solutions in the formatting prefs.

    I have a similar problem in that spaces are added between lines of text in the quoted messages when I select "Reply To." I have found no solution, but the problem can be corrected with patience by deleting the added spaces one by one while your response message is in the "Reply To" mode, that is before it is sent.

  • Font color issue with animated text in Captivate 5

    When I prepare a new animated text and open the property and then click the square to choose a color , I only get a  little part of the color panel (when I click the color box) and I have  no possibilities to enter the color code either:
    I'm working with a Windows XP, 64 bits desktop and I have Captivate 5 version 5.0.1.624.
    Any ideas to solve this issue would be appreciated as it is becoming urgent for me.

    @Lieve: You're on the French version of Captivate 5 aren't you?
    Can you provide a screenshot of what the Animated Text font colour dialog looks like on your PC and upload it here?
    This is what that box looks like for me:
    It seems that on this user's PC the colour picker isn't able to float on top of the dialog as it should.
    I encouraged Valerie to post her issue on this forum in the hope that one of the Captivate developer technicians would chime in with a possible solution.  I think this one has got to be some kind of bug due to a language version of Cp.

  • Display issue with Long Text in Smartform

    Hi All,
    We have a custom smartform, where we are displaying the Invoice Item level details.
    The Item description (InvoiceItemItem Text) is of about 1000 character length and a variable v_temp with 2000 length has been defined and saved.
    In debug mode, the complete text is saved in the variable v_temp.
    The same variable is placed in the smartform to display the complete text.
    But the complete Text is not getting displayed and only the system displays 256 char.
    How to resolve this issue?
    Regards
    Pavan

    Hi,
    Another workaround will be to define internal table with a field of lenght 256, and use the function module RKD_WORD_WRAP to split the string (v_temp) into 256 characters length. Now loop at this internal table and print the same.
    Regards,
    Swarna Munukoti.

  • Issue with sent emails!??

    Hi and thanks for reading,
    I have the same email account Yahoo on my iPhone 4 and iPad2.
    If I start writing an email and I am offline, as soon as I send it it goes to the "mail awaiting to be sent" folder.
    The strange thing is that while I can still edit it on my iphone, this operation is impossible on the iPad.
    Only if you save a message on the draft folder you can access it again for editing.
    What is the reason of this annoying thing on the iPad?
    Thanks bye

    The outgoing mail saved as drafts issue, results when you are composing a message, Mail saves it to drafts folder on the server. It's supposed to removed the draft version when sending but often it does not, leaving you confused over whether the message has been sent.
    You can select to save draft messages to On My Mac. You won't have access to your drafts on other devices with this option, but no more doubt over a left over message in drafts.
    Gmail is not standard IMAP. Getting the settings correct is difficult.You need to log into your browser to make some of the selections.
    Trash/delete are not the same thing. Trash really trashes where delete actually removes the label and moves the message to All Mail.
    To make matters even more confusing, the setup for Apple Mail and Microsoft Outlook for Mac are different. For example, the settings for Sent mail.
    When sending from Gmail’s server, your sent messages will be automatically copied to the [Gmail]/Sent folder. By default Outlook 2011 will set Sent to “Don’t store a copy of Sent Messages”, but Mail won't let me select this option.
    Also confusing is setting Mail's folder for Sent, Drafts, Trash and Junk. If you see a [Gmail] folder list with folders, you need to select the folder to be used by Mail. Under Mailbox in the Menu bar, select Mailbox > Use this mailbox for
    This article will help get you started with setting your Gmail account settings in your browser, but as I noted Mail and Outlook are not exactly alike. Connect Outlook for Mac 2011 to Gmail’s IMAP service http://www.officeformachelp.com/2012/12/connect-outlook-for-mac-2011-to-gmails-i map-service/
    MailTab Pro for Gmail is on sale right now for 99¢. AirMail $1.99 is also very popular. Both on Mac App Store (MAS) and work great with Gmail.
    Hope this helps!

Maybe you are looking for

  • Error in Receiver File adapter using File content Conversion

    Hi, I am getting the following error in the receiver file adapter. Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSep

  • How to get the Application name/fullpath in a servlet deployed in WebLogic

    Hi , Just like we can get the domain root directory from weblogic.management.DomainDir String root = DomainDir.getRootDir() ;and domain name from weblogic.management.configuration.DomainMBean DomainMBean domainMBean = MBeanUtils.getDomainMBean(); Str

  • Save as Jpeg

    I have created a picture with about three or four layers, a PSD file now. It is a panoramic shot I added a layer to make stars. When I try to save the file from a PSD file to a Jpeg one of the layers disappears. I have tried to save it as a tiff and

  • Uploading Video into Apex workspace

    Hi, I am trying to upload a video into a workspace on apex.oracle.com, and I am having trouble finding any instructions on how to do so. Does anyone know how to upload a video into an apex workspace of if it can even be done? Thank You, Tami

  • Cool features of the Kin Twom(if you are considering one or want to know more about your phone)

    1. Surf the web and talk at the same time - I was watching a commercial for the AT&T iphone talking about how it could surf and talk at the same time, so I decided to test the kin out as well. Turns out, the KIN is easily capable of doing this! An ex